This patch adds takeFirst and takeLast which are functions
that QList also has.
Change-Id: I761f90b529774edc8fa96e07c6fcf76226123b20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the functions removeFirst() and removeLast().
Functions that QList has.
Beside making these functions, pop_back and pop_front are
redirected to these rather than calling erase.
Change-Id: Ifc5f8a78e33f436f06f21095a920ec5d4311fd6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need to clip lines to the unclipped device rect in the case of
dashing, since otherwise the dashes will be shifted and rendered
differently when partial repaints are done.
Task-number: QTBUG-24762
Change-Id: I3599b54baa552acc20bf8cc2e12f846b45f6019e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Make sure the graphics view is exposed and has been painted before
trying to grab the framebuffer.
Task-number: QTBUG-29943
Change-Id: I2945cb78b58265864744a0d5fc99fb430306b578
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QKeySequence provides conversion to and from strings. But a similar
convenience was missing for QList<QKeySequence>. It would come in handy
when you want for instance to save/restore the shortcuts of a QAction.
Change-Id: I9e4f2001c58a595392a5019a57c564992c39bf88
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
I changed the existing test-case code to make it more scalable
in terms of adding more connectSlotsByName related tests. The
old "manual list of ints"-method was really not developer friendly.
This is a preparation for a subsequent modification of
connectSlotsByName behavior.
Change-Id: Ib760e52631ce4b5ae2a3ebdb4854849ff6c93bfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We cannot access children directly, since that won't ensure that
the pending sort is executed. However, the functions we need are
there already and actually makes the code nicer.
Task-number: QTBUG-29903
Change-Id: I6899284275dd79b991896a5f08486b58d95f819d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This provides a fast multiInsert in QMap (and a fast insert in
QMultiMap) when providing a correct hint.
Change-Id: I3c864c3a7842765fe63f8ecb4b54d0e8c9fd22d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a fast insert on QMap when providing a correct hint.
Change-Id: I256bba342932c1d4f24c6e65074e1bf47b519537
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QImage is supposed to maintain the invariant that each scan-line begins
on a 4-byte boundary, so we need to verify that this is the case before
using the optimized path of short-cutting QImage::copy() by referencing
the source image's bits directly.
Task-number: QTBUG-14766
Change-Id: I0a178aeb2f34cc64f98deae9470b55b5c53fcb06
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Send expose events on window and view show/hide
notifications. Implement QCocoaWindow::isExposed.
Close all windows on quit. This allows sending (de-)expose
events for those windows while the event loop is running.
Remove the flushWindowSystemEvents call in setVisible.
This function is called from application code. Flushing
window system events here is wrong since it can lead
to events being processed in the middle of the user
code call stack. flushWindowSystemEvents should only
be called as a result of (native) window system activity.
Skip one of the tst_qtooltip tests which becomes unstable/
fails in the CI system as a result of this change.
Task-number: QTBUG-29583
Change-Id: I3fb8b3f77e2b2e19dfeafba5d7dfcef602891d37
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QSharedMemory and QSystemSemaphore are not available on QNX so the autotests can not be built.
Change-Id: Ibfb405f951d21342d64bf215cedc203a8cefe070
Reviewed-by: Wolfgang Bremer <wbremer@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This avoids crashes accessing deleted memory when creating a QObject
after the last QObject had been deleted, like a qDebug() in global
destructors.
==41000== Invalid read of size 4
==41000== at 0x5F01ED5: bool QBasicAtomicOps<4>::ref<int>(int&) (qatomic_x86.h:208)
==41000== by 0x5F01309: QBasicAtomicInteger<int>::ref() (qbasicatomic.h:147)
==41000== by 0x5F24051: QThreadData::ref() (qthread.cpp:100)
==41000== by 0x614A984: QObject::QObject(QObject*) (qobject.cpp:681)
==41000== Address 0x6ee73f0 is 0 bytes inside a block of size 152 free'd
==41000== at 0x4A0736C: operator delete(void*) (vg_replace_malloc.c:480)
==41000== by 0x5F240BF: QThreadData::deref() (qthread.cpp:109)
==41000== by 0x6113F6B: QCoreApplicationData::~QCoreApplicationData() (qcoreapplication.cpp:268)
The comment right above the change in qthread.cpp looks eerily similar
to the problem I'm trying to fix. However, the actual change that
introduced the change is not in the Qt public history, so we can't
know for sure what the problem was then.
Change-Id: I0dba895b041fe6cf81e6f8939ca85035cd00aad1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add setProgram() and setArguments() methods to the QProcess api.
Add a convenient start(QIODevice::OpenMode) method.
Move the implementation of QProcess::start() to QProcess::open()
unifying the QProcess api with other QIODevice subclasses.
Change-Id: Id1af57da05f750fe8d526d391589c05ee8037bca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the Necessitas project by Bogdan Vatra.
Contributors to the Qt5 project:
BogDan Vatra <bogdan@kde.org>
Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hjk <hjk121@nokiamail.com>
Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Paul Olav Tvete <paul.tvete@digia.com>
Robin Burchell <robin+qt@viroteck.net>
Samuel Rødal <samuel.rodal@digia.com>
Yoann Lopes <yoann.lopes@digia.com>
The full history of the Qt5 port can be found in refs/old-heads/android,
SHA-1 249ca9ca2c7d876b91b31df9434dde47f9065d0d
Change-Id: Iff1a7b2dbb707c986f2639e65e39ed8f22430120
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Locking between processes, implemented with open(O_EXCL) on Unix
and CreateFile(CREATE_NEW) on Windows.
Supports detecting stale lock files and deleting them.
Advisory locking is used to prevent deletion of files that are still in use.
Change-Id: Id00ee2a4e77a29483d869037c7047c59cb909339
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change fixes a failure of tst_qwidget under XFCE (Ubuntu 13.04).
Change-Id: Ic63e85a97ac6e44ce8c281a80ef4e83feecd9185
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The QStyle implementations are becoming private, so the following
slightly verbose pattern seems to be now repeated a lot:
new QProxyStyle(QStyleFactory::create("windows"))
This change adds an alternative, more convenient constructor for
this particular use case:
new QProxyStyle("windows")
Change-Id: I97ded597a0fd3225a6354ebea0abb367237430af
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Both gcc and clang allow the use of '$' in their identifiers as an
extension. moc should not throw a parse error if there is one in the
file. Instead, consider '$' as valid in identifiers.
Task-number: QTBUG-22720
Change-Id: I8be3a52429c0db5b7e8308b8f4fe475d3d3994bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
If the object has only MEMBER properties, without any other property
specifying READ, the generated will fail to compile with this error:
tst_moc.moc: In member function ‘virtual int ClassWithOneMember::qt_metacall(QMetaObject::Call, int, void**)’:
tst_moc.moc:3810:42: error: ‘_v’ was not declared in this scope
That's because the '_v' is only declared if 'needTempVarForGet' is set,
and it should be set when we have a MEMBER property.
Change-Id: I829fad3faf69654b5a3fd540857df19f4a9449d4
Reviewed-by: Gerhard Gappmeier <gerhard.gappmeier@ascolab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Most notably, .com and .net now may contain non-ASCII characters.
list has been generated from
http://www.mozilla.org/projects/security/tld-idn-policy-list.html
Change-Id: Idc3191dc782bc4173ccb19b4bc81f4f061ca7999
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The problem was that the HolderBase destructor was getting called after
the contained type's constructor threw an exception, as is required by
RAII semantics (the base was fully initialized, so it had to be
destroyed). That was required because we want to return a non-null
pointer from operator() during destruction and return null after
destruction, to keep compatibility with Qt 4.
The solution is to only set the guard to Destroyed only if it is already
at value Initialized. This way, if the HolderBase destructor is run as
part of the stack unwinding, it knows that the construction did not
complete.
Change-Id: I9849b43ed7112bf9e70861b48a56a924c286617e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The motivation is to enable coloration the way KDE currently does.
It can now be achieved with a QT_MESSAGE_OUTPUT set to
"%{appname}(%{category}) \033[31m%{if-debug}\033[34m%{endif}%{function}\033[0m: %{message}"
I was thinking about supporting directly color using something like
%{begin-category-color} that would be smart and detect if we are running
on a terminal, but it would be less flexible in the way the colors van
be configured.
Changelog: QT_MESSAGE_OUTPUT can contain conditionals based on the type
of the message
Change-Id: Icd8de04734a94a3afcbf542a5b78b290a1914960
Reviewed-by: David Faure (KDE) <faure@kde.org>
- Wait for shown to ensure events are processed.
- Move away from screen corners/potential task bar areas.
Change-Id: I2c3aa9b675c6b33ca0da67ee99cc6f76c502098a
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This script was completely broken, and seems to have been abandoned.
Change-Id: If307f001237609ccb054c0a469213290294161c9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
For systems where the Unix signature checker isn't enabled (read: Mac
and Windows), QPluginLoader must actually load the plugin to query for
the metadata. On Mac it even tried to keep the library loaded to avoid
unloading and reloading again when the user calls load().
However, that plus the fact that it was calling load_sys() (on Mac)
meant that it would bypass the reference count checking. And on all
Unix, if a library-that-wasnt-a-plugin was already loaded by way of a
QLibrary, it would have an effect of unloading said library.
So remove the "caching" of the library. We should instead invest time to
write a proper Mach-O binary decoder.
Task-number: QTBUG-29776
Change-Id: Iebbddabe60047aafedeced21f26a170f59656757
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
QStandardItemModel doesn't really benefit from a reimplementation of
sibling, and the current implementation is buggy.
Task-number: 29540
Change-Id: Icf8dca29b6e1394a378db5bf6abd884f2d7fd9b9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes the compilation of the qfile autotest on qnx.
Change-Id: Iab099e8b754a4341152e338ff6e3d22a83c625e3
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Default-constructed geometry does not mean put the window at 0,0,
and it does not mean center the window on the screen: it means
let the window manager position the window. If the window is
explicitly positioned at 0,0 though, that is a higher priority
than the transient hint; without this change, the transientFor property
had no effect. On X11, transient means use center "gravity" to
make the transient window exactly centered. But the user can still
override the geometry of a transient window, as with any window.
On OSX and Windows, neither transient window functionality nor smart
initial positioning are provided, so a window with no position set
will be centered on the screen, and a transient window will be put
at the center of its transientParent.
Change-Id: I4f5e37480eef5d105e45ffd60362a57f13ec55f5
Task-number: QTBUG-26903
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Added the following functions to QStringRef: toShort, toUShort, toInt,
toUInt, toLong, toULong, toLongLong, toULongLong, toFloat, and toDouble.
These functions use the corresponding functions found in QLocale.
Updated tst_qstringref.cpp to exercise the new functionality.
Change-Id: I38668a0cc7da0c101a62613fd16cb5a98286617f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we're only including the Extras file one time, invoking set() for
the include dirs again will overwrite the addition of include dirs in
the extras file.
We only need to populate these variables if not set anyway, so do that.
Change-Id: I04dad0674778e79c8c12c18231b8ce6c92edf881
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When performing macro argument substitution, one should keep the set of
macro to exclude, else we can enter an infinite recursion.
Testcase:
#define M1(A) A
#define M2 M1(M2)
Task-number: QTBUG-29759
Change-Id: I564bbfed65e1c8599592eaf12c6d67285d2fd9ce
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This fixes QMetaType detection of const reference arguments in signals
while connecting using the new syntax and Qt::QueuedConnection
const references should have the same QMetaType as non references.
That means we need to remove the const reference while getting the
QMetaType.
Change-Id: I9b2688da7fb9ae985aec0d8fa62a1165357ffe71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The patch adds handling for a case when a QVector is shared between two
threads. In such scenario detaching in one thread could collide with
destruction in the other one, causing a memory leak or assert in debug
mode.
Task-number: QTBUG-29134
Change-Id: Idbff250d9cfc6cf83174954ea91dbf41f8ea4aa4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And update test to use the clang makespec now that it's the default.
Change-Id: Ifdd34c4220ad76f60b91fd6ef39d189f0f6525f9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add an encrypted signal to QNAM and QNetworkReply to allow applications
to perform additional checks on the certificate chain beyond those done
as part of the standard SSL validation. This allows things like
certificate change notification to be implemented for QNAM as they can
be for QSSLSocket currently.
Change-Id: I693e3e6fec8b7040379b7e7f1f819550e6b2617f
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Add intermediate certificates to our server sockets, and to our client
certs.
Change-Id: Ib5aa575473f9e84f337bebe35099506dd7d7e2ba
Task-Number: QTBUG-19825
Task-Number: QTBUG-13281
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Instead of storing a single QSslCertificate for a the local cert, store
a list of them. This will allow us to handle server sockets that use a
certificate that is not issued directly from the CA root in future.
Change-Id: I9a36b9a99daa9c0bdd17f61b4ce1a7da746f2e96
Reviewed-by: Peter Hartmann <phartmann@rim.com>
We also have to make sure that when moving back to a page
that has a focusWidget(), the focus should go to the focusWidget()
Task-number: QTBUG-18242
Change-Id: Ibfa7d6361c1a456480b2f1584a88ef4c4f405709
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Exhausting the symbol list while looking for the
final right parenthesis means it is missing.
Task-number: QTBUG-29308
Change-Id: Iccf5897b0f5eb719699fd12d6c8e4a16ff189d9b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The "mediumfile" is actually 9.6 MB large, and makes the test slow and
even fail on mobile platforms.
Change-Id: I694d9d38e4d09c8e90a03c1141320fe2a757fdd9
Reviewed-by: Richard J. Moore <rich@kde.org>
No users/file permissions. Open function in VxWorks DKM
requires always three parameters.
Change-Id: I93fb075d82aa57e210e224bfe4ede40def82c275
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Exhausting the symbol list while looking for the
final right parenthesis means it is missing.
Task-number: QTBUG-29308
Change-Id: Iccf5897b0f5eb719699fd12d6c8e4a16ff189d9b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Inherits QSurface and allows to use OpenGL from an arbitrary thread.
Platform plugins can implement QPlatformOffscreenSurface, otherwise an
invisible QWindow is used by QOffscreenSurface.
This patch includes an implementation of QOffscreenSurface for XCB
and EglFS platform plugins using pbuffers.
Change-Id: I57b4fc1db417331f34826dcfa754b7698782fde4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Qt5 requires Mac OS 10.6, so we can remove checks such as
if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
Change-Id: Iea21727a277291148704ecf9677ed0b68c24920f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's flakey and is blocking integration. Tracked in QTBUG-29730.
Change-Id: Ia5b8f952314bf2e1aa6dbb5c5c0a97e32e68d0f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
We now re-use QOpenGLExtensions/Functions from QtGui in the same way
as QtGui uses these classes. There is still some duplicated logic
in qglfunctions.cpp, but this code now at least uses the shared
QOpenGLExtensionMatcher class.
Change-Id: Ie04008c43d430ae805e6ec1c45e7e363deeb3b8f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Parsing for bound SQL parameters now handles identifier quoting using
double quotes (") and square brackets ([]).
The following has only 1 bound value but previously 2 were detected:
SELECT 1 AS "A?b[?']]]de?ghi", ?
Task-number: QTBUG-27159
Change-Id: Icfd02187e1126ff3b5ed11df8d4e599f574e61bf
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
As long as fonts weren't used we supported using QImage in combination
with QCoreApplication in 4.x, and there's no reason we can't continue
doing so.
Task-number: QTBUG-29643
Change-Id: I2cf351d3c93f1c175bbf624e45024d39ab913111
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The bug was caused by changes b371f3f943
and 3bb9024952, which removed the event
forwarding that QWidget::mouseDoubleClickEvent() used to do without
making sure to call ignore() on the event like
QWidget::mousePressEvent() does.
Task-number: QTBUG-29680
Change-Id: I98af8052ad3dd1dea15d07a710aa9212ef5e4a68
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This is possible with QWeakPointer, so allow it for migrating
code too.
In the process, replace the QPointerBase with a member variable for
simplicity. The functionality of the QPointerBase is replaced
by a TypeSelector template.
Change-Id: I3b4c77bdeda2b863cc33e84a3da8a25bae928c8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QPointerBase is not public or exported and it is to be removed
in Qt 5.1.
Change-Id: I060c6b2ebcde8dedde85dc21404fc393150d452c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
(?J) inside a pattern string can be used to allow or disallow duplicated
capturing group names in the pattern string itself.
Although PCRE supports duplicated names, in Qt we don't yet.
Change-Id: I21cd0c41273cd7ef42870ced3a0fad6ba7035cbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not include qsslsocket_p.h unless SSL is present.
Change-Id: I7e56b7758729907892d85f97d5a9d3ccaf7a3314
Reviewed-by: Peter Hartmann <phartmann@rim.com>
QPixmap::load() would not detach, so multiple paths could get associated
with the same QPixmap, causing the wrong pixmap to be shown.
Task-number: QTBUG-29639
Change-Id: I064dd6a9611b5996853bec9fb20b6224a0adcf62
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This finally makes it possible to make windows fullscreen etc from
QML by doing "visibility: Window.FullScreen". I don't see any reason
from not having the API at the QWindow-level instead of at the
QQuickWindow-level since this way it can benefit other use cases too.
Change-Id: If27344306eb563bc2ccd83296a46b1f2862e2db1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Currently, using QDate::maxJd() in tests will fail. This patch changes
some ints to qint64s to prevent overflows where necessary.
Change-Id: I61ebf8f233411a7544689fd5bfa9c3abee54e933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextCodec::codecForHtml currently fails to detect the charset for this
HTML:
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=9,chrome=1">
<title>Test</title>
</head>
This patch makes the detection of charsets more flexible, allowing for
the use of the HTML 5 charset attribute as well more terminator characters
("'", and ">").
I also added a *_data function for the unit tests.
Task-number: QTBUG-5451
Change-Id: I69fe4a04582f0d845cbbe9140a86a950fb7dc861
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
This commit adds SHA3 support to QCryptographicHash. Two implementations
are provided, one optimised for 32 bit and one for 64 bits. The code has
been written to make it easy to add further implementations, for example
ones using NEON instructions on ARM.
Change-Id: I3be9c45bbd4fcc2771d697e7f7ae74e48a831e8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The table is there to know which domains are allowed to set cookies
and which are not. There are more than 2000 new entries since the
list has last been generated.
The split to 64K chunks was made because this is the hard limit for
strings in Visual Studio.
Change-Id: I511aec062af673555e9a69442c055f75bdcd1606
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
revert() should operate in OnFieldChange edit strategy just as
submit() does. The reason in Qt 4 for excluding OnFieldChange
was that there was no opportunity to revert. The model was
refreshed, causing all changes to be lost. In Qt 5 a failed
edit remains in the cache until user action, which could be
to revert.
Change-Id: Ide021c4f83a53834b7ed81f2abfa3aa49317704d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This lets you write code like format.version() >= qMakePair(3, 2), and
format.setVersion(4, 2) instead of format.setMajorVersion(4);
format.setMinorVersion(2);
Change-Id: Ib052091cc12865ea0d5db52e468ed6cd28f14840
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
DER certificates should not be opened as text files, so we
only pass the QIODevice::Text flag when the format is
QSsl::Pem.
Change-Id: I4bad98023c397b967d5beeec0aaa6c414e06fd9c
Reviewed-by: Richard J. Moore <rich@kde.org>
The existing tst_qgetputenv shows that qputenv with an empty value
doesn't lead to the same result on Windows and on Unix, and there was
no way to fully delete an env var on Unix (which is needed for some
env vars where not-set and empty are different, such as TZ,
see `man tzset`).
This is also why qglobal has qEnvironmentVariableIsSet() vs
qEnvironmentVariableIsEmpty(), on the getter side.
Qt4's ifdefs around unsetenv in qapplication_x11.cpp show that this is
needed within Qt too (although this particular startup notification code
has to be re-imported into Qt5 still).
Change-Id: I631c8cddbcf933d4b9008f11aefc59f5a3c7c866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This improves performance since a network round trip can be avoided.
Change-Id: I1aaff7e48ef9638cb137de0f43942c3a4dd2884a
Initial-patch-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If the high bit in a mask is set, for instance if the mask is
0xff000000, and we shift it to the right by 24 positions, since the mask
was not declared as unsigned we ended up with a mask value of
0xffffffff. We then add 1 to this value and divide by the result,
causing a division by zero crash.
The masks need to be declared unsigned to prevent sign bit extension
when shifting right.
Task-number: QTBUG-29194
Change-Id: I79260344cebfbdd3ea86416a9c734dca76517999
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Previously, selectRow() did not work after INSERTing a new row into a
table with an automatically populated column. It did not work because
the model did not know the primary values for the new row. Newly
inserted rows were therefore not refreshed in OnFieldChange and
OnRowChange edit strategies.
This change provides support for the typical simple case where a single
column is populated by the database and can be retrieved with
QSqlQuery::lastInsertId().
Task-Number: QTBUG-29102
Change-Id: Ibf0f0ac8661185bde57034ddf40c2178bece4778
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Lukas Geyer <lgeyer@gmx.at>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 10ff9de91b introduced the
optimization of ignoring non-changes, but it overshot the mark.
It neglected to consider that QVariant's equality operator does not
compare the null flag. It also failed to consider that setData() has
a useful side effect of setting the generated flag in a column of a
pending INSERT. This is important when the application actually wants
a NULL to be inserted into the column.
Task-number: QTBUG-29217
Change-Id: I1368f7acc21eebfeb5a8d23746fc38f6f30fd395
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
QSqlQueryModel::headerData() relied on virtual indexInQuery() to
detect whether the requested column at row 0 mapped to an index in
the query. This failed when row 0 was a pending insert managed by
QSqlTableModel, and therefore not in the query.
The only thing that matters here is the column.
Task-number: QTBUG-29108
Change-Id: I3e0ae85ba223e444781ec8033386d394bb44f0e8
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
It may be useful to know which named capturing groups are defined
in an regular expression, and for each of them, what's the
corresponding index. This commit adds the needed method
to QRegularExpression.
Note that extracting the information doesn't happen while holding
the mutex in the private -- pcre_fullinfo just reads information
from the compiled pattern, so that's thread-safe.
Task-number: QTBUG-29079
Change-Id: I50c00ee860f06427c2e6ea10417d5c0733cc8303
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just like other functions this function should emit expanded and
collapsed.
A part of fixing
Task-number: QTBUG-8176
Change-Id: I6d801f61e6f0cb8836634cc52f0be2b610f6c728
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove srcify() function, which was warned about as unused
on Windows.
Change-Id: I731d3b6f058d4246e39dcf9a137619ae5087d751
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When we call call collapase we emit collapsed. Therefore it should
also be emitted on collapseAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: I20c1388fcbbb60d12debb4a0b3b0d9fed41e2563
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we call QTreeView::expand expanded is emitted.
For the same reason we should emit expanded on expandAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: Ie85e724eec50980c68f626ec47dec5c1e08cc085
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Revert to the pre highdpi-patch behaviour.
Before, both physical and logical DPI would be based
on the dpmx/dpmy variables, which could be changed
with setDotsPerMeter(). The highdpi patch introduced
separate ldpmx/ldpmy variables, which were not
changed by setDotsPerMeter().
This broke when loading images: setDotsPerMeter
would be called but the logical dpi would not change.
Remove ldpmx/ldpmy. Keep scaling the physical dpi
by the devicePixelRatio, which will be set to 1 by
default.
Task-number: QTBUG-29187
Change-Id: I0d6f5f3b8efae5fb1adc0a50b22a5da78324a282
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If a sourceModel resets, it's roleNames might have changed. This
is most likely the case if sourceModel itself is also a proxy model
of which the sourceModel was changed.
Task-number: QTBUG-28982
Change-Id: I102788f2c9bf97b4002b350673f9219e32e7a052
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
type is unsigned long, should be %lu. Replace by stream.
Change-Id: Ib0346b54a4494910b4a5927d0de45840ca53fbda
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
This was part of Qt 4.8, but Qt 5.0 was branched before that, so
the commit was lost.
Change-Id: I2a2ab3c75a0943ac734d588ebd74bc158dd6aaaf
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QtTestLib and QTestLib don't exist. The proper name is "QtTest" (code)
or "Qt Test" (English)
http://qt-project.org/wiki/Spelling_Module_Names_in_Qt_Documentationhttp://lists.qt-project.org/pipermail/interest/2012-December/005221.html
Files paths in qttestlib.qdocconf can't be changed easily however, as it
breaks things. So, they're left as they are.
Change-Id: Ifbc44ea858c453bedad8cd7723f847e67fc7a85a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
It can be used to determine whether expand() should really expand.
Change-Id: If79d8c295a4ca1356e60051682b227524a065126
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
It may interfere with other file system tests.
Task-number: QTBUG-29014
Change-Id: I32dd7428993b0da1a2f70ec3e581050012a4ff32
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is to ensure that the compiler won't optimise it out of existence.
Clang says it will do it:
testProcessCrash/main.cpp:50:5: warning: indirection of non-volatile null pointer will be deleted, not trap [-Wnull-dereference]
*(char*)0 = 0;
^~~~~~~~~
Change-Id: Iac7771046442f869e205e8789fffdd6443d58e67
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
These tests were added to Qt 4 on commit
a17fc85b51a6bdcfa33dcff183d2b7efd667fb92
Task-number: QTBUG-28985
Change-Id: I3cf595384f14272197dcfb85943213c8f8ddeba0
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Add function to move back data to the stack.
Change-Id: Ic78a368459bce68629e29602e4eeae2e1afe398b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I66c4e274c8b686d8a69476ad10751008f256e5a2
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VxWorks does not have QProcess support.
Change-Id: I917b769f967e9d71ec5025aae788f3e237b07aeb
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
(cherry picked from commit 416e73a0fc)
Use the test's temporary directory instead of
QDir::temp() and the documents folder
instead of QDir::home(). Split out unrelated test
from data-driven sort test.
Task-number: QTBUG-29014
Change-Id: I229f0b1c0f1e43b56d19ebd43fd7cc64a85b1222
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A itemview item with its flags set to Qt::NoItemFlags is considered
disabled, and therefore should not cause the activated signal
to be emitted.
Task-number: QTBUG-20490
Change-Id: If824505c46f4fcadb9265ad6d1e9337f0cee32cf
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The writer delegate used by QJsonDocument to produce a Json QByteArray
supports generating a human readable Json (with spaces and carriage
returns that reflect the Json structure) and a less human readable (no
spaces nor carriage returns) but more compact Json.
The method toJson() was extended with a format argument to support
the compact Json generation.
Task-number: QTBUG-28815
Change-Id: I8d13849ab9ab6ed7c645011260251dc14a8629d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Debao Zhang <hello@debao.me>
A QWidget that can embed a QWindow. This can be used
to embed a QWindow/QOpenGLContext based window or a
full QQuickView.
Change-Id: I8415b5ae38562fc00b46150fa70b56fd9b19a80c
Reviewed-by: Jørgen Lind <jorgen.lind@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add more testing.
This uncovers that currently the QDesktopScreenWidget
shows up as child of the app. Fixed by not creating
QAccessibleInterfaces for QDesktopScreenWidget.
Also don't crash in indexOfChild when called with 0.
Change-Id: I9fb1e47e8f1f33189e6125f56f274a7b94ecd0dd
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Return value of the QFile::decodeName(qgetenv("HOME")); is never null
if HOME environment variable is not set. So need to check the return
value using isEmpty() instead.
Task-number: QTBUG-28912
Change-Id: Ic57b1978d63e99b056cde35ca8cb9d2a07ff8ce8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Change-Id: I96b6e96539a84a5919992afbaee757fa080b7ae0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When simulating hight load, this test failed 4 times out of 80 runs
on my machine.
With this patch I could no longer reproduce the failure.
Change-Id: I42748de0200b9094c8facf0e33f3794002ec1d01
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
A glitch in QGraphicsItem's logic made it update the focusScopeItem
pointer, but fail to notify the change to QDeclarativeItem through the
d_ptr->focusScopeItemChange() virtual function, hindering
QDeclarativeItem from emitting focusChanged() correctly for focus
scopes that do not have focus.
Two lines were moved, and a comment updated to reflect the reason
why the "return" is needed at this point. It's clear that the
calls to focusScopeItemChange() are unrelated to the return.
Task-number: QTBUG-29260
Change-Id: I12ba9161b16d34c3689401a92c86d2047989f7bd
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Alan Alpert <aalpert@rim.com>
make sure we keep track of when we can load root certs and when we
cannot (we cannot when the developer set the certs explicitly). This is
implemented the same way for QSslSocket already, and needs to be
duplicated because we have 2 methods for setting CA certificates: one in
QSslSocket and one in QSslConfiguration.
In addition, adapt the auto test which checks whether setting a default
QSslConfiguration works: There is no way to set on demand loading
through the API, so it should be enabled by default.
Task-number: QTBUG-29103
Change-Id: I5146128aaa385dfcc0ad1e0ef81a92d9350ec5f2
Reviewed-by: Richard J. Moore <rich@kde.org>
Introduces the methods QImageReader::supportedMimeTypes and
QImageWriter::supportedMimeTypes which corresponds to the similar
supportedImageFormats methods, except they return lists of MIME types.
Task-number: QTBUG-28177
Change-Id: Ibb0e264a12eaf972a8bfd6bd891dcd9f89efd085
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The test is compiled since QT_UNICODE_LITERAL is always defined
on Windows and ref.isStatic()) then fails since C++ 11 is not
enabled.
Task-number: QTBUG-29014
Change-Id: I357574a493c5191f1463e7ee5851d7db0e569315
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Keeping accessibility and only disabling the bridge will
enable more builds to work.
Warning about disabling accessibility disabled is needed
because in QStyle it is used to discover semantics about widgets
(if a toolbutton is in a toolbar).
Change-Id: Iae4e6ab63479743bdd70cba4b1954ec7cf3f88e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The new member variable activeChildren shall contain the number of
direct children that are active. This number differs from
children.count() because the vector may contain empty entries that
haven't been garbage-collected yet (obj == NULL and activeChildren ==
0).
When this count drops to zero, we know we can simply erase the vector of
children.
Change-Id: Ia20604d3fac852ea4a6e8862d934fbb936fa5e18
Reviewed-by: David Faure (KDE) <faure@kde.org>
Unlike the previous implementation, this implementation is locked:
only one initialisation is ever run at the same time. It is
exception-safe, meaning that a throwing constructor will restart the
process.
Also, start using the thread-safe behaviour that GCC has offered for a
long time and C++11 requires.
Change-Id: I20db44f57d258923df64c0051358fd0d9a5ccd51
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Fix float format and exclude crashing sub-binary.
Task-number: QTBUG-29014
Change-Id: I404f971edeb128263122a194f23e2806d6fd3bd0
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Only QStringList was handled before, now any QList is handled.
A specialization for QStringList is still needed though, due to the way
template matching works.
Example with QList<int>. Before:
FAIL! : tst_QTextCodec::threadSafety() Compared values are not the same
Loc: [../tst_qtextcodec.cpp(2057)]
After:
FAIL! : tst_QTextCodec::threadSafety() Compared lists differ at index 0.
Actual (res2.toList()): '0'
Expected (mibList): '3'
Loc: [../tst_qtextcodec.cpp(2057)]
Change-Id: If0fdec3236ddb78a679ee549aba569ef5571c395
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
There is an assumption that the interface returned from iface->parent()
would have iface as one of its children (thus,
parent->indexOfChild(iface)
should always return an integer != -1, indicating that it is a child.
This is a good assumption, otherwise an hierarchy would be presented
differently depending on how it is traversed.
However, a QMenu created like this:
QMenu *menu = new QMenu("weird parent", mainWindow);
mainWindow->menuBar()->addMenu(menu);
will have a different ancestor sequence than a menu created like this:
mainWindow->menuBar()->addMenu("ok parent");
This is because it will walk up the QObject hierarchy.
This patch tries to deal with that by looking at which widgets the
action of the menu is associated with before determining which should
be the accessible parent.
Change-Id: I00dad8a94463f772d7b1f5d66fdb36b2e8d3aea2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This tests the fix submitted in bb5e11b56d
Task-number: QTBUG-28611
Change-Id: I7b15aa6b46be3607bd7079294d8e7d18bd507d1c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Introduce variables for the paths used in the test and
check in initTestCase().
Change-Id: Ie801266e30cd860e5bdf079c1182fe385f9598c7
Reviewed-by: David Faure (KDE) <faure@kde.org>
This associates properties with member variables and
avoids writing getter and setter methods manually.
The metaCall() method directly accesses the member variable,
so additional method calls can be avoided.
The metaCall() setter code also supports NOTIFY signals,
which means the according signal is emitted when the property
gets written.
Task-number: QTBUG-16852
Change-Id: I88a1f237ea53a1e9cf65fc9ef2e207718eb8b6c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Qt 4.8 shows frequent crashes in runMultiple apparently caused
by the QMutex construction in the free functions by different
threads. Use a common QMutex class member instead.
Change-Id: I851d4e2d3637a7b4f404ed843f5360c10caa21f5
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is intended to make it easier to understand what's happening when
this test is flaky during CI.
Change-Id: I13163c244cb99414d90b5f71c365a4ff2216bc83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So that the QTemporaryDir can happen even on error.
Change-Id: I728d49eac8bd65e1919fd314a95387949e134de0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This QIODevice uses a temporary file for writing, so that in case of
write errors, the writing operation is canceled, without losing any
existing file. It also avoids having a partially-written file visible
by other processes, at the final destination.
Change-Id: I9482df45751cb890b1b6f1382ec2eea3eb980627
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by trying more often to get dates close enough to each other.
Change-Id: I370f7cd61bbb84fbb77ea96ff9fd82c1a6f1f76a
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This currently fails on case-insensitive file
systems since the check for existence then triggered
and indicated "file already exists".
Check on the file id (inode or file id) whether
the target file is really a different file for a
case-changing rename.
Task-number: QTBUG-3570
Change-Id: I1b2d40850692e02142ee23d2c753428de00aedc6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Release the table item below the table test instead of releasing
the text item twice.
Change-Id: I74d283d50a39b9a4570b73a8297ed3dbb2de2271
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This is necessary for initializing things in a library, which require
a QCoreApplication instance (unlike Q_CONSTRUCTOR_FUNCTION, which runs
before that). Example use cases: KCrash (segv handler), and KCheckAccelerators
(debugging tool triggered by magic key combination).
Change-Id: I5f4c4699dd4d21aea72b007989ba57467e86ed10
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drop the read and write permissions for group and other users in the
system.
Change-Id: I8fc753f09126651af3fb82df3049050f0b14e876
Reviewed-by: Richard J. Moore <rich@kde.org>
This is a very common thing to do, e.g. in order to send urls via DBus.
Change-Id: I277902460ee1ad6780446e862e86b3c2eb8c5315
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to move QTextStreamPrivate to a private header, to be able to use
its new internal Params struct from qdebug.cpp
Change-Id: If28e25f27bbd04b1825a5eb3e2ef83ecad72e7b2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMessageAuthenticationCode is HMAC implementation based on
QCryptographicHash abilities. HMAC is often used in OAuth and similar
authentication protocols.
Change-Id: Ifc73947ad06c36a1b770315b7e89ba5c01c5e79e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusReply allows one to extract a QVariant and the type reply from an
error reply and getting a default-constructed value. This is useful when
a valid reply can never contain the default-constructed value (0, false,
empty strings, empty arrays, etc.), so it simplifies error checking.
More importantly, qdbusxml2cpp was changed a while ago from generating
QDBusReply to generating QDBusPendingReply, so we need to have the same
behavior.
Task-number: QTBUG-29046
Change-Id: Ia873b9fd4311c0d4e94f0ef623ba405c20bc0e8c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This test runs fine almost all of the time on systems with 1
processor, which were the norm when the test was written and are still
the way that the Qt Continuous Integration system works as of
today. But it falls flatly on multi-processor systems.
The root of the problem is that QSystemSemaphore recreates the
semaphore if it disappears underneath it. However, the recreation
process is not thread-safe at all: if two threads race to recreate it,
weird things might happen. strace on Linux shows that a thread got
stuck trying to acquire the semaphore:
<... nanosleep resumed> NULL) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
semget(0x51001388, 1, IPC_CREAT|IPC_EXCL|0600) = -1 EEXIST (File exists)
semget(0x51001388, 1, IPC_CREAT|0600) = 114786308
semop(114786308, {{0, -1, SEM_UNDO}}, 1 <unfinished ...>
This problem does not happen if the creation and destruction of the
QSharedMemory (which uses QSystemSemaphore) does not race with other
threads or processes attaching and detaching. For the threads test
it's easy. For the processes, we use stdin and stdout as a
communication channel.
Change-Id: Ie11b135431d4abfc59234654848b67f622eb03c9
Reviewed-by: Richard J. Moore <rich@kde.org>
This convenience overload allows one to write
QRegularExpression re1, re2, ...;
QRegularExpressionMatch match;
QString subject;
if (subject.contains(re1, &match)) {
// ...
} else if (subject.contains(re2, &match)) {
// ...
} // ..
One can then inspect the results of a successful match in each block
(as well as extracting the captured substrings, etc.).
Change-Id: I0fb8be8b577656e8db994198f8105c26c4fe67b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to put them in containers, and to enable subsequent
features for QString.
Change-Id: I3b3fe695ffe6930331ed9f670738376722e0fc36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented QAccessibleActionInterface in QAccessibleTableCell to allow
selecting and unselecting table cells, as there was no way of selecting
or deselecting a simple cell using accessible tools.
tst_qaccessibility.cpp was modified to test the new methods.
Change-Id: I7bdfe0b363a9813d4a7c62e96b6c924b163f2121
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This is done to support texture uploads in an image provider. It ensures
we can load the texture using QImage in the image provider, and when
it is later painted as a pixmap, the cacheKey will be identical
(assuming no format conversion was required).
Change-Id: I54229511ed91ce5430cc478af5aff0d96685a2da
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
One of the IPv6 autotests was always disabled instead of being disabled
only when the system has no IPv6 support.
Change-Id: I34dffbeae6ba85a706bfeb0cc4750a4514b73a65
Reviewed-by: Peter Hartmann <phartmann@rim.com>
The test for a magic reason was not build by default.
Change-Id: I21c7fc959d76d6faac0091495f965f3da6d415b1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
'timex' is not a Qt class, so there is no need to check it.
Change-Id: Ic77b3518e5a7eaf2c2bc7dcd98d1f9aebf4b655d
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Instead of testing the "windows" and "motif" styles, that test should
actually test the scrollBarRanges for all available styles. To be able
to do that, the magic numbers 16 (width/height of scrollbars) and 4
(spacing for the faux motif style) were replaced and instead of setting
the explicit values in the data the "number of scrollbars/spacings to
add/remove" is saved in a struct and the value of these (depending
on the style) is obtained in the test run.
This change does not also cause the fusion style to also be tested but
also fixes this test for Windows 7 and 8 (Aero) where the scrollbar
width/height is not 16 but 17.
Task-number: QTBUG-28611
Task-number: QTBUG-29002
Change-Id: I5d103018fde81cee6e6e89cd414426768b2dc8e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Adds an auto test that verifies that the replies to POST and PUT
requests are not cached even though they contain a max-age header and
that subsequent GET requests are reloaded from the server.
Change-Id: I188ae1200cb5551e164722c0f479719be8d11bfb
Reviewed-by: Peter Hartmann <phartmann@rim.com>
This match type doesn't do any match at all; it's only necessary to
properly introduce default constructors for QRegularExpressionMatch
and QRegularExpressionMatchIterator (since they return the match type
that created them).
Change-Id: Ibfe92459c7fdd23129cf3afe073cd443c461ddeb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Provide addition/subtraction for QMargins as well as
multiplication and division for int/qreal similar
to QPoint. Add unary minus.
Change-Id: If4eb831cfd610b34b5ca361619b1636031811d0a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
- Addition of a QMargin to a QRect.
- Removal of a QMargin from a QRect.
- Remove implementation from Windows platform plugin.
Change-Id: Iae54bc13e94a7ece48853b1d3f3de2bfc154d2dd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Check that the regular expression, the match type and the match options
returned by QRegularExpression/QRegularExpressionIterator are the
same ones passed to match / globalMatch.
Change-Id: Ibd282379bb60b53d614b1d56a7e08b3d6c236da6
Reviewed-by: Jason McDonald <macadder1@gmail.com>
QRegularExpression counterpart for QRegExpValidator.
Change-Id: Ib391e73dd49e32aeb9b48e6f2217b67a17a83a11
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
- Add initial set of amd64 data
- Add QtWidgets to global.cfg
Task-number: QTQAINFRA-321
Change-Id: I9bffaa00ac01976546629988ac69965383eb2efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add additional tests for the updates in the Qt4.8 qlocale data (CLDRv2.0) already existing in Qt5 locale data (CLDRv22.1):
- The NumberingSystem for some Indic and Slovak locales.
- The Month/Day name in Irish/Gaelic locale.
- The AM/PM Text in Turkish locale.
Change-Id: Iaea4f13ec79f94ab937b97f8ae60eb8d8f217c4b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ibe8e2ec867afb4051a3c7eef806d9cd86945928b
Reviewed-by: David Faure <david.faure@kdab.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I95b8b4b674e85b2b3c374931f6231d60f35be984
Reviewed-by: David Faure <david.faure@kdab.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I54523eb854619917123d8816d3cd6c3a1f5b4c55
Reviewed-by: David Faure <david.faure@kdab.com>
If the dynamic_cast failed in QSharedPointer::dynamicCast or
qSharedPointerDynamicCast, we should avoid creating the QSharedPointer
that shares the weak and strong reference counts. In Qt 5, this does
not imply a leak since the original pointer is stored internally for
deletion. In Qt 4 it implies a leak under certain circumstances, which
this change fixes.
Task-number: QTBUG-28924
Change-Id: Id2de140de4cf676461e14b201ad250c53666b79d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Those certificates have erroneously set the CA attribute to true,
meaning everybody in possesion of their keys can issue certificates on
their own.
Task-number: QTBUG-28937
Change-Id: Iff351e590ad3e6ab802e6fa1d65a9a9a9f7683de
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
We make it pass by relaxing the comparison of the characterRect....
Change-Id: I900e0601d9e1e568c12a3952cf42657743345013
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
In some cases, the type is required to be registered with the typedef
name, so those Q_DECLARE_METATYPE uses remain for now. In a future
patch we can also remove those and the typedefs themselves.
Change-Id: I5721955c86f566ae09024203954840f817bd3088
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Previous commit b2363a935c fixed keyboardModifiers() after QPA event
processing, but broke QTestLib, which expects spontaneous input events
sent to qApp->notify() to update keyboardModifiers() and mouseButtons().
The commit also did not fix mouseButtons() after QPA event processing,
and missed keyboardModifiers() after QPA Tablet event processing.
This commit fixes all these shortcommings in b2363a935c.
Includes test case by David Faure <faure@kde.org>
Task-Number: QTBUG-26887
Change-Id: I8518b06c4ce86ea7b35120e3353a45ea2a81d356
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifdce72af844901665c4ebab11507216ba5f00fc1
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
With trailing spaces in some cases, we would not get the
"no justification at end of paragraph" special case, and continue
in the code, getting the unexpected case where line_length becomes
< 0 which would lead to memory corruption because we were writing
outside our buffers. I added an assert to catch this type of bug
earlier, and I added the trailing spaces to the test for the end
of the paragraph.
The test case added is one example which would crash.
Task-number: QTBUG-27354
Change-Id: Id720a6fa55dbc709ce04dd5321e55687bf960d75
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
trolltech.com seems to be shut down already
Change-Id: Ic90ce01aeb51b6f154b9bbf4762c365a398c9e3d
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patch allows single selection to be cleared with the normal
control modifier. This affects e.g QTreeView and QListView.
Task-number: QTBUG-8836
Change-Id: I7fd50b987acc3552b36657409568192763257536
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Going through QLocale and QString is not really needed.
This also makes the result of the conversion of negative numbers
in bases other than 10 independent of the architecture and
implements the documented behavior of treating them as
unsigned types.
Change-Id: Ibc231dc5241deb5cbadd9796484a8b5f79c29410
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The Linux futex implementation had a Q_ASSERT for positive values, but
the documentation says that negative values should be interpreted as
infinite (equal to lock()).
Test that too.
Change-Id: I2f96a502d672732781e88e49797756ca9a809121
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Requires C++11 rvalue references and variadic templates so we can
implement perfect forwarding.
Change-Id: I62e47d1ffd0c61e8386f9f246aa79031b7430b46
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUrl::fromUserInput("http://") was invalid, which doesn't make sense
since QUrl("http://") is valid. Same for "smb:" which is actually
even more a valid URL from a user's point of view.
Change-Id: I371ac393d61b49499edf5adbbc2a90b426fe9e5d
Reviewed-by: Marco Martin <mart@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some things needed to be corrected for testing with PSQL, this was
checked against the the PostgreSQL documentation to confirm that the
exepected behaviour is correct.
Change-Id: I45a6b343e9eb920fcae2a62910ecc956abcac0f0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
These cases weren't handled before.
The validateComponent function is copied from QUrlPrivate::parse, with
the added modification that it now needs to check the gen-delims for
the userinfo.
Change-Id: I055167b977199fa86b56a3a7259a7445585129c6
Reviewed-by: David Faure (KDE) <faure@kde.org>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...and remove the outdated QUnicodeTables::Script enum.
QFontEngineData now has one extra slot that never used
(engines[QChar::Script_Inherited]). engines[QChar::Script_Unknown],
if accessed, would be set with a Box engine instance, and could be used
as a minor optimization some time later.
In order to preserve the existing behavior, we map all scripts up to Latin to Common.
Change-Id: Ide4182a0f8447b4bf25713ecc3fe8097b8fed040
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Use QWidget::isVisibleTo(parent) instead of isVisible(), just like
QAbstractScrollArea::replaceScrollBar() does. This removes the need
of using QCoreApplication::processEvents() to deliver the actual
hide event just for testing if the scrollbar was requested to be
hidden as it should.
Change-Id: Ie9a816e7b871d280a4b3d9d76adb10601915bd56
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
As recommended by Giuseppe, don't rely on the env var, but use the
internal but exported seed atomic int. This way, the compiler will
detect breakages, rather than runtime.
Change-Id: Iec2bc88c53532d3463d2dc5c73631fc9bc34747b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A pointer to the data of one qimage is used, with an offset, in a copy.
In the mono case, that could lead to overflow: the last row would
of the copy would stretch 1 byte beyond the end of the allocated
area. Fix by reducing the height of the copy, so that it keeps
within the allocated memory.
Task-number: QTBUG-28322
Change-Id: I09abfc83f738f8af000fc50f8c94f63dba3a6cfe
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
... with respect to empty and null strings.
Change-Id: Ic107d5bcc8b659497a567b75a7244caceba5a715
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...where the values are not aliased to Common script.
The old QUnicodeTables::Script enum was retained for compatibility reasons
until Qt internals are updated to use QChar::script().
Using QChar::Script instead of QUnicodeTables::Script would improve both
the text analysis (itemization, boundary finding) and the text shaping quality.
This also a required step for switching to Hurfbuzz-NG.
/* This adds 6668 more .rodata bytes */
Change-Id: I5aa3d12c550528d0052542436990f8d0779ea8e5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Make windows frameless so that size constraints for
decorated windows do not interfere.
Task-number: QTBUG-28696
Change-Id: Ic4410d8a6e8166bdfe013ed2362173f8e02d4b29
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
According to the comments of selectRow and selectColumn, the expected
behaviour of this method was to select a row or a column and unselect
any cell that were previously selected. However the actual behavior
was to select only one cell and not deselect any cell.
Moreover, according to the specification there's no simple way of
selecting multiple rows or columns as when one of the methods is
called for selecting one row or column the others should be
unselected.
The specification was changed not to require the rest of the cells
to be deselected, although they might be deselected if the
selectionMode requires that in order for the new row/column to be
selected.
The implementation of these methods was changed in QAccessibleTable
and QAccessibleTree to select the whole row/column and take into
acount selectionMode and selectionBehavior.
tst_qaccessibility.cpp was modified to test the new behaviour of
the methods.
Change-Id: I29635d014792169302435e81704e02c16f951238
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Increase tolerance on Windows for the Aero style.
Set small top level widgets frameless to avoid warnings
about minimum size of decorated windows on Windows.
Task-number: QTBUG-28611
Change-Id: Ia4aec0cf0763da9955577054cb8cf81337fac134
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Avoid failures caused by minimum window widths on Windows Areo/8.
Task-number: QTBUG-28611
Change-Id: I9affcce84ab804a45fa1a12fb93ad0136e6ae877
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When disconnect()ing through a QMetaObject::Connection, if the
QObjectPrivate::Connection contains a slot object, deref it, so
that it will be destroyed before the next run of cleanConnectionList.
Previously, a copy of the functor passed to connect() was kept until
QObjectPrivate::cleanConnectionLists was called (by adding a new signal,
or the sender was destroyed), even after a successful call to
disconnect(). That is, we were keeping that copy allocated without
any good reason.
Change-Id: Ie6074ea797df1611cb995dec07c5b5a742360833
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The QObjectPrivate::Connection refcount was not decreased
when disconnect()ing, therefore it was kept alive by the
owning QMetaObject::Connection object.
This removes a leak in case the QMetaObject::Connection
survives the sender object, after a successful disconnect().
Change-Id: Ie2ea59b269a0e589ae23c1457df7533be77c0797
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
More QVERIFY()s were added in the meanwhile to the test function,
so we can drop this one.
Change-Id: If6f137f45ba606b61d6a7004556a667ed316b61f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QGraphicsItem::setActive() is by design not guarded against calls that
do not change the current activation state of the item (e.g., calling
setActive(true) on an active item or calling setActive(false) on an
inactive item). This is to ensure that it's possible to set explicit
activation state on items, either before they are added to a scene, or
while the scene itself is inactive.
Before this fix, calling setActive(false) on a panel item that is not
currently active would by accident clear activation from any other
panel that might have focus. After this fix, activation is only cleared
if the item setActive() was called on itself is the active panel, or
is the panel that will regain activation once the scene is reactivated.
Task-number: QTBUG-28544
Change-Id: Ic4752f1e4400f9a0660bc968834747610212bb52
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
This signal is emitted by QGraphicsScene whenever focus changes in the
scene (i.e., when an item gains or loses input focus, or when focus
passes from one item to another). You can connect to this signal if you
need to keep track of when other items gain input focus. It is
particularily useful for implementing virtual keyboards, input methods,
and cursor items.
Task-number: QTBUG-10570
Change-Id: I9cbbd9a2d15d6f568e1597c2c33ec049eb70f793
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Makes tst_qgraphicsitem::tst_focusProxyDeletion not crash.
valgrind reported the error when running tst_qgraphicsitem. The crash
was very real; when deleting an item that has another item as a focus
proxy, the proxy still had a reference to the deleted item's focusProxy
pointer. I'm not a huge fan of whitebox testing but thought this crash
justifies a modification of the test to make it fail, instead of just
passing silently with a warning only given by valgrind and friends.
FTR the reason the test doesn't crash hard is that the memory is freed
but not reused within the scope of the test. So the access to the
pointer d_ptr->focusProxy succeeds, it just accesses memory that might
as well have been reclaimed. But this is quite undefined...
Task-number: QTBUG-28321
Change-Id: I2624631f5e5c2a8aa8bd4efe1fc128eba6c61f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This changes behavior, but I would argue it's a good change. If you
create a panel and activate it (e.g., by simply showing it or reparenting
it onto an already-visible item), you expect the panel to gain focus /
which is sort of the whole point of activating it. Prior to this change,
you had to have explicitly called setFocus() on one of the panel's
children, which would give that item subfocus, for that item to auto-
gain focus when the panel was activated. This change makes it more
automatic. If the panel itself or any of the widgets in its focus chain
can gain focus, they will gain focus when the panel is activated.
So the new logic is - if the panel already has a focus item, so if
someone explicitly set subfocus on an item before the panel is shown,
that item gets focus. Otherwise, if the panel itself can gain focus
(e.g., someone makes a line edit / text edit panel), it gains focus
when activated. Otherwise, we search the focus chain until we find
the first item that can gain focus. This last case is the file dialog
case, where the dialog itself can't gain focus but typically the
first item in the focus chain is the primary focus widget, such as
the search field or the directory list view.
The change also fixes this for the first Tab. If you clear focus on
a panel, the user expects to be able to press Tab to regain focus.
Prior to this change that didn't happen. Now, the panel or the first
in the focus chain that can get focus gets focus on first tab.
Task-number: QTBUG-28194
Change-Id: Id7ec1741d0d5eb4ea845469909c8d684e14017f1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
For moc, rcc and uic, then it's friendly for tools like ccache.
ccache is using md5 to check file modification, but the different
timestamp info will cause different md5 for same meaningful
contents, it will disabled ccache.
Updated the autotest for uic and rcc.
Task-number: QTBUG-26589
Change-Id: I9f1dcf6cd826ad9603af6e183757bcd748c32bd1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We need to do bounds comparison on the actual offset we're going to use
with _mm_load_si128 to read 16 bytes from memory (even though we won't
use the trailing bytes in the end).
Task-number: QTBUG-28324
Change-Id: Id0d6094da796ca67338d8ad225fa6b2f309bbe6e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: Ib05a120db16f65d9833663445c028971d4de3d29
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Avoid QHash randomization so that the order of the XML attributes is stable
This was causing intermittent failures.
Change-Id: I4cc0dba4b0c2ec36601f3b06fb17ff80005cc9fb
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This increases consistency a lot: all windows and dialogs from a Qt
application will show the app display name in the caption, on Windows and X11.
This helps identifying which app a dialog belongs to, which is especially
useful when the dialog is very generic and shows up unexpectedly.
For compatibility reasons, the app name is added to the caption only
if setApplicationDisplayName() was called -- or if the caption would be
completely empty. The standard Qt4 case (setWindowTitle + no display name)
is unchanged.
Change-Id: Ib284c62c1f4c0bc923e5bc2d10247d95e9aa76c1
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This test fails on some setups and a pending critical change
causes the existing bug to trigger in CI. To avoid blocking
other changes because of this bug, it's been marked as
insignificant until such a time when it can be fixed.
Change-Id: Ide41f7b1c76209f9c05f95f996b2364d5dea5e67
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We also need to detach() the taken value in case the compaction triggers and
modifies the underlaying data.
Change-Id: Idcdeba4236b8e208d107d41be2decbdfc5721300
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
These tests have been failing on certain setups for a while,
but some new critical changes causes the failure to trigger
on the CI system as well. We mark them as insignificant until
they can be fixed.
Change-Id: I467e7030c55d6f23515275b4062c17068d2b688c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
When clicking at the bottom-right corner of a menu in a menu
bar, it appears at the wrong position. Add test and stabilize
RTL-tests by making sure the layout direction is cleared should
they fail.
Task-number: QTBUG-28031
Task-number: QTBUG-2596
Change-Id: Ibc5ae916388753908e9f3ee98e8859faaa0c8723
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The stepSize property was missing in Qt 4 and is
a sensible addition to the value interface.
Change-Id: I7571800d50ee7e4194c09c4db40300809a1ce45a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
so other modules can actually re-use the code without referencing qtbase
sources.
Change-Id: Id66f07b476e539273dd32455e7642a17d7e5d0ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is a compile-only test, and it's not even marked as a testcase in
the autotest system.
Change-Id: I9b48ddad3c8e3e953d0e6fcfa010bab73289bc6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Commit 0696071316 moved away from QDom but
also lost the ability to fill the introspection field of the created
QDBusIntrospection::Interface instances. This commit now generate the
string again as we proceed with the QXmlStreamReader based parsing.
Task-number: QTBUG-26668
Change-Id: I8f406e1f4e9d3e667a8557db69da36cac369ba4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With the change cff46983a, prepared queries can now store a
named paramater to be used more than once.
When using ?, thus positional binding, there is no named
parameter, thus there is no need to store it.
When prepare is called from a query with ?, it currently
causes an error when the feature QSqlDriver::NamedPlaceholders
is true. Because holders values are called while holders is
actually empty.
QSqlDriver::NamedPlaceholders is true for QOCI plugin only
but the problem is independant of the plugin used.
Adding a test case with a test driver to make the test runnable
without Oracle installed.
Change-Id: I6d7491f7e09a7b62d2d4d216b40fedd67e927e27
Reviewed-by: Matt Newell <newellm@blur.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
