- QObjects are always passed by pointer not by reference, by convention
- writeTable() takes QAIM rather than QATM to make testing via
QStandardItemModel possible in the future
Change-Id: I5bc6b8cd9709da4fb5d57d98fa22e0cb34360944
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This provides the ability to write live data from a table to Markdown,
which can be useful to load it into a text document or a wiki.
But so far QTextMarkdownWriter is still a private class, intended to be
used experimentally from QtQuick and perhaps later exposed in other ways.
Change-Id: I0de4673987e4172178604e49b5a024a05d4486ba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
The keyboard navigation with MovePageUp/Down and MoveEnd did not honor
disabled cells in all cases which lead to inconsistencies in the
navigation (esp. since MoveHome does honor them correctly).
Therefore make sure that all four move operations work consistent by
refactoring the code to use common functions.
Fixes: QTBUG-72400
Change-Id: I63fa3b626510d21c66f4f9b2b1bfb3261728ecaf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the first row(s) of a QTableView is hidden, PageUp could not reach
the first visible row because logicalRow(0) is taken without checking
if the row is visible.
Task-number: QTBUG-70215
Change-Id: Ic7820352b8988accb685ea7d16908d3fa8bf2847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
QHeaderView::resizeSection() did not check if the given section size is
inside the min/max property bounds.
Also on calling setMin/MaximumSectionSize() the current section sizes
were not checked if they are inside the new given bounds.
This is a small behavior change when a user is setting the section size
via resizeSection() without respecting the min/maxSectionSizes.
Task-number: QTBUG-64173
Change-Id: Ia9c9eebf058d60c776ab5f8f8336642013ec553f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use being()/end() instead.
These were the last remaining uses of QRegion::rects() within qtbase.
Change-Id: I264beb6f660968f40eecbbee2260341fca94ddb5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code sometimes made incorrect selections when rows or columns were
hidden or moved. It used logical top left and bottom right indexes to create a
selection rectangle. However on moved or hidden cells a wrong rectangle was
made. This fix calculates a simple rectangle without hidden cells and makes use
of the row/column select functionality provided by the selection model, to make
the right selection.
[ChangeLog][QtWidgets][QTableView] Fixed a selection bug when rows or columns were hidden (QTBUG-50171)
Task-number: QTBUG-50171
Change-Id: Id186012af26da7b2051ff5eb1c13e6b7494cca77
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The documentation says that we scroll one pixel, but changing the
behavior in 934f062203 to do that
was not well received.
People were relying on the undocumented behavior - and the new behavior
was considered to be a regression. (Nobody called setSingleStep since
Qt in many cases provide a reasonable singleStep - which implied that their
programs scrolled with 1 pixel which was quite slow). Furthermore getting
the old behavior (auto set of single step) was nearly impossible.
However the revert (done in 0e69230d02)
gets us back to QScrollbar::setSingleStep not working in pixel scroll mode
(even without it being documented - but we should also have a working API
rather than documenting that it is not working)
The previous approach was directly prevented Qt from changing
single step (on e.g resize) at all. This patch only prevents Qt from
changing when a user explicitly has called the function
QScrollBar::setSingleStep (in pixel scroll mode).
That is we expect that calls to setSingleStep means that the user actually
wants to set the singleStep and doesn't want Qt to control that value.
Furthermore it is possible to switch back to the automatically adjusted
singlestep with QScrollBar::setSingleStep(-1).
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
when scrollMode is set to scrollPerPixel, it is now possible to
change the single step. Qt will automatically adjust the single step
until setSingleStep is called. When setSingleStep is called it will
however respect the set and stop doing automatic changes of the value.
Calling setSingleStep(-1) will switch mode back to automatic adjust.
Task-number: QTBUG-7232
Change-Id: Ibfe0caa9751d3bcc11bfc6e0654a3d1ac35ac8ae
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The resizeColumnsToContents test would fail on some machines, as the
requested 40 pixels where to small to accommodate the header size hint
as well. Raising it to 60 pixels helps make the test pass.
Change-Id: I2a5026fd18425e236849a1cef25ba8d899c7ae5a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Storing the position of the first selected item in the view can lead to
wrong extended selections if the contents of the model change. Future
Shift-clicks will always use the previous position of the first selected
item, which may not be correct any more, to calculate the current
selection.
To fix this problem, a QPersistentModelIndex is used to keep track of
the first selected item.
A new unit test is added. Moreover, one function of the QTableView unit
test is changed such that it shows the view prior to performing the
test. Without this change, this test may fail. That the test, which
simulates mouse presses without showing the view, worked at all seems
to be a coincidence, as pointed out in QTBUG-18009.
Task-number: QTBUG-18009
Change-Id: I0d844fbd1a994c279a7c8ee5d9b5b9fccecd25bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The check for Qt::Key_A to handle selectAll was changed to directly
compare to QKeySequence::SelectAll as this will only match Ctrl. The
former implementation also triggered when e.g. Shift was pressed.
Added a check that selectAll is only called when selection is not
disabled, i.e. selectionMode=NoSelection.
Added a unit test for selectAll().
Task-number: QTBUG-26687
Change-Id: I721e7ab590b55d7d754b3b74ef01756fa5aa1315
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When navigating with the directional keys or tab/backtab, there are
certain situations where the cell that is edited is incorrect.
For example, consider the table below.
'^' represents the starting cell and the direction of navigation.
'c' represents the index that is arrived at as the currentIndex prior to this patch as
reported by view.selectionModel()->currentIndex().
'x' is the cell that should be edited:
+---+---+---+---+
| | | e | |
+---+---+---+---+
| | x | |
+---+ +---+
| | c | |
+---+---+---+---+
| | | ^ | |
+---+---+---+---+
Before this patch, the cell that will actually be edited is c, rather
than x, so after editing the cell and pressing enter, the previous
contents of the cell will still be shown.
With this patch, currentIndex() will be changed after every call to
cursorMove(). Navigation into and out of cells is not affected because
the visualCursor member in the QTableViewPrivate tracks the keyboard
navigation entry point. If after the up navigation into the span, the
user presses up, the cell entered is 'e', not the cell above 'x'.
Task-number: QTBUG-29239
[ChangeLog][QtWidgets][QTableView][QTableWidget] currentIndex() now
reflects the top left cell when in a span.
Change-Id: I3dc3db46ebba340102860fc4ad98fcaf91484983
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This reverts commit 934f062203.
The patch needs to be modified a bit. Many users considers
not having the old feature as a big regression.
The feature needs to be improved with a variable that is
only set when the user uses setSingleStep.
Task-number: QTBUG-33906
Change-Id: I35e5d3e9d3d7a3ebd01807b03a0e7a424185d483
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation says that we scroll one pixel
Quote:
"QAbstractItemView::ScrollPerPixel (value 1)"
"The view will scroll the contents one pixel at a time."
However until now Qt has tried to be smarter than the
documentation, but is actually getting in the way of the user,
where a manual set value to setSingleStep will continuingly
be overwritten (on e.g resize).
This patch ensures the behavior described in the documentation
for the vertical headers - and leaves the control to the user.
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
scrollbars will now by default only scroll 1 pixel when scrollMode
is set to scrollPerPixel. That is it will (when scrollMode is
scrollPerPixel) do what is stated in the documentation, and no
longer automatically adjust the scrollbars singleStep. The user
can now control that value.
Task-number: QTBUG-7232
Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
