It's unstable on all platforms, because the reply can be finished
due to a race with the http thread. It isn't crashing (which the
test was trying to test for), but rather the QVERIFY(!reply->isFinished())
fails, which is an inconclusive verdict.
Change-Id: Ib815a7cedd220544a0c9cb83023e3334df4a0fb3
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The metatypes are registered in the constructor, don't need to
register them in test cases as well.
Registering in a test case is bad practice, as it could result
in tests failing when run individually due to unknown metatype.
Change-Id: Ic4d65d0f5fe3cdd3ab57cf2512a4906d71205a05
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The test case that depends on QLocalSocket consistently fails due
to bugs in QLocalSocket windows implementation
Change-Id: Ibfe9eb3590be4f72b52f14cd4fbe5be61f6cf70e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The test was testing the wrong thing, and passing even though
QNetworkRequest::AuthenticationReuseAttribute was not being
respected, until recently when I fixed username/password in URLs
Now the cache is properly bypassed when this attribute is set to
manual, and the autotest is updated to check this.
Change-Id: I87943515562d0b16b03504f0758ba265758d1c22
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Expiration date is calculated from max-age header when a response is
inserted into the cache. Because the test case is prepopulating the
cache outside of QNAM's control, the expiration date was uninitialised,
causing the test to fail.
This is due to a 2 year old change in QNAM, where max age calculation was
removed from cache retrieval, and more recent changes to QDateTime
where secsTo() returns 0 if one of the arguments is invalid.
Change-Id: Ieecd46123dde4ca0fd0be3ae79e70e1528ec02bc
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Only test code change, we already have the correct behaviour
Task-number: QTBUG-20001
Change-Id: I2296f405f47f9c8d15796e69f9d1854063e38d6a
Reviewed-by: Richard J. Moore <rich@kde.org>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
QNetworkAccessManager was ignoring the supplied credentials, although
webkit seems to support these urls at a higher level.
Following the behaviour of browsers:
We use supplied credentials if authentication is required.
We add supplied credentials to the authentication cache.
We emit authenticationRequired signal if the credentials were wrong.
We do not use previously cached credentials for that url
Synchronous http requests fail, if the credentials were wrong.
Task-number: QTBUG-18107
Change-Id: If46e8eab1511ba8a0f4bbe0d4efaabc4df0b8ab4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- made subdir test depend on echo
- remove SRCDIR and changed to use TESTDATA and QFINDTESTDATA
- added waitForFinish() to handle slow networks
- removed core module header from echo subprogram and replaced
with needed header only
- Added ipv6 skip to connectToIPV6Address() if not available
- Added check QT_BUILD_INTERNAL and skip tests if backend
not available
- Skip permission tests if run as root
- Removed win32 debug and release directory locations so that
application is in known location relative to test data
Change-Id: I58c3c2fca3cd2fee72fdb81d016bb4fd7fe08ac2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
An old coding error meant that the C runtime abort() function was
being called instead of QFtp::abort() when cancelling an FTP download
using QNetworkReply::close()
Task-number: QTBUG-22820
Change-Id: Ib97fda9769b2b55a08c042c66c4444cb6216d2b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Marked two tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qnetworkreply
- tst_qsslsocket
Task-number: QTBUG-24203
Change-Id: I9647833bf15fe5a340d7ef59e1dcb007a92677dc
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The QNetworkReply finished signal does not have a bool parameter.
Change-Id: I87bd0410545f7a2fc2ab63cca90548f0585bf7a0
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QNetworkCookie doesn't need to know about QNetworkCookieJar and for
QNetworkCookieJar header a forward declared QNetworkCookie is enough.
Change-Id: I21145ce0f67a0a6bd68a46a5e757f82105cdf520
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
All references to QFtp in documentation have been removed, QFtp's
documentaiton was marked internal. The QFtp example was removed.
Task-number: QTBUG-23199
Change-Id: Ifff83cac069fb350e8ebeae63e605850e65c0c30
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QHttpNetworkReply crashed in Qt4.7 and 4.8 if a HTTP server responded with
gzip-encoded empty content without defining Content-Length in the response
header. This commit adds the test for the problem as a regression test to
Qt5.
Change-Id: Iddfb970a31d92a66fd1dd524811cf54bb06e5157
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The data file named "trolltech" has nothing specific to Trolltech in its
contents. Rename it to "testhtml". The lack of a file extension is
intentional.
Task-number: QTBUG-19653
Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a regression caused by the NTLMv2 authentication patch.
I have manually tested NTLMv2 authentication against MS IIS and reverting
these two lines does not break it.
Task-number: QT-5209
Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Test the authentication cache works properly with "cancelled dialogs"
or if the user enters username/password incorrectly.
Expected behaviour is based on web browsers:
If cancelled, current request fails, and prompt again the next time.
If wrong password is given, prompt again and retry the current request.
If bad credentials are in the cache, prompt again
Task-number: QTBUG-22875
Change-Id: Ic02ccac8dbeb3f2580ca4ffe47d0773982c4ab25
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The "happy eyeballs" connection code means that IPv4 and IPv6 connections
are both attempted for a http request.
For a normal http server, this is no problem, but the MiniHttpServer in
the test code is very simplistic and cannot cope with more than one
client connected at the same time.
On windows this causes all these tests to fail with timeouts.
Changed the MiniHttpServer to listen on IPv4 only instead of Any address.
Change-Id: I81e249997d894d266001da474a351b1f5642599e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Two problems:
- The signal cacheCredidentials was not connected in the synchronous
case while it must be connected. (Regression when the threaded http
was merged)
- We cannot cache the credidentials when we proceed the url because
at that point, we do not know the realm (this basically reverts
9bc5a32b875b812c3a706034c8c27614f86bd138)
Task-number: QTBUG-18411
Change-Id: I8ea11fa23db4314c3f17ed06d2d7f9ee934ccdba
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Due to clearAccessCache being made part of the public API in Qt5,
this autotest can be run on normal Qt builds again
Task-number: QTBUG-17312
Change-Id: I3b70237a28ed141ffb49762cc40c8a528f9be6a8
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The DEPENDS_ON macro didn't do anything and has misled many users to
think that they can write test functions that depend on other test
functions.
Task-number: QTBUG-21851
Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The reference file has suffered whitespace changes during the cherry
pick from 4.8. Refetched from the test server.
Change-Id: I03a0b7a66cf6743de3391905422b2f4cdcd86dcf
Reviewed-on: http://codereview.qt-project.org/6454
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This is in order to have a regression test for QT-5304.
However the test is also checking basic functionality of head
requests too.
Task-Number: QT-5304
Change-Id: I0d98bd1f1125ffd49d9f3c859a51b2aaee95379a
Reviewed-By: Martin Petersson
Reviewed-on: http://codereview.qt-project.org/6033
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a
Reviewed-on: http://codereview.qt-project.org/5941
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
