Otherwise, the code triggers for top level windows in setups with
multimonitors where the primary screen is on the right and the left
monitor has negative coordinates.
Task-number: QTBUG-43879
Task-number: QTBUG-38475
Change-Id: Ied3ee6dc59bd784e11db22031d2090cc6f42ef8b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Terminating the scan thread is leading to crashes. So was the previous
solution to use wait(5000), since the scan thread may take longer than
that.
Task-number: QTBUG-36000
Change-Id: I5c37ba5ba3f5c156fca30f3dacaa998c15f76be8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
In MenuBar.qml, it's possible for __isNative to be set
after visible on a child QQuickMenu. In that case, the qcocoamenu.mm
will have set submenu to nil, only to be overridden in insertNativeMenu
when __isNative is set.
Change-Id: Id3c6bca03f937528d05b166cbd6a6d1011db43e8
Task-number: QTBUG-44168
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Assign geometry in setGeometryDp() only when minimized as otherwise the
variable will be set by the handling of the resize event triggered by
setGeometry_sys()handleGeometryChange(). As it is, it suppresses
the emission of screen change signals for programmatic move operations
since the move is not detected.
Change-Id: I5cd32bb16fd41dd720c16ddf84b88df642677af7
Task-number: QTBUG-44070
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Add some parts of the qtdiag tool as a qtbase test to output the
graphics configuration to the CI log and to verify that Open GL can be
initialized for platforms on which the qopengl test is marked as
insignificant (for example, ANGLE).
Change-Id: Id445e57928e0307ad38cd433c52a62501f1097c6
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
CppCat detected duplicate sub-expressions in the code that checked for
BottomLeftSection and BottomRightSection. It was fairly obvious to
see what the values should be.
Change-Id: Id45ca5bbd26c92b800c60867fef5170578216eee
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
There were several leaked CFStringRefs in the new OS X bundle detection
code that is part of QFileSystemEngine.
Change-Id: Id0817e9692da411c7eb8287b9bf71b99ae28f960
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
This partially reverts commit 1755038134,
which did not only fix undefined (signed left-shift), but also
implementation-defined (signed right-shift) behavior. It turned out
that code depends on a particular implementation behavior (logical
instead of arithmetic right-shift), and needs to be fixed first.
Change-Id: I9ba32d06f127d17d05e0c6f6eac3d26268587bca
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
(this is committing the new output of generate_ui from qttools)
For QLatin1String, operator== is overloaded, even for QStringRef,
so comparing to a latin-1 (C) string literal is efficient,
since strlen() is comparatively fast.
OTOH, QStringLiteral, when not using RVO, litters the code with
QString dtor calls, which are not inline. Worse, absent lambdas,
it even allocates memory.
So, just compare using QLatin1String instead.
Change-Id: I5035d259085c21689ab0f62fd49819ab5223ffe8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add missing includes and reorder includes to avoid X defines breakage
Change-Id: Iaf95ae2488df3d3301436262ed79f7091b4be0a9
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
While it is not recommended by Microsoft to manually exit an
application, currently applications just hang when exiting main().
Instead when QCoreApplication::exit() is called use the CoreApplication
to properly invoke native Exit() and let the application completely shut
down.
Add a warning to notify developer about this non-standard behavior, as
usually the system is supposed to take care of suspending and closing.
Certification still passes for Windows RT and Windows Phone.
Task-number: QTBUG-43862
Change-Id: Ia34443ea75daaaeca0bee2a0c9fcc568c0659262
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
We were leaking memory in case setPattern was called multiple
times
Task-number: QTBUG-43893
Change-Id: Icd9c214edea064aeaeb6f92a9c62836238ccd344
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It appears some VNC servers reports incorrect masks in their visuals.
This patch recognizes this unlikely set of masks and interprets it as
RGB16 which VNC expects.
Task-number: QTBUG-44147
Change-Id: Ia374edcd5f0a5ce0188157ac1d328f888cfa260c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
You need to specify explicitly the styleHint enum instead of the
theming one, which is where we want to forward to.
This caused all clicks to be ignored in case there is a listener to
pressAndHold as the hold period is reduced to 0 milliseconds.
Task-number: QTBUG-44196
Change-Id: I30d1771b91b5fa358e896e8441ade965543d4613
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Andrew Knight <qt@panimo.net>
On a GNOME or UNITY desktop, Qt will currently read font-settings from
Xft and use those ignoring any fontconfig instructions. This patch
changes the behavior so the Xft settings are only used as default, but
any explicit overrides by fontconfig will take precedence.
Task-number: QTBUG-43660
Change-Id: Ie10d5828cbfdd95fe5364c63a625d455d9213936
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Use x86 for a 32 bit build of qmake and x86_64 for 64 bit.
This is needed for shells that do not set VCINSTALLDIR.
Change-Id: I0843c1a590161669530b99f45ab59d523e6596c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
01fc82e357 updated the code for ICC 15,
but it needs to be 15.0.1
Change-Id: Iba8d819ab9174d9dac07ffff13bbc26b9be46d53
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It looks like that WindowFromPoint does not
return same handle each time, hence
he then is in a endless loop. We don't need
to look for a child in a loop here for
Windows Embedded Compact.
Task-number: QTBUG-44073
Change-Id: Ic42d56616b29f293d187111588fde3947c15659c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This reverts commit dfe853bff9.
When using cyrillic or other keyboard layouts, standard shortcuts
like CTRL-C are still supposed to work as if the US keyboard layout
were in effect.
Task-number: QTBUG-44021
Task-number: QTBUG-35734
Change-Id: If6cd96a1e03e62900b293f8e304e523460e85810
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Mainly because of a change in certificates which is causing failing
tests. This patch is cherry-picked from
https://codereview.qt-project.org/104619/
Change-Id: I8304e5ac4107428a250b71be5df7b5399a811017
Reviewed-by: Richard J. Moore <rich@kde.org>
Immediately try to initialize a context obtained by
eglGetPlatformDisplayEXT() and clear display in case it fails,
falling back to eglGetDisplay().
Change-Id: Ia6c1c6da4daff6651153c854eda4fb8749bdc526
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Due to a flaw in the internal API, QXmlStreamReader's internal buffering
would mistake a NUL byte in the input stream for EOF during parsing, but
wouldn't set atEnd == true because it hadn't yet processed all bytes.
This resulted in an infinite loop in QXmlStreamReaderPrivate::parse.
So, instead of returning zero (false) to indicate EOF, return -1 (but in
unsigned form, ~0, to avoid ICC warnings of change of sign). In turn,
this required enlarging a few variables to avoid ~0U becoming 0xffff,
which is a valid QChar (could happen if the input is a QString, not a
QIODevice).
Task-number: QTBUG-43513
Change-Id: If5badcfd3e4176b79517da1fd108e0abb93a3fd1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Properly check QFont::WordSpacingResolved when use setFont()
with QTextCharFormat::FontPropertiesSpecifiedOnly
Change-Id: I72f1641ef7587cbaf8fcf5fef2f3c44393b0ebfc
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This was available before but was protected with the wrong define for OS
X, so this is changed to the right define.
Task-number: QTBUG-23696
QTBUG-23703
Change-Id: I669a6cf2ff7c01020693adff9f04a4b8b9404d02
Reviewed-by: David Faure <david.faure@kdab.com>
QDebug does not have noquote() in Qt 5.3.
Task-number: QTBUG-44021
Change-Id: If35b926d6b1e5bb9ad3534357630533dfcecd076
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
When checking for completion on the file system, we need to check
for directories that actually exists.
Change-Id: Id83e3802abcd40355dcd8cd47f2d55061eacd117
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
This reverts commit 8456adf0ee.
The change introduces a massive slowdown of the application
startup caused by the inner enumeration.
Task-number: QTBUG-43774
Task-number: QTBUG-40828
Change-Id: I694938eab93ea409d97537b55e8a025bb7a0e393
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This fixes a bug when submenus are shown as simple actions when
a platform system tray icon is used.
To correctly handle submenus, we need to set platform menus on
all submenus, and only then on a parent menu.
Change-Id: If2bfcc703b938dbb14ba4b9aa810039ced07e946
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Dimitrios Glentadakis <dglent@free.fr>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Implemented handling of GID_DirectManipulation for WinCE.
Derive touch information out of gesture event
directmanipulation.
Task-number: QTBUG-31216
Change-Id: I74e90f32d2384fc3550b47af0b72edf0292dea8f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The note is already in setItemWidget where it makes sense.
This looks like a copy/paste error; this method doesn't change
anything in terms of ownership, it's a getter.
Change-Id: Idc963787b81f53fb37bbe59e9bf35f47d3441b34
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
Gets rid of warning that the file is missing, but probably doesn't
have any other effect since the file in question does not require
moc-ing.
Change-Id: I22085a55c212b6285341d61462dfaf548787e11c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
When we supported platforms < android-9, we needed to include
some headers which were introduced in android-9 to compile the
QPA plugin. This is no longer needed, and also creates problems
when you pick e.g. android-21 as your platform, since some
definitions (specifically fd_set) are different in the two sets
of headers, giving us an undefined reference to
QEventDispatcherUNIX::select().
Change-Id: Ifd28479b4bf3be0e9e62200a01fc4cf2cc855215
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Setting the stretch of a QFont did not work correctly on OS X or
iOS.
Two things are needed to make it work: First of all, we need to
properly set the transform when creating the CTFont.
In addition, we need to manually scale the advances, as
CTRunGetPositions() does not do this for us. On OS X 10.6, however,
there was a regression and CTRunGetPositions() would return scaled
positions, so we exclude the step to scale the advances on this
particular version.
This is an adaptation of bc25cfdd65452efa226cbd544c9ae9803eb6748a
in Qt 4.
[ChangeLog][QtGui][OS X/iOS] Fixed a bug when rendering fonts that
were set to be stretched.
Task-number: QTBUG-43801
Change-Id: I4902a9f5e29299761e3c2c5c6d6d80ee1dea1a25
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Only happens with active signal spy callbacks. The Connection object can
be deleted when returning from the slot here, so accessing it for the
method index for the signal end callback will access invalid memory.
Change-Id: I44643a171863c35a94e7a5ffa096fcaac5abd509
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When creating a temporary directory but failing to set its permissions,
we need to remove the directory we created to avoid leaving 256 empty,
unused directories in the destination folder.
This happens on Android if you try creating a QTemporaryDir in the
download path on the sdcard.
Task-number: QTBUG-43352
Change-Id: Ic88fb7572f1abd65e5c7d8882b59c95f4b22ed72
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ChildWindowFromPoint does not work properly under
wince, so lets use the plain old WindowFromPoint.
Task-number: QTBUG-44022
Change-Id: I49bae6409f2d11ddc01bea01f4c2f91a02b90892
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
bec1854cc0 introduced a regression:
when sorting a tree model, children items would not follow the sorted
parents any more (they wouldn't be remapped correctly), resulting
in crashes.
So, the fix needs more reasoning; let's revert the fix,
but leave the original test around for any subsequent attempt, and
introduce a new test which looks for the right behavior when
sorting trees.
This commit partially reverts bec1854cc0.
Task-number: QTBUG-43827
Change-Id: Ic83ac53aef639f870f6c36a8b4b2992f5b485b13
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
(cherry-picked from qtbase/e9ad46ed412987e3e46c5a641e5f30408b97ac90)
The documentation says that QUdpSocket emits readyRead() only for one
datagram and that if you don't read it, the class will not emit again.
That should be implemented by disabling of the socket notifier once we
have the datagram already read, but was broken.
In turn, that breakage caused a live-lock of the event loop: since we
didn't disable the notifier nor read the pending datagram, the event
loop would fire every time for the same datagram.
The re-enabling of the notifier was already working.
Task-number: QTBUG-43857
Change-Id: Ic5d393bfd36e48a193fcffff13bb32ad390b5fe8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The selection update is not implemented on other platforms (if needed at
all).
Task-number: QTBUG-39440
Change-Id: I8eb8c4eb1c23ba2d246bc95f1c77dc9da9e22495
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
