mingw-w64 toolchain:
- add missing compiler definitions, similar to
'msvc-desktop.conf' toolchain,
- describe the reasons of missing compiler definitions, available in
'msvc-desktop.conf' toolchain,
- add missing 'QMAKE_CXXFLAGS' and 'QMAKE_CXXFLAGS_WARN_ON' variables,
similar to 'msvc-desktop.conf' toolchain.
ICC on Windows toolchain:
- add 'QMAKE_CFLAGS_OPTIMIZE_FULL' variable, similar to 'gcc-base.conf'
toolchain, though left it unused for now,
- add missing flags to 'QMAKE_CFLAGS' variable, similar to
'msvc-desktop.conf' toolchain,
- update deprecated 'Qwd' flag with 'Qdiag-disable',
- use 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable instead of '-Od' flag,
similar to 'gcc-base.conf' toolchain (ICC implies '-O2' optimization
level by default, while MSVC implies '-Od'),
- add 'QMAKE_CFLAGS_UTF8_SOURCE' variable, similar to
'msvc-version.conf' toolchain; use a workaround to initialize it,
until '-utf-8' flag would be supported by ICC on Windows,
- update deprecated '-Qstd=c++1z' flag with '-Qstd=c++17',
MSVC toolchain:
- remove 'incremental' from MSVC 'CONFIG' variable, since it has
relevance only for the Unix generator,
- add 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable, used in ICC for Windows
toolchain,
- add empty 'QMAKE_LIBS' variable, similar to 'win32-g++' toolchain,
- add 'uuid.lib' library to 'QMAKE_LIBS_GUI' variable, similar to
'win32-g++' toolchain,
- add C++14 and C++17 language support flags, though left them disabled
for now, similar to 'win32-icc' toolchain.
Change-Id: Ideef62d0422674184836faa655bfc5d09a5f612f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Common changes to mingw-w64, ICC on Windows, and MSVC toolchains:
- set similar order of variables and its splitting into sections,
- set similar order of flags in variables and the way they are set.
mingw-w64 toolchain:
- move 'gcc-base.conf' include before setting Windows specific
flags, similar to include 'msvc-desktop.conf' in ICC on Windows
toolchain; this leads to consistency with other toolchains
and allows to safely override common GCC variables with Windows
specific ones, when needed,
- move 'QMAKE_EXT_OBJ' and 'QMAKE_EXT_RES' variables to the linker
flags section, according to its purpose.
MSVC toolchain:
- set flags order in 'CONFIG' variable, similar to mingw-w64 toolchain.
Change-Id: I417cc8f7959c669dd504f2c5c11eb879a7989bd4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Common changes to mingw-w64, ICC on Windows and MSVC toolchains:
- update toolchains description similar to 'gcc-base.conf'.
Change-Id: Ie456c6cec86c0d1c0107ca84a0fa7855666df91e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Define the lib dependencies for corelib in corelib.pro, where they
belong.
Change-Id: I973d3b0c571782d869b27dea243e899db4dddc43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
System headers like tchar.h need the _UNICODE define, not UNICODE.
While qplatformdefs.h already provides _UNICODE when UNICODE is
defined, users might want to include tchar.h without Qt includes.
This is consistent with Visual Studio's default defines.
Task-number: QTBUG-61411
Change-Id: I2f604368080270d840f0dbb2cf273805d2ba5239
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As Qt applications using OpenGL are linked against these libs, merging
them into QtANGLE by default (780105f906)
was a binary incompatible change. This change restores the default
behavior to the one before given change.
If the user wants the libraries to be merged, he can pass
combined-angle-lib to configure.
Task-number: QTBUG-60373
Change-Id: Iedbd3f2ce9284fdde924cfae8d915d6d5fef00db
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Adds default off configure flag to use compiler optimizations
for size instead of the default speed/size trade-off.
Change-Id: I36702064ef2cc743d2d03a386adf5cefd5371b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For Android, Windows and xcb. Verified on Win10 with NVIDIA, Win10
with AMD, Android with Tegra K1, Android aarch64 with Tegra X1, and
Linux aarch64 with Tegra X1 (Jetson TX1, L4T).
Introduce QPA-based Vulkan library loader, core function resolver, and
instance creation support. In addition to creating a new VkInstance,
adopting an existing one from an external engine is supported as well.
The WSI specifics are hidden in the platform plugins. Vulkan-capable
windows use the new surface type VulkanSurface and are associated with
a QVulkanInstance.
On Windows VULKAN_SDK is picked up automatically so finding vulkan.h
needs no additional manual steps once the LunarG SDK is installed.
[ChangeLog][QtGui] Added support for rendering to QWindow via the Vulkan
graphics API.
Task-number: QTBUG-55981
Change-Id: I50fa92d313fa440e0cc73939c6d7510ca317fbc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The AES instructions were first introduced with the Westmere shrink
(22nm) of the Nehalem architecture. The SHA instructions are still
pending on Intel architecture, but is available on AMD family 17h (gcc
argument -march=znver1).
Both features operate on SSE registers, so that's why the MSVC command-
line argument is the SSE2 one and the configure-time tests depend on
features.sse2.
The qmake feature names end in "ni" because "aes" and "sha" are too
simple and could clash with other uses. The QT_COMPILER_SUPPORTS_ macro
doesn't have the "NI" suffix because it has to match the GCC/Clang
predefined macro.
Change-Id: I445bb15619f6401494e8fffd149dbd1f862ff51c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since we can tell the MSVC version from the compiler now, each of the
qmake.conf files is now the same, so let's just have "win32-msvc" and be
future-proof. Likewise for win32-clang-msvc.
qplatformdefs.h was already common.
Since we can't obtain the MSVC version from the unified mkspec name any
more, I dropped the warning level during the qmake bootstrap to reduce
the number of warnings that need to be disabled from compiler version to
version.
There is no point in keeping the old mkspecs, but configure will re-map
the -platform argument to the unified spec as necessary, to keep
existing configure command lines working.
[ChangeLog][Visual Studio] Qt now has a common mkspec for all Visual
Studio versions, called "win32-msvc". The old names which contained the
version number are now gone (but qmake scopes based on the old names
continue to work). The version of the compiler can be obtained from the
MSC_VER and MSVC_VER variables (for example, for Visual Studio 2015,
those contain the values 1900 and 14.0, respectively). Those variables
are also available with the Intel compiler (win32-icc) and with Clang
(win32-clang-msvc).
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ib57b52598e2f452985e9fffd14587c0a77a5c09c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We're asking the compiler anyway, so we can fully use this information
just as well. Note that this actually happens after the spec itself has
been processed, so it was necessary to delay the version-specific flag
handling as well.
Change-Id: Ib57b52598e2f452985e9fffd14587b581d946022
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this makes it consistent with the determination of the default
include/library paths. this makes sense, as it's possible to switch the
sdk/toolchain after building qt (within reason).
a side effect of this change is that for compilers which emulate other
compilers, both the real and the emulated version are now made
available.
Change-Id: Icfcc672c0d2e3d1b5e622993c366063d70ad327c
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is needed in order to be able to specify a custom location of
the ANGLE libs, and enables us to perform a LoadLibrary of ANGLE libs
by just having the absolute path to QtANGLE.dll as the argument to
LoadLibrary().
Previously, we had two ANGLE libraries: libEGL and libGLESv2. libEGL hard
linked against libGLESv2. If we wanted to load libEGL from a custom
location, we couldn't load libEGL by calling LoadLibrary with the absolute
path to libEGL, because libEGL had problems finding libGLESv2. One
solution to that could have been to call SetDllDirectory() with the path
to the ANGLE libs before calling LoadLibrary("libEGL.dll"). Since the DLL
directory would point to both ANGLE libs, this would ensure that the libGLESv2
was also found. Unfortunately, this approach is not thread safe
(SetDllDirectory will affect all subsequent LoadLibrary(Ex) from the same
process). Therefore, we chose to merge the two libraries into one to
circumvent the whole problem.
At the same time, this patch also enables loading of two different ANGLE
libraries into the same process at once without renaming them: This was
not possible before because libEGL hard linked to libGLESv2.dll. When
libGLESv2.dll was already loaded, the second instance of libEGL would
simply link against the already loaded version of libGLESv2.dll.
This behavior is documented in the LoadLibraryEx documentation on MSDN:
"If the string specifies a module name without a path and more than one
loaded module has the same base name and extension, the function returns a
handle to the module that was loaded first."
Change-Id: Ic1d886ba802be72ddcf01235bafaedcef662762e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
That implies we need to differentiate between a variable set but empty
and an empty variable. GCC, Clang and the Intel compiler accept -msse2
on 64-bit builds without warning (they also accept -mno-sse2), but the
Microsoft compiler does not have that option.
Change-Id: I54233388ba10994996ae3e749fd829085e8fd7b7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is needed to be able to use Qt (with dynamic ANGLE) in a plugin
while the host runs a different version of Qt (and ANGLE).
In addition to changing the LIBEGL_NAME and LIBGLESV2_NAME variables
you also need to update the value of the LIBRARY definition in the
.def files for ANGLE:
qtbase/src/3rdparty/angle/src/libGLESv2/libGLESv2[d?].def
qtbase/src/3rdparty/angle/src/libGLESv2/libEGL[d?].def
Task-number: QTBUG-48431
Change-Id: Idd00d039ba3e20cc0ec7496bee36ed1c90383b0d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Visual Studio version specific changes have been added to msvc-
desktop.conf which is not used in WinRT or Windows Phone related builds.
Hence take a similar approach to gcc and introduce msvc-base to be used
by all configurations for common settings.
For WinRT this will only be applied to msvc2015 and later on to not
introduce any regressions or behavior changes for previous versions.
Change-Id: Ib1a4d539d46d788470c00cb5969fee74a803bd67
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
make sure that all specs define QMAKE_{PREFIX,EXTENSION}_{SH,STATIC}LIB,
and adjust the code to make halfways consistent use of these variables,
in particular on windows; Win32MakefileGenerator::getLibTarget() is gone
as a result, as is QMAKE_CYGWIN_SHLIB. still, tons of hardcoded "lib"
references remain in the unix generator, because no-one cares.
Change-Id: I6ccf37cc562f6584221c94fa27b2834412e4e4ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Fix the flood of warnings:
src/corelib/global/qflags.h(52): warning C4577: 'noexcept' used with no exception handling mode specified; termination on exception is not guaranteed. Specify /EHsc
now occurring since we don't have exception handling enabled.
Change-Id: I05d12ee6303b4f9fceb48507fadfd7d1a5604ea4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Most people's yacc are actually a symlink to bison. On Windows, where
symlinks don't usually exist, we can use bison -y.
This was tested with MSYS Bison.
Change-Id: I913745d48af30f9ef7b846b6438500261dd6022d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This issue had been fixed by SHA: a12a2fdf68
but re-introduced by SHA: c23d1c7695 again.
Task-number: QTBUG-45085
Change-Id: If98ee108335d80035179a83b1b28f384395d8373
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
We've been setting the -Zm argument since the dawn of times (even before
the first git commit). Anyhow, MSDN from VS2008 onwards indicates
that this is not needed:
"In earlier versions of Visual C++, the compiler used several discrete
heaps, and each had a finite limit. Currently, the compiler dynamically
grows the heaps as necessary up to a total heap size limit, and requires a
fixed-size buffer only to construct precompiled headers. Consequently, the
/Zm compiler option is rarely necessary."
[ChangeLog][Compiler Specific Changes] Visual Studio: -Zm200 (an option to
specify the precompiled header memory allocation limit) is not added anymore
by qmake to the compiler calls. If you encounter an C1076 compiler error you
might need to re-add it in your .pro file.
Change-Id: Ia4bec7eba09d893a7d81886a1814602b9ce7563c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QtWebEngine and QtWebKit uses the Qt config to detect if C++11
is enabled. Since it is always enabled on MSVC, we can safely
set the flag indicating it is a C++11 build when using a newer
MSVC version.
Change-Id: I2efb8d1a9b1cf1496481569403c00358d0cae365
Reviewed-by: Michael Brüning <michael.bruning@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move compiler warning 4996 from level 3 to 4. This is needed to avoid
warnings about the use of C++ standard library functions like std::copy,
which is used e.g. in qvector.h (since c6752c5aa1):
'std::copy': Function call with parameters that may be unsafe -
this call relies on the caller to check that the passed values are
correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS. See
documentation on how to use Visual C++ 'Checked Iterators'
Because the warning has to be disabled before any standard C++ header
is included one cannot just fix this locally in qvector.h.
Change-Id: I929f1535656bca9f5beb7fd0d557178370c232c6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Tested with the Preview release of November 2014.
Differences to the 2013 detection and support:
- Option -Zc:strictStrings is present in both debug and release mode
and is passed to qmake's own build
- New warnings 4456, 4457 and 4458 (shadowing) are disabled
- Compiler supports -arch:AVX2
Change-Id: I9572ff4d4aded4004c1fa5d6f13ffee5462043d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Most files are exactly the same, so it's silly to duplicate this all
over. The differences could have been kept in each of the qmake.conf
files, but I preferred to centralize because they apply to each newer
version and, soon enough, version-specific configuration would grow
again.
Change-Id: I5c5ed58055c954acf4851d87c70cc5af49c98738
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
