linuxinput becomes evdevmouse. The experimental touch code is removed,
now the plugin's purpose is solely to generate mouse events from
absolute and relative pointer events. The plugin key is EvdevMouse.
touchscreen becomes evdevtouch. The plugin key is EvdevTouch.
In case keyboard support appears some day, it will fit nicely in the
system by the name of evdevkeyboard or similar.
Some little udev code is moved to platformsupport so it can be shared
between the plugins. This may be extended later if more sophisticated
udev support is needed. N.B. the intention is to keep this as simple
as possible. We are shipping these plug-ins as reference examples, not
as full-featured drivers.
evdev and udev support has configure time tests from now on. This
means the "drivers" (generic plugins) will get built automatically
when the support is available.
Change-Id: Iaf6260b5c2edfb9f25d070d2764466725adc6b4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Recent commits in src/corelib/arch have removed empty directories,
which cause configure to assume that the architecture is not supported.
This assumption is wrong, due to changes in
src/corelib/thread/qbasicatomic.h to include the correct QAtomic*
implementation based on compiler pre-defined macros instead of the
architecture found by configure.
Change-Id: I026958fb9af8af62e295e68a4643c37ac9395dc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QNX implements the POSIX version of iconv (with non-const function
signatures). However, it is still necessary to link with libiconv, unlike most
cases. Also, its iconv_open does not know how to handle an empty string.
Change-Id: I8654703e46b9c64503aca5521ce7fae1c97d7968
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For shadow builds configure creates syncqt script to shadow build
directory tree calling the original syncqt from qtbase source tree.
This wrapped script will add two default parameters when calling
the original script. Both parameters are overridden in
qtbase/mkspecs/features/default_pre.prf and are not needed except by
configure script itself in latter stages where the parameter should be
applied explicitly in shadow build condition branch.
In addition, it adds the qtdir parameter for the forwarded syncqt call to
indicate the location of qt sources for the syncqt. This also will give
correct qmake path for qtmodule-configtests script triggered from syncqt.
Changes are done both for Linux and Windows configure.
Change-Id: I307b2e76c203ee14b849f10ff629f9668da2f223
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This removes the options to disable several modules, as they are in
separate repositories now and can be "disabled" by simply not compiling
them.
Note that this leaves some configuration options for these separate
modules in, as they have no own configures. This is ugly, but has to
stay that way for the time being.
Some other dead code had to go as well, just like accepting the obsolete
-qdbus option.
Change-Id: Ibb26e4f48ca8239c2c4396e4abefab4c87322be2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added PCRE config.tests, and logic and command line options
(-qt-pcre and -system-pcre) for configure and configure.exe.
Change-Id: I5da2658191198dbcf48c07d7c5de1be1b884a7a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The new atomic implementation chooses which header to include based
on what #define's are set by the compiler (i.e. __x86_64__ or
__i386__). Because of this, the qatomic_macosx.h header isn't used
anymore. This also means that the configure script does not need to
use or look for this file anymore, it should just use the normal
uname -m detection.
Change-Id: Ibf275488735483268286196952299c0e496dfd1f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When set in configure it would be written to .qmake.cache and would only
apply when building Qt. We then had an override (that was also out of
sync, version-wise) in the g++ mkspec, which would also apply to apps
building agains Qt. This override did howerver not apply when using
the Clang mkspec.
We now move setting macosx-version-min to the common macx mkspec, shared
by both g++ and Clang, which will apply both when building Qt and when
building something against Qt. The latter since an application built
against Qt will not deploy on versions of Mac OS earlier than 10.6
anyways, so we might as well always set the minimum-version.
The modifications to the mkspecs will result in macosx-version-min
being passed twice when compiling qmake, as configure writes its own
makefiles and the mkspec parsing in configure has a bug where it will
lazily evaluate qmake-variables instead of evaluating them inline. This
is not a problem, and can be fixed in a later patch if seen fit.
Change-Id: Ib29503ad00a9dc00e0a50b0dbd9459e89a20dfbd
Reviewed-by: Zeno Albisser <zeno.albisser@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Qt doesn't use iconv on Windows, but configuring it will appear to
work and the build will complete. The result is that character
set conversions do not work.
Configure.exe already disables iconv for Windows.
Change-Id: I449a00860c2e77e6cdd8cdcf7108621c684207bf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qt 5 will support single-arch builds only, for two
reasons:
1) PPC is very deprecated at this point, x86_64
is becoming standard.
2) V8 only supports single arch builds.
As a workaround, build twice and use lipo to
create universal binaries.
This commit also removes the -cocoa and -carbon
options.
Change-Id: I428f096a02f59ec2b3e693150e0e08358198de83
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It's only used by Maemo and Harmattan, thus not needed in Qt5.
Change-Id: I8638f4fc63637be88d1aa584cde7e3a4116f2de6
Reviewed-by: Alex <alex.blasche@nokia.com>
At the moment users of Qt must detect if it was compiled with SSL
support by testing for QT_NO_OPENSSL. This means that any code that is
conditionally compiled this way is tied to the presence of the openssl
backend. This commit makes it possible to implement new SSL backends
during the Qt5 lifetime without breaking this code. People can still
test for QT_NO_OPENSSL if they really need openssl, but if they simply
want to know if there's SSL support at all they should use this define
instead.
In addition, this commit changes the public API headers to use the new
define.
Change-Id: Ib57a71aa65836ac9351f120a487bfeb8009d9515
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Prevents build errors when xrender is not present.
Change-Id: Ib80d52109dd0bcd63ba865c5f6e143961f3c20e6
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
There's no good reason to still differentiate between 'Nokia' developers,
and Qt developers outside of Nokia, inside configure. Just use
-developer-build -opensource -confirm-license.
Change-Id: I8726947dae0c70412eb52bf9d88eda4aa061ef26
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These should go into qmodule.pri, rather than .qmake.cache, as they
make sense for all Qt modules - not only qtbase.
Fixes link failure when building qtdeclarative with jom on Windows.
Change-Id: I3e8b207e1808cb23af58b865a160c2fafa906288
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
In a Qt 5 world, these have no relevance, so remove them.
Task-number: QTBUG-23022
Change-Id: I2f52c7aa1fcb8234046dd95b4d702791d20514fa
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This malloc-replacement library is marked experimental and disabled by
default. It is also Unix-only.
On linux (GNU C library, actually) ptmalloc graduated to become the
native allocator, according to its webpage (http://www.malloc.de/en/),
making the need to have a copy here significantly lower.
Anyway, there is nothing preventing interested parties from adding this
library to their own setup and very little value in keeping it around in
qtbase.
Change-Id: I2b1c798ca38b59bb767b44d6e5190080ec6ecdf4
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
reduce-relocations will enable the -bsymbolic-functions
linker option when supported by the linker. This
reduces the amount of relocations required within
a shared library, by binding symbols locally where
possible.
Change-Id: I00ddc408df79097857d6b36f7fc1b0f510362fcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add mips to the list in configure and the v8.pri, build the existing
MIPS files. The result has not been verified to work.
Change-Id: I0f4fd29cd9752d32b6d87e0df0e888822f40ac0a
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A V8 snapshot is a serialized representation of the JavaScript heap.
Using a snapshot can vastly speed up V8 initialization.
This commit introduces a new tool, mkv8snapshot. mkv8snapshot is
automatically invoked as part of building QtV8, and generates a .cpp
file which is compiled into the QtV8 library.
Because mkv8snapshot itself needs to initialize the V8 environment
the non-snapshot way (i.e., by evaluating thousands of lines of
JavaScript), it needs to build all of V8. This means that V8 is
effectively built twice when snapshots are enabled.
When cross-compiling, only host=i386 and target=arm is supported,
since that's the only relevant case for which V8 currently
supports a simulator. mkv8snapshot is built and run as a host tool
(using the simulator), and generates a snapshot that will be used
on the target.
Task-number: QTBUG-21152
Change-Id: I9270652f129505508f78db8b0a39fbf57dc8b86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make the indentation sensible.
Remove comments which merely repeat the name of a variable on the next
line.
Change-Id: Ic3ecaaaba61795aeee10299ee44523eb725ecad9
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To instrument a Qt application or library with the TestCocoon coverage
tool, do `CONFIG+=testcocoon' in the application .pro file.
To instrument Qt itself with testcocoon, use the `-testcocoon' configure
option.
Change-Id: Ie77109a078d11ea51f7a073621e0df9c752c44ae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
We have the following scenario: Either you build a release package
without asserts, or a debug package with asserts. However, in embedded
development, we need asserts also in release packages. This flag allows
you to build a release package, but Q_ASSERTs still fire.
Change-Id: Icd1dd4dd63c3cafecf515b40741263d902ad42d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of adding them to all C*FLAGS. This makes it
possible to pass -Wno-warning-name to configure to disable
certain warnings enabled by default (which didn't work
previously). This also has the added benefit that only projects
that have CONFIG+=warn_on will get the extra warning flags.
Change-Id: I7bbc100155e02e7ccb9ac3be14bd8f585b7bc39b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These will be passed on as extra C*FLAGS to the Qt build. Useful for
adding -Werror or -Wno-something-or-other.
Change-Id: Ifbbf63261573edd024de951082d99658eb443a3f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Remove Trolltech from the default install path.
Since QPA is the default now, so we don't need to treat it
specially from regular Qt versions. It is the regular
Qt version.
Change-Id: I0bde75c90d2d5944be192e1249bc1a9371c70fcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Proper multipoint touch support was only introduced in XInput2.1, but Harmattan uses
a tweaked version of XInput2.0 that transfers touch data through mouse events.
This patch applies on the xcb plugin a subset of the changes that were applied on the
Qt 4.7 that was shipped to Harmattan to get similar multipoint touch support.
Change-Id: Ifda7ad40de29d7ded1443d4f78b3ec3807303a9f
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Using the first pkg-config in PATH is prone to errors when
cross compiling. This is a known issue, and `configure' already
avoids using pkg-config for cross compiling (unless -force-pkg-config is
used). However, there was previously no way for a .pro file to test
whether or not the user had passed -force-pkg-config.
Let !contains(QT_CONFIG, no-pkg-config) be used to test whether or not it
is safe to run pkg-config.
(cherry picked from commit 53794d94994cb3149581b1a91762dfa2d6defac0)
Change-Id: I53794d94994cb3149581b1a91762dfa2d6defac0
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-on: http://codereview.qt-project.org/6488
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If Qt is built without QtConcurrent, the relevant autotests should be
excluded from the build, rather than building empty tests that appear
to pass and thus produce confusing test results.
Change-Id: I43bafcb0ffa42e8981bec4e27bf6a23a28d86df9
Reviewed-on: http://codereview.qt-project.org/6395
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Passing -no-xcb or -no-wayland was enough to get a build with neither
but the error message says you need to pass both. Fix the logic.
Change-Id: I2d554d371b603e7df7bc07e1b4d5271ba31243f0
Reviewed-on: http://codereview.qt-project.org/6099
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Require the user to pass -no-xcb and -no-wayland in order to produce
a build that has only the minimal plugin available.
This prevents "useless" builds from being accidentally created.
Change-Id: If2f7f516a52b75998f3ae7bf802f89f93f6e8218
Reviewed-on: http://codereview.qt-project.org/6005
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The * was not appearing against the default for the -xcb switch because
of a spelling mistake.
Change-Id: I3491cc9772d02179711b0d474db7ab2ef2398e88
Reviewed-on: http://codereview.qt-project.org/6003
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
