Instead of hard-coding the SDK and deployment target.
A host build will already use the host-makespec, so now that we
always build against an SDK, these mkspecs will have the SDK and
deployment target set.
Change-Id: I2b0343ae75f7de12081bab8346307b96b3883f62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't want to hit the network, as a flakey network or slow server will
hang the XML parsing. We assume the XML is well formed.
Change-Id: Idc4898a925a46222954bf633a04ea9fe148c6797
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This file is now included by three types of Qt output: modules,
plugins (including QML plugins) and tools.
Change-Id: I5085f6ff37f70e9228303bf0520040adc2e2d7a5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
configure.prf checks if MAKEFILE_GENERATOR is set
to something it can work with. ios/default_pre.prf
unsets MAKEFILE_GENERATOR.
This breaks QtMultimedia at least. Add special case
for iOS to configure.prf and set QMAKE_MAKE to "make".
Change-Id: Ie8feaeefe4a932d735a0cd4c09e869ca1341aae5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In case they provide their own main that calls UIApplicationMain.
Change-Id: Ia050277ae5cbcbf01bc57b87ec37a74db9568059
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Ideally we'd only have to do QTPLUGIN += ios, but this doesn't work as
we need to link with the force_load linker option. Even trying to build
on QTPLUGIN and then replace the -l line with what we need will fail, as
the prl logic in qmake which runs after all the prf files does not know
about the force_load option and will then fail to resolve dependencies
from the prl file.
Since we load the platform plugin using -force_load, there's no need to
generate a cpp file that does the plugin import.
The main wrapper is not a real Qt plugin, and doesn't have an import
function that we can call, so we link it manually instead of relying
on QTPLUGIN.
Change-Id: I0381a3c9ed7f8d41a4121e1fc0b7c0e210a8b832
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
As long as Qt Creator does not provide any iOS integration, and the
app bundle we create using the Makefile generator is not good enough
to deploy to a device anyways, producing Xcode projects make the most
sense.
We base the decicion on whether or not the project depends
on QtGui and has app_bundles enabled. This prevents configure
tests and other tools from having Xcode projects, but allows
examples and demos to build out of the box.
Instead of setting the generator unconditionally we unset it in
default_pre so that we can detect if the user set it manually. This
means the user won't be able to inspect the MAKEFILE_GENERATOR variable
from the pro file, but this is less of a use-case then overriding the
generator from the command line or prooject file.
Change-Id: I881cf3e29631445f83ea4ff0979f7a566e4810f5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
And use configure's -sdk argument to choose between the iphoneos and the
iphonesimulator SDK. xcodebuild -showsdks can be used to list the
available SDKs. Passing an SDK without a version postfix implies
the latest version of the SDK.
Change-Id: I881df754d522fc91aaa16ba3e39cf0c37a21a1f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Introduce QT_OPENGL_ES_2_ANGLE_STATIC define for static builds
and modify export accordingly. Provided static instances
of gl::Current and egl::Current for Qt's single threaded
use.
Task-number: QTBUG-28196
Change-Id: Ia75699d6da103fb8dd9d5fe97c1ee51e48a74406
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Allows us to dynamically generate the command line option for iOS later,
and allows the user to override QMAKE_MACOSX_DEPLOYMENT_TARGET with the
expected effect on the command line options.
We unset PERL5LIB to ensure we get the system Perl libraries, since the
Mac OS 10.6 CI machine seems to have a broken XML::Parser::Expat from
macports/CPAN.
Change-Id: I04430c7b1daf9452d72f9a04a6b7f8d0d6926884
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of setting -isysroot in both arch.test, compile.test, the various
mkspecs, and sdk.prf, we now propgate the chosen SDK as the qmake
variable QMAKE_MAC_SDK, which is then handled exclusivly in sdk.prf.
The QMAKE_MAC_SDK variable, and -sdk argument to configure, is expected
to be of the short-form name, eg macosx or iphoneos, not a full path, as
that's what Xcode also expects. We take care of translating that into
a full path for -isysroot/-syslibroot in sdk.prf, using xcodebuild as
a helper.
Change-Id: I281655b2fa5180c6e78ffdce36824e4a91447570
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
all tests that happen after default_post loads resolve_config can rely
on debug vs. release, static vs. shared, and staticlib vs. dll being
properly "de-conflicted".
Change-Id: Ie0b4defcd6024bd1c25f53ba7e03621052d96492
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the current approach of having "free-flying" prf files for such a core
issue is rather insane. this was noticed early on, as evidenced by the
forcible loading of debug/release/debug_and_release in default_post.
however, things remained a mess, in particular static vs. shared.
consequently, the commit merges all related feature files. the actual
config resolution is put in a separate feature file, so it can be loaded
by resolve_target if that happens to be loaded early on.
Change-Id: Ie30e7c63cabe9409a3263ca1650e323a870926f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it differed from QMAKE_LIBS_OPENGL only for the irix/sco/unixware -cc
specs for not entirely obvious reasons. as all these specs are obsolete,
remove it.
Change-Id: I7d50ffa11ff830371ea52c9ebe25e1f1bc56b307
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is mightily little point in unsetting variables right before
unconditionally assigning to them.
Change-Id: I24c1814ce38bf9aab4496679b1a670f3cd55c536
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If Qt is configured with -libdir /some/dir/outside/the/install/prefix/,
then for use absolute paths for the executables and include dirs too.
Change-Id: I5ccf62be6f93f97d934df62038fe4cd40dca9a93
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
all non-installed tools are properly registered, so they don't need the
fallback. conversely, we can assume that non-registered tools are
already installed.
this enables us to build docs in qtbase after an incremental
build+install up to qttools.
Change-Id: I95a55f6b84e01885bcf6dd656caf0dd2b679bb73
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is the <prefix>/include directory which is independent of the
module and which only has to be used once. As everything uses QtCore,
it is enough to set it only there.
The CI system is a special case, in that it tests things before
installation. Handle that case too.
Change-Id: Idcdf9617e199b7d490cb3553cce07f1f464b3bec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As the Extras file can do things like append to a property (as in
QtCore for include directories), that is something that should be
done only once when the QtCore target is first defined.
Change-Id: I5163912bccfda1ff43a02eb01f67ac59e6f6b24b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the pkg-config file names follow the TARGET by default. as we create
frameworks without the major version infix, all references to Qt5* would
be invalid.
Task-number: QTBUG-29453
Change-Id: I82e7de017a8f17f7d2d7b4a2a61a180125ca29a0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's not used for anything other than display, so we can put a space
there.
Change-Id: I77e156856efeaaa964ff3bf2369bcd5586bac7c6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in duplicating the information in every module.
host_bins is exported only here as well.
Change-Id: I2f816e1cade9761a2c0d97c7ca1c90293095bfb1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
users need access to the Qt configuration, not some internals of
module's build system.
Change-Id: Ife3f668282969d444282d57152c11ed0f741076f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-rpath does *not* imply -rpath-link when x-building:
ld(1): "Searching -rpath in this way is only supported by native linkers
and cross linkers which have been configured with the --with-sysroot
option."
it doesn't hurt to have the "excess" -rpath-link for native builds, so
just remove the cleanup.
Change-Id: Ic39c1f4d6c2e3770d43a5ed3e56cf89a146edf85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
if the libraries are in a non-standard location, but no rpath is used,
rpath-link is needed. this is often the case for non-prefix builds
(which have no forwarding pris any more).
as we cannot store absolute paths in the final pris, we need to store the
module names, and resolve them only at use time.
Change-Id: I1538b5d531611c76a2d7058a3b2ff683bdcbe427
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as everything is built inside the common build/install dir, there is
no point in the fwd pri stuff.
as a "side effect", this makes it more straight-forward to relocate
non-prefix builds, which is the default on windows.
Task-number: QTBUG-28827
Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
move the regular pri file creation into the "sub-prf" and rename it
accordingly. the original reason for the split was the deep magic in
activeqt (and phonon), which is gone now.
Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-developer-build enables an actual build of examples, based on the
assumption that developers want to test it (it can be still disabled
with -nomake examples). regular users otoh want only the examples
sources installed.
Change-Id: Ifc6a108099929175a3960480802b271a758fdd38
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we need to collect the sources of the install targets for the check that
all files have been properly handled, but of course we must not add these
files to the source install target, as that would mean double installation.
Change-Id: I6acb56f2a993b6ed81d1031d5dc0a0da30a53b54
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Curiously, qmake could fix .prl and .pc files for unix, but only .pc
files for MinGW. qt_module.prf seems to have known this.
Task-number: QTBUG-28902
Change-Id: Ice9983a69813690c0d4b96ca11589440182569a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fully modular prefix build now puts the includes and libs into each
module's own builddir, so the else branch was simply bogus. Replaced
the else branch with the real base for modular builds. This allows
the paths to be successfully replaced when installing metafiles.
Change-Id: I056a923288965b560a4e9b0ba7add1aac912199f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise qmake will just take TARGET and lowercase and capitalize it,
which not only looks weird, but also does not match the Requires: fields
we generate.
Change-Id: I4a070ff256fffd2b780acb0361d4213d0032dbb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Dihan Wickremasuriya <nayomal@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
