Before reading the configuration of a docker machine, the machine shall
be created and started. Otherwise, the docker command will complain
about "cannot connect to the Docker daemon".
If the docker machine has not been created, the make check will be
immediately terminated, and then print the error message. If its status
is not running, the machine will be turned on by a start command.
Change-Id: I7f4c322e7bdf29e4e4203e0e1bbc2e5c8cf677be
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The state was forgotten from the translation layer, this is important for tree views.
Fixes: QTBUG-71223
Change-Id: Ief4004fe455889f9d5a7eb018bf34d37c36a6bd9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There is no docker bridge on macOS. Docker document recommends using
port mapping to connect to a container; but it causes a port conflict
if the user is running a service that binds the same port on the host.
An alternative solution is to deploy the docker environment into
VirtualBox and use the host network option.
Task-number: QTQAINFRA-2293
Change-Id: I05dc65c5f8b4be7a1b1874a4ec7c034cc68679ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The hue parameter in hsl/hsv was treated the same way as a the other
parameters although it's range is from 0-359 and not from 0-255.
Fix it by extending the maximum range for the first parameter when
parsing a color value given in hsv or hsl.
[ChangeLog][QtGui][CSS] Fix the range of the hue parameter when parsing
a color given in hsl or hsv
Fixes: QTBUG-70897
Change-Id: I9ffa65a89c0abcca62bae35777ca1cbde3375180
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Only QGuiApplication would emit the signal. Untangling the duplicate
code is rather non-trivial, so left alone for now.
Fixes: QTBUG-71186
Change-Id: I4021e3b9ff39718562f4fa3a03c092436b559e9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some of the enums were cast to int on comparison. That just makes it
harder to know what the values were.
And verifyClientCertificate had 4 cases which were named the same as 4
others.
Change-Id: I09e8e346a6f416236a92073cf9a8f349938d37ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before commit 4d15f393a7 update requests
were handled by a timer on QWindow. Therefore they survived the closing
and re-opening of platform windows. Now, as the timer was moved to
QPlatformWindow, it gets reset when you close the QWindow, and any
pending update requests are lost. However, we do set the
updateRequestPending variable on QWindow when requesting an update.
Therefore, we can also restore the update timer on the platform window
when creating it.
Change-Id: I23b00f24a46706beac7d1455edd8a5623db46b22
Fixes: QTBUG-70957
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wrong option was used to set zlib compression level for png
setCompression with negative value uses default compression
setCompression with value between 0-100 converts to zlib compression level 0-9
setCompression with positive value overrides Quality option
Change-Id: Ic4b048a1e30d6940019c2a00a6c24d0c11e3f821
Reviewed-by: Alexandra Cherdantseva <neluhus.vagus@gmail.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When there were additional spaces between the function definition and
the first parameter, the parser failed to parse it when it contained
another function (e.g. 'qlineargradient(... rgb() ...)').
The reason for this was that ::until() needs the function at index-1 so
it can correctly count the opening parenthesis.
Fixes: QTBUG-61795
Change-Id: I992f556e7f8cd45550f83bc90aa8de2b4e905574
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The flakiness was reported for macOS 10.8 a long time ago and I
am not able to reproduce it, so lets remove the workaround for
it.
Task-number: QTBUG-32690
Change-Id: I92e64065c7480b8f4c5d1d1e6cb5fdd218a70313
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QPlainTextEdit.
[ChangeLog][QtWidgets][QPlainTextEdit] Added QRegularExpression find()
method overload.
Change-Id: Id156971d3fa0372712bfa8b72a55550942a767e0
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QTextEdit.
[ChangeLog][QtWidgets][QTextEdit] Added QRegularExpression find() method
overload.
Change-Id: Ic7be224dcc59fc8d832daddd1999a713b7f04253
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
52f1692b84 introduced a possible fix for
this flaky test. Therefore unblacklist them to see if the change really
fixed the issue.
Task-number: QTBUG-64639
Change-Id: I759d66aac7641505487e88254d16750e87c97350
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTable/QTreeView did not follow the documentation and returned
their needed size with scrollbars within viewportSizeHint().
Then sizeHint() also took the size of the scrollbars into account
when the policy was set to ScrollBarAlwaysOn.
This lead to different results when the widget was shown/hidden and/or
the scrollbar was visible or not.
Fix it by only adding the additional size when the scrollbars are
really visible. Also use header->isHidden() instead of isVisible() in
QTreeView the same way it is done in QTableView.
[ChangeLog][QtWidgets][QAbstractScrollArea] QTableView/QTreeView are
now reporting their viewportSizeHint() correctly taking into account
its scroll bars visibility and visibilityPolicy.
Task-number: QTBUG-69120
Change-Id: If50959a9f7429275e3e33122644c978fb64972ba
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This patch enabled json1 support for sqlite3 by defining
SQLITE_ENABLE_JSON1
[ChangeLog][QtSql][SQLite] Enable the json1-extension for
the SQLite3 plugin
Task-number: QTBUG-63498
Change-Id: Iaf1069ff1396c573125a5a3f490c0df5df560468
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The matatype should not keep manually maintained list of stream
operators. The patch adds automatic detection for all builtin types
so load and save functions pick the right delegate automatically.
This change exposed some existing anomalies:
- char is enforced to be signed while it seems that just calling
the operator directly does not have that feature.
- [unsigned] long type is always upgraded to [unsigned] long long
- QCborSimpleType doesn't have the data stream operators while
metatype is able to stream it through casting
Change-Id: I51178d6acd97d0585a6089e30ddd6acb2a29af54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ife72db5a0d7cb8abe55c60c519087e2b60f26990
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>