Otherwise they will just use default compiler
Pick-to: 6.3
Change-Id: Id5813b99fbbb6b0d8b0ee658e06312b637a097c1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow such a combination
- staging prefix (CMAKE_STAGING_PREFIX / -extprefix) set to the
qtbase build dir
- install prefix (CMAKE_INSTALL_PREFIX / -prefix / on-device prefix) set
to some custom location
even for non-cross builds.
An example would be
configure -prefix /usr \
-extprefix ~/qt/qtbase_build_dir
CMake will put the Qt libraries in the qtbase build dir, ninja install
will not be required, but ultimately in order to run applications,
the Qt libraries are expected to be in /usr.
Support for this scenario was originally added for cross-builds in
062318feb2 , but not desktop builds.
Such a build is useful when you want to have install rpaths different
from where Qt is initially installed to (the staging prefix).
This case doesn't really happen often when targeting desktop
platforms, it's mostly used for cross-compilation (e.g yocto).
Being able to have the same setup with a desktop build is nevertheless
useful for faster iteration on build system issues in such a scenario.
Amends 062318feb2
Pick-to: 6.2 6.3
Change-Id: I42be3628a30025f14eebaf0a79401b54e95cde26
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Originally, QT_INTERNAL_EXAMPLES_INSTALL_PREFIX was added to
control the installation of examples when they are built as
ExternalProjects, and was not considered for the non-EP case because
we hoped to switch entirely to EP-based building.
Due to some unsolved issues regarding using EP builds in CI, add the
ability to control the installation of non-EP examples.
This will be used in the CI to allow removing the hacky
INSTALL_EXAMPLEDIR and INSTALL_EXAMPLESDIR assignments in example
projects.
It is also likely that we will not deprecate the non-EP based
building, because it is useful for IDE integration (EP targets
are not as developer-friendly to work with in an IDE in regards
to rebuilding).
Amends 98c89c8cc1
Pick-to: 6.2 6.3
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I02264aaa1daa2c80bb9ef3d02b1831b4ca5d2b84
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
to QT_INTERNAL_EXAMPLES_INSTALL_PREFIX so it's clear that the
variable only affects the location of where examples
are installed.
And make sure the paths are passed as CMake paths.
Amends 1031fa1547
Pick-to: 6.2 6.3
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: Ib92c55488b736d980da2bd88255de78e183de824
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
By default when building ExternalProjects, even if the main ninja
invocation has -v passed, that won't be passed to the nested ninja
calls.
When building examples in the CI, we want to see the full command line
invocations.
Allow passing -v to the nested EP ninja calls by configuring Qt with
-DQT_INTERNAL_VERBOSE_EXAMPLES=ON, which we will use in our CI.
We don't want to add -v by default because if the main ninja does not
have one, the nested calls will still be verbose.
Pick-to: 6.2 6.3
Change-Id: Ifd4b312c6eaa7354e8870f4fb0a77fadf0f33ab7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Fix binary_for_strip project not being found when the following
conditions were met:
- building a repo other than qtbase
- qtbase sources are not available on the machine
(usually happens in CI where only the current repo sources are
available).
The issue was that QT_CMAKE_DIR would always be defined, regardless of
which repo was being built and the system would incorrectly assume
the location of the project files.
The fix is to always pick up the sources from qtbase's source dir if
they are available (this time done with an appropriate check),
otherwise use the installed files.
Note that the behavior of always using the qtbase sources if available
is not exactly the best, but it is a more general issue that affects
other code too.
In the name of consistency, make it so for the binary_for_strip
project as well, but add TODOs in code to address the situation
in a separate change.
Amends 39f657032b
Pick-to: 6.2 6.3
Fixes: QTBUG-102064
Task-number: QTBUG-88090
Task-number: QTBUG-101653
Change-Id: I0649f945e9ff0ab1f597c51bb5ab389fa665c021
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Using INSTALL_LIBDIR is the only reliable way to get the library install directory.
Amends: d1c56073b4
Pick-to: 6.2 6.3
Change-Id: Ib8c4fb8b4d339c63209393d7fdb3d1c3425b03a4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MinGW 11.2.0 comes with a strip.exe that strips the ".gnu_debuglink"
section in binaries, a section that is needed for the separate debug
information feature.
binutils version 2.34 mentions the feature for the first time:
https://sourceware.org/binutils/docs-2.34/binutils/strip.html#strip
To ensure the debuglink section is preserved, generate a shell wrapper
that calls the original strip binary with an extra option to keep the
required section.
To determine if the option is supported, we build a real shared library
on which strip will be called with the --keep-section option.
If the option is not supported, a wrapper is not generated and the
stock strip binary is used.
This logic only applies when targeting Linux and MinGW + a shared
library Qt. For other targets, the stock strip binary is used.
Developers can opt out of this logic by passing
-DQT_NO_STRIP_WRAPPER=TRUE when configuring each Qt repo.
Pick-to: 6.2 6.3
Fixes: QTBUG-101653
Change-Id: Idd213d48d087d3c9600c853362aebaba348cde33
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
So we can see the exact moc invocations when debugging issues in the
CI.
For ExternalProject examples, it is conditional on whether Qt is
configured with QT_INTERNAL_VERBOSE_EXAMPLES set to ON, otherwise
calling the main ninja without -v will end up cluttering the output
with AUTOGEN output.
Pick-to: 6.2 6.3
Change-Id: I6468ab0e461b3be283e2428e3515cae4d5986242
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Since e2a0ddbb69 , if Qt is configured
as a non-developer-build, some of the CMake tests that include QtSetup
would have their CMAKE_MESSAGE_LOG_LEVEL set to the reduced NOTICE
value.
Make sure that tests always have a DEBUG level, so that if they fail
in the CI, we have more info on what goes wrong.
For ExternalProject examples, it is conditional on whether Qt is
configured with QT_INTERNAL_VERBOSE_EXAMPLES set to ON, otherwise
calling the main ninja without -v will end up cluttering the
output a non default log level.
Amends e2a0ddbb69
Pick-to: 6.2 6.3
Change-Id: Icd3b6e0fcc6c73e4b53b6c4a6d8354c96077a050
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We shouldn't set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH when
cross-building examples without ExternalProjects.
Instead append the $build_tree_prefix to CMAKE_FIND_ROOT_PATH
and $build_tree_prefix/lib/cmake to QT_EXAMPLES_CMAKE_PREFIX_PATH
to circumvent the usual CMake path-rerooting issue.
This ensures that the build-tree Config files are found by the in-tree
find_package calls when cross-building examples.
Pick-to: 6.2 6.3
Task-number: QTBUG-96232
Change-Id: I4e31f0bf3dbfeb4339823fe09addda3ae83f12c3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
For examples to successfully find not yet installed Config files in a
prefix cross-build, both CMAKE_FIND_ROOT_PATH and CMAKE_PREFIX_PATH
need to be adjusted when toolchain files set
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to ONLY.
Before this change, we lacked two things.
1) If the chain-loaded toolchain file sets CMAKE_FIND_ROOT_PATH
(instead of appending), then the initial value of CMAKE_FIND_ROOT_PATH
that was passed by ExternalProject's initial cache would be
overridden.
2) The prefixes we passed via QT_EXAMPLES_CMAKE_PREFIX_PATH did not
end in lib/cmake, to work around the path re-rooting problem in CMake.
We can handle both of these points by using
QT_ADDITIONAL_PACKAGES_PREFIX_PATH which was introduced for Conan
usage.
Each value assigned to QT_ADDITIONAL_PACKAGES_PREFIX_PATH
gets prepended to CMAKE_FIND_ROOT_PATH by qt.toolchain.cmake AFTER the
original toolchain file is chain-loaded.
And each value also gets lib/cmake appended and assigned to
both CMAKE_PREFIX_PATH and _qt_additional_packages_prefix_paths (used
by Qt6Config.cmake.in to work with find_package + NO_DEFAULT_PATH).
This is exactly what we need to ensure examples build.
Pick-to: 6.2 6.3
Task-number: QTBUG-96232
Change-Id: I11a52457ff795a6661a3a7b68e823e0615d0ce89
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
qtdeclarative has a call like
qt_internal_add_example(imagine/automotive)
This causes issues when trying to pass that as the name of the
external project. Use the last part after the last slash as the name
of the project.
Pick-to: 6.2 6.3
Change-Id: Ifc074e50e537f07f3636699ed255d2561930d873
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Introduce a new QT_INTERNAL_CUSTOM_INSTALL_DIR variable to
allow specifying an 'examples install dir' outside of the Qt prefix.
It will be used in a follow-up change to ensure we don't package
the example binaries in our CI artifacts (thus saving space).
This will be even more important when the examples will contain code
to deploy Qt libraries alongside each deployed example (which would
significantly increase the package size).
Pick-to: 6.2 6.3
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I06b4a8f9e8c57a712a356bca0f5c351a9362bc30
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Change prefix builds to use ExternalProjects to build examples
by default. This will affect our CI which only does prefix builds.
To make it work, we have to do a few adjustments:
- look for Config files in the build-tree (before Qt is installed)
- build only one examples with only a single config,
even if Qt is a multi-config build
- install examples as part of main make install step, rather than
as part of the make step (which is the default for EPs)
- adjust CXX flags when building with MSVC to ensure we can still
use sccache and separate debug info
- derive the correct install prefix for each example and pass it
to the ExternalProject
As a drive-by, add TODOs to address tidiness of the code and corner
cases that likely don't work (Conan).
Amends d97fd7af2b
Pick-to: 6.2 6.3
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I3060da5dc64e7b06052f9dcb720d4d250f876450
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We want to get rid of the INSTALL_EXAMPLEDIR and INSTALL_EXAMPLESDIR
code in each example project.
This was an internal workaround to ensure examples are installed into
a relative path somewhere under $qt_prefix/examples and not in
$qt_prefix/bin or similar.
To achieve that we do two things.
First, deduce the install prefix for each example in the
implementation of qt_internal_add_example (our add_subdirectory
wrapper) and assign it to CMAKE_INSTALL_PREFIX before calling
add_subdirectory. We need to make sure to remove the default
value of CMAKE_INSTALL_PREFIX in the generated
cmake_install.cmake file.
Second, we set an internal variable called
QT_INTERNAL_SET_EXAMPLE_INSTALL_DIR_TO_DOT before the add_subdirectory
call, which will be checked whenever find_package(Qt6Core) is called
in an example project. If the variable is set, the
INSTALL_EXAMPLEDIR var is set to "." in the scope of where Qt6Core
is found.
This ensures that the hardcoded INSTALL_EXAMPLEDIR values in our
example projects are changed to ".".
With both changes, our example project install(TARGET DESTINATION)
calls will now install to
"${CMAKE_INSTALL_PREFIX}/examples/${example_relative_dir}/."
Once all repositories are updated to use qt_internal_add_example
instead of add_subdirectory, we can get rid of the
QT_INTERNAL_SET_EXAMPLE_INSTALL_DIR_TO_DOT workaround.
For repositories that still don't use qt_internal_add_example,
the install prefix rewriting will not happen, but the examples will
still be installed to the proper place because they use their own
hardcoded INSTALL_EXAMPLEDIR value.
Amends d97fd7af2b
Pick-to: 6.2 6.3
Task-number: QTBUG-96232
Task-number: QTBUG-98545
Change-Id: I78c118e10c41b519c570c7d87529afd15aeed900
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Instead of nesting the external project build dir under the current
binary dir, place the EP build dir where it would usually be when we
use add_subdirectory.
Shorten the name of the external project to just ${subdir} instead
of using the relative current binary dir path.
Place the EP prefix and stamp dirs under a new ${subdir}-ep folder
next to the example build dir.
Overall this places example executables where you'd usually expect
them to be, as well as shortens a bunch of build paths to circumvent
path limit issues when building on Windows.
Pick-to: 6.2 6.3
Fixes: QTBUG-94608
Task-number: QTBUG-96232
Change-Id: Ifb921c5a6397385e8a914111bf56ee59cda003fd
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
One for building using ExternalProject_Add and one when examples are
built in-tree by calling add_subdirectory directly.
Pick-to: 6.2 6.3
Change-Id: If4c5301163aefed9f15148a70a8f7014bc817ac0
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
In preparation for addition of new baseline tests, establish a new
test category, "baseline". This is similar to the category
"benchmarks" in that it contains tests that use the QTest framework,
but conceptually are not unit tests, in contrast to those under auto/.
Move the existing QPainter baseline test, tst_lancelot, into this new
category, and rename it accordingly.
Baseline tests use the QBaselineTest extension to QTest. Move that
extension too into the tests/baseline directory, allowing the clean
out of the baselineserver directory.
Pick-to: 6.2
Change-Id: I1b527f5867c953b1d22be73798fcf7d1494712ea
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When building Qt we need to set QT_ANDROID_ABIS value to
CMAKE_ANDROID_ARCH_ABI explictily since the automatical detecting of
android ABI is not executed. This fixes build of the qtbase in-tree
tests.
Fixes: QTBUG-97133
Change-Id: Ica7057bcfcc8f4fe4b5a921ca7449f74cdbca0f1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
In non-prefix builds, we want to prevent users from accidentally running
"cmake --install". We did that by replacing cmake_install.cmake with an
empty file.
The responsible target remove_cmake_install is visible in IDEs, appears
in the build output, and the approach is hacky.
It's cleaner and easier to add bail out code at the top of
cmake_install.cmake. This is now done when calling qt_build_repo_begin.
As a bonus, print an informative message on installation.
Change-Id: I022b36289358ba09cac8b79781f44cd7b93113f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These TODOs were left as a marker to be checked once the official
CMake 3.21.0 release was made. The things they refer to were included
in the CMake 3.21.0 release, so the TODOs can be removed.
Fixes: QTBUG-94528
Pick-to: 6.2
Change-Id: I769605de85df657ad056123e787ec9849b77e42f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Conan CI builds can built a qt repository in a repo-target-set
configuration. An example of that is qtscxml.
When building standalone tests, qt_build_tests includes a repo
specific TestsConfig.cmake file to call find_package on the modules
that were built as part of that repo.
That doesn't quite work with a repo-target-set build which is enabled
when the repo is built with a QT_BUILD_SINGLE_REPO_TARGET_SET value.
The TestsConfig.cmake file would be overridden with different contents
on each configuration.
Fix that by including the QT_BUILD_SINGLE_REPO_TARGET_SET value as
part of the TestsConfig.cmake file to be generated and included.
This means that when configuring the standalone tests, the same
QT_BUILD_SINGLE_REPO_TARGET_SET value should be passed, so that the
correct packages are found.
Add some debug statements to allow checking which TestsConfig.cmake
file is loaded when the standalone tests are configured with
--log-level=DEBUG.
Adjusts to 4b09522c23
Amends de3a806def
Amends e7f188b2d2
Pick-to: 6.2
Task-number: QTBUG-96253
Change-Id: I7c22aaad88fe8e6fce23046543363316203f6e8d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We default to configuring examples as separate ExternalProjects when
using a developer / non-prefix Qt build.
This ensures we test that the examples configure successfully without
the pollution of the main Qt build (e.g. already found packages).
One down-side of this is that a developer's IDE doesn't see these
example targets, unless each project is loaded into the IDE
separately. This is cumbersome to do when refactoring or renaming
code across multiple example projects.
Allow configuring the example projects as part of the main Qt build
by setting QT_BUILD_EXAMPLES_AS_EXTERNAL to FALSE when configuring Qt.
Save the value of the variable in QtBuildInternalsExtra.cmake.in
so it's propagated to leaf repositories as well.
Amends dab8f64b6d
Amends d97fd7af2b
Task-number: QTBUG-90820
Task-number: QTBUG-94608
Task-number: QTBUG-96232
Task-number: QTCREATORBUG-26168
Pick-to: 6.2
Change-Id: Ie1f724f74365b3a788b04c3fffe9eb2d0611dd50
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In top-level builds, when configuring qtsensors, the directory of
FindWMF.cmake isn't in ${CMAKE_MODULE_PATH}, this makes CMake couldn't
find WMF.
On Windows, QtMultimedia requires WMF. If WMF couldn't be found,
QtMultimedia will also be treated as NOT FOUND.
QtSensors has an optional dependency to QtMultimedia. If QtMultimedia
couldn't be found, CMake will warn.
Copy Find*.cmake to ${QT_BUILD_DIR}/lib/cmake/Qt6, to make sure these
files could be found by CMake.
Fixes: QTBUG-95655
Pick-to: 6.2
Change-Id: I87d14c9a7becd0ec493e00c297b2e01fc0ad0f96
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Building a shared library Qt configuration already required a minimum
CMake version of 3.16, because we depend on CMake's Autogen.json files
which are used for metatype.json file generation.
If a lower version was used, a FATAL_ERROR was issued in
qt6_extract_metatypes.
This change is essentially moving the check to happen earlier in the
qtbase configure process.
User projects will now /also/ officially require a minimum of 3.16
(up from 3.14).
As a consequence, the min/max version policy range that is set in
the public QtFooConfig.cmake files is changed
from 3.14..3.19
to 3.16..3.20
The upper bound is raised because building and using Qt works fine
with all CMake 3.20 policies set to NEW.
[ChangeLog][CMake] Building Qt as shared libraries now requires
CMake version 3.16 or later. Building user projects with CMake using
that Qt installation also requires a CMake version of 3.16 or later.
Pick-to: 6.2
Task-number: QTBUG-95018
Change-Id: I77d2829370f1dfc90b4071bebc8a3ade654e59e6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
target_link_options are placed by CMake at the beginning of a linker
line. This gives us an opportunity to use the function to propagate
object libraries. This change adds one more check in the root
Config.cmake file. If CMP0099 policy is enabled, CMake enables
propagating of the linking options when linking two static libraries
using the PRIVATE linking visibility, so we can rely on the correct
linking order and expect object libraries to be propagated.
Note that on the platforms where cmake version is higher than 3.16
Qt uses CMP0099 NEW in functions like qt_add_executable. This means
that at the moment of creating an executable target the TARGET_POLICY
genex will also be NEW, so we do not take into the account the user
defined CMP0099.
If the CMP0099 policy is not available for a certain CMake version
we skip the TARGET_POLICY check and simply disable propagation of
the object libraries using target_link_options for both user and Qt
libraries. This is applicable for the CMake versions 3.16 and less.
Linking approaches have the following priorities(from higher to lower)
after this change:
- target_link_libraries - works if link order matters not or CMake
version greater equal 3.21.
- target_link_options - works if CMP0099 is set to NEW by user or
if the CMake version is greater than or equal to 3.17 and an
executable is created using Qt functions.
- object library finalizer - works if CMake version is greater equal
3.19 or qt6_finalize_target is called explicitly.
- target_sources - is used when all the other approaches could not
be used.
Amends a1fd4f51ad
Amends 3329212815
Pick-to: 6.2
Change-Id: I14f88caeb04e357191c840abeab89b03e210b796
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove target specific flags from static_link_order.
Move the check to the common config.tests folder.
Amends 5fb99e3860
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: I1368075ec6bd1e743b2b89fd93143df38a278ec2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only depend on the ${project}_src and ${project}_tools targets.
This might exclude some non-obivous target dependencies, but we can
adjust that if needed.
This reduces the build.ninja file of qtbase + qtsvg form 341MB
to 41MB when configuring with tests and examples, as well as reduces
the processing time of calling ninja.
Amends d97fd7af2b
Pick-to: 6.2
Change-Id: I2860d8ae89728f33f6b73fede1335cd6d6290f78
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For user projects we run the static link order check once
'find_package(Qt6 ...)' is called.
If linker can resolve circular dependencies between static libraries
and object files we set the _qt_link_order_matters property of the
Qt::Platform target. This indicates the use of finalizers is not
required and we may rely on CMake-base propagation of resource
libraries and resource object files.
If linker could not resolve circular dependencies depending on
the _qt_resource_objects_finalizer_mode value:
- Finalizer will be called and collected resource objects will be
linked to the target directly.
- Finalizer will be omitted and resource objects will be linked
using the target_sources function implicitly. This only
propagates resource one level up if consumer links the static
library PUBLICly, but all symbols will be resolved correctly
since object files are placed in the beginning of the linker line.
In the CMake version 3.21 we expect that CMake will take care about
the order of the resource object files in a linker line, it's
expected that all object files are located at the beginning of the
linker line.
TODO: Need to confirm that the CMake 3.21 meets the expectations.
Amends 4e901a2f99
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: Ia68976df8182d3d3007b90c475c1e3928a305339
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change allows temporarily removing the EXTERNAL_BUILD option in
a qt repo examples project to check how the examples behave in a
non-external project build, without forcing the developer to use a
prefix build.
Useful to compare behavior until we've ported over prefix builds to
use EXTERNAL_BUILD.
Amends d97fd7af2b
Change-Id: I29b834bb5f00e1e93966caae6f816faedba76b76
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
'ld' only capable to resolve circular dependencies by wrapping the
suspected static libraries and objects using --start/end-group
arguments. We want to detect if linker is 'ld' at configure time to
decide how to link the resource objects if finalizers are not enabled.
The qt_config_compile_test function is extended with an extra argument
since it's required to pass custom cmake flags to the ld-related test.
Pick-to: 6.2
Change-Id: I484fcc99e2886952d8b0232f37e4e6a35d072931
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This means calling 'ninja apk' in a Qt build with examples configured
will build all example apks, regardless of whether the examples are
built as external projects or in-tree.
Fixes: QTBUG-94264
Change-Id: I5c7af0354858898a2e154a6d54fb025e4d81ff80
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Examples are intended to show how to build against an installed Qt.
Building them as part of the main build means the way the Qt targets
are defined and created are not representative of an end user's build.
By building them as separate projects using ExternalProject, we can
more closely replicate the intended audience's environment. This
should allow us to catch more problems earlier.
Having examples built as part of the main build also creates problems
with some static builds where a tool built by the main build is needed
during configure time. This happens with other repos like qtdeclarative
but not (currently) with qtbase. Converting the examples in qtbase to
be built using ExternalProject is intended as a demonstrator for how
other repos can do similar. Until other repos are converted, they will
continue to work as they did before, with examples as part of the main
build for non-static builds only.
The new build-externally behavior is only supported for non-prefix
builds with this change. Prefix builds will continue to use the old
non-external method. Support for building examples externally in
prefix builds will be a separate change.
Task-number: QTBUG-90820
Fixes: QTBUG-91068
Change-Id: I2304329940568dbdb7da18d54d5595ea7d8668bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce the concept of repository target sets, which is a named set of
targets within a Qt module repository.
In a Qt repository, a repo target set 'qtfoo' can be defined in the
top-level project file with
qt_internal_define_repo_target_set(qtfoo DEPENDS Bar Baz)
The DEPENDS argument specifies Qt components that need to be
find_package'd when building the targets that belong to qtfoo.
In subdirectory project files, use
qt_internal_include_in_repo_target_set(qtfoo) to mark the file as
belonging to the repo target set.
To build and install a single repo target set, specify
QT_BUILD_SINGLE_REPO_TARGET_SET=qtfoo when configuring the Qt
repository.
Change-Id: Ic9e6213e3225988fd561f315bc857ee44ff17420
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Sometimes projects don't follow the standard directory layout, so they
end up copy-pasting the guts of qt_build_repo and adapting that.
Split the macro into smaller ones so it's easier to reuse.
Change-Id: I8cc72ba2a2eaf58afd44950b3ac78378b7b1fdfd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Currently in order to compile a Qt6 test standalone one needs to use
the qt-cmake-standalone-test script which will load the
Qt6BuildInternals/QtStandaloneTestTemplateProject/CMakeLists.txt project
with the current test source directory to create a complete CMake project.
This commit will allow a test to have these lines at top:
cmake_minimum_required(VERSION 3.16)
if (NOT QT_BUILD_STANDALONE_TESTS AND NOT QT_BUILDING_QT)
project(a_qt_test LANGUAGES C CXX ASM)
find_package(Qt6BuildInternals COMPONENTS STANDALONE_TEST)
endif()
and be standalone and work with any IDE capable of loading CMake projects.
Fixes: QTCREATORBUG-25389
Pick-to: 6.1
Change-Id: If3f878b7e560a8bfbb604a8f1aa30b7962742e66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The directory-level targets missed the first level of sub-targets.
E.g. `qtbase_qmake` did not have a dependency to `qmake`.
Fix qt_build_internals_get_repo_targets to first grab all targets of the
subdirectory and then recurse.
Pick-to: 6.1 6.0
Change-Id: I3604000caec22fac9a4cc5f5aaf651d550d16793
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Homebrew introduced a new default prefix for Apple Silicon machines,
so that both arm64 and x86_64 packages can be co-installed on a single
system.
The intel packages are installed into /usr/local and the arm64
packages are installed into /opt/homebrew.
For Qt building purposes, we don't want to find packages in any of
homebrew's prefixes unless explicitly requested by the user
Currently our arm64 macOS CI config does pick up system libs under new
prefix.
Remove the new path from the system prefixes.
Amends f3c7d22dd0
Task-number: QTBUG-85447
Change-Id: I381d31c95bcdab26147a331444ba40c7af9d0a95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building and installing a Qt repo that provides plugins for a Qt
module within a different repository (for example, qtimageformats
providing imageformat plugins for QtGui), re-configuring that repository
would result in configuration errors like
"add_library cannot create ALIAS target "Qt6::QTgaPlugin" because
another target with the same name already exists."
This happened, because the find_package(Qt6 COMPONENTS Gui) calls pulled
in the Qt6*PluginConfig.cmake files that create imported targets for the
plugins we want to build.
To fix this, when building Qt, we now load only plugins that are
provided by repositories the currently building repository depends on.
We read the repo dependencies from dependencies.yaml when the
Qt6BuildInternals package is loaded, but only in static builds and only
if we're currently building a Qt repository.
To find out whether we're building a Qt repository, we check whether
QT_REPO_MODULE_VERSION is defined. We cannot check QT_BUILDING_QT,
because that variable is not available for the first find_package calls
in the repository's top-level project file.
In each Qt6*PluginConfig.cmake file, we bail out if the plugin's
repository is not one of the ones in QT_REPO_DEPENDENCIES.
Fixes: QTBUG-86670
Fixes: QTBUG-91887
Change-Id: I8f6c8398032227032742f1ca019e983ff2bcd745
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In shadow per-repo builds we never hit the code that is supposed to
install cmake/Find*.cmake files. This caused problems when statically
building a Qt repo like qtshadertools against qtimageformats which
provides such Find*.cmake files.
Fixes: QTBUG-91538
Change-Id: I1147daee817ac71303d93e8bf368b2769afb0bb4
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In QtSetup.cmake the PROJECT_VERSION_MAJOR variable was used to
identify prefix of 'Qt<version>HostInfoConfig.cmake'.
Qt<version>HostInfo is not found, if project version differs
from qtbase version.
Move the 'INSTALL_CMAKE_NAMESPACE' and 'QT_CMAKE_EXPORT_NAMESPACE'
variables to 'QtBuildInternalsConfig.cmake'. In this case
variables will be exposed for a wider list of internal routines.
Use the 'INSTALL_CMAKE_NAMESPACE' variable as prefix to find
Qt<version>HostInfo module.
Fixes: QTBUG-90345
Change-Id: Ic595d1c5beb74f34e69b58e18590a3afc2f346f7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QtBuildInternals config package file gets processed before feature
evaluation occurs. That means INPUT_pkg_config may be defined, but the
corresponding FEATURE_pkg_config variable won't have been set/updated
yet. Do this check locally because the availability of a number of
features is conditional on whether pkg-config is available.
Change-Id: I6030eb380ee0c630ffbe5db5eed397a46227c7f6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt-cmake-standalone-test would be looking for the config files under
the target machine install prefix instead of under the staging prefix
on the build host.
Change-Id: I29850af6d8fe502f4944f689ec10539d17ccdcb9
Pick-to: 6.0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Disabled by default as they are currently not being built and many are
not working properly, this will allow us to start using them again.
Change-Id: I823368d04e9fde2beccabedc3ca15efd1f355bfb
Pick-to: 6.0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add custom targets with '_benchmark' suffixes to make run of
benchmarks using generators possible, e.g.:
$ ninja tst_bench_qudpsocket_benchmark
Extend '-[no]make' option to pass benchmark. Rework
'-[no]make' processing to unify these options processing.
Also looks like it doesn't make sense to enable benchmarks without
having test enabled. So '-DQT_BUILD_BENCHMARKS' enables test as own
dependency automatically.
Task-number: QTBUG-89076
Pick-to: 6.0
Change-Id: Ieee9eadaf6d75a1efec120242d6eb786ace1b071
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a CMake release introduces a new policy that affects most Qt
modules, it may be appropriate to make each module aware of that newer
CMake version and use the NEW policy without raising the minimum CMake
version requirement. To reduce the churn associated with making that
change across all Qt modules individually, this change allows it to be
updated in a central place (qtbase), but in a way that allows a Qt
module to override it in its own .cmake.conf file if required (e.g. to
address the issues identified by policy warnings at a later time). The
policies are modified at the start of the call to
qt_build_repo_begin().
For commands defined by the qtbase module, qtbase needs to be in
control of the policy settings at the point where those commands are
defined. The above mechanism should not affect the policy settings for
these commands, so the various *Config.cmake.in files must not specify
policy ranges in a way that a Qt module's .cmake.conf file could
influence.
Starting with CMake 3.12, policies can be specified as a version range
with the cmake_minimum_required() and cmake_policy() commands. All
policies introduced in CMake versions up to the upper limit of that
range will be set to NEW. The actual version of CMake being used only
has to be at least the lower limit of the specified version range.
This change uses cmake_minimum_required() rather than cmake_policy()
due to the latter not halting further processing upon failure.
See the following:
https://gitlab.kitware.com/cmake/cmake/-/issues/21557
Task-number: QTBUG-88700
Pick-to: 6.0
Change-Id: I0a1f2611dd629f847a18186394f500d7f52753bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
