Remove references to XKB and explain what to do if
pkg-config is missing or unwanted.
Change-Id: I099bf01ff49e1b8f6e822a50f0fe4904965a7a9f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some mkspecs do not support c++ strict mode.
We should allow them to build Qt with GNU extenstions.
Change-Id: I0d76cf95355b38953e3475773ec5474c856e1370
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Allow QML modules to request installing QML files on the file system
regardless of whether the QML files are embedded to resources.
Qt Quick Controls need both; external QML files, that are prioritized
over compiled resources, can be left out from the final deployment
package.
The desired setup can be configured as follows:
CONFIG += install_qml_files builtin_resources qtquickcompiler
With this, there is no need to write custom install/copy/qrc rules
for QML files.
Change-Id: I2ff2974b64efaea341b6ebb4c9fc2612497d7a33
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For "import MyModule", the QML engine looks for a qmldir file in
$eachImportPath/MyModule.
One of the built-in import paths is ":/qt-project.org/imports". This is
meant for static "plugins", where the resources and the plugin are already
inside the binary image.
For dynamic plugins, the qmldir file is what enables the QML engine to
find the plugin in the first place, so it makes no sense to embed it
inside the plugin's resources.
Change-Id: I29f006efb58d91f7e5212c347087535b06e8c637
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For correct debug/ and release/ suffix substitution and thus avoid
concurrent access to generated files, we have to declare the output
directory variable used by qtquickcompiler.prf in qtdeclarative here and
enable it for substitution.
Change-Id: Id8483daffdf1b9990396c55f7bc0d08a2f65cafd
Task-number: QTBUG-66675
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The change causes a crash when compiling the xkbcommon 3rdparty
library and compile failures (qtimageformats on Android).
This reverts commit a47cb14680.
Task-number: QTBUG-67326
Task-number: QTBUG-67327
Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated files should be added to RESOURCES with an absolute path.
Task-number: QTBUG-67011
Change-Id: Ief82b576824df9abd0901970f076e30dfe57b7d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When Qt is configured for both debug and release, and frameworks are
enabled, we produce two dynamic libraries inside each framework, eg:
QtCore.framework/QtCore
QtCore.framework/QtCore_debug
When building an executable against these frameworks, we pass -framework
QtCore, and the resulting executable will have its LC_LOAD_DYLIB load
commands pointing to e.g.:
@rpath/QtCore.framework/Versions/5/QtCore
When running the executable, the dynamic loader will load the dynamic
library dependencies based on these load commands.
By setting the DYLD_IMAGE_SUFFIX environment variable at runtime to
'_debug', the dynamic loader will prefer the debug versions of each
library inside the frameworks.
Unfortunately the use of an environment variable to choose debug or
release versions leaves room for mismatches between the executable
and the libraries that are loaded. An executable built in debug
mode will at runtime pick up the release versions of the Qt libraries
unless the DYLD_IMAGE_SUFFIX has also been set to match the build
configuration of the executable.
This results in confusing situations such as building your application
in debug mode, and then stepping into Qt code but not getting any
symbols. Qt Creator has an option to run the application with
DYLD_IMAGE_SUFFIX set, but this is not enabled by default due
to the startup cost of loading the Qt debug libraries.
More critically, it results in tests failing when the tests are using
QTest::ignoreMessage to ignore warnings produced by Qt, and these
calls are ifdefed (correctly) inside QT_NO_DEBUG, as the test
(built in debug mode) will then expect warnings from Qt, but those
warnings are not emittet, as the test is run against the release
version of the Qt libraries.
To mitigate this mismatch, we now link the Qt frameworks using
an explicit suffix, just like we would for no-framework builds
on macOS, for debug and release builds on Windows, and for
normal builds on other Unixes, leaving the dependency chain
for the application predictable:
@rpath/QtCore.framework/Versions/5/QtCore_debug
This also conceptually matches how Xcode builds applications and
frameworks, where it never relies on DYLD_IMAGE_SUFFIX, and instead
uses two separate build directories, one for each configuration.
The change means that Qt Creator will always load the Qt debug
libraries if the application is built in debug mode. For Qt
development this is a good thing, as you expect to be able to
step into Qt code. For our users, the added startup cost can
be mitigated by shipping our binary packages as release-only,
but with separate debug info enabled.
Change-Id: Ib9f1f2dab90ed00b9fb011200e3a69c71955e399
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some tests are not written to handle running on a retina screen,
resulting in additional test failures when trying to fix a CI test
failure on a local retina-enabled machine.
Change-Id: I0fed33c38792b686ac83abba2bfbc45623382200
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On Apple OSes, both compilers and linkers are given an absolute path.
For consistency, the same should be done with the C linkers.
The change is also a convenience to the MacPorts project,
which actively discourages ambiguous compiler names.
(https://trac.macports.org/wiki/UsingTheRightCompiler).
Change-Id: Ic1885aed825340696e9fde766788eebf51de3ff6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I7d5f211e2441415134c5905b159b41dc3b2b231b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is needed to be compatible with latest Qualcomm BSP releases.
This patch also makes it possible to select HW layer via
QT_OPENWFD_CLIENT_ID and QT_OPENWFD_PIPELINE_ID environment variables.
Change-Id: Ie795b21afc61a1de7c1d0b52cdb30a754e3f8266
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit 00f693d3e5046999270c92731e34a3e7fcd01c6b)
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and make use of it.
it's a logical continuation of the 'arch' term, and will be used also in
qt3d's configure.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I940917d6763842499b18fffd1514c96889a0cc63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
with 40e87491 merged, 'QMAKE_CXXFLAGS' variable in
'win32-g++' toolchain became defined via 'QMAKE_CFLAGS'.
the similar can be found in 'win32-clang-msvc' and
'win32-icc' toolchains too.
this works for now, because such definitions just duplicates code
from includes, like 'gcc-base.conf', 'msvc-desktop.conf', etc.
but it would became broken, if changes would be applied to
'QMAKE_CXXFLAGS' definitions in that includes, prior
to the redefinitions in 'win32-*/qmake.conf' toolchains.
thus 'QMAKE_CXXFLAGS' definitions in 'win32-*/qmake.conf' toolchains
should not depend on 'QMAKE_CFLAGS' and be done explicitly.
in order to apply this change correctly to 'win32-icc' toolchain,
its 'QMAKE_CFLAGS' variable should become dependent on definitions
in the includes, similar to 'win32-clang-msvc' and
'win32-msvc' toolchains.
Change-Id: I5e820e44a769a590ba63f70dcb3a115311093311
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
contains() interprets the regexp as being implicitly
anchored, so the leading part of the path needs to be
explicitly matched.
Change-Id: I1efa07dc99bb2db1717d2a66621899e23c144164
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
$$RCC_DIR can be absolute, so simple concatenation with $$OUT_PWD is
bound to fail.
Change-Id: Ibd80c49656c0e03b8a86ebca851af106cced08fb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in non-prefix configs, one has to differentiate between the module's own
build dir and qtbase's build dir, because the forwarding headers are
placed in -outdir under include/, while the actual headers end up in the
real build dir under src/.
Change-Id: I1d8ac904556b354bd113995316ba11dd6560a70d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Right now we are using the C++ compiler here, which relies on
the compilers automatically switching mode. This behavior is also
deprecated in newer clang versions and block clang developer
builds.
Task-number: QTBUG-64822
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I4d3c00ac528a45934c85777f42d243d0fe367c92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This commit introduces minimal support for instrumentation within Qt.
Currently, only LTTNG/Linux and ETW/Windows are supported.
Change-Id: I59b48cf83acf5532a998bb493e6379e9177e14c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
'win32-icc' toolchain:
- remove duplicated angle/vulkan includes.
'win32-g++' toolchain:
- place angle/vulkan includes before the unrelated compiler-related
variable re-definitions, similarly to the 'win32-clang-msvc',
'win32-icc', and 'win32-msvc' mkspecs.
Change-Id: Ie04bc9fb1d51ec0366b42713439f680e51214bbc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The PRODUCT_BUNDLE_IDENTIFIER property was not defined in the Xcode
project file and therefore the build would fail.
This fixes a regression introduced by 0749ba2c5e.
Task-number: QTBUG-65673
Change-Id: I8089b36d86588223ec34859af7388c99a3574d8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Build systems such as Meson heavily rely on pkg-config to get build
flags.
-DQT_{module}_LIB isn't exported in .pc files which makes Meson unable
to build some codes out of the box.
Change-Id: I806998f19f815e05a47b60129977e52587b38d47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
mingw-w64 toolchain:
- remove 'QMAKE_CFLAGS_AESNI' and 'QMAKE_CFLAGS_SHANI' definitions,
which are already set in 'gcc-base.conf' toolchain; this is
a continuation of 77347a36 relating variables, introduced in 5.10,
- remove 'gcc-base.conf' duplicate inclusion, left after eef2d1af
was merged into 5.10.
Change-Id: I328def916ccfb93c3f6b8336eb8801defbac37ae
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
such a project structure violates the assumption that the referenced
resources are specified relative to the sub-project root, so we must
resolve them to absolute paths manually.
Task-number: QTBUG-65753
Change-Id: I8bcd5c6e7d7c6a713e5fcd3668be7d2f23169501
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
mingw-w64 toolchain:
- add missing compiler definitions, similar to
'msvc-desktop.conf' toolchain,
- describe the reasons of missing compiler definitions, available in
'msvc-desktop.conf' toolchain,
- add missing 'QMAKE_CXXFLAGS' and 'QMAKE_CXXFLAGS_WARN_ON' variables,
similar to 'msvc-desktop.conf' toolchain.
ICC on Windows toolchain:
- add 'QMAKE_CFLAGS_OPTIMIZE_FULL' variable, similar to 'gcc-base.conf'
toolchain, though left it unused for now,
- add missing flags to 'QMAKE_CFLAGS' variable, similar to
'msvc-desktop.conf' toolchain,
- update deprecated 'Qwd' flag with 'Qdiag-disable',
- use 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable instead of '-Od' flag,
similar to 'gcc-base.conf' toolchain (ICC implies '-O2' optimization
level by default, while MSVC implies '-Od'),
- add 'QMAKE_CFLAGS_UTF8_SOURCE' variable, similar to
'msvc-version.conf' toolchain; use a workaround to initialize it,
until '-utf-8' flag would be supported by ICC on Windows,
- update deprecated '-Qstd=c++1z' flag with '-Qstd=c++17',
MSVC toolchain:
- remove 'incremental' from MSVC 'CONFIG' variable, since it has
relevance only for the Unix generator,
- add 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable, used in ICC for Windows
toolchain,
- add empty 'QMAKE_LIBS' variable, similar to 'win32-g++' toolchain,
- add 'uuid.lib' library to 'QMAKE_LIBS_GUI' variable, similar to
'win32-g++' toolchain,
- add C++14 and C++17 language support flags, though left them disabled
for now, similar to 'win32-icc' toolchain.
Change-Id: Ideef62d0422674184836faa655bfc5d09a5f612f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
otherwise the project would need to clear QT despite using
qtHaveModule() in requires() (or REQUIRES=).
Task-number: QTBUG-65106
Change-Id: I568202214c8eafcdbe2d0e253b18f0e171293aff
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
