Add painting of sets of lines, both connected and unconnected, that go
outside the device area.
This prepares for fixes & improvements in the painting code.
Pick-to: 6.2 6.1 5.15
Change-Id: I9cffc760524e9ade42362c9a04949270ac24180f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QFont should be constructed with a list of font families.
Pick-to: 6.2
Change-Id: I61141b25d3f6e25f4fea141acbfa8e164d7af58f
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This does not fix all data races that we have in the system yet.
One major issue is the virtual disconnectNotify(), that can be
called from any thread and thus is inherently problematic, as it
can collide with the object getting destroyed at the same time
in another thread.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-88248
Change-Id: I9d841eb363b7e4f0de1657aeb8f5340d0fd55190
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful for some HDR representations and HDR rendering.
Change-Id: If6e8a661faa3d2afdf17b6ed4d8ff5c5b2aeb30e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While at it, move tst_android under corelib/platform/android.
Change-Id: Icf91cd75cb5e04d03fe6a81d52fba52a485ca41f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Extended QObjectPrivate::ExtraData to store a pointer
to its parent, and reimplemented qGetBindingStorage()
function for QObjectPrivate::ExtraData.
This allows to use Q_OBJECT_COMPAT_PROPERTY macro
for a property, stored in QObjectPrivate::ExtraData
and solves all the problems with calling a custom
setter.
Task-number: QTBUG-85520
Change-Id: I40e01c29430846359ef9160fa1ae97c702be9a18
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
pro2cmake did not take into account the
QT -= qt
bit of the .pro files.
Fixes: QTBUG-91676
Change-Id: If1373ee966312e4246490bd7389d75be9fa739cb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When stroking a dashed path, an unnecessary amount of processing would
be spent if there is a huge number of dashes visible, e.g. because of
scaling. Since the dashes are too small to be indivdually visible
anyway, just replace with a semi-transparent solid line for such
cases.
Pick-to: 6.1 6.0 5.15
Change-Id: I9e9f7861257ad5bce46a0cf113d1a9d7824911e6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
These are also failing in RHEL 8.2
Task-number: QTBUG-52523
Change-Id: I1448124376a2b415351d1a755043431050808e38
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The test is blacklisted in dev and 6.1, let it fail properly. We can
watch the history of the test and remove the blacklisting if/when it
passes consistently on supported macOS versions.
Pick-to: 6.1
Task-number: QTBUG-20984
Change-Id: I3211ecf565995578c83a092c637890c0e8bfd766
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
These two tests (applicationTest() and mainWindowTest())
require QApplication::setActiveWindow() to work, which it
does not on Wayland.
Task-number: QTBUG-91418
Change-Id: I0e7b4e24050684b437de63d19bd885bab53d36b9
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
gcc 9 consumed enourmous amounts of memory building the test, regularly
dying on a VM with 4GB RAM. Splitting it up helps.
As a drive-by, use inline static variables, and rename the header used by
other tests to tst_qmetatype_common.h.
Change-Id: Ib716d8e3506aac6c87845e57b04cb1a4f6c68387
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It fails on 10.15 and 11, preventing those from being significant,
and the test is already marked as expect-fail based on QTBUG-20984.
Task-number: QTBUG-20984
Change-Id: I6911166a1c3e9173d6d36f2a3a68b37778fd3406
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Previously it only returned checked or unchecked for a tri-state
checkbox.
Fixes: QTBUG-84616
Pick-to: 5.15 6.0 6.1
Change-Id: Ife72098e35f8295fd389bda232de5478ffa7e87f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
RGB10 internal texture format is not supported on GLES, use RGB10_A2
instead.
Pick-to: 6.0
Change-Id: Ib43eb99b170f441e886be50d29a6a5f7696c05c7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The alignment has been recently updated but never correctly tested,
as test has either been disabled or marked as insignificant.
Change-Id: If6e529c290b2057f58c3b27c89279d9e90728ad4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
And inline the fast checks inside the methods in QBindingStorage.
This allows QObjectBindableProperty and friends to inline all the
fast checks and almost completely eliminates the overhead for property
accesses when no bindings are being used.
Read and write times of QObject based properties when no bindings
are being used:
Read Write
Old style property: 3.8ns 7.3ns
QObjectBindableProperty (no notification): 4.5ns 4.3ns
QObjectBindableProperty (with signal): 4.5ns 7.6ns
QObjectBindableProperty (inline accessors): 3.2ns 3.4ns
Numbers without this patch:
Old style property: 3.8ns 7.9ns
QObjectBindableProperty (no notification): 7.2ns 7.7ns
QObjectBindableProperty (with signal): 7.2ns 16.0ns
QObjectBindableProperty (inline accessors): 6.3ns 6.7ns
Change-Id: Ifd1fa3a489c3be8b1468c0b88af547aac397f412
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
(cherry picked from commit 98c82fb445acf45cc4c4bc86a5adda43358127bf)
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Our tls certificate/key are a bit on the old side and need to be
updated. But for now let's lower the openssl level. In this case openssl
complains about the server's key used for DHE being too short.
Task-number: QTBUG-86187
Change-Id: I142a7d52f7599f60b8f4f3ff3ac5ce61fed06b4c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
These were now always defined, hence redundant.
Leave the #define in place so that we can verify we actually do always
define it, in a #else of an existing #if check on it.
Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qmake parser of pro2cmake handles completely commented lines to make
assignments like this work:
SUBDIRS = \
foo \
# bar \
bar
However, assignments like
SUBDIRS = \
foo \
#bar \
bar
were cut off at the commented line.
Fix this by allowing leading whitespace for "fully commented lines".
Change-Id: Ib5de850a02fd9b9ebb7c056c2f64f9d684334b08
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QBindingStorage is a class that can store a set of binding objects
for the properties of a QObject. This will get used to reduce the
memory overhead of the property system when adding bindable properties
to QObject based classes.
The binding storage has a pointer to the TLS entry containing the
currently evaluating binding. Like that we avoid repeated TLS
lookups and reduce the overhead of the property system to one
pointer lookup and one compare for the case that properties
aren't being used.
Each QObject now owns one binding storage object, that can be used to
store binding data for properties that members of the QObject.
Change-Id: I27427c03c2ba281f072e074be96147bdbcaac246
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When a signal/slot connection is activated, a lock on the receiver
object is taken (to be sure it doesn't get destroyed).
The path for blocking queued connections however took the lock on
the sender by accident, fix that.
Pick-to: 5.15 5.12
Change-Id: I8cd938a50eca2bf71e7bfb86768ee0c8431afdfa
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
warning: all paths through this function will call itself [-Winfinite-recursion]
Change-Id: I70008710a7448ffd532bb6c3acb488fe439cb807
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test explicitly asks for a non-native file dialog, which works on
macOS as well.
Change-Id: I964c6d98501b4207c2b6c2ce1df39f654c801a43
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
