CMake doesn't have a PROJECT_BUILD_DIR variable, but it does have a
PROJECT_BINARY_DIR variable.
Note that this might still be the wrong thing to do according to
35a30c7ebb , but it's still somwehat
better.
Change-Id: I493f82a791d933a16011d91774aaac4bcaffc5e5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
New option --skip-condition-cache allows forcing recomputation of
condition simplification.
Useful when debugging certain condition mappings.
Change-Id: I68a85c2e4085ad7a3043d7334db71a334a6469e9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The DEFINES -= QT_NO_LINKED_LIST is no longer needed, so just remove it
from .pro and CMakeLists.txt.
Handle $$[QT_INSTALL_TESTS] and $$TARGET in target.path.
When we have DESTDIR set, do not use target.path for OUTPUT_DIRECTORY.
Fixes: QTBUG-78219
Change-Id: I5161a955b25ff2f3b35428dc4b935a7c9d2d425b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Test in QtQuickControls2 rely on this variable, which basically points
to the root of the project. We can't use PROJECT_SOURCE_DIR since it
will vary depending on whether we build tests as stanadlone or part
of the build.
Change-Id: Ic59a79af2b4b62611d6c32391c936e98e469dea0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This fixes the qatomicinteger magic by making $$basename work for one
particular case.
qthreadstorage still needs investigation.
Task-number: QTBUG-78221
Change-Id: I7bb38f6ca24273bcf0443ab25685c8e815814c3c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since at least one system provides config files without an included
target.
Change-Id: If1f336aab4cec9704412349d7951849ee8c3dabb
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
SOURCES -= foo.cpp statements should now be handled correctly by the
script. The script uses the same principle as for subdir handling:
go through all scopes to collect source removals, and then generate
new scopes with total conditions that take into account both
additions and subtractions and their conditions.
Should handle NO_PCH_SOURCES case as well.
Tested on gui.pro, network.pro and qtconnectivity bluetooth.pro.
Change-Id: I0cc913ef64cecf09e8ada4e6a3ce3ccb4365b44e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Store the results of simplify_condition in a json cache file,
next to the pro2cmake.py script.
Dramatically speeds up re-conversion of projects.
The cache is cleared whenever the content of the
condition_simplifier.py file changes, effectively presuming that the
condition computing code has changed.
Sample times.
Initial corelib.pro conversion - 142.13 seconds.
Next re-conversion with hot cache - 1.17 seconds.
Change-Id: I8790b2736358236e4b23bcb5f10f45a36fdfa426
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Add custom code to handle WINDOWS_SDK_VERSION comparisons,
similar to how it was done for QT_GCC_MAJOR_VERSION.
Also fix simplify_condition to do mapping of conditions to unified
tokens, similar how it was done for target conditions, so that the
simplification process does not fail because of whitespace.
Change-Id: Ia0cec6e1ffeed4c7859bb2a44423d0160222f425
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We can't really handle this in a generic way now, because the values
of CONFIG() can not be directly mapped to features. It might be
possible in the future if we make sure that all configure.json entries
that have output publicConfig or privateConfig also generate a
feature. For now just hardcode the case.
Change-Id: Ie6b82b87973deb84012c3620b41920b343ffb2da
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There was a missing f prefix for the f-string, and thus no
replacements were done.
Change-Id: If778d4ce25905c302de22a76c27af00a63f3c515
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I haven't checked if the config for wayland-kms actually works, as that
requires building for a target that supports it (RCar M3 or similar).
Task-number: QTBUG-78177
Change-Id: Ib30a63a4e5feb955d17763c37e32ad3f2c13d358
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Do not stop the whole conversion if we encounter $$files(..., true).
Ignore the 2nd parameter for now.
Change-Id: If9334ce9719b98c33716dc7f18ba8aede05fe8b1
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
If the qml files are not listed in the qmldir file they do not need
to be written again, since it is expected that they are registered
by the c++ plugin code.
Change-Id: I624aedb182583f942bf1d1a322861c47a64b5065
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
On macOS the config.tests executable should not be a bundle,
and on Windows it should be a subsystem console application.
Change-Id: I2c8078cc9537df42683f3ff3bcce409402824555
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It makes too much noise when configuring.
Change-Id: I0a65cb99d0dc9a6c0d288cf548035cca1bea57bc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
WAYLANDCLIENTSOURCES and WAYLANDSERVERSOURCES is used heavily throughout
QtWayland.
Task-number: QTBUG-78177
Change-Id: I4507447054c435f78e82c2ca3e9404288db6c1f6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change the grammar to parse and extract the whole expression
that is present in the requires clause.
Make sure to preprocess the parsed content as a condition,
so that the value passed to map_condition and simplify_condition
is valid and the functions can handle more complicated conditions
like qtConfig() and if().
Wrap the final condition with an extra pair of parentheses, so that
the negated condition is computed correctly.
Handle the require clause in subdir projects, top level tests projects,
regular test projects, as well as top level repo projects.
Examples are not yet handled, because the would require some kind of
CMake public api to e.g. query if a feature is enabled.
Change-Id: I9af96cf022e47b66f24db3ca15d3803dda7a5d7c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The qmake syntax for env var expansion is "$$()".
The parantheses are not optional, so the optional "?"
modifiers should be removed.
This fixes the failing test_recursive_expansion pytest.
Amends c58df80cf7.
Change-Id: I5d7217555287ee7d96d6b38027964b1141af208a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Previously we used a regular expression that matched parentheses,
but the regexp didn't match the parantheses in a balanced way
if there was more than one pair.
Instead use a helper function that uses pyparsing to match
balanced parantheses, and removes the if keyword, leaving
just the nested expression.
Change-Id: Ie621e6a305e57aa411838288599366ccfba063cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Sympy uses eval() inside its code, and that can raise an
AttributeError exception, so we have to catch that.
This happened when converting qml.pro in qtdeclarative.
Also the formatting change removed the raising of an exception
when an unhandled function was encountered in handle_function_value,
which caused not returning any value in such a case.
Instead just return the whole expression string, without checking
if the function is in some whitelist.
Also encountered in qml.pro.
Amends 91634c3c9b.
Change-Id: I47b73af1de0180becb9ef4fb78a8c35a04928d34
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Handle conversion of config.tests that are used as out-of-line tests
in configure.json.
The script should able to handle conversion of simple config tests
including nested scopes.
One thing that will probably be needed in the future is handling of
pkconfig which is used in qtwebengine config.tests.
There is also a hardcoded list of config tests which should not be
automatically converted by pro2cmake, either because they were hand
written, or because it doesn't make sense to convert them for now.
Incidentally, we should fix example conversion to also handle nested
scopes, similarly to how it's done for config.tests.
Change-Id: I862e67c4d19d5ed8cb7fc7c9f9aaf6e3d503aa03
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generate appropriate qt_config_compile_test() calls for config tests
that have CMake projects. These are protected by an if(EXISTS) check
so that configuration doesn't fail for repos where the config tests
have not been ported yet.
Adjust the qt_config_compile_test() function to use try_compile for
projects specified via new PROJECT_PATH argument.
Change-Id: I83c061e384f68688a654b782fd7a9bede282d1e3
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Second and final batch of changes related to string
formatting styling.
Change-Id: Ifc0e999ee95fe52fd076ac2f001b4a58f82ab5be
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For example qtserialport has
requires(!winrt)
and with this patch it gets translated to
project(...)
if(WINRT)
return()
endif()
find_package(...)
qt_build_repo(...)
Change-Id: Ic38b803b464037a42adc55930947f57c5efa7b45
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
EMSCRIPTEN is the name in cmake land as per emscripten's toolchain
file.
Change-Id: I11fa444204003f25f14fbf993ecf6766bf37d884
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Do not mis-report "PLUGIN_TYPE", "PLUGIN_CLASS_NAME", "CLASS_NAME"
and "MODULE_PLUGIN_TYPES" as ignored.
The script evaluates these.
Change-Id: I26546a7eff61a20afe68168a865fe3ac99f66319
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Extend globbing support in resource in order to be able to handle
globbing expression present in qmake expression such as
RESOURCE.files = *.qml
Change-Id: I55a38c0bdc231a6a1ddbd65be7f57ca6f7dc2932
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
In some cases after cleaning and simplifying the conditions
you can end up with the following line:
((()))
Python interprets that as an empty tuple:
>>> a = ((()))
>>> a
()
and then the simplify_condition (sympy) method fails to continue
with an error:
File ".../util/cmake/pro2cmake.py", line 1993, in simplify_condition
condition_expr = simplify_logic(condition)
File ".../sympy/logic/boolalg.py", line 2292, in simplify_logic
expr = expr.xreplace(dict(zip(variables, s)))
AttributeError: 'tuple' object has no attribute 'xreplace'
You can see this behavior with the file:
qtmultimedia/tests/auto/unit/multimediaqml.pro
Change-Id: Ied4285b67f1e567660be49f6610311199bc48a22
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
There are some libraries inside examples that cannot be
properly translated due to the fact that the is_example
variable is True.
This condition excludes it, for example:
qtmultimedia/examples/multimedia/spectrum/3rdparty/fftreal/
Change-Id: I68a1e7d1684ab4604f54b6d16bf88d04e3214ba9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extend the example writing section to handle qml plugins. Detection
is based on whether the plugin config is detected an the target links
against Qml.
add_qt_qml_module() now uses the the public facing API underneath.
Change-Id: I2ccd06548e7b5b18c9dc3338b835bc115fa97809
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use lower case for the function name as that's cmake style.
Change-Id: I6c53166aa3a8cece4abe8a485e06bd359fc12a06
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Brown paper bag for me, don't use a comma to separate parameters when
calling a function.
Change-Id: I21e16142fab4fd1c2714df13cd6a892b036e899a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace things like $$(FOO) to $ENV{FOO}.
This is needed to stop the script from crashing when it sees $$(FOO)
in a .pro file, like in
qtmultimedia/src/plugins/directshow/directshow.pro
A better approach in the future will be to write a Find module that
uses the env var to find the relevant headers, and then instead use a
CMake cache variable, to make the build more robust in case the env
var is removed after first configuring the project.
Change-Id: Ia5b3dc3a90e1d4159a8b90acdade85f34b5165f9
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The option --only-missing was added to check only the
cases where there is a pro file and not a CMakeLists.txt
Change-Id: Ifc6233552757e0afe8e7242a79f958e8bc77f823
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
flake8 was used to evaluate the file, with a couple of exeptions:
E501,E266,W503
black was used to reformat the code automatically
The changes were:
* Added a README that explains how to use pipenv and pip,
* Remove unnecessary return statements,
* Remove '\' from the end of the lines,
* Use f-strings (>= 3.6) since we are requiring Python 3.7,
* Commenting unused variables,
* Adding assert when Python >= 3.7 is not being used,
* Wrapping long lines to 100 (Qt Style),
* Re-factoring some lines,
* Re-ordering imports,
* Naming `except` for sympy (SympifyError, TypeError)
Change-Id: Ie05f754e7d8ee4bf427117c58e0eb1b903202933
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In qmake land, testlib.pro has "console" in MODULE_CONFIG, so linking
against testlib implicies CONFIG += console. The need for a console app
is typically also covered by other cases, except in qtdeclarative's
qqmldebugjsserver binary (and some others). They are not test helper
binaries, they are not Qt tests themselves, but they must be console
apps and due to their QT += testlib in the .pro they become console
apps. So with cmake they also must be console apps so that the unit
tests that launch them and read their stdout can pass.
Change-Id: I687fdc910b550051750be74ecd176dd96626675c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the future need will need to continue to tie qdoc runs still to
targets, just like with qmake. This change prepares us for that by
ensuring that add_docs takes two parameters and that any re-generated
CMakeLists.txt from now on gets it right.
Change-Id: Id0256dc1e2f2f59f3b4e4ca98f0d10d025d189fb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed to successfully parse qtconnectivity projects
where there are expressions like:
WINDOWS_SDK_VERSION =
$$member($$list($$split(WINDOWS_SDK_VERSION_STRING, .)), 2)
Also fix '$$member' to be handled in the function.
Change-Id: I35b5cff8c39b3a35d485d1d72f5d668cccbe9b2f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Prefix by python executable and drop os.nice.
Change-Id: Idd1d0de6695887652db84261da1130a084e5af78
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Change-Id: I8113d7dd4e7967d020d59a5b4104e8366d55283c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Almost every non-trivial .pro file has line continuations.
Remove the warning as there's nothing the user can do about it.
Change-Id: Ic8a54e5e5cc39a31267800edde4b0ff2b0276a48
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Given HEADERS = $$PUBLIC_HEADERS $$PRIVATE_HEADERS
$$PUBLIC_HEADERS can be expanded into a list of source files
which in turn contain $$PWD/foo.cpp.
The $$PWD needs to be expanded as well.
This is the case for qtwebsockets/src/websockets/websockets.pro
project.
Change-Id: I3aa14203ee8d177fadd12a7e3212c3250970e0a8
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We should use the new relative path to the project, instead of the old
specified on command line.
Change-Id: I54cb1cefd4df079a95c364b7c7c66c36941add01
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Some modules define their own manually-maintained lists, and we can rely
on the headers generated by each module to include in the pch as well
e.g. QtCore/QtCore.
There's also e.g. QtWidgetDepends for QtWidgets, but this only
works for modules, not for tools, examples or other applications.
For now we'll use the Qt<Module>/Qt<Module> headers for the
modules we depend on.
Building with PCH can be disabled with -DBUILD_WITH_PCH=NO, and it only
works for versions of CMake newer than 3.15.20190829.
Change-Id: Iae52bd69acfdfd58f4cd20d3cfa3c7f42775f732
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Specifically skip cmake tests projects (because they are only needed
when Qt is built with qmake).
Also skip test qmake projects in qmake's test suite.
We might find more tests to skip in the future.
Change-Id: I4c3a42db669b31e81fd06206652371b6a70fd8ce
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
If the project path starts with "examples/" relative to the repo
source directory (which is decided by location of .qmake.conf),
consider the given project file to be an example.
This makes the usage of run_pro2cmake.py easier, specifically by
being able to point it to a repo source directory, and getting most
project conversions correctly.
Change-Id: I93de98f8fc97af509c1f96cdebad3681190a53d1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The script now detects whether the project file given is a:
- top level qmake project (qtdeclarative.pro)
- top level tests project (qtdeclarative/tests.pro)
- top level examples project (qtdeclarative/examples.pro)
This is done by finding the .qmake.conf file in parent directories of
the given project, and comparing the project's location to the
.qmake.conf location.
For the top level qmake project and the tests project, the script will
now use a predefined block of code that we usually had to copy paste and
change manually. Now only small bits will have to be adjusted manually
(project name and dependencies).
For the examples project, the content is surrounded by the required
build examples commands.
As a result, developers will have to worry less about knowing where to
copy paste from.
Change-Id: I4f751b371e74eeb86e070d58635c3d99b970ab18
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I8cb97afaaed46ee64b5a133e797179d7ddecdeef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We use
qt_find_package(harfbuzz PROVIDED_TARGETS harfbuzz::harfbuzz)
which would set harfbuzz_FOUND. Since variable names are case-sensitive,
this is also the name we must check for in the qt feature condition.
Change-Id: I43420489c3310bc9c3e5cc798a005c8d5b0ab646
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Conditions scopes that had "else" were not handled properly.
The "else" condition should be expanded to its proper negative full
form.
Also every condition "piece" should be wrapped with parentheses before
being passed to sympy simplification, to be sure that boolean
operator precedence is applied properly.
Refactored the code a bit to make it easier to read.
Change-Id: I4726845b867f93c3afbc9362cdce1cd063ccff63
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Essentially pass them through without failing the whole
conversion process.
Change-Id: I7bbd198203f79b45120a7254e2ecdf58e32f9525
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
no-png is an old unused scope that should be mapped to the png
feature instead.
Map contains(QT_CONFIG, shared) to correct variable check.
Sympy doesn't like dashes in indentifiers, so replace all of them
with a _dash_ token which will be replaced again at the end
of the condition simplifying.
When doing sympy preprocessing, fix mapping of target names that
don't contain double colons.
Change-Id: Id3d37800665c96505b7cbb1d80fdbed59c3ae9c0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Designer components target names need to be prefixed with Qt.
Change-Id: I13037820b080d88cd670f2db97232509eb868daf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The libclang test is implemented as a custom FindWrapLibClang module.
The module does mostly the same things as the configure test in qmake
land.
Change-Id: I965f284baf7daef074e22f033047c35a917c8808
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Remove repeating '../' pattern from target names, since we generate
the targets in the correct location with CMake.
Change-Id: I89d527a9ad717f742f8d0e5921f378e6ac0a229d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use GLOB_RECURSE for testdata instead of globbing the top level folder.
Although RCC supports scanning directories, it will result in alias
collosions and test not being able to find the files on platforms
where test data is embedded into the binary.
Change-Id: I35d3d46a5d9fcafa5c8dc833eafdd0044ffe355f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Update all public Qt macros to use qt6/QT6 instead of qt5/QT6.
Change-Id: Ib178f4fa21f37dfb8da7d4d8c097aa0e96c9d9f9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also add support for modules that have no private module counterpart.
Both are needed for Designer's QtUiPlugin in qttools.
Change-Id: Ia7e9d8837140e1de5cd59e196b4f63481ab68298
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Update pro2cmake to generate CMake projects where resources are handled
via the QT5_ADD_RESOURCES command.
Change-Id: I66dc2174a45fc652fd8c9b7e3c0f46f58ae02c0c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Add command line argument to make run_pro2cmake invoke pro2cmake with
the --is-example option so we can convert examples in bulk.
Change-Id: I162eddffc509f16a97de5517698e8daca5207b74
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Teach pro2cmake to use add_qt_test_helper instead of
add_qt_executable when the qmake 'qt_test_helper' feature is used.
Don't use macOS bundles when building tests on macOS, because that
breaks path assumptions for certain tests.
Introduce a new OVERRIDE_OUTPUT_DIRECTORY option for add_qt_test_helper
that allows placing the binary into a folder other than the test parent
folder. I considered changing the default behavior not to place into the
parent folder, but that would break all existing tests, so I opted for
override approach instead. Ultimately we might want to revisit this
later.
Change-Id: I68fd1dea608333c2af0d3896050b40a6964dd87f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Rename the alias property used by add_qt_resource() to QT_RESOURCE_ALIAS
to match property naming conventions.
Change-Id: I97b12b0b794e158f03dabeed5ec23a3b7d56cfbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Support translating the QTQUICK_COMPILER_RETAINED_RESOURCES variable.
Fix missing PROPERTIES keyword for set_source_files_properties() commands.
Apply source file properties to standalone source files as they appear
in the project as it was possible for them to inherit values that were
not meant for them.
When creating resource lists, prefix them with the resource name
to avoid collisions.
Change-Id: I69ef85ea9414c0e7c07b1ebfb76d24bd878ce70f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is required for paths that contain spaces, otherwise the .qrc
file generated by the build system is invalid, and the RCC run fails
at build time.
Change-Id: I887100b08052b49dd7ea4dd92b94f357a7d9d16e
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add QT_QML_DEBUG to target when we have qml_debug in qmake's CONFIG
variable.
Change-Id: I266c7313db12667498d4f770c73aec9e79c0b50e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
tools/qml/qml.qrc uses prefix="something", which means that the leading
slash is implied.
Change-Id: Ia856fcef36873442a84b9162f1901cb31ca37b49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When DESTDIR has relative paths as a parameter we should prefix those
with ${CMAKE_CURRENT_BINARY_DIR} in order for them to be placed in
the correct location.
Change-Id: Ie9e9d656cbb54457bdf99425e3e1b05e09f20d7c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Collect files passed to RESOURCES and write out an add_qt_resources()
call. Similarly, for each "object" passed to RESOURCES (not a file),
write add_qt_resources(), too.
Change-Id: Idbb368ebb4d003a48e7c47ebaf53a78f65ebf9b9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change makes the PREFIX parameter a required parameter if the
target does not specify a default. This way the behavior is clear when
reading the code: add_qt_resource() without PREFIX means it must come
frmo the target.
Change-Id: I79024e70e7b4d32a5164b93aa08ec9ff409b2d39
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
* Add support for a QT_RESOURCE_PREFIX target property, that
add_qt_resource respects. This makes it convenient to add files
to the resource system for a project without the need to repeat
prefixes. In qmake land with multiple resources they're repeated
in the foo.prefix variables or in the prefix attribute in .qrc
files.
* Since /qt-project.org/imports is in the default QML import search path
and the hierarchy under the import search paths is "regulated",
we might as well make add_qml_module set QT_RESOURCE_PREFIX on
the target. We can compute the correct value for that. This
allows removing the redundant prefix from the add_qt_resource()
calls for the qml files.
Change-Id: Ic15130dc9e432340fc3edf93e35f2a803b4b40eb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Detect this in the conversion script and map it to a source file
property. When that's the case, avoid repeating the file list but
instead store it in a variable.
Change-Id: If3119d83914bb798766e27351746b4e867bd3ab3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extend the hanlding of special condtions outside single line statements.
Conditions such as 'qtHaveModule(gui):qtConfig(opengl(es1|es2)?)' would
not be handled properly.
Change-Id: I992f75311b82d84c574c9cb4ef6d7d648f425d81
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add support to pro2cmake to handle variable assignments via functions,
e.g: TARGET = $$qtTargetLibrary($$TARGET). The evalulation of the
functions happens during parsing and is very rudementary in nature.
Currently it only covers the qtTargetLibrary(), required for certain
projects, and quote(), required for passing unit tests.
If we run into any unhanlded function an exception will be thrown.
This patch also changes the TARGET property on Scope to expand the
value.
Change-Id: I678b7058067348a3972944bdba110f556cf22447
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This patch fixes the processing of pro files that do not reside in
the current directory. Before this patch statements such as SUBDIRS +=
Foo/Bar/z.pro would cause z.pro to be parsed in the current
CMakeLists.txt. What we want instead is a call to
add_subdirectory(Foo/Bar). Failing to do so leads to issues with
relative paths specified in z.pro being invalid.
Change-Id: I7bfa7837d54877e5340081d1c9aebe855cf6796d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Set OUTPUT_DIRECTORY on a target when DESTDIR is specified.
Change-Id: I72061ae8156356fcb2aa9ba6cb87049fcef600c7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
In some tests in qtdeclarative we have projects that are built
as a lib with CONFIG=plugin. Without these changes they would be
translated to an add_qt_module call.
Change-Id: I208d31d43b087ed0b87eb4715f6c49b218fcc2c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There are project files that not only do SUBDIRS -= foo depending on
some condition, but also SUBDIRS += foo. To handle these cases
correctly we need to do a whole pass across all scopes and collect
all addition and subtraction conditions.
Once we have that information, we can compute a final condition for a
particular subdirectory. After we have the condition information for
all subdirectories, we can simplify all those conditions using SimPy,
and group all subdirectories that have the same simplified condition.
Finally we print out the subdirectories grouped by the simplified
condition.
The end result is similar to how we have extend_target() calls with
multiple sources grouped into a single conditional call, except in
this case it's subdirectories.
Amends b26b1455d7.
Change-Id: I5b648ac67264ba9a940561baee5b49c43c13b721
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Values such as Foo.2 would no longer be converted into Foo due to an
error in the regular expression.
Change-Id: I6a11d02662782094f5b264f86a930d9aaf002c77
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Resources shared by tests were incorrectly setup. Resources would
always be registered with BASE/filename as alias. In these cases the
fix is to set the alias with the original file name.
Change-Id: I667ce7b74ae5f86740c8bb8a040cc2895a3dc116
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure the URI name for qml modules correctly strips out the version
number for instances such as QtQuick.Controls.2.
Change-Id: I18e706b371323eeefdd6d7564b922265fa5cad3f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Always install qml files regardless of whether the install_qml_files
configuration is present in qmake. This was causing most unit tests to
fail due to missing qml files.
Change-Id: I53c7200cfa66805d0e459190ef105c1a73c34a5f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
PRO_FILE_PWD should return CMAKE_CURRENT_SOURCE dir without any
compenstation for mistmatching directory locations as we are doing with
PWD.
There are test that use a shared .pri project file which gets included
into the .pro file of test. In this .pri file we have a statement such
as DEFINES += QT_QMLTEST_DATADIR=\\\"$${_PRO_FILE_PWD_}/data\\\".
Since the .pri project file is located in ../../shared/shared.pri the
substitution would result in
${CMAKE_CURRENT_SOURCE_DIR}/../../shared/data instead of the expected
${CMAKE_CURRENT_SOURCE_DIR}/data.
Change-Id: Id899d6a624acc45425af47ca9aa1b332cf63e659
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This makes the SUBDIRS -= foo conditions simplified and nice to look
at.
Amends b26b1455d7.
Change-Id: I9ffe3db1e358f94fb65a885cc90c44218482825b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Setting the "QT" SetOperation which defaults to "core" and "gui",
should only be done once on the top-level .pro scope. To distinguish
the top level scope, we need to check for both an empty parent_scope
and an empty base_dir.
Amends 9e96c38426
Change-Id: I9db1cbf0e6592c8c195d11b97b3eff40b1adbcbd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Dictionaries are mutable, and should not be assigned as a default
parameter.
Change-Id: Id08c17f89c17b404560241849603e1e1a0ec6562
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It has been decided, that going forward all qml files are to be added
to a module via the resource system. This patch does the ground work
to make sure all qml modules in the qt codebase follow these new
conventions.
New properties on targets have been added so that we can't track all the
qml related information for later use.
To make sure it is still possible to install qml files we added the
qt_install_qml_files() command.
Pro2cmake has been adjusted to handle the special cases of versioned
qml modules (e.g: QtQuick.2). It will now insert a TARGET_PATH
override to avoid the default conversion from the URI parameter.
Finally, this patch temporarliy disables the quick compiler by moving
all relevant code into a dummy function. This will be removed in a
follow up patch where the quick compiler will be enable for all
qml files present in resource files.
Change-Id: I09fe4517fad26ec96122d9c7c777dbfbd214905c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If unset QT by default has value: "core gui". This patch adds this
behavior by pre-defining the value in the root scope.
qmimedata CMakeList.txt was re-generated.
Change-Id: Ib8b6064bc46c72d829e0077d09f21bbfb494e137
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
CMake doesn't support removing subdirectories therefore one need to
convert all removal to conditional adds. The resulting code doesn't
win a beauty contest. That is because handle_subdir works on already
processed strings which means it doesn't have access to the boolean
operations. As such it can not minimize the expressions, but it works
and in the most simple cases it is pretty good.
The patch re-generates CMakeLists.txt under tests/auto/corelib/kernel
excluding qcoreapplication, qmetatype, qmimedata, qobject, qtimer,
which are suffering from unrelated problems, like for example Gui,
pthread linkage issues.
Change-Id: I18a02f6eda7a3b41b1313211c8bc9ce277bb67be
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds support for the qtquick compiler feature, which
will embed the compiled qml files as resources along with the
respective qml_loader.
This patch also changes the add_qml_module call to require either
EMBED_QML_FILES and/or INSTALL_QML_FILES to be specified.
Change-Id: I32d29c9b554b8286ed3b980027a56dd4abe11c92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QT_SOURCE_TREE is a variable that is set in qtbase/.qmake.conf.
In qtbase, it's used throughout various
projects to find cpp sources when building standalone tests (among
other things).
Everything works fine with qmake, because even if qmake is invoked
on the tests subfolder, qmake searches up the source directory tree
until it finds a .qmake.conf file, and uses that.
When building qttools with qmake, the qdoc project expects
to have a QT_SOURCE_TREE value, but it's not actually set in the
qttools/.qmake.conf file, so the generated include paths that use
that value are incorrect. Curiously the build still succeeds.
Now in CMake land we replaced QT_SOURCE_TREE with
CMAKE_SOURCE_DIR, but that does not work properly when doing a
standalone tests build, because the project in that case is the
tests one, and not the qtbase one, so configuration fails in a
developer build when trying to configure some private tests.
So far I've found that only qtbase actively uses this value.
A temporary fix is to save the qtbase source directory into a
QT_SOURCE_TREE variable inside the generated
BuildInternalsExtra.cmake file.
The pro2cmake script is changed to handle presence of QT_SOURCE_TREE
in a qrc file path. This is handled by finding the location of a
.qmake.conf file starting from the project file absolute path.
This is needed to stop the script from crashing when handling
the mimedatabase test projects for example.
The change also regenerates the relevant failing test projects, and
thus standalone tests (when doing developer builds aka private_tests
enabled) now configure and build successfully.
Change-Id: I15adc6f4ab6e3056c43ed850196204e2229c4d98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure to handle glob expressions in the entire path given, not just
the end of the path. This handles tests like qsslkey and qnetworkreply.
Also copy/install the testdata in the final test directory path under
a "testdata" subdir.
Previously INSTALL_TESTDIR was used, which was never set to anything.
Change-Id: I2408e12f586cadeb524ffa249e851a4179324b23
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Some projects in QtQuickControls force the qml files to embedded into
the binary. This change exposes an option to mimic that bevhavior.
Change-Id: I4cbf0c21c05ca03b8dd1189eb7d81e43279c7157
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use a the more appropriate scope.get_files() to retrieve the qml file
list from the qmake project. This makes it more consitent with the
rest of the conversion script and fixes some issues with incorrect
aliases in qrc files.
Change-Id: I8907516be9457ba0d60d14af53d241197637aa9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extend add_qt_test for qmltest by setting the option QMLTEST
when we detect the config qmltestcase.
We also forwards the GUI option to the tests when detected.
This is a requirement for some QtQuickControls2 tests.
Finally when doing a prefix build, we add the install directory
to the QT_PLUGIN_PATH environment variable.
Change-Id: I3b2ecb494955976e98abbcf3d03925c314336122
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
"mac" scope in qmake actually means all mac platforms,
just like "darwin", aka macOS, iOS, watchOS, etc.
Regenerate corelib, gui and testlib after this modification.
This is a requirement for the iOS port.
Change-Id: I029c7e907d13f6ec31816a08602a5930f9ac16a7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Reduce the amount of code required to add a qml plugin to cmake
by making add_qml_module wrap the add_qt_plugin code where required.
add_qml_module will also create a dummy target so that qml files
will appear as source files in an IDE when no cpp files are present.
CXX_MODULE qmake parameter has been dropped in favor of an
explicit IMPORT_VERSION parameter, since it was only used to
determine the version when the IMPORT_VERSION was not specified.
Change-Id: I4a4b626566720d04c62d246ca521db8c4a95b10f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The pro2cmake conversion was not processing private libraries specified
with the QT_PRIVATE variable.
Change-Id: I0c44595bb8e1ed9a748af51a2a859bee62e7d264
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a feature generates a private feature, we should not just repeat
the condition but also make it depend on the original feature. In qmake
features had different outputs, while we have a 1:1 mapping. For example
the developer_build feature had "private_tests" as an output feature.
There's no condition attached to the feature and auto-detect is off, so
we'd generate
qt_feature("developer_build" AUTODETECT OFF)
qt_feature("private_tests" AUTODETECT OFF)
and that's wrong, because when the user enables the visible feature
(developer_build) we want it to propagate to the private_tests feature.
Change-Id: Id8408864802fa1e1ed9e67a5f47d1d2fde38d321
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We have to treat the resources from mimetypes in corelibs specially
as they are reused for two test cases. Since we no longer use the qrc
files, we have wrapped the relevant code in a function that can be
called for every target that depends on it.
This change also corrects formatting for the generate CMake code
regarding resource commands.
Change-Id: I50a05c81151d75aefc9ca165f5ffeb9f5cd77162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Allow _expand_value to expand variables that may have more than
one level of expansion when the regular expression covers all
of the input. E.g.:
A = Foo
B = $$A/Bar
scope.expand('$$B')
While the original code was able to expand the string '$$B/source.cpp' to
'Foo/Bar/source.cpp', it could not expand the string '$$B' completely.
The latter would always return '$$A/Bar' instead of the expected 'Foo/Bar'
string.
A test case has been added which coveres the above example.
Change-Id: Ie3b5739c24ecbeb67d408dd204b0f54bab1d0f3f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These changes enable the support to handle test data and install or
package them as resources when appropriate.
This change does not handle the GENERATED_TESTDATA or
TEST_HELPER_INSTALLS since there are very few occurrences of these and
we can handle those as special cases.
Finally, in add_qt_test, only append CMAKE_CURRENT_SOURCE_DIR if
the path is not absolute.
Change-Id: Ic20b9749d10e2a09916f2797606116471c64850b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add the necessary code to both the QtBuild and pro2cmake to be able
to handle qml plugins in qt declarative.
Add condition replacement for QTDIR_build to QT_BUILDING_QT so that
certain qml examples work correctly when being built in the build
directory.
Fix add_qt_resources not being updated during build after changes
were made. Files list used as dependencies were not populated.
Add missing module mappings for qtdeclarative.
Change-Id: I0f71d0a3a0e7e97ba96807950d11cffaee04d9b2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Tests in qtdeclarative were failing because the above variable was
expanded to an empty string. This causes the tests to be unable to
locate their test data when executed.
Change-Id: Ibc3c094123f25d688a73c11886ac1673b6930c54
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The xcb feature controls whether to build the xcb platform plugin. The
feature depends among other things on
qt_find_package(XCB 1.9 PROVIDED_TARGETS XCB::XCB)
to succeed. This means at the moment setting XCB_FOUND to true, that's
what the condition checks.
Later on, in configure.cmake, we also check for other components in the
XCB package, for example:
qt_find_package(XCB COMPONENTS XINPUT PROVIDED_TARGETS XCB::XINPUT)
If this component is not available, the xcb platform plugin has perhaps
reduce functionality, but it should be built and the feature should be
abled. However it isn't, because when that find_package call fails,
XCB_FOUND will be set to false. And that in turn will disable the
feature as the condition fails.
Therefore this patch changes the condition to check for the presence of
the XCB::XCB target instead.
Change-Id: I534087d8c3b7ff5edf81a5ffcf16cc0bb78b9fb7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt
tool. This will ensure all the right plugins and dependencies are
packaged when generating the apk.
This change also changes the visibility for executable to default/public.
Not having this will cause the application to crash as we can't locate
main() in the executable (shared library).
Additionally pro2cmake conversion script has been updated to perform
the required conversions for the Android settings.
Finally, the 6 projects in QtBase that have Android dependencies have
been updated with the new script and the step that produces the xml
files in run at the end in QtPostProcess.cmake.
Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There were some issues with not finding the git executable and
trying to remove read-only files / files that are still held
by a process.
Change-Id: I7f587c4e96cff763cc0b3438d9ed2249da8f122f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fix incorrect usage of CMAKE_CURRENT_BUILD_DIR, there is no such
CMake variable, it's actually CMAKE_CURRENT_BINARY_DIR.
Also if the host_build option is set when building a module,
the library should be a static library.
Change-Id: I9fb39905118dbd7f33d9821960eaed11f20b30c6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is needed for QmlDevTools in qtdeclarative.
Change-Id: I41adec15f292c91192e171b45d1e5d48764c37c4
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Comments should be removed before line continuations, otherwise
the semantics of an assignment change.
Found this during reconversion of qtimageformats.
Adjust test to specifically test for all the expected values.
Amends 76f5b784ce.
Change-Id: Iaa46bbc9cbd7b2390fe9b5f0078ac33d225a9258
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The auto-generated add_subdirectory conditions in qtimageformats use
QT_FEATURE_foo and not QT_FEATURE_system_foo.
But the non-system ones don't actually check if the respective
qt_find_package(TIFF) got found.
Fix the conditions of the non system features to be the same as the
system ones.
Change-Id: I96f889cf7061721b829d562707c42aa0e29720df
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generate a pri file for public and private interfaces, but map CONFIG +=
internal_module to a cmake option and skip the former if set.
Task-number: QTBUG-75666
Change-Id: I3f4baf1277094f4c22149a9e8769734baf9a235f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The WrapPCRE2 package handles the PCRE2 packages that have targets,
and reuse them.
Change-Id: I24b0b51f507703cd8287f845f7e425f62dd2c3d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some features check for module / target existence. Adapt conversion
script to handle that.
Reland after fixing it.
Change-Id: If4fb942c2e0d16e76a0b9b767bf478527851b0f7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It breaks some conditions, and then the build fails not finding
some private header files in qpa, etc.
This reverts commit 35dc8f496d.
Change-Id: I1b51eac06fe9186181d3f0a7c78f22da7be534e2
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some features check for module existence. Adapt conversion script
and QtBuild feature condition parser to handle that.
Change-Id: I063e49a6fe9f8e9cf3aec985fd78ed4430398586
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add two new options:
If you pass --only-existing, the pro2cmake script will only be
executed on .pro files that already have a CMakeLists.txt next
to them. This is useful if you modify pro2cmake, and only want
to regenerate existing files.
If you pass --only-qtbase-main-modules, the script will be
executed on the main modules in qtbase/src. This is useful
if you want to check if your pro2cmake modification
works correctly on the more complicated projects.
Change-Id: I5228411a252dbef6d77f01ca742a7b98583c5a75
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Initially it was added as a required argument, but not all usages of
the function where adjusted, so the script failed. Make it optional.
Also change the styling of the argument to be snake cased.
Amends 8fea3ec4e7.
Change-Id: I568800401bb5af153b7bb5229f134c2f74b87468
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
When using run_pro2cmake.py, it spawns multiple instances of
pro2cmake.py.
If more than 1 of the instances need to git add prev_CMakeLists.txt at
the same time, git add might fail due to the acquired index.lock.
The cleaner solution would be to use a file lock as a mutex, but that
requires an external pypi package.
Use a poor man solution of retrying the git add with a time delay for a
finite amount of times.
Change-Id: I2031f6e29ae499526cb4f1753e4387e7f4fab0ab
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure to set the author user and email for the temporary git repo,
so that the commits succeed on systems that don't have a global git
author.
Also fix run_process_quiet to print stderr and stdout in case if the
execution failed for some reason.
Change-Id: I0ddb61730114b3e9c59e2d23480df0ced8d6e772
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fixes the situation where we end up with e.g.:
```
target_link_libraries(...
)target_link_libraries(...
)
```
Change-Id: I455563b24850db7f389746385af53cd606343274
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Changes:
- Make sure the footer is passed along to callees
- Make sure RESOURCES are part of add_executable(...) for AUTORCC
Change-Id: I4546bacd2e41ca8acc1a9351af54d325afb715ab
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This commit introduces infrastructure work to allow static builds of Qt
to handle importing of plug-ins.
Change-Id: Ife0ca3ca7276ea8ec96fe0eb6adf934fad7620ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Need
qt_find_package(X11_XCB)
in src/gui/configure.cmake since we're using it in the file
qt_feature("xcb_xlib" PRIVATE
LABEL "XCB Xlib"
CONDITION QT_FEATURE_xlib AND X11_XCB_FOUND
)
Need
qt_find_package(XRender PROVIDED_TARGETS PkgConfig::xrender)
in src/plugins/platforms/xcb/CMakeLists.tx since we're using it in the
file
extend_target(XcbQpa CONDITION QT_FEATURE_xcb_native_painting AND QT_FEATURE_xrender
PUBLIC_LIBRARIES
PkgConfig::xrender
)
Use capital XRender in pkgconfig to be more consistent on how XRender is
called everywhere else
Change-Id: I403ead2cc123b08f741c5142f20db88987657ba8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
qtdeclarative has a few conditions that check the gcc version
via variables like QT_GCC_MAJOR_VERSION.
To handle that, parse the CMake compiler version using
qt_parse_version_string() into separate variables like
QT_COMPILER_VERSION_MAJOR, QT_COMPILER_VERSION_MINOR and
QT_COMPILER_VERSION_PATCH. We can then map the conditions
appropriately.
Also, handle isEqual(foo, bar), which is equivalent equals(foo,bar).
Change-Id: I74575c733b44f1f42451e00038b3f113fd353915
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Hardcode a few cases regarding scopes containing "qtConfig(opengl)".
These arew few, and contain regular expressions, to just manually
check and replace them.
Add a new entry to _qt_library_map for handling QmlModels module.
Fix Scope.children property to recursively access the .children
property on included scopes (instead of just ._children) so that
we get the full list of scopes from included children that include
other scopes. This is needed for nested .pri files.
Fix mapping of "win*" to WIN32.
Change-Id: If949a8051f517683e56cda605733719daadb384a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
The features are reused in qtdeclarative (and maybe somewhere else
too), so they should be present. We can still map the conditions
to proper CMake compile feature tests.
Change-Id: I4d307d29d4d293cc23ab005b195ea346087c7162
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Generate module .pri files
* Generate qconfig.pri
* Propagate MODULE_CONFIG from the .pro files
This enables the basic use-case of simple application builds that for
example use the moc. Omitted from the patch is support for private
module configurations, prl files (should we do this?) and possibly more
hidden gems that need to be implemented to for example support building
Qt modules with qmake.
Task-number: QTBUG-75666
Change-Id: Icbf0d9ccea4cd683e4c38340b9a2320bf7951d0d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
When we replace the PWD key from qmake files and both the base and
current directory are the same, there's no need to add an extra './' to
the current working directory.
This also fixes a unit test in qtsvg as it requires the passed in path
to match exactly to the one outputed in the log files.
Change-Id: Ide9ca6a70493e8039d3af84a9e576d8f6a313f2a
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Added library mapping information for any projects referencing the
QtNetworkAuth project.
Change-Id: I9c4309d26ee9895f94995d4844ffde4ee4444766
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These were some hard requirements while porting QtQml .pro files so
that the generated CMake code is syntactically correct and the result
buildable.
This include handling of a few more different condition scopes
and disabling the c++ make_unique feature test.
Change-Id: Iae875ffaf8d100296e8b56b57d076455e5d72006
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some configure.json files contain new lines inside quoted strings,
which is not conformant with the JSON spec.
Add a new json_parser python module which uses pyparsing to preprocess
the json files to remove the new lines inside the quoted strings, and
then hands over the preprocessed content to the regular json module.
Change-Id: I5f8938492068dda5640465cc78f5a7b6be0e709a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
We constantly had to adjust the qmake grammar to handle line
continuations (\\\n) in weird places. Instead of doing that,
just do a preprocess step to remove all the LCs like we do with
comments, and simplify the grammar not to take into account the
LCs.
From some manual testing it doesn't look like we get any regressions.
Change-Id: I2017d59396004cf67b6cb54977583db65c65e7d3
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
setName() and setDebug() need to be called on a parser element before
the parser element is used as a sub-element in another parser element,
otherwise the debug output is not shown.
Hence the "iterate over all locals" approach works only partially.
Instead add a new decorating function add_element() for the
construction of each parser element, and make sure to enable debugging
inside that function.
Unfortunately there is no clean way to avoid duplicating the parser
element name both in the local variable and in the function argument.
Change-Id: Iaa9ed9b7dbb22ec084070b9c049cf51c841d442c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some qtdeclarative pro files caused exceptions when trying to parse
them using the script. This included the following:
- handling conditions divided by newlines and backslashes
- handling conditions that have no scope
The parser has been fixed to deal with those cases and relevant
tests were added.
After the change, all qtdeclarative project files are parseable by
the script.
Change-Id: Ib9736423f7fb3bcc1944b26cfb3114306b4db9a7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Override the default debug actions to be decorated with proper
indentation for easier reading.
The setup only has to be done once, and not on each QMakeParser
creation.
Change-Id: If5f965b462c782c654ee8ebfdd33570e8f94b084
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Before this patch we enabled AUTOMOC, AUTORCC, AUTOUIC for all targets
that did not opt out.
Aside from being wasteful from a performance point of view,
this also caused issues when trying to build qtimageformats which
does not depend on Widgets which is the package that exposes uic.
To avoid this, enable only AUTOMOC for all targets by default, and
UIC and RCC can be opted in via the ENABLE_AUTOGEN_TOOLS option.
To facilitate this some refactoring had to be done, like moving some
common setup for all autogen tools into a separate call, and making
sure that extend_target understands the autogen options, because some
ui files are only added conditionally.
Also the conversion script has been adapted to output the
ENABLE_AUTOGEN_TOOLS option whenever a .pro file contains at least
one FORMS += foo assignment.
Note that we don't really use AUTORCC while building Qt, so nothing
opts into that at the moment.
Task-number: QTBUG-75875
Change-Id: I889c4980e9fb1b74ba361abed4044737f8842ea4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Handle a few more libraries that are used in qtimageformats repi.
Change-Id: Ia3b9a845bc6cb8ce98a477b9355011bbadc32c1a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The previous fix where the Grammar comment style was changed to
remove the newlines was incorrect, because if you have
foo=1#comment
bar=2
after the Grammar comment ignoring, it would transform into
foo=1bar=2
which will clearly fail to parse, so the new line has to stay.
But we would still have the following case which would fail:
foo=a \
# comment
b
Apparently qmake things that's the equivalent of
foo=a b
but the grammar parses it as
foo=a \
\n (newline)
b
Thus the parsing fails because there's a newline and then some
weird 'b' token which the grammar does not expect.
The best fix I found is to preprocess the source, to remove
completely commented out lines.
So:
foo=a \
# comment
b
gets transformed into
foo=a \
b
Change-Id: I2487a0dbf94a6ad4d917d0a0ce05247341e9b7da
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
It doesn't make much sense to look for X11 related packages on
macOS and Windows by default. Usually they would not be there, and
as a result the configuration step would show a long list of scary
not found packages, and also eat precious configure time.
Change the conversion script to allow putting conditions around
generated find_package calls.
These conditions can be manually set in the conversion script
library mapping, using the emit_if argument,
which we do for the X11 and Wayland related packages.
They are also computed by checking which features use a given library,
and if the feature is protected by a simple emitIf condition like
config.linux, the relevant library find_package call will be protected
by the same condition.
If a developer still wishes to look for all packages, they can define
the CACHE variable QT_FIND_ALL_PACKAGES_ALWAYS to ON.
The relevant configure.cmake files are regenerated in this patch.
Change-Id: I6f918a94f50257ec41d6216305dae9774933389a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
cmdline implies console, so use that also to determine if a binary
should get a GUI flag.
Change-Id: I084e0a45785df96a7dc2c101af5305fbb39efbc3
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
There are still call sites that call Operation.__init__ with a string
instead of a list. Restore the handling of such a case.
Amends 5fe8a38af3
Change-Id: I2a4d5c5cb5b460bf02b6da02d42d8cc8d5eb4192
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
and plugins.
src/network/network.pro for instance depends on core-private, but
because we ignore adding QtCore as a public dependency, the exported
Config file for Network doesn't depend on QtCore anymore, so if a user
only links against Network, they won't automatically link against
Core.
Change-Id: I4a60ffae7e071927360b8ccf6b1b7479ab391060
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
For some reason the python comment regex that we used does not ignore
the line break at the end of a comment line.
This caused issues when parsing multi line assignments with comments
in between.
Use our own regex for comments to circumvent the issue. It was found
while trying to port the qtimageformats repo.
Added a pytest as well.
Change-Id: Ie4bbdac2d1e1c133bc787a995224d0bbd8238204
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Fix test_operations and do some small mypy cleanups along the way
Change-Id: I6586b5d3491e5dcf44252c098516f0922fa60420
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
DBus1 (1.12) configuration file breaks PKG_CONFIG environment
variables and will thus prevent other libraries to be picked up
by pkgconfig. Main sympthom is that xproto is not getting picked
up anymore, which results in hundreds of lines of warnings about
this being printed.
Work around that by wrapping the call to find_package(DBus1) and
restoring the environment.
Change-Id: Ia69f10b014dddc32045b40972500a843e5d29b38
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The pro2cmake.py file is now smarter, and can reapply "special case"
modifications after regenerating a CMakeLists.txt file.
This substantially lowers the maintenance burden when regenerating
many files at once.
See the special_case_helper.py file for details on how it works.
Make sure to commit the generated .prev_CMakeLists.txt file alongside
your CMakeLists.txt changes.
To disable the preservation behavior, you can pass -s or
--skip-special-case-preservation to the script.
To keep around temporary files that are created during this process,
you can pass -k or --keep-temporary-files.
To get more debug output, pass --debug-special-case-preservation.
Fixes: QTBUG-75619
Change-Id: I6d8ba52ac5feb5020f31d47841203104c2a061d8
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Extract code to write find_package lines from configurejson2cmake.py
and move this over into helper.py.
Change-Id: Iefd313b2a56cb78a99a7f3151c3f6c6284482f79
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Separate the logic to find all used libraries from the code that writes out
the link_library information into the CMakeLists(.gen)?.txt files.
This patch will remove some "PUBLIC_LIBRARIES Qt::Core" from generated files.
This is due to us handling some Qt libraries in special ways in some of our
add_qt_* helpers. These special libraries were added to the LIBRARIES section,
but actually they should be added to the PUBLIC_LIBRARIES section instead. Do
so now, so that the newly generated files do not break things again.
Change-Id: I588781087a8aecc4d879e949735671d8085f0698
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extract the actual functionality to write a list of "things" below
headers and/or cmake parameter and followed by a footer.
Reuse this functionality everywhere we write a list of things.
Change-Id: Ia7647be465b4788a2b1e6a5dbede1ca868f24ae2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
