The test is compiled since QT_UNICODE_LITERAL is always defined
on Windows and ref.isStatic()) then fails since C++ 11 is not
enabled.
Task-number: QTBUG-29014
Change-Id: I357574a493c5191f1463e7ee5851d7db0e569315
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike the previous implementation, this implementation is locked:
only one initialisation is ever run at the same time. It is
exception-safe, meaning that a throwing constructor will restart the
process.
Also, start using the thread-safe behaviour that GCC has offered for a
long time and C++11 requires.
Change-Id: I20db44f57d258923df64c0051358fd0d9a5ccd51
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Introduce variables for the paths used in the test and
check in initTestCase().
Change-Id: Ie801266e30cd860e5bdf079c1182fe385f9598c7
Reviewed-by: David Faure (KDE) <faure@kde.org>
Qt 4.8 shows frequent crashes in runMultiple apparently caused
by the QMutex construction in the free functions by different
threads. Use a common QMutex class member instead.
Change-Id: I851d4e2d3637a7b4f404ed843f5360c10caa21f5
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is intended to make it easier to understand what's happening when
this test is flaky during CI.
Change-Id: I13163c244cb99414d90b5f71c365a4ff2216bc83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So that the QTemporaryDir can happen even on error.
Change-Id: I728d49eac8bd65e1919fd314a95387949e134de0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This QIODevice uses a temporary file for writing, so that in case of
write errors, the writing operation is canceled, without losing any
existing file. It also avoids having a partially-written file visible
by other processes, at the final destination.
Change-Id: I9482df45751cb890b1b6f1382ec2eea3eb980627
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by trying more often to get dates close enough to each other.
Change-Id: I370f7cd61bbb84fbb77ea96ff9fd82c1a6f1f76a
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This currently fails on case-insensitive file
systems since the check for existence then triggered
and indicated "file already exists".
Check on the file id (inode or file id) whether
the target file is really a different file for a
case-changing rename.
Task-number: QTBUG-3570
Change-Id: I1b2d40850692e02142ee23d2c753428de00aedc6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is necessary for initializing things in a library, which require
a QCoreApplication instance (unlike Q_CONSTRUCTOR_FUNCTION, which runs
before that). Example use cases: KCrash (segv handler), and KCheckAccelerators
(debugging tool triggered by magic key combination).
Change-Id: I5f4c4699dd4d21aea72b007989ba57467e86ed10
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drop the read and write permissions for group and other users in the
system.
Change-Id: I8fc753f09126651af3fb82df3049050f0b14e876
Reviewed-by: Richard J. Moore <rich@kde.org>
This is a very common thing to do, e.g. in order to send urls via DBus.
Change-Id: I277902460ee1ad6780446e862e86b3c2eb8c5315
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to move QTextStreamPrivate to a private header, to be able to use
its new internal Params struct from qdebug.cpp
Change-Id: If28e25f27bbd04b1825a5eb3e2ef83ecad72e7b2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMessageAuthenticationCode is HMAC implementation based on
QCryptographicHash abilities. HMAC is often used in OAuth and similar
authentication protocols.
Change-Id: Ifc73947ad06c36a1b770315b7e89ba5c01c5e79e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test runs fine almost all of the time on systems with 1
processor, which were the norm when the test was written and are still
the way that the Qt Continuous Integration system works as of
today. But it falls flatly on multi-processor systems.
The root of the problem is that QSystemSemaphore recreates the
semaphore if it disappears underneath it. However, the recreation
process is not thread-safe at all: if two threads race to recreate it,
weird things might happen. strace on Linux shows that a thread got
stuck trying to acquire the semaphore:
<... nanosleep resumed> NULL) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
semget(0x51001388, 1, IPC_CREAT|IPC_EXCL|0600) = -1 EEXIST (File exists)
semget(0x51001388, 1, IPC_CREAT|0600) = 114786308
semop(114786308, {{0, -1, SEM_UNDO}}, 1 <unfinished ...>
This problem does not happen if the creation and destruction of the
QSharedMemory (which uses QSystemSemaphore) does not race with other
threads or processes attaching and detaching. For the threads test
it's easy. For the processes, we use stdin and stdout as a
communication channel.
Change-Id: Ie11b135431d4abfc59234654848b67f622eb03c9
Reviewed-by: Richard J. Moore <rich@kde.org>
This convenience overload allows one to write
QRegularExpression re1, re2, ...;
QRegularExpressionMatch match;
QString subject;
if (subject.contains(re1, &match)) {
// ...
} else if (subject.contains(re2, &match)) {
// ...
} // ..
One can then inspect the results of a successful match in each block
(as well as extracting the captured substrings, etc.).
Change-Id: I0fb8be8b577656e8db994198f8105c26c4fe67b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to put them in containers, and to enable subsequent
features for QString.
Change-Id: I3b3fe695ffe6930331ed9f670738376722e0fc36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This match type doesn't do any match at all; it's only necessary to
properly introduce default constructors for QRegularExpressionMatch
and QRegularExpressionMatchIterator (since they return the match type
that created them).
Change-Id: Ibfe92459c7fdd23129cf3afe073cd443c461ddeb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Provide addition/subtraction for QMargins as well as
multiplication and division for int/qreal similar
to QPoint. Add unary minus.
Change-Id: If4eb831cfd610b34b5ca361619b1636031811d0a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
- Addition of a QMargin to a QRect.
- Removal of a QMargin from a QRect.
- Remove implementation from Windows platform plugin.
Change-Id: Iae54bc13e94a7ece48853b1d3f3de2bfc154d2dd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Check that the regular expression, the match type and the match options
returned by QRegularExpression/QRegularExpressionIterator are the
same ones passed to match / globalMatch.
Change-Id: Ibd282379bb60b53d614b1d56a7e08b3d6c236da6
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Add additional tests for the updates in the Qt4.8 qlocale data (CLDRv2.0) already existing in Qt5 locale data (CLDRv22.1):
- The NumberingSystem for some Indic and Slovak locales.
- The Month/Day name in Irish/Gaelic locale.
- The AM/PM Text in Turkish locale.
Change-Id: Iaea4f13ec79f94ab937b97f8ae60eb8d8f217c4b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I54523eb854619917123d8816d3cd6c3a1f5b4c55
Reviewed-by: David Faure <david.faure@kdab.com>
If the dynamic_cast failed in QSharedPointer::dynamicCast or
qSharedPointerDynamicCast, we should avoid creating the QSharedPointer
that shares the weak and strong reference counts. In Qt 5, this does
not imply a leak since the original pointer is stored internally for
deletion. In Qt 4 it implies a leak under certain circumstances, which
this change fixes.
Task-number: QTBUG-28924
Change-Id: Id2de140de4cf676461e14b201ad250c53666b79d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Going through QLocale and QString is not really needed.
This also makes the result of the conversion of negative numbers
in bases other than 10 independent of the architecture and
implements the documented behavior of treating them as
unsigned types.
Change-Id: Ibc231dc5241deb5cbadd9796484a8b5f79c29410
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The Linux futex implementation had a Q_ASSERT for positive values, but
the documentation says that negative values should be interpreted as
infinite (equal to lock()).
Test that too.
Change-Id: I2f96a502d672732781e88e49797756ca9a809121
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Requires C++11 rvalue references and variadic templates so we can
implement perfect forwarding.
Change-Id: I62e47d1ffd0c61e8386f9f246aa79031b7430b46
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
