Just sending the event to the embedded widget is not enough, we
have to perform hit-testing for the different touch points, and
send the event to the child widget under the point. Fortunately,
QApplicationPrivate::translateRawTouchEvent provides the logic
that generates multiple events for groups of touch points.
Since that helper always sent events spontaneously, add an
optional parameter to allow sending of non-spontaneous events.
Add a test case that simulates touch events to different widget
configurations inside a QGraphicsProxyWidget.
Fixes: QTBUG-67819
Task-number: QTBUG-45737
Pick-to: 6.2 6.1 5.15
Change-Id: Iffd5c84c64ee2ceadc7e31863675fdf227582c81
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When a needle has length 1 (because it's a QChar/char16_t, or because
it's a string-like of length 1) then an ad-hoc search algorithm is
used. This algorithm had a off-by-one, by not allowing to match at
the last position of a haystack (in case `from` was `haystack.size()`).
That is inconsistent with the general search of substring needles
(and what QByteArray does). Fix that case and amend wrong tests.
This in turn unveiled the fact that the algorithm was unable to cope
with 0-length haystacks (whops), so fix that as well. Drive-by, add a
similar fix for QByteArray.
Amends 6cee204d56.
Pick-to: 6.2
Change-Id: I6b3effc4ecd74bcbcd33dd2e550da2df7bf05ae3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use U+FB01 LATIN SMALL LIGATURE FI instead of U+00DF LATIN SMALL
LETTER SHARP S in testcases that need non-ASCII URLs that are
normalized to ASCII. The latter is not normalized to ASCII when
using UTS #46 nontransitional processing.
Task-number: QTBUG-85371
Change-Id: I8c153feb58e556b1d31439018cc84d8e8f1de1a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
U+04CF CYRILLIC SMALL LETTER PALOCHKA was undefined in Unicode 3.5 used
by IDNA2003 but it is allowed in UTS #46.
Task-number: QTBUG-85371
Change-Id: I7f5c0f6dc57f1197fd509e98328207d6179f1624
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
IDNA 2008/UTS #46 do not use nameprep anymore and have different
validity rules.
Unexport qt_nameprep() and qt_check_std3rules() because they
are not used by any tests anymore.
Task-number: QTBUG-85323
Change-Id: I38c0dbae9a6bd108fbcfac350767aa7e757e786f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use U+1F100 DIGIT ZERO FULL STOP instead of U+1F4D9 ORANGE BOOK.
The latter is not allowed according to IDNA 2003 rules but is allowed
according to UTS #46 rules. The former is disallowed in either case.
Task-number: QTBUG-85371
Change-Id: Idc8afef68c26ae0b702a475e5a53592182998a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Relying on the fact that a given capturing group captured a null string
doesn't allow users to distinguish whether a capturing group did not
capture anything, or captured a null substring (say, from a null subject
string).
Perl allows for the distinction: the entries in the @- and @+ arrays are
set to values in case there is a capture, but they're undef otherwise.
PCRE2 gives us the information already in the results "ovector", but
it was simply not exposed to QREM users. So, expose it.
[ChangeLog][QtCore][QRegularExpressionMatch] Added the hasCaptured()
family of functions to know if a given capturing group has captured
something.
Change-Id: Ic1320933d4554e2e313c0a680be1b1b9dd95af0b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was not ported to CMake yet.
Pick-to: 6.2
Fixes: QTBUG-88601
Change-Id: Ied3b1a0e2ddfbcf003cb0d8d01d5f64cb83cf4e7
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
They were replaced by CMake files and oss-fuzz was updated to use the
latter. No need to still maintain qmake based builds.
Change-Id: If38f39c23ef3a58c33c428341486b62fd0a81888
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The nested widget might be a QGraphicsView as well (documented to be
supported), and QGraphicsScene maintains it's own activation status by
counting Window(De)Activate events. We need to make sure that the
embedded widget is informed about its activation status so that deeper
nested children can receive focus.
Forward WindowActivate/Deactivate events to the nested widget, which
will pass it on to all its children. Add test case, which without this
fix fails when verifying the inner scene's isActive state, or later
when testing that focusInEvent is delivered to the embedded widget.
Fixes: QTBUG-94091
Pick-to: 5.15 6.1 6.2
Change-Id: I4e0ecef50685ed081d15c7f76b6c1a4a40ed2682
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
An oversight in the code kept the algorithm in the GB11 state, even if
the codepoint that is being processed wouldn't allow for that (for
instance a sequence of ExtPic, Ext and Any).
Refactor the code of GB11/GB12/GB13 to deal with code points that break
the sequences (falling back to "normal" handling).
Add some manual tests; interestingly enough, the failing cases are not
covered by Unicode's tests, as we now pass the entire test suite.
Amends a794c5e287.
Fixes: QTBUG-94951
Pick-to: 6.1 5.15
Change-Id: If987d5ccf7c6b13de36d049b1b3d88a3c4b6dd00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, actually use the constants as the size of some arrays,
instead of making [1024] arrays and then only using a few entries.
Change-Id: I9f36b322840393b8680788190cf8b40a828f4957
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It tried to find its test-data-directory locally, instead of asking
FileSystem where it was keeping its files, relative to a temporary
directory. Its expected counts didn't match the arcane results of its
data file; since this is a benchmark, not a regression test, I'm
assuming that's just because it was never right or the rules for
QDirIterator's filtering have changed.
Tidied up somewhat in the process.
Change-Id: Ib2dcd314b11cb0f1a6fc425633afd0e9c39bd036
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As QPropertyAlias was public by accident in 6.0, we have to ensure that
it still works in 6.2.
This re-adds some tests for it, and reimplements the unlinking
functionality. To avoid performance regressions in hot-paths,
a new unlink_fast function is added, which behaves like the old unlink:
It ignores the special handling for QPropertyAlias, so that we can skip
the tag check. It is only used in QPropertyObserverNodeProtector and
clearDependencyObservers, where we already know the type of the
observer.
Fixes: QTBUG-95846
Pick-to: 6.2
Change-Id: Ifb405b8327c4d61c673b1a912ed6e169d27c2d8f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When assigning multiple variables to a specific section, both GCC
and Clang legitimately error out if those variables wouldn't end
up in the same section (e.g. if one of them is going to a read-only
section while the other one is going to a read-write section).
In C++, when a seemingly const variable needs dynamic initialization,
it needs to be stored in a read-write section.
Clang 13 changed internals for how some constants are materialized.
Now, when a variable is initialized with an expression containing
plain old fashioned casts, it is considered to be potentially
runtime initialized (at the point when section assignment conflicts
is evaluated). Therefore, Clang 13 errors out on fakeplugin.cpp
with errors like:
fakeplugin.cpp:36:39: error: 'message' causes a section type conflict with 'pluginSection'
QT_PLUGIN_METADATA_SECTION const char message[] = "QTMETADATA";
^
fakeplugin.cpp:32:40: note: declared here
QT_PLUGIN_METADATA_SECTION void *const pluginSection = (void*)(0xc0ffeec0ffeeL);
^
See https://bugs.llvm.org/show_bug.cgi?id=51442 for discussion
on the matter in Clang.
To simplify things, just initialize the fake pointers as regular
uintptr_t instead, avoiding the whole matter. This produces the
exact same contents in the section as before.
For what it's worth, the actual manually constructed metadata in
fakeplugin.cpp doesn't seem to have any effect on running the
QPluginLoader tests on either ELF or MachO right now.
Change-Id: Ib84a2ceb20cb8e3a1bb5132a5715538e08049616
Pick-to: 6.2 6.1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When forcing software scrolling through QScroller::scrollTo,
it will start from (0, 0). QGraphicsViewPrivate::canStartScrollingAt
should consider the locationof points, not just the flags of item.
Fixes: QTBUG-70255
Pick-to: 5.15 6.1 6.2
Change-Id: Iebdd5568baa3bdb41c705204dadb2895cfe9c0e2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add painting of sets of lines, both connected and unconnected, that go
outside the device area.
This prepares for fixes & improvements in the painting code.
Pick-to: 6.2 6.1 5.15
Change-Id: I9cffc760524e9ade42362c9a04949270ac24180f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The tests can now be built with qt-cmake-standalone-test.
Change-Id: I098340a9f755806061de281fbc25cb00c61f33f0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't go via QString when we don't need to.
Put expected after actual, not the other way round.
Give tests and test-cases sensible names.
Prefer function-style cast over C-style.
Change-Id: I0b79534a9cc95f2e312a85394693ac674ff3d1d6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using NoFontMerging, no fallbacks should be resolved. If the
font does not support a specific character in the text, we should
display a box instead of merging it with another font.
But in practice, Qt would still apply the fallback mechanism for
one specific case: If the font itself does not support the script
of the text, we would get no match and do a search for a fallback
instead. Since NoFontMerging is set, we would then force this
as preresolved for *all* scripts in the QFont's private data
(logically, the match should only have a single response for
NoFontMerging).
The end result was that if you set the font family before updating
the text, you would get broken rendering. This can happen e.g. in
Qt Quick, where you could update the font family of a text label
while it contains characters which are not supported by the new
font. Qt would then pick a fallback instead. When you subsequently
update the text, the fallback would already be preresolved for
whatever script this is. If it does not support the updated text,
we would then see boxes, even if the requested font actually would
have supported it.
The fix is simply to do an additional pass if NoFontMerging is set
and we were not able to match with the specified script. Since
the same family might be available in different foundries, with
different writing system support, we still want to do a pass first
to see if we can match the exact script of the text.
Note that QRawFont::fromFont() exploited the bug by using
NoFontMerging for getting the fallback font for a specific
writing system. To keep this working without having to rewrite
fromFont() and risk introducing regressions, we add an argument
to make the findFont() function behave as before. It isn't
super-pretty, but since it is private API it is hopefully fine.
[ChangeLog][QtGui][Text] Fixed an issue with NoFontMerging and
changing font families dynamically, where boxes would be seen in
place of the correct text.
Pick-to: 5.15 6.1 6.2
Done-with: Andy Shaw
Fixes: QTBUG-81770
Change-Id: Ide9a36d7528a1040172c5864fa99e7a82eac4e83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There's no need of duplicating code all over the place; QString can
reuse the implementation of the indexOf/contains/count/lastIndexOf
family of functions already existing for QStringView.
For simplicity, the warning messages (that our autotests actually check)
have been made more generic, rather than introducing some other
parameter (as in, "which class is using this functionality so to emit
a more precise warning"), which would have just complicated things as
the implementation of these functions is exported and used by inline
QStringView member functions.
Change-Id: I85cd94a31c82b00d61341b3058b954749a2d6c6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An empty QString(View) is allowed to have nullptr as its data pointer
(of course, only if its size is 0). This wasn't properly
checked in QRegularExpression, which passed such nullptr to
PCRE, and that resulted in PCRE raising an error (PCRE_ERROR_NULL).
Detect this case and pass a dummy pointer to keep PCRE happy.
Fixing and testing this in turn exposed a problem with QStringView
support in QRegularExpression when used over a null QString: the
code is supposed to use the QStringView(QString) constructor and NOT
qToStringViewIgnoringNull. That's because QRE distinguishes null
and empty subjects; when using qToStringViewIgnoringNull over
a null QString, one gets a non-null QStringView (!). Again, this in
turn exposed a problem with a QRegularExpression autotest that assumed
that a null match could only mean "no match" (instead, it can happen at
position 0 of a null QString(View)).
Change-Id: Ifb3cf14dec42ce76fcdbcb07ea1d80784d52ef65
Pick-to: 6.1 6.2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When trying to fix 0-length matches at the end of a QString,
be83ff65c4 actually introduced a
regression due to how lastIndexOf interprets its `from` parameter.
The "established" (=legacy) interpretation of a negative `from` is that
it is supposed to indicate that we want the last match at offset `from +
size()`. With the default from of -1, that means we want a match
starting at most at position `size() - 1` inclusive, i.e. *at* the last
position in the string. The aforementioned commit changed that, by
allowing a match at position `size()` instead, and this behavioral
change broke code.
The problem the commit tried to fix was that empty matches *are* allowed
to happen at position size(): the last match of regexp // inside the
string "test" is indeed at position 4 (the regexp matches 5 times).
Changing the meaning of negative from to include that last position (in
general: to include position `from+size()+1` as the last valid matching
position, in case of a negative `from`) has unfortunately broken client
code. Therefore, we need to revert it. This patch does that, adapting
the tests as necessary (drive-by: a broken #undef is removed).
Reverting the patch however is not sufficient. What we are facing here
is an historical API mistake that forces the default `from` (-1) to
*skip* the truly last possible match; the mistake is that thre is simply
no way to pass a negative `from` and obtain that match. This means that
the revert will now cause code like this:
str.lastIndexOf(QRE("")); // `from` defaulted to -1
NOT to return str.size(), which is counter-intuitive and wrong. Other
APIs expose this inconsistency: for instance, using
QRegularExpressionIterator would actually yield a last match at position
str.size(). Similarly, using QString::count would return `str.size()+1`.
Note that, in general, it's still possible for clients to call
str.lastIndexOf(~~~, str.size())
to get the "truly last" match.
This patch also tries to fix this case ("have our cake and eat it").
First and foremost, a couple of bugs in QByteArray and QString code are
fixed (when dealing with 0-length needles).
Second, a lastIndexOf overload is added. One overload is the "legacy"
one, that will honor the pre-existing semantics of negative `from`. The
new overload does NOT take a `from` parameter at all, and will actually
match from the truly end (by simply calling `lastIndexOf(~~~, size())`
internally).
These overloads are offered for all the existing lastIndexOf()
overloads, not only the ones taking QRE.
This means that code simply using `lastIndexOf` without any `from`
parameter get the "correct" behavior for 0-length matches, and code that
specifies one gets the legacy behavior. Matches of length > 0 are not
affected anyways, as they can't match at position size().
[ChangeLog][Important Behavior Changes] A regression in the behavior of
the lastIndexOf() function on text-related containers and views
(QString, QStringView, QByteArray, QByteArrayView, QLatin1String) has
been fixed, and the behavior made consistent and more in line with
user expectations. When lastIndexOf() is invoked with a negative `from`
position, the last match has now to start at the last character in the
container/view (before, it was at the position *past* the last
character). This makes a difference when using lastIndexOf() with a
needle that has 0 length (for instance an empty string, a regular
expression that can match 0 characters, and so on); any other case is
unaffected. To retrieve the "truly last" match, one can pass a
positive `from` offset to lastIndexOf() (basically, pass `size()` as the
`from` parameter). To make calls such as `text.lastIndexOf(~~~);`, that
do not pass any `from` parameter, behave properly, a new lastIndexOf()
overload has been added to all the text containers/views. This overload
does not take a `from` parameter at all, and will search starting from
one character past the end of the text, therefore returning a correct
result when used with needles that may yield 0-length matches. Client
code may need to be recompiled in order to use this new overload.
Conversely, client code that needs to skip the "truly last" match now
needs to pass -1 as the `from` parameter instead of relying on the
default.
Change-Id: I5e92bdcf1a57c2c3cca97b6adccf0883d00a92e5
Fixes: QTBUG-94215
Pick-to: 6.2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All the tests were using the C locale, so were equivalent to tests of
QTime::toString(). Add a locale column and some test-cases in
preparation for a change to am/pm indicators.
Task-number: QTBUG-95790
Change-Id: I3ad917b7a6f3d3bfe31d6a5a5da596025f173e81
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ImAbsolutePosition was added in f8dbed1226,
based on requirements on Android, but without an implementation for
QLineEdit. It would seem sensible to fall back to the cursor position
in this case, as QLineEdit doesn't support multiple blocks.
Pick-to: 6.2
Change-Id: Iff1255270ceef069f03ce457df633d7b675f1a28
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QtConcurrent::RunFunctionTask class keeps a variable to store the
result of QtConcurrent::run when it becomes available, so that it can be
reported afterwards. This requires the result type to be
default-constructible. However there's no need in storing the result, it
can be reported immediately after it becomes available.
Pick-to: 6.1 6.2
Fixes: QTBUG-95214
Change-Id: I95f3dbff0ab41eaa81b104a8834b37d10a0d193a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Doing the deletion at the end of the block only works if the test
passes. Drive-by: remove spurious braces from single-line bodies of
single-line controls. The QTest macros are done properly.
Pick-to: 6.2 6.1 5.15
Change-Id: I83002547dba49ab9792f4db44d73151b1c036900
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
When the test failed, it never released the blocking slot, so the
tested thread remained blocked indefinitely. Blacklisting doesn't
rescue that: the test run gets killed by Coin's watchdog.
Use a QScopeGuard() to release the clocked slot on failure.
replacing the release that was happening only on success.
As drive-by clean-up, smarten up the code a little and remove an
unused enum.
Pick-to: 6.2 6.1 5.15
Change-Id: Ie035dafe6e4b1d82aea5de38ceb31c0f7fcf81d7
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Test both Abort and Continue cases. Test more with successive marked
as expected failure. Test cases with a QSKIP after the marked check.
Unify data functions where practical.
Change-Id: I2eade5e4dd0907d23e37137ce3d93cd5ca79f802
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Exhausts the entire buffer which double-conversion is left to work with.
Also has a large amount of precision, which apparently we need to store
temporarily.
Task-number: QTBUG-88484
Change-Id: I87e8c323676465f1b8695e086020df1240d0d0d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add more overflow checks from the sample code in RFC 3492.
Also check if a code point to be inserted into output is in
the allowable range for Unicode.
Rewrite all overflow checks to use {add,mul}_overflow()
functions.
Do not try to process any inputs that are too long to be
part of a valid domain name label.
This fixes a test in tst_qurlinternal.
Fixes: QTBUG-95689
Pick-to: 6.2
Change-Id: Ice0b3cd640d8a688b63a791192ef2fa2f13444be
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Take the rvalue insert() function and turn it into the emplace()
function. Reformulate rvalue-insert using emplace(). Lvalue insert()
is using a different code path, so leave that alone. This way, we
don't need to go overboard with testing.
[ChangeLog][QtCore][QVarLengthArray] Added emplace(), emplace_back().
Change-Id: I3e1400820ae0dd1fe87fd4b4c518f7f40be39f8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In order to fix QTBUG-95552 properly we have to add APIs to
QGraphicsSceneWheelEvent that informs QGraphicsProxyWidget about
whether the event is a high-precision event where Qt grabs the
wheel.
If it is, then the wheel grabber will be the QGraphicsView's viewport,
and any wheel event sent to any widget will be grabbed by it. This
results in infinite recoursion, partly fixed in change
I78400ceae8da7a4e22a988c06ed58f99f1a979f4.
The proper fix is to re-grab the wheel by the embedded widget
if it (or any of its children) accepts the ScrollBegin event (and if
not, return the grab to the QGraphicsView).
This fixes the scenarios that failed in the test case, so now scrolling
through nested widgets and scrolling in nested widgets works as the
user would expect.
Fixes: QTBUG-95552
Pick-to: 6.2
Change-Id: I3e1f31cbff999c70f8c63c034f77cd2ae567d7e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For high-precision wheel scrolling sequences, the widget that gets
the first (typically ScrollBegin) event grabs the wheel. Qt directs
all future wheel events within the same sequence (i.e. until ScrollEnd)
to that widget.
QGraphicsView passes wheel events through to the item under the mouse,
and QGraphicsProxyWidget implements wheelEvent to forward a synthesized
QWheelEvent to the embedded widget. Since QGraphicsView's viewport has
already grabbed the wheel, any forwarded event would end up back in
QGraphicsView, resulting in infinite recursion (if the assert doesn't
fail first in debug builds).
The correct fix requires that QGraphicsProxyWidget knows that this is
a high-precision wheel event, allowing it to adjust the wheel grabber
temporarily to the embedded widget. However, QGraphicsSceneWheelEvent
doesn't provide this information.
To fix the infinite recursion, mark the generated event as synthesized
by Qt (but still send it spontaneously to enable propagarion within
the proxy widget hierarchy). In QApplication's notification routine,
interpret such events then to override the wheel grabber.
Add a test case for the various scenarios. This 6.1 compatible fix
does not pass all situations. A follow up commit that introduces the
missing APIs to QGraphicsSceneWheelEvent then fixes those as well.
Task-number: QTBUG-95552
Pick-to: 6.1 6.2
Change-Id: I78400ceae8da7a4e22a988c06ed58f99f1a979f4
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Changing the screen orientation will cause the menu position to be
displayed incorrectly. When the screen is rotated, the geometry of
the application changes. We can refer to the handling of the menu
on Android or IOS. Close the popup window when the screen
orientation changes.
Fixes: QTBUG-95607
Pick-to: 6.2
Change-Id: I55e1cd6a8b89e375c6714a9163dfb1902d52f101
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Unlike simplified(), it just moves the end-points, without needing to
modify contents, so it makes sense (as for QStringView and
QLatin1String) to provide it. Moved QByteArray's trimmed() tests to
tst_QByteArrayApiSymmetry so that QBAV can now share them.
[ChangeLog][QtCore][QByteArrayView] Added trimmed().
Change-Id: Ifd7a752adb5f3d3e2ad0aa8220efa7e7d2d39baa
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QFont should be constructed with a list of font families.
Pick-to: 6.2
Change-Id: I61141b25d3f6e25f4fea141acbfa8e164d7af58f
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Return ASCII sequences that start with xn-- but fail Punycode
decoding as is when converting URLs to Unicode. This is consistent
with handling of sequences that do decode successfully but fail other
validity checks.
This fixes one test in tst_qurlinternal.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I63d7197f25102c96f5dc21d9fecec5e015c531cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test string "xn--l0902716a" encodes 2**32. Currently
the IDNA code returns an empty string when encoding this
to Unicode instead of expected original string.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I5ce7bcc744c9d5426f66b8a7d0ae76c7c92f552b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use a lambda to simplify testcases for bad IDNs.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: Ia4f3a5dbc73c74968628d89bd64d7aa6692b1c46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When formatting numbers, if the fill character used to left-pad to
field widths is '0', the code delegates that padding to the
QLocaleData's ZeroPadded formatting option. Since we want the zeros
before any minus sign, and don't want to subsequently add more zeros
before it, check that this has worked as expected when calling
replaceArgEscapes(), to confirm that it doesn't need to worry about
that.
Add some tests that verify the expected behavior.
In the process, tidy up the code doing this. Rename a local variable
to match our coding style, split a long line.
Pick-to: 6.2
Change-Id: I7cc430c5bceb006cf4e226bca33da16bd2bb1937
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The Qt style sheet reference claimed that Length properties can be
specified in 'em' or 'ex' units, but that was never implemented.
Add the missing implementation. Since the sizes depend on the size of
the font of the current element, we cannot convert the units in the CSS
parser, but have to do so in the QRenderRule constructor, where we can
make a decision about which font to use if the style sheet itself doesn't
specify a font. Fall back to the widget font if possible; otherwise it
will be the application default font.
The implementation translates em into QFontMetrics.height, identical to
what is already done in the QCssParser. This is in line with the CSS
specification, but contradicts our previous documentation which stated
that 'em' means "width of M". Fix the documentation.
Fixes: QTBUG-8096
Pick-to: 6.2
Change-Id: I145e2504ae3b19101a0d0dd63653466b6c2cec1d
Done-with: Cristian Maureira-Fredes <Cristian.Maureira-Fredes@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The separation between <system-out> and <system-err> is sufficient, and
we can't expect consumers to interpret our custom comment format.
The type of the text node has been renamed to more accurately identify
its purpose.
Pick-to: 6.2
Change-Id: I63c8ff17529fc087e1b695698350a6711eb5e68d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's used to handle qCritical() messages, and corresponds to QtMsgType's
QtCriticalMsg, so change its name to reflect what it really is.
In the process, reclassify the -maxwarnings overflow message as a warning,
rather than a critical message.
Pick-to: 6.2
Change-Id: I87626117a547ae4498d5dc352b93bd6db8bfb332
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original Ant JUnit reporter only writes <system-err> and <system-out>
to the <testsuite>, but more modern reporters such as Maven Surefire
scopes output to each individual <testcase>.
This is also handled by both the Jenkins JUnit and xUnit plugins, e.g.:
https://github.com/jenkinsci/junit-plugin/commit/145eb5c98
Pick-to: 6.2
Change-Id: I20c87276004a4e0910fc18e05e6ffa0f5e5a7b7c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
