This static method can be called before QGuiApplication is created. At
that point there is yet no primary screen, so the implementation
needs to guard against dereferencing a nullptr.
Task-number: QTBUG-67309
Change-Id: I6b7b9e97b1c3c79bf2f9c6d6247c3b10f39f7a55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
To read data from a named pipe, QWindowsPipeReader uses the ReadFileEx()
function which runs asynchronously. When reading is completed and the
thread is in an alertable wait state, the notified() callback is called
by the system, reporting a completion status of that operation. Then the
callback queues a readyRead signal and starts a new sequence. The latter
is skipped if the pipe is broken or the read buffer is full.
Thus, if an application does not run the event loop, the next call to
QWindowsPipeReader::waitForReadyRead() should emit the queued signal
and report true to the caller even if no new read operation was started.
Change-Id: I37102dbb1c00191d93365bfc2e94e743d9f3962a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
1. If a request was redirected or some error was encountered, we
try to reset the uploading byte-device.
2. Disconnecting from the byte-device is not enough, since we have a
queued connection, _q_uploadDataReadyRead() gets called even if
byte-device was deleted and thus sender() can return null -
we have to check this condition.
3. Update auto-test with a case where our server immediately
replies with a redirect status code.
Task-number: QTBUG-67469
Task-number: QTBUG-66913
Change-Id: I9b364cf3dee1717940ddbe50cba37c3398cc9c95
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This failed (occasionally) in finding the editor widget, so wait for the window
to be shown properly. Also enter the event loop with QTRY_VERIFY and not for a
fixed time of 1 s.
This however just moved the point of failure. Now the test fails since the
clearing and setting of focus does not dismiss the editor widget sometimes, so
still blacklist it.
Task-number: QTBUG-67282
Task-number: QTBUG-66216
Change-Id: Iec598609fce23a25d7b955082d0973685d612715
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Fix a mistaken #ifdef that should have been #if; and only call
QTimeZone::availableTimeZoneIds() once in transitionEachZone_data(),
while switching to use of a ranged-for.
Change-Id: Id27aae9ef450f21350283099c892ca7173884b94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_COMPARE instead of a wait followed by QCOMPARE. Unless the condition
doesn't change and the wait provides the opportunity for things to go wrong.
Task-number: QTBUG-63992
Change-Id: I13474a45f1f4df9d77a418729a5748235ae0dd1a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
For the time being, no more stretched QComboBox. They
were already looking bad before and nobody complained,
so it's a non-issue. In the future, we might use square
combo boxes in the same way as we do for push buttons
but for non-editable QComboBox only.
Removes what is now dead code, including some leftovers.
tst_QMacStyle updated to reflect size changes to accom-
modate the focus ring.
Change-Id: I60fac86b9acb52cc96373bca0b3cad598ec4f1e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QTextDocumentWriter only supports a small subset of table formatting
when exporting to ODF-format. This patch adds more formatting
capabilities to the ODF exporter:
- table border support
- table alignment
- table width
- respect column constraints (column widths)
- add a tab before soft line breaks. This will avoid causing the last
line to stretch all over the cell in justified paragraphs.
With this patch, line height settings are now exported, too.
[ChangeLog][QtGui][QDocumentWriter] QDocumentWriter now supports table
borders, table alignment, table width, column widths, line height and
image resolution when exporting QTextDocuments to ODF files.
Task-number: QTBUG-63581
Change-Id: I2d269ef0f842e73af64d48bfef531d5fa3078088
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When we load DER-encoded keys in the openssl-backend we always turn it
into PEM-encoded keys (essentially we prepend and append a header and
footer and use 'toBase64' on the DER data).
The problem comes from the header and footer which is simply chosen
based on which key algorithm was chosen by the user. Which would be
wrong when the key is a PKCS#8 key. This caused OpenSSL to fail when
trying to read it. Surprisingly it still loads correctly for unencrypted
keys with the wrong header, but not for encrypted keys.
This patch adds a small function which checks if a key is an encrypted
PKCS#8 key and then uses this function to figure out if a PKCS#8 header
and footer should be used (note that I only do this for encrypted PKCS#8
keys since, as previously mentioned, unencrypted keys are read correctly
by openssl).
The passphrase is now also passed to the QSslKeyPrivate::decodeDer
function so DER-encoded files can actually be decrypted.
[ChangeLog][QtNetwork][QSslKey] The openssl backend can now load
encrypted PKCS#8 DER-encoded keys.
Task-number: QTBUG-17718
Change-Id: I52eedf19bde297c9aa7fb050e835b3fc0db724e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Properly handle single protocol TLS configurations. Previously,
due to the use of generic (non version-specific) client/server method
they worked as ranges of protocols instead. This also fixes a couple
of previously broken tests.
Task-number: QTBUG-67584
Change-Id: Ied23113a4fab6b407a34c953e3bd33eab153bb67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reduces the timeout from 10 seconds to the default 5, but the tested events
(resize events, painting) seem like something that should happen in 5 seconds.
Change-Id: I1d12372f37264bf7be64096e43813cd03f567102
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
BuiltIn inputs shouldnt be translated into a code input. We comment the
input line for this variables
Change-Id: I3b7d2fd06afc6a122d90a999fc5a5246fc93234e
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The cost for the pixmap cache was calculated in bytes but
setCacheLimit() takes the size in kilobytes. This lead to the
situation that all values above 2097152 overflowed and disabled
the caching completely. Fix it by calculating the cost in
kilobytes as it is done in QGLContext.
Task-number: QTBUG-45293
Change-Id: Ib8dc2360c8f3201ce0b615a04c38b5ccaa8fc6cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add functions for converting QImage to HBITMAP and back
supporting additional formats of QImage (RGB888, RGB555,
Indexed8 and Mono). Add test with roundtrip to tst_qimage similar
to tst_QPixmap::toWinHBITMAP().
Task-number: QTBUG-51124
Change-Id: Ib568898e7162686bfa527d828785628eb0b78e21
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It's useful when you need to check how long a hash will be without first
generating one.
[ChangeLog][QtCore][QCryptographicHash] Add a static method, hashLength,
which returns the length of the output of a hash function in bytes.
Change-Id: Id6a454016523de83d157fd95c50105c6db4bb1d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test was failing because the files it expected to create were not actually
visible on the disk.
This was because 189e9c93d7 made QTemporaryFile
use unnamed files if the file name is not actually requested. Fix by forcing the
temporary file to be made with the requested name.
CI has not caught this because the test executable is marked insignificant_test
on Linux.
Change-Id: Ibe0244fdfcc66acf3be4314da51b4c0b3b520b71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Except RHEL-6.6 and 7.4
It was blacklisted in f3939d943e, along
with a lot of other entries. No specifics are known about why it was
blacklisted originally, but now it only fails on RHEL because they
use OpenSSL 1.0.1.
Change-Id: I6d1d1b7b7bf5386b2115b8780163550cf03bbad7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On Wayland, manipulating the clipboard requires an input event serial, which is
not possible to get unless the compositor sends us input events.
Change-Id: If5231a5db85f8d6ad988ea93f240cee0c3466f9f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This makes the tests pass on Wayland compositors that don't automatically give
focus to newly created windows. Such as a headless Weston, which is very useful
for testing.
Task-number: QTBUG-66846
Change-Id: I502504b333499c89be193a3ebc19d41264a13580
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Instead of an unconditional wait.
The QSKIP is necessary because the PDF format is non-native and the Windows
implementation of QPrintDialog doesn't work then.
The macOS implementation has the same warning, so add the check for that OS
as well.
The test has previously passed, since it hasn't seen not actually opening the
dialog as an issue.
Change-Id: Ib53e378b232580358f13e0c5206404412f9e6ee2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is a long overdue change so we don't break ADL of operator|.
I think will not break source or binary compatibility.
The problem is code like this:
namespace Foo {
struct MyStruct;
MyStruct operator|(MyStruct, MyStruct);
void someFunction() {
fooLabel->setAlignement(Qt::AlignLeft | Qt::AlignTop)
}
}
This would be an error before as ADL would find only the Foo::operator| and not
the global one since the arguments are not in the global namespace.
After this change, ADL works fine and this code compiles
This bites people with misterious error, see questions on
https://stackoverflow.com/questions/10755058/qflags-enum-type-conversion-fails-all-of-a-suddenhttps://stackoverflow.com/questions/39919142/broken-bitwise-or-operator-in-a-qt-project
[ChangeLog][QtCore] QFlags's operator| for enum types in the Qt namespace are
now declared in the Qt namespace itself.
Change-Id: I021bce11ec1521b4d8795a2cf3084a0be1960804
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The TZ database has recently revised its ccount of when they skipped a
day to cross the international date line, from skipping Jan 1st 1995
to skipping December 31st 1994. So Move the before-days check to
December 30th; and correct the Feb 2nd that was meant to be Jan 2nd
(and does need to remain so, for compatibility with systems with out
of date data).
Task-number: QTBUG-67497
Change-Id: I5b9483c553205817f995f91793662a5a85e03192
Reviewed-by: Liang Qi <liang.qi@qt.io>
OCIBindByPos2 is only needed when using execBatch(), binding data that
is longer than USHRT_MAX works for exec() so this is left unchanged.
Change-Id: Ifdcf91939d184f225d24c13052ea0b81611ecf91
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no need to qWait() before a QTRY_VERIFY. qWait() will also
intermittently handle events while waiting, so calling it in a loop isn't
necessary.
Change-Id: Ica7fbf18c03e673213dd9b72f31f71937cdcb145
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_ASSERT(mimePrivate.fromCache) at qmimedatabase.cpp:218
which I added in commit 7a5644d648, was being triggered when calling comment()
for invalid mimetypes such as db.mimeTypeForName("").
Change-Id: I8037041a4b435d2a5ba24ec94b7858e38b2f0bf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the db isn't valid, then that's the actual issue, not the fact that we're
getting the same invalid db (with the same driver QSqlNullDriver) in
multiple threads.
Change-Id: I95490818ed78e741c3823e115f139c2cff01b0b1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Also use data-driven test to reduce duplication.
Change-Id: I9516e52267cb3c7b239030fd73dbbf23ac8f52f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes an irreversible global change: tests that do it will mess
with other tests. So make sure they're all last. This required
splitting up one test; and revealed another that secretly depended on
being run with C as default locale.
Task-number: QTBUG-67276
Change-Id: Ic24ef48b2c9bd5c37c1f11260b437628019624ca
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
The test creates client and server sockets with mismatching protocol versions,
trying different combinations, for example: 1) server (TLS 1.0) vs
client (TLS 1.2) or 2) server (TLS 1.2) vs client (TLS 1.1), etc.
Since TLS v < 1.2 does not support signature algorithms, they are ignored
and handshake is always successful. But our new OpenSSL 1.1 backend uses
generic TLS_client_method and TLS_server_method when creating SSL_CTX.
This means, both server and client will support TLS v. 1.2, they
will have no shared signature algorithms, thus handshake will fail
with an error string similar to this:
"tls1_set_server_sigalgs:no shared signature algorithms".
For OpenSSL 1.1 this test makes no sense.
Task-number: QTBUG-67456
Change-Id: Ibb2a12eea5e5c0ebaeee7d0719cc721ecf4763e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Do not let a global qtlogging.ini interfere with an autotest.
This works around an issue on Ubuntu 17.10
Task-number: QTBUG-67385
Change-Id: I0d02835eb7a561b43fe0b98f4383c170c6d51303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
As setting cursor position is not allowed on Wayland.
Task-number: QTBUG-66824
Change-Id: I1f065b7072dff13b1ee8a4fc3ccec347e8d71ed1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Uses the scripts and tests we already have for lancelot as a painting
benchmark.
Change-Id: Idf8a55e2261162e619f6dbb567dc19f8dc96da4e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead use QSignalSpy to wait directly for the expected events.
Change-Id: I319302ea7177fe690b5d885347c505454904518e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
It is suspected that the fault actually lies in CI infra.
Amends e3cf2a1ae9.
Task-number: QTBUG-66311
Change-Id: I967da283f0b94be1d0b99481d0cbd15ca7f98d45
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These two places were sort of manually implementing QTRY_VERIFY except that they
never time out.
Change-Id: I136e6c7400194327c0475c6acfc019825ccec1b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Use QSignalSpy::wait or QTRY_VERIFY instead. This shaved off ~200 ms of the
running time of the test and is more reliable.
Some unconditional qWait()s still remain in this test. They are giving an
opportunity for the wrong thing to happen and thus are not waiting for any
specific condition to be fulfilled.
Task-number: QTBUG-63992
Change-Id: I25a4470fe8d6a5b8b5039b3ed77321d24faa1707
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This method will make QRegularExpression on par with QRegExp and
will allow to replace this class when a wildcard expression can be
set through an API (e.g. QSortFilterProxyModel::setFilterWildcard).
For other use cases, see QTBUG-34052.
[ChangeLog][QRegularExpression] Implemented support for wildcard
patterns.
Warning: QRegularExpression might not give the exact same result
as QRegExp as its implementation follows strictly the glob patterns
definition for the wildcard expressions.
Change-Id: I5ed4617ca679159430c3d46da3449f6b3100e366
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use QTRY_VERIFY instead of hard-coded wait for the tooltip to appear.
Also use QTRY_VERIFY to verify that no top level widgets are left over
to account for tooltips and effect windows.
Change-Id: Ia9835fdc480c6abb034f6fc4ad3d6b32751ee536
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
when the QFile object is already constructed, querying whether the file
exists is actually cheap, so do it right away instead of later on
demand. that makes the calling code a bit cleaner.
fwiw, that we need to explicitly query the file's existence at all is a
result of QFile's completely useless error "codes" (which merely say
which function failed, as if the caller would not know).
Change-Id: Ifec39d05b1713d8128046f679287e510f10e45dc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/5ba32e3484ead2e35cc7732dcd59a97e7459dbfd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Has been flaky on those platforms in CI.
Task-number: QTBUG-67254
Task-number: QTBUG-66216
Change-Id: Ia1a718a23b1992fcc0e85bf49b714bc43acc4ce2
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Otherwise the ::debug() test fails when a build does not print qDebug()
messages.
Change-Id: I3f3c4b3c7d74004abe5ed8d7ac52164d4f88ef1f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is what the other reporters also do, in various forms.
Task-number: QTBUG-67351
Change-Id: I16f2c4e0991176145ee0fbcbbfeeda071603a3c2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Also expands the tst_qsqlquery::batchExec() test to account for this
case and generally test the functionality. In addition it is made to be
more robust to avoid any discrepencies with the testing data. The test
in general is also cleaned up to enable more of it being tested with
the different database drivers where possible.
An expected fail is added for MySQL due to the fact that it has a bug
where null timestamp entries are being converted to the current
datetime when adding it as a bind value.
Change-Id: I0061bd1c69ae35b4858afc49420f13ce59cf48ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Many subclasses of QIODevice have a functionality to block execution
until some asynchronous I/O operation completes. In case we are using
QWinEventNotifier, a typical reimplemented waitFor{ReadyRead
|BytesWritten}() function could look like:
if (WaitForSingleObject(notifier.handle(),...) == WAIT_OBJECT_0) {
notifier.setEnabled(false);
ResetEvent(notifier.handle());
bool res = GetOverlappedResult(...);
...
return true;
}
Despite the fact that the operation ends synchronously, it leaves the
notifier in a state that indicates it has received the event, so its
next call to setEnabled(true) will produce a fake notification.
So, we should reset a notifier's history before enabling it again.
Change-Id: I62a9dd809ce6a7a40e9d8038f2a49299b36f8142
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Clipping enabled state would not always be correctly restored for the
raster engine (other engines work fine). The raster engine's QClipData
object is sometimes shared between painter state objects on the
save/restore stack. QClipData has its own enabled flag, and this could
then come out of sync. Fix by making sure we sync the enabled state on
restore.
Task-number: QTBUG-58789
Change-Id: I81e6254ebb93df6e153bbef58e32a885273e3224
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Previously, we would divide by zero in BezierEase::findTForX if factorT3
was zero when solving the cubic equation.
This change fixes the problem by adding solutions for the special cases
where the cubic equation can be reduced to a quadratic or linear
equation.
This change also adds tests that cover cases where the equation becomes
quadratic, linear or invalid.
Task-number: QTBUG-67061
Change-Id: I2b59f7e0392eb807663c3c8927509fd8b226ebc7
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
There are a couple of Qt classes where you almost always use the
same signal, for example QTimer::timeout, QPushButton::clicked,
and QAction::triggered.
Simply doing timer.connectTo([]{}) is much more convenient, less
tedious and even fun.
Not overloading connect() as it would be confusing to see the
receiver as first argument.
And not naming it onTimeout, as that's a popular way of doing it in
other frameworks. People would assume you could use on* with any signal.
If we ever have on* it should be all or nothing.
[ChangeLog][QtCore] Added QTimer::connectTo(), a shorthand way of
connecting to the timeout() signal.
Change-Id: Ida57e5442b13d50972ed585c3ea7be07e3d8e8d2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
disableNotifiersInActivatedSlot(disable_signaled2) fails, if a signaled
state of the event #2 is detected prior to the event #1. In this case,
we get a timeout on waiting for event #1 which was disabled by the
first notification.
So, accept a disabled state of the notifier in condition for successful
exit from the loop.
Change-Id: I8a2fe76f8ec9362556d1ca1fe0be39a93ed58977
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Adds the feature of adaptive decimal step sizes for the QSpinBox and
QDoubleSpinBox. By performing a calculation in
QAbstractSpinBox::stepBy() we continuously set the step size one power
of ten below the current value.
So when the value is 1100, the step is set to 100, so stepping up once
increases it to 1200. For 1200 stepping up takes it to 1300. For
negative values stepping down from -1100 goes to -1200.
It also works for all decimal values. 0.041 is increased to 0.042 by
stepping once, and so on.
The step direction is taken into account to handle edges cases, so that
stepping down from 100 takes the value to 99 instead of 90. Thus, a
step up followed by a step down -- or vice versa -- lands on the
starting value; 99 -> 100 -> 99.
Setting this property effectively disregards singleStep, but preserves
its value so that it takes effect again when adaptive decimal step is
disabled.
Adaptive decimal step allows values to be easily set to reasonable
levels. If the spin box value is 12000, changing to 13000 often makes
more sense than to 12001. The feature is turned off be default, when
single stepping is desired.
The accelerated property allows values to be changed quickly, as well,
but it is imprecise. Holding down the button makes it hard to land on
an even thousand, like 12000 or 13000. Often you end up somewhere
nearby and would need a second adjustment to get to an even hundred or
thousand.
[ChangeLog][QtWidgets] Add option of adaptive decimal step size for
QSpinBox and QDoubleSpinBox.
Change-Id: I9f286479b821e240c8ea05c238932fc128c582bb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test has been flaky on openSUSE in CI. The problem was that the window is
sometimes resized or removed while processing events after adding the rectangle
item to the QGraphicsScene. When the same mouse event is reused again, it uses
wrong screen coordinates. QGraphicsScene handling of mouse events then looks for
items under cursor at the wrong coordinates, does not find any items and thus
doesn't accept the mouse event.
Fix by using QTest API for simulating mouse events. Also wait for changed signal
rather than blindly running one iteration of event loop.
Task-number: QTBUG-67212
Task-number: QTBUG-66216
Change-Id: I968f9470c6f8803d01cebeda6f12ad76b4fd5293
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Thanks to QTBUG-61373, this qmake function was called with
/usr/local/5.10.1 as baseDir, which isn't absolute, leading to an
assertion failure. We could raise the error within qmake but it
proved easier to simply resolve any non-absolute baseDir using PWD,
before trying to use it as an absolute path.
Did the same for $$absolute_path(). Documented both. Adjusted the
assert that caught this to report any non-absolute path that upsets
it. Added simple tests, fixed an existing test.
Task-number: QTBUG-66156
Change-Id: Icfef2e2f5b236e071177c9beffa38d71bf404292
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We can use the QT_LIB_FOO #defines instead of our own WITH_FOO ones to
determine if a library is available. Also, it doesn't currently make
sense to refer to libraries which are not part of qtbase here. We might
add that in the future, but QtScript (being deprecated) is probably not
the first one we should add.
Change-Id: I7f2397ca5499ba6003088478161182e960e815fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
They are faster, and using them makes it paint commands be the most
CPU intensive part of lancelot instead of regular-expression matching.
Change-Id: Ifabf1081c48a83ce089660049051428fd3a43042
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When the thread that got woken up by release() is supposed to release()
to wake up another thread, we were deadlocking. This happened because we
cleared the bit indicating that there was contention when the first
release(). Instead of storing a single bit, we now store the number of
threads waiting.
Task-number: QTBUG-66875
Change-Id: I72f5230ad59948f784eafffd15193873502ecba4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
selectFile() is a no-op if the dialog is visible and
its line edit has focus, which will happen at some
point after show() is called.
In other words this is a race, and the test will pass/fail
depending on the timing of the platform implementation.
Task-number: QTBUG-66536
Change-Id: I03957edb6496d17af7a8ed1d4ca86435375e0d40
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don’t assume that there is an active modal widget
on QApplication::focusChanged(). That signal can also
be emitted on focus clear during dialog destruction.
Task-number: QTBUG-66536
Change-Id: I20c64339c56a52b39c26a7683b62779deba576d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add qWaitForWindowExposed() calls in addition to the
existing qWaitForWindowActive().
Depending on the platform, window activation events may
be synchronous, which means that a window can (and will)
become active before it becomes exposed.
This causes test failures for tests that count paint
event, and does not wait-for-exposed, when the expose/paint
event is delivered after waitForWindowActive() has returned.
We need to keep the waitForWindowActive() as well: the
test has several qWait() calls with he comment:
“Increase the probability of window activation not
causing another repaint of test items”.
These qWait() calls can possibly be removed in a future
commit.
Task-number: QTBUG-66536
Task-number: QTBUG-61967
Change-Id: Ie61bba058b583fdd1d80e600475aff3efccc32eb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test function was removed from the blacklist as
a part of the cleanup in 2056bc6b, but is still flaky
on CI.
Change-Id: I348ed167dff6fd618ede28456ada6da86ee341cd
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Resizing is broken on Wayland EGL on Intel Mesa. Move resizing into a separate
test and skip it on Wayland it until it's fixed in Mesa.
Task-number: QTBUG-66848
Change-Id: I9450a5a588b0f5d8f0bd0210aae2dc72aa48d622
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QRasterPlatformPixmap::systemOpaqueFormat returned QPlatformScreen::format
without checking that the format was actually opaque.
This caused several QPixmap tests to fail on Wayland because Wayland
compositors don't communicate the native format of the screen, just a list of
supported pixel formats, so we just return ARGB32_premultiplied in
QWaylandScreen::format().
Rename the method systemOpaqueFormat to systemNativeFormat since that's how
it's used most of the time. And do a conversion when we actually care whether
the format is opaque or not.
Task-number: QTBUG-51748
Change-Id: I47dc1c3f185fb802016ca361206d47d02e8d3cf1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Although not defined, the jpeg comment field 'content' is treated as
utf-8 nowadys. At least exiftool and exiv2 (tested via gwenview) are
expecting utf-8 here. So we should do the same.
Task-number: QTBUG-44709
Change-Id: If84dafac3e337c7993f09cd59792e721977c9adb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QTreeView is stretching the last section by default which was not
considered in this test. It worked by accident on linux because
there the default section size is 100 and the default window width
is also 100. On windows this was not the case and therefore the
test failed.
Task-number: QTBUG-51149
Change-Id: I9be1c1e942fc19817713773fe29d4afa93d73232
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This fixes the following:
- tst_QSqlDatabase::recordMySQL() to account for performance
improvements done for small integral types
- tst_QSqlQuery::nextResult() so that NUMERIC results are seen
as doubles
- tst_QSqlQuery::timeStampParsing() so that MySQL accepts the
CREATE TABLE statement
Change-Id: I68fb1d06dac12d500bb4596463f5bdd65cc9c226
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using a virtual table inside a SQLite database it is possible that
it does not report the right number of parameters. Therefore we need
to account for this case to prevent it from crashing when trying to
bind parameters it thinks does not exist.
Task-number: QTBUG-66816
Change-Id: I3ff70bb1fe73091f43c3df53616f75858e451cfd
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When network access is disabled, every QNAM request returns a
QDisabledNetworkReply instance, which emits error and finished
immediately. However isFinished() was still false, which could confuse
application code.
Change-Id: Ifd43c86364b11a9583a38fde536e6c09c109b55f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Matches glibc commit 9a0cc8c1bd7645bf3c988890ffb59639c07a5812.
[ChangeLog][QtCore][QUrl] Fixed a bug in parsing IPv6 addresses with
more than 4 hex digits in a component.
[ChangeLog][QtNetwork][QHostAddress] Fixed a bug in parsing IPv6
addresses with more than 4 hex digits in a component.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9a0cc8c1bd7645bf3c988890ffb59639c07a5812
Change-Id: I2701038131d91eb108aebb3bec16278e4efe3de2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit fdddb3a481.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66798
Task-number: QTBUG-66216
Change-Id: Iba353b18b0be1346007fde674a9f768c4b9bf384
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit a0db55040d.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66756
Change-Id: I4a8e8c62b4a021d144d570c38c4f4c10e8b1317c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Test Anything Protocol (TAP), was originally Perl's simple text-based
interface between testing modules and test harnesses, but has since been
adopted by a large number of producers and consumers in many different
languages, which allows colorizing and summarizing test results.
The format is very simple:
TAP version 13
ok 1 - test description
not ok 2 - test description
---
message: 'Failure message'
severity: fail
expected: 123
actual: 456
...
ok 3 - test description # SKIP
1..3
The specification [1] is very brief, so the implementation has been
based on how typical consumers behave, especially when it comes to
the undefined diagnostics block.
[1] http://testanything.org/tap-version-13-specification.html
Change-Id: I616e802ea380165c678510e940ddc6607d39c92d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Using QFileInfo to check if the file exists based on the filename
alone ignores the fact that all the expected files are embedded
as QRC resources.
The expectedResult() function already does a similar check, so we
can use that directly instead of checking twice if the file exists.
Task-number: QTBUG-66981
Change-Id: I0beb8d3503ed49682ae7d7e2a5172922fab5420d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 7257862fb2.
It has been reported that this patch causes widgets with certain effects
become invisible.
Task-number: QTBUG-60231
Task-number: QTBUG-66803
Task-number: QTBUG-66387
Change-Id: I9c3c4cf2f17ac639d1aee5489b665aa1e165af16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Rename getter QHeaderView::firstSectionMovable()
to QHeaderView::isFirstSectionMovable(), turn into a property
and fix \since.
Change-Id: Ica2ca43d22f3fd78ff63178ba75014807fc9b823
Reviewed-by: David Faure <david.faure@kdab.com>
Commit f55c73ede2 added various backendConfig methods;
API review for 5.11 pointed out that Config should not be abbreviated.
Change-Id: I3b294b44a030b2a6e4cdd034fa27583c228dfe42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the source model of a QSortFilterProxyModel has rows removed, a
mapping is performed in order to figure out which corresponding rows in
the sorted and filtered view of the model are affected. In doing so it
constructs a vector of removal intervals which are subsequently used to
emit rowsRemoved signals. In the case where many rows are removed (e.g.
all of them), many removal intervals are identified that are often
adjacent and could be simplified, which is what this patch does. i.e.
instead of emitting 3 rowsRemoved for 0-3, 4-6, 7-12, now a single
rowsRemoved is emitted for 0-12.
Change-Id: Ia503091cc4928378c88257cd8b431582e9ff454e
Reviewed-by: David Faure <david.faure@kdab.com>
They seem to be running just fine
Task-number: QTBUG-66849
Change-Id: Ia48d47c0fff173eb1d6eba38bdba752a91bd2b56
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QDir::isAbsolutePath(name) thinks any path starting with a slash is
absolute; however, to return a valid absolute path, we need to put a
drive prefix onto such a name. So use QFileSystemEntry::isAbsolute()
for that check (it believes in the need for a drive, or UNC prefix)
and handle the absolute-but-for-drive case when it arises.
Add a regression test and make related changes to existing tests.
Task-number: QTBUG-50839
Change-Id: Id5d2b2586bb1423fa2d9375a298a4bb5241cffe0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise random debug messages from Qt might mess up the expected vs
actual results.
The setting of QT_LOGGING_RULES in initTestcase has been removed, as
the selftest overrides that for each invocation of a subtests, via
the processEnvironment() function.
Task-number: QTQAINFRA-1631
Change-Id: I855d31274f8261f8b125df23409353f7101be0e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_GADGET macro cannot be used in templates. It can however be useful
to derive a template class from a Q_GADGET enabled base class to benefit
from type safety features in C++ (e.g. the class could represent an id
or handle for some C++ type).
For proper wrapping of a QVariant with a gadget value in a QJSValue, the
QMetaType::IsGadget flag must be set for the registered template
instance type - which does not happen prior to the fix because
IsGadgetHelper requires qt_check_for_QGADGET_macro to be defined in the
registered class but not in an ancestor class - in other words: The
class must declare Q_GADGET.
To overcome this, IsGadgetHelper/IsPointerToGadgetHelper can now
differentiate between a Q_GADGET flagged class (allowing
automatic registration) and a derived class, e.g. a template class
(forcing Q_DECLARE_METATYPE to be used explicitly).
[ChangeLog][QtCore][QMetaObject] It is now possible to use template
class instances inheriting from a Q_GADGET in Qml
Task-number: QTBUG-66744
Change-Id: I7632ad45cff79fa422b3f852ca0b963f35fab155
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Instead of keeping a static list in a qrc file.
Change-Id: I7783db5cad5929cc3f449889e1cbcbb87f7f2637
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Various tests were adapted to Q_OS_WIN to take account of the
deficiencies in its TZ APIs; which are now bypassed when ICU is
configured, as we use it instead. Replace some #if-ery on a local
define with QT_CONFIG(icu) and QMAKE_USE_PRIVATE += icu here, to match
in corelib/tools/tools.pri
Task-number: QTBUG-66367
Change-Id: Ia93abdeb7d12046310f0bb4a78c2669f8eecbbc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
That is correct C++. GCC (and apparently Clang) accept it after the name
for compatibility with the old __attribute__ syntax.
Change-Id: Ie7f3adaaed83198ca1c61bc0efdf51634e457b07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If buddy is deleted then QLabel will still try to deliver the
shortcut event to it, in QLabel::event(), and cras.
Besides connecting to destroyed() which alone fixes the crash,
also hardened it and guarded against dereferencing null buddy,
in the unlikely event of someone adding features to QLabel.
The second part is suitable for backporting to the LTS branches.
Task-Id: QTBUG-66841
Change-Id: Ib6a36a9f99cee31afe1f88eb77f5b6cafb8b1086
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Whitelist tests that pass locally and that have been
blacklisted since the BLACKLIST was introduced in
2015 (in commit a8dda3b8).
Change-Id: I777b490313ebaa6c8c8daee168487d350179a5e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test has been flaky on top of QEMU. The test is clearly a sort of manually
rolled benchmark, not a regular autotest. Remove the test and replace it with a
benchmark in QObjectBenchmark.
Task-number: QTBUG-66823
Task-number: QTBUG-66216
Change-Id: I7a48293023f32141eed6fea50fbb63af18933a8f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When QStandardItem::insertRows/Columns is called with an empty list
or an insert count of 0, do not assert but return false.
Task-number: QTBUG-66491
Change-Id: I328598e08584fb9b0a35075458bfeb31c57ebfee
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since Qt 5.4 the QTabBar can be automatically hidden when it has less
then 2 tabs. Therefore the sizeHint should not consider the tabbars
size when the tabbar is hidden.
Task-number: QTBUG-64715
Change-Id: I2f248f88d9070de5354f7344c7628a78442ab499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Postgresql needs a special value for nan and +/- inf. This was
considered during insert but not during select.
Also remove some pre-c++11 inf/nan - handling and replace it with
Qt equivalents.
Change-Id: I044ca58e9cf673f4b100b05a0d8e25c8a9c29ec5
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The printVolumes function already adds line endings.
Change-Id: Id2553f881ccc0ab3c8b8fc77d3096dd5d968abda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the current working directory, which doesn't necessarily match
the location of the settings file.
Change-Id: Idffe2e87190cc9b6027fbba3b84e9dbf72ccf2f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code that updates a section size must also update length,
otherwise saveState can end up saving inconsistent state, and
restoreState() goes to an early-return, not doing anything.
The actual bug was fixed meanwhile because _q_sectionsChanged is called
again, which recalculates length. I still see this only as a safety
measure, every other code path that changes section sizes updates length
right away.
Change-Id: I6cc16261692d93b3640afafef600a5bdff8dca0c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
all of these iterator classes already have a member operator+, which allows iter+int.
This commits addes non-member operator+, which allows int+iter, and forwards to the member
QList and QArrayData iterators now satisfy RandomAccessIterator concept
Change-Id: I25c1dd8cea299e735d5a5e288dbe23dc1d7a1933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before running tests that depend on QWindow::requestActivate
Gets rid of several Wayland platform checks in tst_QWindow.
Change-Id: I7a5e029044a968dfcf87ecbb5105c01d52852d35
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
And make it easier to fix if platformName == wayland-egl etc.
Change-Id: Ia2d62ba003796e08f3e8a5bbfd0c3fd9d185e4e0
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
By using qWaitForWindowExposed instead of qWaitForWindowActivated.
Task-number: QTBUG-66824
Change-Id: Idf604157070731d9c92ccf64d8349c8571960b7c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test actually passes, so there's no need to skip it.
Task-number: QTBUG-66824
Change-Id: Id091776ff7ca7637fdcf0e0ced833982b5788d92
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Has been flaky in CI.
Task-number: QTBUG-66815
Task-number: QTBUG-66216
Change-Id: I2c3eb42507eae618486aa402474b4b3f85ff310e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This follows on from a232251992 which
covered a similar instance of this. As with that change, we should not
abort the compilation, just ignore it.
Task-number: QTBUG-63772
Change-Id: Ide958080a90f43ed19edd8a320e7d45de1c96821
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When first starting an Android app we have invocation order issue, to
load the platform plugin we create the default QLocale (needed by the
resource locator code to see if :/qt/etc/qt.conf exists) so when the
android platform plugin loads and creates its own QSystemLocale, the
QLocale defaultLocalePrivate is already created and pointing to
globalLocaleData which means that systemData won't be called and thus
the code that triggers the call to QLocalePrivate::updateSystemPrivate
won't be called when calling QLocale().
I thought of two ways of fixing this, one was calling
QLocalePrivate::updateSystemPrivatea() from the QAndroidSystemLocale
constructor, but giving the responsibility to not break things to the
plugin seems a little fragile, so making the check on QLocale()
seems better.
Without this patch an Android app doing
QApplication app(argc, argv);
qDebug() << QLocale().name();
qDebug() << QLocale().name();
qDebug() << QLocale::system().name();
qDebug() << QLocale().name();
would print
""
""
"ca_ES"
"ca_ES"
now it correctly prints "ca_ES" the four times.
Task-number: QTBUG-41385
Change-Id: I2cf419f59aa008fa3aca11295fe7d42c40bcc32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Silence debug output by setting QT_LOGGING_RULES
to turn off all debug output.
Task-number: QTQAINFRA-1631
Change-Id: I5c2366b4fe4bac341dcfd92f68b6da8071c5b089
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Evaluating testlib's XML output in COIN would fail with:
"XML syntax error on line 7520: invalid UTF-8"
for the toLatin1() tests due to some Latin1/UTF8 mixup.
Add a helper function to convert the data to plain ASCII.
Task-number: QTQAINFRA-1797
Change-Id: I1c64878d4c2a67b8c2689905b5ffe6707b5963c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test has been crashing flakily recently.
1) It is creating a QGLWidget
2) It is stealing the QGLContext of that widget and moves it into a separate
thread.
3) In that secondary thread it makes the context current.
4) Meanwhile the QGLWidget itself may receive for example a resizeEvent or
other events and - since it assumes that it owns the context - attempts to
make it current.
5) Attempting to call makeCurrent() on a QGLContext that is in a different
thread than the current thread (via QObject thread affinity) will result
in a call to qFatal() and consequently the test aborts.
The conclusion from Simon Hausmann is that this test is testing a pattern from
Qt4 times that may or may not have worked back then. Nowadays with the Qt5
QOpenGL* API we do support this properly and there appears little sense testing
this.
Therefore remove the test altogether.
Task-number: QTBUG-66411
Task-number: QTBUG-66216
Change-Id: Ie2d66705bc7c3914ace6abcba9557c7c67ad4db3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This test executable was not flaky in the normal sense that when run, it
sometimes passes and sometimes fails. Instead, in some builds it would fail
consistently and in some builds it would pass consistently.
The first test to fail was version(ok00, default to last version) which gives
"mylib" as the library name and -1 as the library version. The description
implies that QLibrary selects the biggest or last used version when given -1.
However, versions less than 0 are not used at all. Instead the loading uses only
the name to select the library. Change the description to match.
So why did the test sometimes pass, sometimes fail? The test uses two library
projects lib and lib2 which install two different major versions of libmylib.
That includes the symbolic links:
libmylib.so -> libmylib.so.1.0.0*
libmylib.so.1 -> libmylib.so.1.0.0*
libmylib.so.1.0 -> libmylib.so.1.0.0*
libmylib.so.1.0.0*
libmylib.so -> libmylib.so.2.0.0*
libmylib.so.2 -> libmylib.so.2.0.0*
libmylib.so.2.0 -> libmylib.so.2.0.0*
libmylib.so.2.0.0*
The key thing being that both set the libmylib.so symbolic link. In a
multithreaded installation it's undefined which happens to set the link last.
The test code expected libmylib.so to point to libmylib.so.2.0.0. Ensure that by
building and installing lib2 after lib.
Task-number: QTBUG-66722
Task-number: QTBUG-66216
Change-Id: Ic513c772902273049c28e43fc1d83d550aafcd23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QJsonValue] fromVariant() conversion now converts
from QUrl and QUuid using special encoding forms to ensure best JSON
compatibility.
Change-Id: I56b444f9d6274221a3b7fffd150cdc5ca1f87ff1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
