The autotest has been blacklisted for RHEL 7.1 and RHEL 7.2 earlier already
and it is still failing in 7.4.
Task-number: QTBUG-46116
Change-Id: I0f33be849513a2debaf8c093dcd413fa09b5c681
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
QWindowContainer assumed that a widget could never change from
native to non-native. This is not a fact when the window container
is reparented to toplevel and back. In this case, usesNativeWidgets
would be stuck at true, and parentWasChanged() would go down the
native widget path, triggering an assert.
The solution is to always recalculate the usesNativeWidgets bool.
Task-number: QTBUG-63168
Change-Id: I88178259878ace9eb5de2ee45ff5e69b170da71c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
When calling resize() from showEvent(), we'd set the full geometry
on the widget's QWindow. This resulted in the top-level window
being moved to the top-left corner, even though no other call to
move() or setGeometry() had happened before.
The solution consists on calling the proper QWindow methods depending
on whether setGeometry_sys() is called for a move, a resize or both.
Furthermore, this needs QWindow::resize() to set its position policy
to frame-exclusive. The documentation states that is already the case
and we're setting the full geometry on the platform window, so we need
to convey that bit of information.
This also solves the age-old conundrum: "### why do we have isMove as
a parameter?"
Change-Id: I2e00fd632929ade14b35ae5e6495ed1ab176d32f
Task-number: QTBUG-56277
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's failing for inexplicable reasons not only on 10.10 but also 10.11.
Task-number: QTQAINFRA-1317
Change-Id: Id316764443dfe9e0ae30e2d25d8bae73fa255617
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It was grabbing a QLabel without accounting for the size of
the window in the case where the DPI is larger than 1:
FAIL! : tst_QWidget::translucentWidget() Compared values are not the same
Actual (actual.size()) : QSize(32x32)
Expected (expected.size()): QSize(16x16)
Change-Id: I4873f3c6364ee2696f5612d91e6c97c60b2cd915
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CI metrics show that this test was flaky ~38 time in 3 days.
The problem is old: after we get a surface, a window manager can still
decide to re-position the window.
The fix is to simply send the touch event in a position where it is sure
to hit the window (usually the offset is the title bar height).
The blacklisting seems to not have worked, I could reproduce the failure
on a linux/xcb machine.
Change-Id: I5229fe020ba75c984fd3b6c322ad00d769707573
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
tst_QWidget::updateWhileMinimized has been failing on Ubuntu 14.04
and was already blacklisted there. Now we extend it to cover Ubuntu
16.04.
Task-number: QTBUG-46116
Change-Id: I6758657cca46bb4c76cddb0298f9b87b8a43655b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Fix the condition in QWidgetPrivate::resolveLocale() to decide whether
to propagate locale: make it match setLocale_helper()'s condition when
deciding whether to propagate to descendants. This lead to a
QDateTimeEdit's calendar popup not getting told what locale to use
correctly, unless we setLocale() on it overtly, which then blocked
propagation of locale changes to it unless QDateTimeEdit manually
propagated the changes.
Fix the documentation of WA_WindowPropagation to mention locale as
also being propagated (which it was in several places, only neglecting
this one in resolveLocale).
[ChangeLog][QWidget][Qt::WA_WindowPropagation] Propagate locale
consistently, along with font and palette, within the widget
hierarchy. Previously, locale was propagated on ancestral
setLocale(), but not on creation of the descendant.
Task-number: QTBUG-59106
Change-Id: I92270f7789c8eda66a458274a658c84c7b0df754
Reviewed-by: David Faure <david.faure@kdab.com>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If a floating QWidget has a parent on a different screen, its DPI was
still inherited from the parent instead of taken from the screen.
The only reason we did was in case there is a customDpi set.
(customDpi is a private thing that is only used in designer to change
the appearance of the previewed widget)
So instead of recursing into QWidget::metric for each ancestor, just
use a for loop to find if one parent has a customDpi. If no customDpi
is found, then return the DPI of the right screen.
Task-number: QTBUG-58959
Task-number: QTBUG-48242
Change-Id: Ie6e9e48cdd10234994c0919ba3aea9b0cdb52494
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The implementation now uses the relaxed-constexpr
qCountTrailingZeroBits() function from QtAlgorithms, making the
QSizePolicy(Policy, Policy, ControlType) constructor constexpr on
C++14 compilers. The explicit check for DefaultType remains to keep
the constructor C++11-constexpr when called with just (Policy,
Policy).
Extend the constExpr tests a bit.
Change-Id: I59690f0921d9bdee08e3615d0d1f4a9b92870c32
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Embeddeding a QWindow via QWidget::createWindowContainer() fails to
deliver the SurfaceAboutToBeDestroyed event. This breaks any OpenGL
or Vulkan based QWindow that releases resources upon this event, and
is particularly critical with Vulkan where the only way to do properly
ordered swapchain - surface cleanup is via this event.
In the non-embedded case close() eventually ends up in an explicit
destroy() in QWindow. In the embedded case destroy() only gets called
from ~QWindow. This then silently breaks since the subclass' reimplemented
event() virtual is not getting called anymore.
To remedy the problem, simply add an explicit destroy() to
QWindowContainer.
Task-number: QTBUG-55166
Change-Id: I1671e8f4d39f6c44e19eca7b9387f55fe3788294
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Ensure that tablet moves are delivered iff tabletTracking is true.
Task-number: QTBUG-26116
Change-Id: Iaa360e181f0c6484cfbde6fa5365f2f0dc77433a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Unfortunately, that ctor also takes a ControlType argument (defaulted),
and calls the non-constexpr, non-inline function setControlType().
In order to make at least the two-arg version constexpr, I added
a use of the ternary operator to check for type == DefaultType,
making all calls of the ctor that use type == DefaultType
constexpr. For init'ing an aggregate type without ctor in the
ctor-init-list, I needed to require uniform initialization, too.
C++11-style constexpr cannot call void functions, so I needed
to extract the transformation part of setControlType() into a
new function that returns the result instead of storing it directly.
Saves a surprising 2K in QtWidgets text size on GCC 4.9, AMD64 Linux
stripped release builds.
Change-Id: Ib4adf5fd6e54d5345dbfe1c298554278faf13c58
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
I didn't even try to understand what the old code was trying to do;
once you're told by a user that the code is wrong, you see that it is.
Fixed by just using the row as passed to takeRow() instead of trying
to do some storage-index calculations. The m_matrix indexing operator
does it all for us.
Added a test that checks that the expected field widget gets
returned. Fixed expected test data that was wrong, and just checking
that the implementation behaves as implemented, instead of as
documented.
Amends change 8fbae648db.
[ChangeLog][QtWidget][QFormLayout] The functions takeRow() and
removeRow(), new in 5.8.0, now take and remove the correct row.
Task-number: QTBUG-58693
Task-number: QTBUG-15990
Change-Id: I7185ccbc6c03e2579741cad5c0c821d3ed165474
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In some situations, this allows for nicer code. It's also possible to
make this constexpr in C++11, whereas the mutable transpose() would
require C++14-style constexpr.
The new function should also be faster, since it just swaps the member
variables.
Because of constexpr-function limitations, the way the return value is
constructed needs to depend on the level of the compiler's C++11 support.
This is not the only class that requires uniform init to provide a fully
constexpr interface (QUuid and QBasicAtomic come to mind), so this should
probably be generalized across Qt at some point.
Added tests.
[ChangeLog][QtWidgets][QSizePolicy] Added transposed() method.
Change-Id: Ic1077a0d5a861e7c63bd1daeeb42b97c3a2f71ef
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Also add a basic test for constexpr expressions involving QSizePolicy.
GCC < 4.8.0 has problems with initializing variant members in constexpr ctors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54922
Instead of revoking its Q_COMPILER_CONSTEXPR, which is a source-incompatible
change, simply note the fact so we can selectively provide constexpr for
QSizePolicy.
Change-Id: Iba8e5a7cdf847d73e8e2b6bb6211fb3c9846aa0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLayout::replaceWidget() doesn't delete the affected item, but returns it.
Change-Id: Ibda96e4bf2432ad13ed2908c7d37547f46e29a37
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Updating the focus child means the focus object of the window has changed.
We need to report this to QtGui immediately so that it can e.g. inform the
input context of the new focus object, before widgets reacting to the focus
events start calling update() on the input method.
Change-Id: Ie3f7b835591e71519e3f384c2abdad53242c9736
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This new function does the same as newRow(), except that it has a less confusing
name (in line with _add_Column()), and accepts printf-style arguments to avoid
the need to newRow(qPrintable(QString::asprintf())), a common pattern in client
code. It uses qvsnprintf() under the hoods, avoiding the need for the QString
const char* round-trip.
Port all in-tree users of newRow(qPrintable(QString::asnprintf())) to the new
function.
Change-Id: Icd5de9b7ea4f6759d98080ec30f5aecadb8bec39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Analogous to QWidget::setAttribute(), introduce an API to easily
enable/disable a single window flag without having to resort to
w.setFlags(w.flags() | Qt::NewFlag).
Change-Id: Ib0f7254a34c8d884cdec181c41b99e5ef035d954
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
The code coerced a -123 into a QFormLayout::ItemFlags, which, however,
being an enum with enumeration values 0..2, only has valid numerical
values 0..3.
Fix by using 3 as the value to represent the invalid enum value, and
store this in a constant so as not to distribute this magic number
all around the test class.
Change-Id: Ie5e93a69ef5a3acdde43030b022e0cce8aec484d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The new takeRow() functions return a pair of pointers to
QLayoutItems and, as the name particle 'take' suggests,
releases ownership of these layout items. Which in turn
means that the caller of the function is supposed to deal
with them.
This was not done here.
To fix, write a RAII class that takes ownership of the
returned layout items, deleting them when it goes out of
scope or gets a new value assigned (only move special
member functions are implemented, making the class move
-only).
Deleting the QLayoutItems is not so easy, though:
QFormLayout has a special function for clearing the
QLayoutItems out, so it appears that just calling their
destructors is not going to fly (though I don't know off
the top of the head why that should be a problem).
Solve this, for now, by adding the layout items back into
a temporary QFormLayout for destruction.
Change-Id: If862989207b20f1e3f757c19ec9d498c4491184f
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
