As the defines looked like -DQT_TESTCASE_BUILDDIR=""C:\..."" compilation
from Visual Studio (vcxproj) failed due to the two quotation marks at
the beginning/end of the actual path. So for the vc(x)proj we do not use
shell_quote but add the quotes manually.
Change-Id: I186258d82a56928cd0316bff1ec9f60147044165
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This may introduce a privacy issue, however, there does not seem to be a
way to disable this behavior on iOS - there would probably be a setting
if they considered that an issue - so we might as well do the same.
Change-Id: I7a5a6552c36d69b98064b50875562f586b10c0ee
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
When the hostname is empty then it is assumed that the lock file is from
the same host as the one running the application.
Change-Id: Iba8aefc171a209294371dc2022d93ede3035b242
Reviewed-by: Will Wagner <willw@carallon.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Currently curveThreshold is relative to pen width, this allows wide
pen to be increasingly off target.
This patch adjust the curveThreshold relative to stroke width, thereby
ensuring wide pens stays on the curve.
Task-number: QTBUG-46151
Change-Id: Ifd4371aa2853331d02e3c6f6565c243eb1b7ed2e
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Otherwise, make check does nothing, always succeeding.
Change-Id: I0fe04697e02ab0f33cd9aebb550777e200c70804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Make it possible to stream the enumerations to a debug stream.#
Change-Id: I0add2dcd835333a8d6cebf779252f22c1418faf3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The test deletes a widget in QEvent::TouchBegin.
This is part of a series of patches to revive the test; it is currently
not run since tests/auto/gui/kernel/qtouchevent/qtouchevent.pro
is missing CONFIG += testcase.
Task-number: QTBUG-46266
Change-Id: I65c0a431ff1807133438764dd8b3c16bb9cb6743
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
We should not configure the decoder when just determining the image-
format. Doing so can cause all versions of libpng to print a warning,
and some versions to fail to decode.
The code appears to be a leftover from when the image-format logic was
copied out of the introduction of the decoding method, where the proper
settings are still applied.
Task-number: QTBUG-46233
Change-Id: I6619728804f040ae6c9d637c7298a8586e22499e
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
For example the Galaxy Note series of devices. This makes possible
drawing applications which handle stylus events differently from touch
or mouse. As on any other platform, if the application does not accept
the QTabletEvent, a QMouseEvent will be synthesized.
Also fix the tablet manual test to show larger circles on hidpi devices.
[ChangeLog][Android] stylus devices such as the S Pen generate
QTabletEvents
Task-number: QTBUG-38379
Change-Id: Ib594f453b8403cc06aa4e440a76f07afa3bac38c
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
QMenuPrivate::init() calls QPlatformTheme::createPlatformMenu() to
create a platform menu, but on Linux, that returns null for now.
QSystemTrayIcon::setContextMenu() results in recursive calls to
QSystemTrayIconPrivate::addPlatformMenu() which then calls
QDBusTrayIcon::createMenu() for the context menu and each submenu.
However if a submenu is added afterwards, a corresponding platform
menu is not immediately created. Now copyActionToPlatformItem()
will detect and create the missing platform submenu, by calling
a new method: DBusPlatformMenu::createSubMenu(). This is because
there is no way of knowing that it's a tray-specific context menu
(which is so far the only case in which we use DBusPlatformMenu).
So, QPlatformMenu::createSubMenu() needs to exist as a new
QPA interface for this use case.
Task-number: QTBUG-45803
Change-Id: Ib319e873082196515ea0580d70d069099cf2c175
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
From 5.5.0 -> WinRT port is licensed with LGPLv3, see
http://blog.qt.io/blog/2015/04/29/windows-10-support-in-qt/
Change-Id: I7e42564276af3fdbd0d4c61e2736610fa698b11c
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Use the helpers in qdebug_p.h to suppress class and enum names.
Change-Id: Ib71f0a1e5b3c22f44d68a7930fef38384f037204
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
it obviously makes no sense to set up the loop if the container is empty.
as we now have that conditional anyway ...
Change-Id: I6d95c0102734852443c188012bfcb076d879581e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_FRAMEWORK_VERSION has a fallback to VER_MAJ (which derives from
VERSION), so it's pretty much always set, thus defeating the previous
check.
amends 6cb495de.
Task-number: QTBUG-46215
Change-Id: I2c5560c469617ebeab978e4de78df00baf38d49d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the functionality is now covered by the qmakelib test.
Change-Id: Id627f573fb247ff3b86558509e27b6a9862c1a59
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the idea was to speed up optimized msvc compilation, but it didn't help.
still, it's better structured that way.
Change-Id: I4b2108d02a47ef8ef704b0b542b0f281bff20165
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this makes it possible to use these functions without an evaluator.
Change-Id: I23e4ec141b427f4c3c8b647305532be179058c07
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the messages contain a trailing CRLF, which is not helpful.
Change-Id: I4a27115a191dc416a62e28a41f2a9c5893bdc64b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the i/o functions are not very consistent about having the dot already
in the message. the windows api does, and qt passes this on.
Change-Id: I2d1a213965e15478985d6eff205689ea44aa2a03
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
a single quote must not disrupt a double quoted string and vice-versa.
Change-Id: Ibb277bc1c930a7dbe9199ca572507ababbcfae4c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
also adds documentation, which is kind of a sanity test. ehm.
Change-Id: I6b520e8b505a2bfbb1e376fa72be0f140227a3a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
freeData() takes a Data*, not a QContiguousCacheData*.
Task-number: QTBUG-45783
Change-Id: I96d7ac38dac24b418138ffff13d7fdf09b1d6b07
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Return null string instead of empty string when the selection is
empty. It looks like Samsung just tests for selection == null when
doing backspace.
Task-number: QTBUG-45785
Change-Id: Iaa006a8ffe52b2704c7348646dde9ca4e1f78c5c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The customcompleter and textcodes are widget examples, but they end up
in the Qt Core exampledirs boundary because of a reference to the
plugandpaint example in the docs. This resulted in a couple of wrong
entries being written into the examples-manifest.xml, which is used
by Qt Creator.
This change explicitly exludes the qdoc pages for the two examples
so that qdoc doesn't add the corresponding entries into
examples-manifest.xml.
Task-number: QTBUG-41996
Change-Id: I0e95b6d4d93e0ce18f5b34e5034b279598b4924f
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Return null string instead of empty string when the selection is
empty. It looks like Samsung just tests for selection == null when
doing backspace.
Task-number: QTBUG-45785
Change-Id: Id26ce707130777fcd0ab1a4cff08367bb2810f2f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
On desktop windows we define _HAS_EXCEPTIONS=0 to also forward this
option. Hence harmonize this with WinRT builds as well.
As a side-effect qtdeclarative now compiles without warnings on WinRT.
Change-Id: I8e343f172160991ffb2ede01303802f321de82b5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
QDoc generates tags for examples based on the example title and the
name of the module. This change makes the following improvements:
- Edit regular expression to match strings like 'OpenGL' and
'Qt3D' as a single tag.
- Strip off enclosing parentheses.
- Filter out common words ('and', 'the')
- When cleaning/modifying generated tags, keep them in a QSet
to eliminate duplicates.
Change-Id: I288104df12bf23a224068d40bce1f980148a412a
Reviewed-by: Martin Smith <martin.smith@digia.com>
Draw touch points as dots and mouse points as circles
to be able to verify High DPI scaling.
Change-Id: I2293adbcc726391f0d9e156935d609b957432029
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
If the internal queue contained multiple events, but the first one did
not select any transitions, the external event queue would be checked
before the remaining events in the internal queue.
Change-Id: I1a7f49afdefaaf2b4330bf13b079b61344385ea0
Task-number: QTBUG-46059
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Prevent application to crash with segfault in Qt bearer thread.
Corrected hardly reproduceable bug, when
QNetworkConfigurationManagerPrivate in pollEngines slot dereferenced
null and bad pointers and caused crash
Task-number: QTBUG-44407
Change-Id: I2f0b11b2d10125a21a62588d76ad824f375e4a1d
Reviewed-by: Richard J. Moore <rich@kde.org>
Standalone files are added by using RESOURCES += file.txt, while
collections of files are defined as collection.files = f1.txt f2.txt
and then added using RESOURCES += collection. For collections a prefix
can also be set using collection.prefix = /foo. The standalone files
are not prefixed.
Change-Id: I8236808238414da05e744f799a1bb15a72f4a46f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Change-Id: I41725bcfeee0124b259e96f1e3a261e30f14350a
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
