We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QTreeView is stretching the last section by default which was not
considered in this test. It worked by accident on linux because
there the default section size is 100 and the default window width
is also 100. On windows this was not the case and therefore the
test failed.
Task-number: QTBUG-51149
Change-Id: I9be1c1e942fc19817713773fe29d4afa93d73232
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The code that updates a section size must also update length,
otherwise saveState can end up saving inconsistent state, and
restoreState() goes to an early-return, not doing anything.
The actual bug was fixed meanwhile because _q_sectionsChanged is called
again, which recalculates length. I still see this only as a safety
measure, every other code path that changes section sizes updates length
right away.
Change-Id: I6cc16261692d93b3640afafef600a5bdff8dca0c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QHeaderViewPrivate reimplemented _q_layoutChanged() to handle changes
of rows/columns via layoutChanged/layoutAboutToBeChanged. This worked
fine for Qt4 but since Qt5 only the special signals rowsAboutToBeMoved/
rowsMoved are used for this (8021e2d5e7).
With this change, QAbstractItemViewPrivate::_q_rows/columnsMoved() is
calling the virtual function _q_layoutChanged(). This resulted in a
wrong call of QHP::_q_layoutChanged() for a horizontal header when
a row changed and for a vertical header during a column change. In the
end this can lead to an unhide of hidden sections.
Task-number: QTBUG-54610
Change-Id: Ide4bfc5b24a97746fd1e5af82d3ba08257149157
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QHeaderViewPrivate::_q_layoutChanged() was not called when used in a
QTreeView because it was explicitly disconnected in setModel().
The disconnect was added sometime prio to Qt 4.3, but there the signal
was connected to the doItemsLayout() slot. This was correct since
QTreeView::doItemsLayout() is calling header->doItemsLayout().
In Qt 4.3.0 _q_layoutChanged() was introduced and the disconnect was
adjusted. But since _q_layoutChanged() is doing much more than
doItemsLayout() (e.g. restoring hidden sections), functionality was
lost. The problem was already observed for Qt 4.6 (QTBUG-18196) but
only partially fixed.
Task-number: QTBUG-41124
Task-number: QTBUG-54610
Change-Id: Id13a9930d0163812e12a0287016bab9c3aa02068
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Since the first item in a treeview might be hidden, start from the
first visible item in the view when starting or wrapping round
during a keyboard search.
Task-number: QTBUG-63869
Change-Id: I202bea567c6d4484c3ffaf8a5f9af8ea2e13708d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When calling QTreeView::hideColumn() the row heights are not
recalculated. This can lead to rows which are unnecessarily high due to
hidden columns may contain large (e.g. multiline) content. The same
applies to showColumn() - there the row might be to small.
Hiding columns directly via QTreeView::header()->hideSection() is not
covered by this patch since QHeaderView has no way to inform about
newly shown/hidden sections.
Task-number: QTBUG-8376
Change-Id: I20b1198e56e403ab8cf649af76e5e2280821dd68
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Make the function brace policy consistent.
Change-Id: Iaf1f05a63958f19927e9b1953da06f99a4eba644
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When scrolling to the bottom of the view, if there are expanded items
then it should call canFetchMore/fetchMore up the chain until it
finds one with more items that can possibly be retrieved.
This brings it in line with the QAbstractItemView implementation
which would call canFetchMore on the root index, therefore we
go up the chain to the root to see if anything before that can be fetched.
[ChangeLog][QtWidgets][QTreeView] QTreeView now calls canFetchMore and
fetchMore when the bottom of the QTreeView is scrolled to.
Task-number: QTBUG-48725
Change-Id: I2b2145684bb34c8c317bfce4a0ef14f243a64719
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When the mouse is moved over a header section then if there is a status
tip then this should be sent as an event like it would for a typical
QAbstractItemView.
Also adds a test for the StatusTipRole for the QTreeView itself as well as
the header.
Task-number: QTBUG-2066
Change-Id: Iaef8d91f1bd621c2463cde2dff4b2291fb037975
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
As reported by UBSan:
tst_qtreeview.cpp:2187:36: runtime error: downcast of address 0x7ffc15749f20 which does not point to an object of type 'PublicView'
0x7ffc15749f20: note: object is of type 'QTreeView'
Fix by making the test a friend of QTreeView (and, for
Clang, of QAbstractItemView) instead.
Change-Id: I5b748696ab441a91058f4d45a18bd5ed75a6e560
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As reported by UBSan:
tst_qtreeview.cpp:663:5: runtime error: load of value 4294967295, which is not a valid value for type 'DragDropMode'
Instead of abusing -1 to indicate to not set the dragDropMode,
use a separate boolean field in tha data.
Change-Id: I13e7539c858f3b2462d57d660062ef3cb7aec61b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was made insignificant for Windows in change
f3939d943e. As the failure is not
reproduceable locally, re-enable it. Also split apart the test.
Task-number: QTBUG-51149
Change-Id: I6a06bdf2369bc3bdbc73dfe4fa416e9d644f8b01
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
On OS X, the default scrolling mode of item views should be
per pixel instead of per item. We enforce this through a new
style hint. On all other platforms, the behavior remains the
same.
It's still possible to override the style hint by using the
regular scroll mode setters. Any subsequent style change will
result in a no-op once the setters have been called and until
the properties are reset.
Some auto-tests had to be update to to take the new behavior
into account.
[ChangeLog][QtWidgets][Styles] Added SH_ItemView_ScrollMode
style hint.
[ChangeLog][QtWidgets][Item Views] Item views scroll per pixel
on OS X now.
[ChangeLog][QtWidgets][Item Views] QAbstractItemView::verticalScrollMode
and QAbstractItemView::horizontalScrollMode are now resettable.
Change-Id: I3f923275c99aa4389323b52fc1c5455fe71f8d73
Task-number: QTBUG-50102
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The documentation says that we scroll one pixel, but changing the
behavior in 934f062203 to do that
was not well received.
People were relying on the undocumented behavior - and the new behavior
was considered to be a regression. (Nobody called setSingleStep since
Qt in many cases provide a reasonable singleStep - which implied that their
programs scrolled with 1 pixel which was quite slow). Furthermore getting
the old behavior (auto set of single step) was nearly impossible.
However the revert (done in 0e69230d02)
gets us back to QScrollbar::setSingleStep not working in pixel scroll mode
(even without it being documented - but we should also have a working API
rather than documenting that it is not working)
The previous approach was directly prevented Qt from changing
single step (on e.g resize) at all. This patch only prevents Qt from
changing when a user explicitly has called the function
QScrollBar::setSingleStep (in pixel scroll mode).
That is we expect that calls to setSingleStep means that the user actually
wants to set the singleStep and doesn't want Qt to control that value.
Furthermore it is possible to switch back to the automatically adjusted
singlestep with QScrollBar::setSingleStep(-1).
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
when scrollMode is set to scrollPerPixel, it is now possible to
change the single step. Qt will automatically adjust the single step
until setSingleStep is called. When setSingleStep is called it will
however respect the set and stop doing automatic changes of the value.
Calling setSingleStep(-1) will switch mode back to automatic adjust.
Task-number: QTBUG-7232
Change-Id: Ibfe0caa9751d3bcc11bfc6e0654a3d1ac35ac8ae
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The test is moved from tst_qtreeview to tst_qtreewidget as it tests
qtreewidget class.
C++ usage is fixed, there was an illegal C cast that was causing crashes
Change-Id: I80e90a9b531e87f9b133186b6f48be42f54901b5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
