It was being mis-described in some places by a QT_CONFIG(timezone)
test, replacing older QT_BOOTSTRAPPED checks; but it has no time-zone
dependency (until 5.10). So make it a separate feature in its own
right.
It turns out QAbstractSpinBox's presumed dependency on datetimeedit
was an illusion caused by use of QDATETIMEEDIT_*_MIN symbols actually
provided by datetimeparser; so remove its bogus dependency.
Change-Id: Ibc12f4a9ee35acb64a39a1c7a15d2934b5710dc0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt_metacast is not const so there is no need to use const_cast.
This fixes a warning in generated code.
Task-number: QTBUG-63352
Change-Id: I0c37442ac268a654316bc0e7e04f77fb51cae019
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The leap second record sizes were not properly taken into account. The
comments in the code were right, but not the code itself. Fortunately,
on most Linux systems the leap seconds are not stored in the tzfiles, so
we never ran into a parsing issue.
Task-number: QTBUG-63205
Change-Id: I6e1fe42ae4b742a7b811fffd14e4a57f5d142f97
Reviewed-by: Maximilian Baumgartner
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We should only copy the minimum bytes-per-line when saving an image.
Task-number: QTBUG-30515
Change-Id: Idd34a389cf88210c3f127599ccf54d27d3ec9a06
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Due to the complex event forwarding logic between QCompleter,
QComboBox, QLineEdit and QWidgetLineControl, in some cases the
same single user return key press could result in duplicated
activated() signals being emitted by QComboBox. The first one
would be emitted because QLineEdit emitted editingFinished()
as a result of QCompleter::eventFilter() having forwarded the
return key press event to QComboBox. The second one, would
happen right after, as QCompleter::eventFilter() would process
the same event on behalf of its popup.
(We recall that QCompleter is installed as its own popup event
filter. That's also the case for the completer's widget, although
the purpose there is limited to focus-out events).
The current fix consists on skipping the emit as a result of
QLineEdit::editingFinished() if the completer's popup is still
active. For this to be accurate, it helps to test whether the
completer's popup is visible, so we will not be hiding it in
QWidgetLineControl::processKeyEvent() anymore. Indeed, we know
that if the popup is visible, that means that processKeyEvent()
was called after being forwarded by the completer's popup event
filter. Furthermore, the popup will be hidden by its event filter
shortly after it returns from said event forwarding call.
Based on a patch by Alexey Chernov <4ernov@gmail.com>.
Task-number: QTBUG-51858
Task-number: QTBUG-51889
Change-Id: I013f6c3000ae37b5b0ec20eaf5cf7746c9c903e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QCompleter::popup() is used to lazily create the popup itself.
However, we oftentimes call this function only to check if the
popup is visible.
Change-Id: I55531e1e6810c02a44f5f65124cf641b1a89de69
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We end up calling setUpLayout() quite a few times and, in
particular, every time we add a new tab. Even if the tab
widget is hidden, we set the layout item margins to ensure
that whatever layout will contain the tab widget can get
the proper sizing.
For all practical purposes, layout item margins don't depend
on the contents itself, but are rather a simple constant
returned by the style. This means that QStyleOptionTabWidgetFrame
::tabBarSize, among a few other properties, is not needed
right away. This property in particular is quite expensive
to compute because it requires measuring the text size of each
tab. This can lead to a quadratic behavior: the size of each
tab's text will be computed for each tab we add. Besides, text
size computing has become a relatively expensive function in
itself (see QTBUG-53151, for example).
The current solution just uses a partially initialized style
option object for the sole purpose of getting the tab widget's
layout item margins from the style. The performance improvements
detailed show the creation time for QTabWidget with the specified
amount of tabs (times in ms):
Tabs Before After
-------------------
1 6 5
5 6 6
10 8 6
50 57 17
100 178 21
200 673 33
Task-number: QTBUG-55126
Change-Id: I79505dbd0014f6ed185da28047d8b68f9462ba94
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
MariaDB allows only a single call to mysql_library_end(), all subsequent calls
to mysql_library_init() or any other API call will fail. Since QMYSQLDriver
calls mysql_library_end() function whenever the refcount drops to 0, this
breaks applications that close and reopen database connections.
This change registers call to mysql_library_init() via qAddPostRoutine()
when compiled against MariaDB, so that we only call it once.
Task-number: QTBUG-63108
Change-Id: I22c1f0c5b081216f12596a32748dca25cae919e9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It's included unconditionally from qxcbconnection.cpp and qxcbscreen.h.
Task-number: QTBUG-53537
Change-Id: I6e1fe42ae4b742a7b811fffd14e5d374155660f3
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
When QT_SCALE_FACTOR=1.5 or other decimal, QWidget
draw QGraphicsEffect in error size. Use QPaintDevice::devicePixelRatioF
instead QPaintDevice::devicePixelRatio() will fix it.
Change-Id: I423e224d73b948ecdeca0e6b24c51f12a724a0ba
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Commit 12c5264d9a fixed the calculation of
SHA-3 in QCryptographicHash: we were previously calculating Keccak.
Unfortunately, turns out that replacing the algorithm wasn't the best
idea: there are people who need to compare with the result obtained from
a previous version of Qt and stored somewhere. This commit restores the
enum values 7 through 10 to mean Keccak and moves SHA-3 to 12 through
15. The "Sha3_nnn" enums will switch between the two according to the
QT_SHA3_KECCAK_COMPAT macro.
[ChangeLog][Important Behavior Changes] This version of Qt restores
compatibility with pre-5.9.0 calculation of QCryptographicHash
algorithms that were labelled "Sha3_nnn": that is, applications compiled
with old versions of Qt will continue using the Keccak algorithm.
Applications recompiled with this version will use SHA-3, unless
QT_SHA3_KECCAK_COMPAT is #define'd prior to #include
<QCryptographicHash>.
[ChangeLog][Binary Compatibility Note] This version of Qt changes the
values assigned to enumerations QCryptographicHash::Sha3_nnn.
Applications compiled with this version and using those enumerations
will not work with Qt 5.9.0 and 5.9.1, unless QT_SHA3_KECCAK_COMPAT is
defined.
Task-number: QTBUG-62025
Discussed-at: http://lists.qt-project.org/pipermail/development/2017-September/030818.html
Change-Id: I6e1fe42ae4b742a7b811fffd14e418fc04f096c3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Nowadays, there is no need for this additional timer. It was intended to
forcibly disconnect the socket if an appropriate write notification has
not arrived. After several fixes in the notification system this does
not occur anymore, because otherwise we might have seen the hangs in the
regular data transmitting.
Also, it can break a delaying disconnect of the socket, if a write chunk
is large enough.
Task-number: QTBUG-63000
Change-Id: I9b9fd46af0209f9ce006a6d5ee5bfac9ea85482d
Reviewed-by: Anthony Groyer <anthony.groyer@airliquide.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The comment was back-to-front on the meaning it needed to address; and
the #if-ery used a deprecated define, now changed to match what
sanity-bot asked for.
Change-Id: I0a971ab2e405e5908066da86964d67c8b852f114
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63262
Change-Id: I216985e81d1c1cb3528fd8a005be48cad2a31ab7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When focus is put back onto an itemview and the current item is editable
then the WA_InputMethodEnabled attribute should be set. Likewise this
should be set/unset when the current index changes too, depending on
whether the index is editable or not.
Change-Id: Iaea075e669efd21bdaa89a49c500c449272d098b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Log only relevant input events which are ignored. This reduces the
output when COIN re-runs failing item view tests with full debug
output enabled.
Change-Id: Ifce9a56fdf313b7572baff9de8fb298b38e8b33a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We haven't hooked on any of the properties to tell ibus IMs the type of
field or that it should be hidden, so hide it like is standard.
Change-Id: Iaa64c669f7162b60c16971ec962101b974108e65
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Peter Varga <pvarga@inf.u-szeged.hu>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Change-Id: Iffb81a37a517e58d48757d82f93f20e8c5100033
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This file uses functions declared in this header, and it is not pulled
in transitively on all platforms.
Change-Id: I6654118883a8dc22dacf1beb7b9b1c662719d25c
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pointers belonging to different arrays must be compared using
std::less.
Change-Id: Ib77af7b1b2da58d7243fa77273a8a45ee9035a1a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One example is VxWorks.
Change-Id: I253df715a9417c1f9cede79b1e1860924e0da8a9
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We obviously should check the variable we're about to get the data from.
Amends 1216f596bd.
Change-Id: Ibe87138b9c9aa99837b4fbf3769cd26ca1aaacb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If MOC_INCLUDEPATH exceeds a certain limit, its content is written into
a file named mocinclude.opt, which is then passed to moc as a response
file. That moc parameter was not properly quoted, and the moc call
failed for paths containing spaces.
Task-number: QTBUG-63197
Change-Id: Ib0542d80ce1bab239e0e6b6e24fadd11007b1846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Changed signals and slots to new syntax, used nullptr and replaced
foreach with new C++11 range based for loops.
Also fixed a few minor flaws.
Task-number: QTBUG-60633
Change-Id: Ice4030133971912f96752d9d84c638c70fd73e35
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Don't always copy the variants that we want to compare. This can
in some cases be a relatively expensive operation.
Change-Id: I2b3fd246ac136b19d8a8d281fbdcfb0417c8fb6c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Looks like whoever created the blacklist never tried to figure out why
it happened.
Change-Id: I84e45059a888497fb55ffffd14d2fb29e32a4521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the source file is read-only then it would copy the file with that
attribute set when it is installed. However this will cause a problem
if it is installed a second time. Therefore the read-only attribute
needs to be manually reset before installing and again before touching
the file. Once the process is done then it is set back to be read-only
to preserve the state of the original.
Change-Id: I1c01f418ef3c9bd434acd2c2b8ee695544d7bb35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add an early check if both types are the same.
Change-Id: If6fc60a58fce641521c083bf920e72bf3d2d4c28
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When calculating item sizes (used for menu size)
the styles consider the widget screen. This widget
screen could be a wrong default or an obsolete value.
This patch ensures the screen is correct set on popup.
[ChangeLog][QtWidgets][QMenu] Fixed menu size issue when
using high DPI on multi-screen system.
Task-number: QTBUG-59794
Change-Id: I84461441d5d33cb8dc04ab1acb9630fbfc8c5514
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Morten Kristensen <msk@nullpointer.dk>
Reviewed-by: Per Liboriussen <liborius@chelys.dk>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This option is listed when displaying the help of Quick tests,
but was never actively supported as it had been removed before
Qt5.0 was finally released.
Change-Id: I4cdf8d86471ab72e289f27a07a5f04c0338bfdbd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
