when building additional modules against an already installed qtbase,
$$[QT_INSTALL_PREFIX/get] is obviously the same as
$$[QT_INSTALL_PREFIX], so we would misdiagnose a non-prefix build.
instead, use the same condition as qt_build_config.prf (we cannot just
rely on what it sets, because in qtbase configure context it's evaluated
before we set up the paths).
Fixes: QTBUG-60541
Change-Id: I37be30e0e682ece76ed460a66f1984ee0fe2ed71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... for debugging purposes.
this needs to work in every configure run even though the options
(currently) come from qtbase's global scope. this is accomplished by
automatically injecting the test type dependencies declared in the
'builtins' scope (where they generally make no sense whatsoever, because
there are no tests there) into other scopes (the first one that has a
test of the particular type, specifically). we do that *after* the
scope's own test type deps, so it can do its custom stuff first (it can
explicitly activate the required features if it depends on some global
stuff).
Change-Id: I67317da1b55804d39458bdbcf13d39a3e57a13bf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
there is no reason whatsoever to ignore the variable if it's set to an
invalid value. also, it being empty would lead to a warning from qmake
since a while.
so instead check it for emptiness like every other variable, not for
file existence.
Change-Id: I1119f67520d2986811501cd3f223f8f4a87d067d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Removes need to manually build up qmake command line when there's
already a Makefile generated (from a recursive qmake_all run e.g.)
Instead, just run 'make xcodeproj'.
Change-Id: Ibe91b183230721a4bcaddfde53b623df00f7adb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In NDKr18 Google removed GCC, most probably the massacre will not end
there and they will remove all GNU tools, so we need to start using LLVM
ones.
This patch still keeps the compatibility with GNU tools if the Qt was
built with android-g++ mkspec.
Change-Id: Ibe1979577e08ce63604d55fc5bbd5f64b3737675
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Allows a qt build to be configured to target arm64 desktop apps cross
platform and build them with nmake.
Change-Id: I99fed12047b45a504a1644201bcc19b18c69f3e6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
AR and NM have different tools when LTCG is used,
override those also when cross compiling.
Fixes: QTBUG-71595
Change-Id: I5347bd1874688dd89395c50ff6dd08fb1c0ebab1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need to support apps building against the 10.13 SDK, so that they
can opt out of dark mode and layer-backing. This does not mean we can't
require 10.14 to build Qt itself, but doing so should not require the
app to also build against the 10.14 SDK.
Change-Id: I53bd0fc8bf56c0be6614acec14d5173589e2620f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to inform the user when they have upgraded their Xcode version
and hence have a new SDK version, which requires a complete rebuild.
Explicit changes to the Xcode selection (be it via xcode-select or
$DEVELOPER_DIR) do not affect the existing build directory, so we must
record the Xcode selection inside the build to avoid false triggering.
Change-Id: I7d13da1232226712a4951e8a360cf4b634c6fa2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Removing the extra space before -MT ensures that the vcxproj
generator gets valid input.
Change-Id: Iccf88c5fc4473db406d714b646185a4fb60a3418
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The dependencies.json file allows to tweak the list of imports the
module is depending on, so that types implicitly imported are not
listed twice.
Task-number: QTBUG-70264
Change-Id: I7a3800e5ea713a8aaae0cddbf4e1607f92c41497
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The correct name is c++1z. Anyhow, this is easy enough to get wrong,
so make sure CONFIG += c++17 works as well.
Task-number: QTBUG-67527
Change-Id: Iea26b18824b38b1b5170f85987cf5c750b8e10ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
In NDK r18, libc++.so was renamed to libc++.so.XX where XX is the Android
API level.
[ChangeLog][Android] Fixed build issue with NDK r18+.
Task-number: QTBUG-70631
Change-Id: Id0d2955648197e3054e3c69263b5a90d57964f6c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
This broke the build for qtlocation.
This reverts commit 176a216f4f.
Task-number: QTBUG-70779
Change-Id: Ifd8419ffb88c1a9009319f39b11b4529b143477e
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Add properties enabled_features and disabled_features the respective
library targets.
This makes it possible to query the enabled classes in dependent libraries
(for example, Qt for Python).
Add a test verifying whether the Open GL configuration is reflected
correctly in the feature properties to the existing test_opengl_lib
autotest.
Change-Id: I645c947073dbb36da3be81de6bc62ee0ba1e73d6
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In NDK version r18, the libc++.so file we used for clang has been
removed. However, in r17 this was actually just redirecting to
libc++_shared.so, which is still available in r18, so we can
link directly to that instead.
[ChangeLog][Android] Fix build issue with Android NDK r18 and clang.
Task-number: QTBUG-70631
Change-Id: I658c0cabf49f27a47f38305de3c86067c8b18b25
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
in non-prefix builds, the forwarding headers always end up in qtbase's
build dir, while the injected headers always live in the build dir of
the module they belong to. to deal with that, we now record the target
path relative to the module root dir instead of relative to the base
directory of the forwarding header itself.
Fixes: QTBUG-70056
Change-Id: Ic4346148a125b13e2610f6965cdf4f5266ac763e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
39cb9ac873 moved the _ENABLE_EXTENDED_ALIGNED_STORAGE define from
msvc-version.conf to msvc-desktop.conf which basically removed the
define from winrt builds. By adding it to winrt's common qmake.conf
these builds are fixed.
Change-Id: I3d87c55fb52685859713f7466012b45c46145678
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add QMAKE_QMLPLUGINDUMP_FLAGS variable that allows plugins to set
qmlplugindump options like -app, -noforceqtquick.
The naming follows the example of e.g. QMAKE_LRELEASE_FLAGS.
Task-number: QTBUG-70264
Change-Id: I1d11b7f3b03fab79ab9e06188cecf31650789302
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Otherwise the SDK upgrade (or downgrade) may subtly and silently affect
the resulting binary, or if it results in build breaks, the user won't
know why.
We limit it to applications for now, as that's the point where it's
most important to catch the SDK upgrade, but technically we should
also do this for intermediate libraries. Doing it for everything
will likely incur a performance cost, so we skip that for now.
Change-Id: I8a0604aad8b1e9fba99848ab8ab031c07fd50dc4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This is the squashed diff from wip/webassembly to dev.
Done-with: Peng Wu <peng.wu@intopalo.com>
Done-with: Sami Enne <sami.enne@intopalo.com>
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Started-by: Andrew Knight <andrew.knight@intopalo.com>
Change-Id: I6562433c0a38d6ec49ab675e0f104f2665f3392d
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Move the definition of _ENABLE_EXTENDED_ALIGNED_STORAGE
to msvc-desktop.conf so that it becomes effective
for all compilers using MSVC (icc, clang-cl).
Task-number: QTBUG-50804
Change-Id: I5ff612cc0f5a712b855925f9bcf645e578e80504
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As planned, we only support the latest and previous release for these
platforms, and by the time 5.12 is out these platforms will all have
had new releases, so we should bump the deployment target now.
Change-Id: Ibbb7d07bb5d9a1007ab37b88d75781be2c1f7075
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
As discussed earlier, we don't want to keep backwards compatibility
for more than two versions in addition to the current macOS version.
Change-Id: I24df6fb4a08e14a9f842d209b8e0a6079c533b65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
After 0ef66e98cc was merged, the same should be done to
Windows ICC toolchain.
Task-number: QTBUG-69997
Change-Id: I1d76d8b59f87151a9064d9f7dcc3136dc1215633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the global flags are deprecated in favor of per-library paths, but they
obviously should still work. but apparently no-one cares, because there
isn't even a bug report about it ...
amends 90eee08b3.
Change-Id: I85aee41ca11de1715d1c750ae8e663093e012fb7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
the cherry-pick is needed to support QtWebEngine 5.12 with Qt 5.11,
a requirement that was raised too late.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 95b0e4c956)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some distributions do not define MINGW_HAS_SECURE_API globally,
resulting in methods like wgetenv_s not being declared in the
headers.
This is probably to keep compatibility with Windows XP. Anyhow,
we don't support Windows XP anymore, so we can safely add the
define.
Note that this is not necessary for the mingw-builds distro,
which is the only one we test and support. Anyhow, I don't
see any risk in adding these for other distributions.
Diff was provided by Philippe Dunski in the bug report.
Task-number: QTBUG-67443
Change-Id: I3a64b11541fe95e527ed44bbf8ad94469d457d3d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CONFIG+=lrelease enables that all .ts files in
TRANSLATIONS or EXTRA_TRANSLATIONS are compiled by
lrelease.
EXTRA_TRANSLATIONS is a new variable that is only
processed by lrelease, but not lupdate - this
is useful for translation files that are supposed to
be empty, because they match the language of the
original translation sources.
If embed_translations is also set, the generated .qm
files will be made available through the Qt resource
system under :/i18n/. Alternatively, the user can
specify an installation target by setting
QM_FILES_INSTALL_PATH.
Note that relative paths in TRANSLATIONS are not taken
into account. That is,
TRANSLATIONS = component1/de.ts component2/de.ts
will cause a conflict.
[ChangeLog][qmake] New CONFIG options lrelease and
embed_translations were added. CONFIG+=lrelease does
run lrelease on translation files listed in TRANSLATIONS
and EXTRA_TRANSLATIONS. CONFIG+=embed_translations does
include the generated .qm files as resources under
:/i18n/.
Change-Id: I94db5b8431d07b24f59b2c332ede91450f9c0c58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
To avoid (even more) duplicated code, "qt_test_helper" ensures the
policy of putting a test's helper application next to the test's
own executable.
The helper executable is suffixed with "_helper" to avoid name
clashes with its folder.
Change-Id: Ic50cb1daa257e7ffc75440c10a3b90fd39424683
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Instead of having tests installed into a folder named like their
target, we now use their source folder name for the installation.
An upcoming patch will rely on this behavior and simplify creation
of tests that need helper applications.
Change-Id: I17d9ff15edf502d82ab698627189532b83e72546
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
configure already does it for qt itself, so it's pointless to ever invoke
in default_pre.prf.
to make the exclusion work during the makespec reload during early setup,
we pull ahead the restoration of CONFIG, hoping it won't cause too many
side effects.
another change in qt5 will ensure that top-level builds are also covered.
finally, configure tests also need an explicit exclusion.
that way, attempts to re-configure build trees of commercial builds
after the day of the first configuration do not fail anymore.
Task-number: QTBUG-63452
Change-Id: I42264f64d7621784d4d67bde885a8e501f5ca413
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The Xcode project name may be affected by e.g. the -o argument to qmake,
so we can't assume it's based on the target.
Change-Id: Ibb9f4265017ffcfe26bd8734758dcb30237c704f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: Ib22d2fdca6a4819c1b4056e3207940ceebfbe365
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts the following commits:
d12d2949d126c3bec09b49b08f96e8
We can't easily predict all code paths for QDesigner
with such a microoptimization. We also don't want
to generate three different string constructions
depending on some sophisticated heuristics.
[ChangeLog][uic] The -no-stringliteral option is now deprecated and
UIC will not generate QStringLiteral anymore.
Task-number: QTBUG-65251
Task-number: QTBUG-51602
Change-Id: I34a5a1934a8df19c5c84ac2ba8e5168ce5665037
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QMAKE_BUNDLE is set then this should be used for the bundle
identifier value instead of the product name. This ensures that when an
application provisioning profile is used that it will correctly match
against it. This also brings it in line with the documented behavior.
Change-Id: I627d212f59d862e7a881941748db5ef98ab4f463
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
the sysroot flags need to be established even before setting up the
spec, because as soon as that happens, toolchain.prf will try to
determine the default paths and cache them.
this also fixes sysroot use in toolchain flag support tests, which run
(somewhat) independently from the toolchain setup.
Task-number: QTBUG-63483
Change-Id: I7be1540e766dac58fb16f63176aa8d2879b51ae0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the callback is specific to qtbase/configure.json, so it belongs into
qtbase/configure.pri.
amends d90db0f136.
Change-Id: I905f985e2d3d2e42c4587cbacdea8dc3eb09a5be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As the comment says, Haswell is a nice divider and is a good
optimization target.
I'm using -march=core-avx2 instead of -march=haswell because the latter
form was only added to GCC 4.9 but we still support 4.7 and that has
support for AVX2.
This commit changes the AVX2-optimized code in QtGui to Haswell-
optimized instead. That means, for example, that qdrawhelper_avx2.cpp
can now use the FMA instructions.
Change-Id: If025d476890745368955fffd153129c1716ba006
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Tell qtwaylandscanner to export the symbols when we're building a
module. This is done by specifying the include directory on the
qtwaylandscanner command line.
Task-number: QTBUG-68773
Change-Id: Ib575222261831ab01eb43e6c7caefb07e314492b
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated headers can now be installed using inject_headers and private_headers
instead.
Change-Id: I51d98e2e05d12aa9f6ab09f8ccb12b81a0c0cd6f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
"AVX512MIC" (Many Integrated Cores) is the set of AVX-512 features found
on the Intel Xeon Phi coprocessors (codename "Knights Landing"), which
is an unlikely architecture for Qt to run on.
The two profiles with VL came from study of early GCC code and are no
longer applicable. GCC source code now shows both VBMI and IFMA as part
of the -march=cannonlake feature set.
Change-Id: Iff4151c519c144d580c4fffd153a0f268919fe2c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a partial revert of commit:6c5d227da1709eb81968823f38a133747c0e95b0
All credits to Martin Afanasjew <martin@afanasjew.de> for the original patch.
Change-Id: Ib66303505888c821fc43eca213b956ce76acbbfa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The macOS framework build of Qt copies headers to each
framework instead of a centralized include location.
Update the .pc file generator to match this behavior.
Add two include paths to the .pc files:
-Ipath/to/lib/foo.framework/Headers
This makes #include <FooHeader> work.
-Fpath/to/lib
This makes #include <Foo/FooHeader> work.
Task-number: QTBUG-35256
Change-Id: I013ce161c904fe6b7bbb03e33c163d32fdda0647
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If CONFIG option no_include_pwd is set, moc does not add the build
directory to its include path. The path to the generated
moc_predefs.h file is by default relative though, resulting in
moc warnings:
Warning: Failed to resolve include "debug/moc_predefs.h" for moc file xxx myheader.h
Fix this by always making the path to moc_predefs.h absolute.
Task-number: QTBUG-69087
Change-Id: I8ef79c8340f9ebd6b0bba15e026d65ef3c088535
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
By using -march= instead of -x, we turn on some other processor features
too. This was already the case for AVX2, which enabled all Haswell
features (notably FMA, BMI and BMI2).
Change-Id: If025d476890745368955fffd153126fc9eafc5d6
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
linux-icc and macx-icc toolchains contain a significant amount of code
which can be merged to a common configuration file.
as a side effect, such merge resulted in reduction a parts of
linux-icc and macx-icc toolchains to the common view.
Change-Id: I37d110734eeeb9bd61ca0aa942de380ac8e75f1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows distinguishing between these tools and tools for the host,
when cross compiling.
While mac tools normally only are available on macOS, there are third
party efforts to port them to other platforms. In these cases, it
might be useful to use a prefix (either some sort of triplet prefix,
or an absolute path) to distinguish between the host build platform
compilers/tools and the ones for the cross target.
The use of this variable matches the one used in a lot of other
mkspecs, and shouldn't cause any issues for those who aren't setting
it.
Change-Id: Iaeba571d955ea79ed1249989fcc525eb1eaf1f5c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Do allow people to build from git using the Qt License Agreement 4.0.
The license agreement text is the same as in the installers, except
that some Unicode characters got normalized to their ASCII variants,
and things have been properly wrapped.
[ChangeLog][Licensing] The commercial preview license in the git
checkout has been replaced by the Qt License Agreement 4.0 text.
This makes it explicit that commercial customers of The Qt Company
can use the git version under commercial terms. However, support
is (still) only provided for builds from released branches of Qt.
Task-number: QTBUG-52222
Change-Id: I9e99b68e236a09610b798ba7a841e5a9d1ce6898
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Perfectly valid C++11 code trying to default-initialize an object with
{} is being warned. GCC 5 and up only warn if you initialize some fields
and not others.
qcborvalue.h:68:25: error: missing initializer for member 'QCborError::c' [-Werror=missing-field-initializers]
QCborError error = {};
^
Task-number: QTBUG-68889
Change-Id: I6efb28c3145047559ec0fffd1538577de250e283
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
as evidenced by things actually still working despite qmake_use.prf
not processing *_CFLAGS, this is not relevant for any makeSpec sources
any more, and was never relevant for other non-pkgConfig sources to
start with. localizing the code cleans things up.
as a side effect, configure won't emit a notice for dropped flags any
more, but will only log them to config.log. i think that makes sense,
as for the average user that would be only noise anyway.
Change-Id: Iaffde6474b786f5cbcbeac881850792563b74495
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the json format uses single strings for library sources, as that leads
to less noisy source text. however, this implies the need for de-quoting
and subsequent re-quoting whenever the values are processed. so change
the internal representation to regular qmake string lists as the first
thing when processing the lib source, and re-quote only when outputting
the values.
CFLAGS are excluded, because we'll deal with them differently.
Change-Id: I4ab43d98085ea9f6601fd21ac2afb5bce4f7e2a9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
wayland-scanner.prf uses it as a trigger, so this is needed to make dynamic
non-prefix builds work.
amends 427e5d61b7.
Task-number: QTBUG-68773
Change-Id: Ia7d3bc39cb2b0f225e827f64eb17d061d594b265
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need -Zc:__cplusplus in order to enable the __cplusplus macro having
the correct value. This causes configure to now print:
Checking for C++14 support... yes
Checking for C++1z support... yes
and
Using C++ standard ..................... C++1z
Change-Id: I5d0ee9389a794d80983efffd152c95a4d9d8adbc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new build system in Xcode 10 requires outputs from shell script
to be explicitly declared if they are used by subsequent build phases,
otherwise the build system may attempt to search for the file before
it has been generated, causing the build to fail.
The build phase we use for Qt preprocessing (moc, rcc, etc), does not
list these output files, so we need to disable the new build system
for now.
Change-Id: I7404c19021f57489e985bd1203ad09ce9b83b090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
otherwise, names like "core" are too likely to clash.
note that the directories (which contain configure files) still need to
have unique names within one repository. that's unlikely to be a
problem.
Task-number: QTBUG-68385
Change-Id: I01c60479a6a45494ba60e798ceada231d8870556
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
making the dependencies on tools/ optional was meant to maximize build
parallelization, but it's just too fragile, as nobody ever remembers (or
even knows) about having to add the flags when necessary.
Task-number: QTBUG-68478
Change-Id: I85c0b65d5a63109aedc24bc17eaaaf46b777b634
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When QMAKE_TARGET_BUNDLE_PREFIX is set in the .pro file then
this value should be used instead of the default value for
PRODUCT_BUNDLE_IDENTIFIER. Therefore, PRODUCT_BUNDLE_IDENTIFIER
should be set inside default_post.prf so that it can take the
value of QMAKE_TARGET_BUNDLE_PREFIX after it may have been set.
Task-number: QTBUG-66462
Change-Id: Iec1e2a43632efe6021b9d6bfdb78bd941326c456
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
instead of pre-resolving them and passing the final LIBS to qmake, pass
raw QMAKE_*_LIBS* assignments and a QMAKE_USE stanza. the immediate
benefit of that is that it centralizes the debug/release lib handling,
which makes build variant overrides available to all libraries, not just
a few selected ones.
note that this removes the CONFIG+=build_all from the test projects.
turns out that this was ineffective to start with, as config tests are
built with an explicit CONFIG-=debug_and_release. we might re-instate it
in a non-broken way later on.
Change-Id: I2117c5b36937e8230bd571dcee83231515cbe30b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this de-noises the code somewhat, and makes it possible to eval() the
code generated by $$qtConfLibraryArgs(), which we want to do later.
Change-Id: Ib6101c6745101801e34f8fab1ad6651e624130c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
