QHash::squeeze() was unconditionally calling reserve(0), which is
always allocating memory (even for 0 size).
This was leading to a confusing situation when calling squeeze() on
a default-constructed container with 0 capacity() actually allocated
memory. This is very misleading, as squeeze() is supposed to free
unneeded memory, not to allocate more.
This patch adds a check for non-zero capacity. As a result, nothing
is done for default-constructed container.
Note that this patch also affects the QSet::squeeze() behavior, because
QSet uses QHash as its underlying data type.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ib1c3c8b7b3de6ddeefea0e70b1ec71803e8fd3b3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
When inserting items into the result store, a ResultItem is created,
which stores a pointer to the results list and their size. If the size
of the ResultItem is set to 0, it means that a single result is stored.
In case of trying to report results via an empty list, the size is 0, so
result store treats it as a single result.
Added checks before storing the results to make sure that the result
list isn't empty. Note that empty lists are allowed in some cases for
the filter mode, because ResultStoreBase::addResults() knows how to
handle those cases correctly.
Task-number: QTBUG-80957
Pick-to: 5.15 6.1 6.2
Change-Id: I399af4c3eef6adf82fea5df031fe9a9075006b1f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit c19695ab95.
Just because QSet has limited API doesn't mean we can't provide this
in an efficient way for std::unordered_set :P
Added tests.
Pick-to: 6.2
Change-Id: I4f8f0e60c810acdc666cf34f929845227ed87f3b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In two cases, it was as easy as replacing an unnamed enum's values
with constexpr variables. In the case of QSimplex, I opted for
qToUnderlying(), as the enum made sense on its own.
Change-Id: Ifcf5be14bd2f35e50adabdbd7ecdb2e83f6bf5b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed container.
Apart from that, many other tests are added to extend code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Icc1f1342738603c9bed065b2a36c72ea60b48962
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All the getters of QFutureWatcher are consistent with the getters of the
corresponding QFuture, except for the isFinished() method, which returns
'true' only after the finished() signal is delivered. This behavior
might be unintuitive for the users. In particular, isFinished() returns
'false', even if it's called immediately after waitForFinished().
[ChangeLog][QtCore][QFutureWatcher][Important Behavior Changes] The
QFutureWatcher::isFinished() method now indicates if the related
QFuture is finished, instead of indicating if the finished() signal was
delivered. This makes it consistent with the future that is being
watched.
Fixes: QTBUG-91048
Pick-to: 6.1 6.2
Change-Id: I6ae9b882b23e06198a82c95b026491bd480b3bf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ie57b5d13fad9a846c29c87be4985c87e69bba305
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed string.
Apart from that, some other tests are added to extend code coverage.
As a drive-by:
* fix int -> qsizetype in the test data
* fix int -> enum in the test data
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I159473b7f5dcbea1bdaf2966979e066296351208
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
While QFileSelector is documented to work on files, select accepts
arbitrary URLs. Moreover, the QML engine can end up intercepting
arbitrary (user provided) URLs, including to directories.
Prior to this change, passing "file:///" or "/" to the function would
break: We would temporarily get a "//" path, which is invalid, and thus
we would return an invalid in the end.
Prevent this by only appending a slash to the path when it doesn't have
one.
Fixes: QTBUG-85410
Pick-to: 6.2
Change-Id: I1d2807a9d225df611c3a5e871e3c1d90a6a25953
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
Extend tests to explicitly check the behavior of empty
default-constructed containers.
Also add some missing tests for the existing methods
(mostly for QMultiHash) and correct some end()s to cend()s
in comparisons.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ic9e1b86ef67f6bca2751a65a8589b2f7e0ebb5ea
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test causes frequent failures in the CI. Couldn't reproduce on
actual arm64 hardware, so it's likely to be a QEMU bug. From the
available logs it seems that all the test cases are flaky (there's a
failure even after cleanupTestCase() is called), so disable all of them.
Fixes: QTBUG-94737
Pick-to: 6.1 6.2
Change-Id: I783ec2179ba779a2c8d93351a78e8472a4f7a907
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch mostly introduces some test improvements to check the
calls of different methods on an empty default-constructed
container.
Apart from that some other tests are added to extend test
coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: If2bc96158462292bbdf8504942141af94568c729
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Add tests to verify parser behavior with locales that use code points
outside of Unicode BMP to represent dates. ccp is used for this because
Chakma language uses code points outside of BMP for both letters and
digits. QDateTimeParser currently is not able to handle this locale
correctly, so the tests are marked as expected failures.
Task-number: QTBUG-87111
Change-Id: I1cc6fe7304b47f19950ae0ad3179c4ffa946adb3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The use of a freestanding function is not needed now that the name
doesn't alias the nativeInterface accessor function, and was just
adding complexity to the machinery.
People not familiar with the code will have an easier time following
the flow through the helper member function, and we no longer need
to declare our own export macros.
Pick-to: 6.2
Change-Id: I17530b7e89939cfc19ab8ffaa076b7129ae02dcf
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ib3c3f5bcb967cd1031cb24ffceaa77a146212ffd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
In QItemSelectionModel, items which are disabled or marked as not
selectable should not be considered as selected. But this was
not handled consistently.
The following methods considered only items which are enabled and
marked selectable: selectedIndexes(), rowIntersectsSelection(), and
columnIntersectsSelection(). The following methods considered only
items which are marked selectable, but did not check whether they
are enabled: selectedRows(), selectedColumns(), isRowSelected(),
isColumnSelected(), isSelected(). Finally there is hasSelection(),
which did not check for enabled nor for selectable.
This patch introduces consistent behavior. All methods check
both whether the items are enabled and whether they are selectable now.
[ChangeLog][QtCore][QItemSelectionModel][Important Behavior Changes]
All methods in QItemSelectionModel now consider only items which
are marked as enabled and selectable as part of the selection.
Fixes: QTBUG-93829
Pick-to: 6.2
Change-Id: I4725243ea6b0db4f289ce34ada22c7a9d3282713
Reviewed-by: David Faure <david.faure@kdab.com>
The maximum size for a hash result is 64 atm. Even if, and esp when,
we'll get to 128 and 256 bytes in the future, there's no reason to use
dynamic memory, because the sizes will always be statically known.
So use, essentially, a std::array<char, 64> to hold the result
internally. Add a bit of convenience API on top to limit impact on the
rest of the code and add a few static_asserts that ensure this is large
enough. Then give users access to the internal buffer by adding
QByteArrayView resultView() const noexcept. The documentation snippet
is taken from QString::data(), suitably adjusted.
Use resultView() in a few places instead of result().
[ChangeLog][QtCore][QCryptographicHash] Changed to use a
statically-sized buffer internally. Added resultView() to access it.
Change-Id: I96c35e55acacbe94529446d720c18325273ffd2f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It timed out the other day on the CI. Even the SHA-1 check took 137s
(with a 300s timeout). Skip the SHA-512 test on the CI, but keep it
for manual runs.
Pick-to: 6.1 6.2
Change-Id: I49792ac9bcab6512e1803f66cd986b2830e634c0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By switching out the static_assert for an enable_if we end up producing
a clearer error, at the call site:
/qt/qtbase/examples/gui/rasterwindow/main.cpp:69:9: error: no matching member
function for call to 'nativeInterface'
app.nativeInterface<QNativeInterface::QCocoaGLContext>();
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/qt/qtbase/src/gui/kernel/qguiapplication.h:176:5: note:
candidate template ignored: requirement
'NativeInterface<QNativeInterface::QCocoaGLContext>::isCompatibleWith<QGuiApplication>'
was not satisfied [with NativeInterface = QNativeInterface::QCocoaGLContext, TypeInfo =
QNativeInterface::Private::NativeInterface<QNativeInterface::QCocoaGLContext>, BaseType =
QGuiApplication]
QT_DECLARE_NATIVE_INTERFACE_ACCESSOR(QGuiApplication)
^
By using SFINAE for the TypeInfo we can also ensure that it works for
types that are not native interfaces, such as if the user tries to
call nativeInterface<QString>().
Since we can no longer use decltype(*this) to resolve the base type
we need to change QT_DECLARE_NATIVE_INTERFACE_ACCESSOR to take the
type as an argument, as we do for other QT_DECLARE_FOO macros.
Pick-to: 6.2
Change-Id: Ie3f7e01ab7c3eb3dcc2ef730834f268bb9e81e0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QMetaType now implicitly knows how to convert any QFuture<T> to
QFuture<void> without needing to manually register a converter
function.
QtWebChannel will make use of this to transparently support QFuture<T>
return types.
[ChangeLog][QtCore][QMetaType] QMetaType now supports converting any
QFuture<T> to QFuture<void>.
Task-number: QTBUG-92903
Change-Id: Ied7e71be37c346cc3d2c274ffb0d91a6821ab4d4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I5b418265fc7cb3e56e44782be7704d642923a8e9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
In case of
QTranslator translator;
translator.load("somedir/file.qm");
and file.qm being a meta catalog file, the sub-catalogs in somedir
couldn't be located, unless "somedir" was set as second argument.
Pick-to: 5.15 6.1 6.2
Fixes: QTBUG-95013
Change-Id: I06103244ce2ff9800c2c64cb0c17f9bc7ef0e8de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This makes it easier to further extend the test. The overhead this
causes is negligible.
Pick-to: 5.15 6.1 6.2
Change-Id: I42941879f55337268bb2914e122a5f573ab7e6f9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This prevents us from first reserve()ing Prealloc elements, and then
possibly reserve()ing a larger number, which leaves the first bucket
list's memory unused.
Consequently, deprecate reserve().
Change-Id: Ifc0a5a021097f4589557e7b5e45d9d0892797ade
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Outside tests, all in-tree callers of QObject::findChildren() pass no
name to match, and in my experience that is also true for the vast
majority of out-of-tree users.
Avoid the temporary QString creation in the caller and the repeated
QString::isNull() checks in the implementation by overloading
findChildren() without a name argument and checking for name.isNull()
only once, forking off into separate helper functions.
Adjust in-tree callers that used an explicit `QString()` argument in
order to pass options, which goes to show that `name` should never
have been the first argument of findChilden() in the first place, even
though I appreciate the symmetry with findChild() (the use-cases of
which, however, are radically different).
Change a `findChildren().size() == 0` call found while scanning for
findChildren() calls to `!findChild()` as a drive-by.
Modernize loops in the various qt_qFindChild{,ren}_helper() overloads
to match how the new code looks.
[ChangeLog][QtCore][QObject] Added findChildren() overload taking no
name (thus optimizing this common case).
Change-Id: Ifc56e5438023d079b40c67f11ae274a3e128ad5e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QSettings encodes QVariants as @Type(data) strings. If that data contains
a null-byte, we write the string as UTF-8 encoded CFData. When reading it
back we look for a @ prefix, and then pass it as UTF-8 through stringToVariant.
The problem arises then the user writes raw QByteArrays with a @ prefix.
We can detect this situation by checking the result of stringToVariant,
and if it's just a simple conversion of the string into a QVariant, we
know that stringToVariant hit its fallback path due to not finding any
embedded variants.
If that's the case, we return the raw bytes as a QByteArray.
Pick-to: 6.2 6.1 5.15 5.12
Change-Id: I4ac5c35d0a6890ebea983b9aca0a3a36b0143de2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The ${QT_SOURCE_TREE}/src/network include paths of several tests are
apparently not needed anymore. Remove those.
tst_qfilesystementry and tst_qfreelist are the only tests that actually
need to reference files in qtbase's source tree. Simply use the paths
relative to the project file.
Task-number: QTBUG-88090
Change-Id: Ic6f341e001338c1b07dce6e58316245bc9560c5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
For generic interop with other parts of Qt, we need to be able to
extract the type-erased internal storage of QFuture<T>. In particular,
QtWebChannel needs this to transparently support QFuture<T> as a method
return type.
Task-number: QTBUG-92903
Change-Id: I763f054656b8810d58720262d364baf42c47eb37
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The decltype() of a const auto variable will be const T, for some
T. GCC warns that in the static_cast, said const is ignored.
Fix by not casting, but declaring a variable of fitting type. Add a
scope so the next reader doesn't have to go hunting for further uses
of 'readResult' or, now, 'expected'.
Change-Id: Iebc828a522810c6f2514fb3542d8c76c755ec7a5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The method was never tested, but it failed to compile after
QMultiHash was introduced as a separate class in 6.0.
This patch fixes it and adds some unit-tests to cover the case.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I5dd989d4775efc6a9bb13c5ed1d892e499d95dc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Do not detach when find(key, value) is called on an empty QMultiHash.
As a drive-by: fix return value for QMultiHash::remove() in case of
empty QMultiHash.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I1e32f359e7ee9ce8403dae79d02e0b88a20ec4a5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the ctor instead of appending 1'000'000 chars.
Introduce C++14 digit separators as a drive-by.
Change-Id: Icdbef3173f42d12ae2226b8556f9b1519e594adc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We call evaluateRecursive_inline in setBinding, which in turns runs the
noSelfDependecies check. However, creating a binding resuting in a
binding loop must not crash, but instead result in the binding entering
an error state. To prevent a crash caused by the assert in debug builds
of Qt, we replace the assert with a warning for now.
A better approach in the future would be to ensure that we only run the
check in cases where we are sure that a self-dependency is really a
fatal error.
Pick-to: 6.2
Change-Id: I58158864ed81fa907132a4e7d6667c9b529e7e64
Reviewed-by: Maximilian Goldstein <max.goldstein@qt.io>
Incl. the static hash() function. Remove the QByteArray versions from
the API, but not the ABI.
Adapt some callers.
[ChangeLog][QtCore][QCryptographicHash] Replaced QByteArray with
QByteArrayView in addData() and static hash() functions.
Change-Id: Ia0e9bf726276305e05894d323d76a29e985f39eb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Need to decrement 'remaining' (check), but also increment data (meep).
Testing is a bit complicated, as most algorithms are just too slow to
fit into the 5min QTestLib timeout. Picked the fast ones and Sha512
(which completes here in < 17s, with threads), at least.
Amends e12577b563.
[ChangeLog][QtCore][QCryptographicHash] Fixed a bug where presenting
more than 4GiB in a single addData() call would calculate the wrong
result().
Pick-to: 6.1 6.2
Change-Id: Ic72916ebc33ba087d58225af6d8240e46e41f434
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Due to mistake in data it was missed for testing.
Pick-to: 6.2
Change-Id: I4dcd6fd90fd501e4cc941c07efcf9439ba6acf30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
... and C++20 std::counting_semaphore API compatibility.
[ChangeLog][QtCore][QSemaphore] tryAcquire() now optionally takes a
<chrono> duration as timeout, not just int milliseconds.
[ChangeLog][QtCore][QSemaphore] Added try_acquire{,_for,_until}() for
C++20 std::counting_semaphore compatibility.
Change-Id: I34b6b4bf57a54745d4b97349903d090c4995338a
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
GCC can't see through all the foreach code to determine whether the
loop will execute at least once, so don't play hardballs with the
compiler and initialize the variable.
Change-Id: I95756a99eda497a25aa277046df9895f558758c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- QString/QStringView overloads were designed to be compatible for all
possible argument types, so check that it stays that way
- QString/QAnyStringView overloads have several known ambiguities that
we cannot and don't want to fix, because it would make
QAnyStringView less versatile, but at one should at least be able to
overload QString and weak-QAnyStringView.
Change-Id: I5e5ae3c96060c93bfe070f6c19213328dae9c5f9
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Match the checks in the constructor test that are similar.
Change-Id: Ifb62af09e31aac339f001f44bc30789330c85be6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If we disregard the precision we may read a very large string that we
subsequently discard. Furthermore, people use this to read
non-null-terminated strings, which randomly crashes.
Pick-to: 5.15 6.1 6.2
Change-Id: Ifa255dbe71c82d3d4fb46adfef7a9dc74bd40cee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the element you want to erase is the last element AND the
next element (element 0), when rehashed, would be relocated to the last
element, this leads to the state below. Which is similar to a test in
tst_qhash for some seeds.
auto it = hash.begin + (hash.size - 1)
it = hash.erase(it)
it != hash.end
By forcing the iterator to increment if we were erasing the last element
we always end up with a pointer which is equal to hash.end
Befriend the tst_qhash class so we can set the seed to a known-bad one
Pick-to: 6.2 6.1
Change-Id: Ie0b175003a2acb175ef5e3ab5a984e010f65d986
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Directly writing to the underlying property storage has the potential of
breaking all kinds of internal invariants. As we return QBindable in
the public interface, we should not grant callers access to the
internals of the object.
Pick-to: 6.2 6.1
Change-Id: I737ff293b9d921b7de861da5ae23356c17690b78
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
It was suppressed unconditionally (albeit in different places and with
different levels of obviousness) almost everywhere, due to inability
to set the system locale in use by the implementation. Several
test-cases used ISO-8859-1 encoding on Q_OS_MAC, where the tests were
all suppressed anyway. A block of no_NO tests was #if 0'd out; and
should, in any case, have been nb_NO. Tests of any locale but en_US
were skipped on Q_OS_WIN because we can't set the locale (but
including the tests of en_US tacitly assumed that's the system
locale). If setlocale() failed, for ICU or DARWIN, the test was
skipped; but we might as well check for this in the _data() to save
repetition.
The test was laboriously going through the sign cases; relocate the
QString::compare() test's sign() function so that we can use it here,
too, and simply QCOMPARE() signs. Introduce a TransientLocale class,
copied from tst_QLocale, to take care of setting and restoring the
locale using setlocale(). Change the locale name to a QByteArray so
that we save having to convert it to one in order to pass it to
setlocale(). Since that changed every _data() row, reformat those rows
in the process - most of them were long lines.
On the systems where we can't set the locale used by the function
being tested, condition each block of tests in the _data() on whether
LC_COLLATE looks like the locale to be tested, and report how a
determined developer at least can (by repeatedly running the test with
different locales set) test all the cases; and we'll attempt the ones
that we can, when one of the relevant locales is in use. If that
leaves us with no tests we can do, QSKIP() in the _data() to avoid an
assert failure for "Test data requested, but no testdata available."
Change-Id: I75709fda8827dcbe74f80c4136042054da6fcb13
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
System V semaphores are not supported in sandboxed applications,
so when Qt is configured with App Store compliance, or the user
requests POSIX IPC explicitly, we use that instead.
https://developer.apple.com/library/archive/documentation/Security/Conceptual/AppSandboxDesignGuide/AppSandboxInDepth/AppSandboxInDepth.html#//apple_ref/doc/uid/TP40011183-CH3-SW24
As the shared memory name limit on Apple platforms is very low,
we have to skip the existing logic for naming, and instead use
a truncated hash of the key. This should still be fine for
avoiding any collisions in practice.
An explicit check for the ENAMETOOLONG error has been added to
catch any cases where they key goes beyond the allowed length.
Sandboxed applications also have an extra requirement that the
key must include an application group identifier. This requirement
has been pushed up to the user and documented, as we don't have
enough information in Qt to know which identifier to use.
Both tst_QSystemSemaphore and tst_QSharedMemory work as before
with both sandboxed and non-sandboxed applications, after removing
some assumptions in tst_QSharedMemory about System V behavior.
Fixes: QTBUG-91130
Change-Id: Iaf1edb36a5d84d69e42ec31471a48d112faa8c6a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 16f927a4f1.
At the time the original change was written, QStringTokenizer
had not been integrated, yet.
Change-Id: I83c31d816199bc48c4baea855d13cbf9eda9aaa2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In commit 287ace562e, part of this test
was suppressed without filing a Jira ticket (or, at least, without
recording it in the QSKIP message). Since it's a known failure, it
should at least be a QEXPECT_FAIL, not a QSKIP. Since only some of the
subsequent parts of the test fail, I used QEXPECT_FAIL(,,Continue) on
each of the failing tests.
Task-number: QTBUG-94450
Change-Id: Iebc6801210c289b4502e59116e71d5901b71aa46
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Its collation (and everything locale-related) is only supported during
the lifetime of QApplication.
Change-Id: Ide97795664d45768e66248d47c3b1da83935b0d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Various QDateTime tests relating to transitions
* used a nomenclature that made them confusing to thing about; and
* expected identically-initiallized variables to behave differently.
The latter, naturally, lead to "expected fail" tests.
Rewrote the tests to get the date-times they want to test at by means
that avoid the ambiguities inherent in QDateTime's lack of a way to
distinguish the two passes through the repeated hour in a fall-back
(QTBUG-79923) and added commented-out tests indicating what should be
true once that ambiguity is resolved. Verified the DST status is as
expected in the cases where that's the correct distinction between
date-times with the same date and time. Renamed various things to
(hopefully) make them more intelligible.
In the process, purged some leading 0s from numbers in code.
Fixes: QTBUG-68936
Change-Id: Id7a348995238b70dcb81a96edb8a3fa5315f86fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test uses a 64-unit array and deliberately clears various portions
of it, provoking a gcc warning:
warning: ‘memset’ used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
The calls to memset() do, in fact, have a sizeof(T) factor in their
size. Suppress this warning for the duration of that test.
Change-Id: I7d144d655a75f5ef4449fa3b956f80bcc509a83b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Small change needed to make QString_char16 and QString_QChar return -1
in this case, but other combinations already returns -1.
[ChangeLog][QtCore][Behavior Change] QString::indexOf(QChar) and
QString::indexOf(char16_t) now treat a negative start-position, from,
bigger than the string's size as invalid. It previously
clipped such start-positions to the start of the string, inconsistently
with other QString indexOf overloads.
Change-Id: Ic56c8a558bf40a94845c649647db569892d4df02
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QStringList::sort() wants to use the C locale; but, if it failed,
it left that in force, since it only restored the prior locale on
success. It should also use C.UTF-8, since Qt now wants UTF-8.
Change-Id: If62e3d8da682081bf969075a719d03caebf09233
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We use UTF-8 locales by default since Qt 6; and relatively few systems
have the encoding-unspecified locales we were trying to use, with the
result that the setlocale() calls all failed.
Task-number: COIN-689
Change-Id: Id791ba269bf4abac29da3daa4fd01684ca9caa7a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Because they were followed by a QVERIFY(false), no-one noticed until
now. Dates from 2011, when ICU support was first added. I guess
someone fixed the problem in the intervening decade.
Change-Id: I847816c297156e65397c652767f286bc4de193a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without the overloads using QLatin1Char in QL1S member functions results
in the QL1Char being converted to QChar and QL1String being converted to
QString.
Change-Id: Ic19545539a207f025a6293f0b2d929de475dc166
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In my prior attempt to handle the last second of 1969, I forgot that
the QTime we're describing is a local time, so whether *it* thinks
we're at the last second of the day is beside the point. Fortunately,
preceding second should get -2 as return if mktime()'s initial -1
actually meant the last second of 1969, so we can test via that, after
a cheap pre-test to save doing this too often (albeit we only even
attempt the check if mktime() returned -1 in any case).
Restructured qt_mktime() in the process to deal with the error case's
early return promptly instead of doing it in an else clause. Also
repackage the calls to mktime to isolate various quirks and simplify
the logic in qt_mktime(). This also prepares for setting tm_isdst as a
hint when we know when we came from, in massageAdjustedDateTime().
Refined one test, added two more test cases. These didn't fail before
this fix, but a judiciously-placed qDebug() in testing revealed that
localMSecsToEpochMSecs() resorted to its fall-back handling - as if
the date-time were outside the time_t range - due to qt_mktime()
failing, for these test-cases (and several others). This fix evades
that fall-back behavior; a judiciously-placed qDebug() shows none of
our test-cases now fail callMkTime().
Change-Id: I11aa5015191dc4a565c28482307f7bc341c207e7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In setMSecsSinceEpoch(), the CET end-of-time is invalid anyway, so a
whole block (rather than just one sub-test of it) was irrelevant for
the max-qint64 test case (aside from verifying cet *is* invalid).
Split out to a separate test the part of a data-driven test that was
the same for all data rows. Reworked several ill-advised ways to use
QSKIP().
Change-Id: If757d3e722c81fc42a87256125ceef605b6bfb64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before Unicode 4.1.0 there was an error in the example code for Hangul
normalization that used <= on the ends of some ranges of values, where
they should have used < tests. This was faithfully copied but the need
for correction has only lately come to light.
Thanks to Ma Lin for pointing this out and providing the fix and
test-cases.
Fixes: QTBUG-71894
Pick-to: 6.2 6.1 5.15
Change-Id: I5c7fec1f9fac1f7a25b2d5e9c3109a90a7ff49e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do a quick check whether the type name contains an anonymous type. If
so, do not try to use optimized version. The simple check should still
be faster than calling normalizeType unconditionally.
Also only apply the faster version for clang and gcc, instead of all
non-MSVC compilers. Applying it to other compilers would require further
testing to handle anonymous structs.
Moreover, remove space before '(', which is necessary for function
pointers.
Fixes: QTBUG-94213
Change-Id: I795d1964f7a68daa6f9a5f262816d51ee7728788
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Previously, for locales other than the system locale, no entry was
added to the list for the actual locale whose variants - with and
without likely sub-tags - were being appended. In most cases the
standard name will in fact coincide with the variant without likely
sub-tags, so this was unlikely to cause a problem, but it should be
present regardless.
At the same time, turn tst_QLocale::uiLanguages() into a data-driven
test and add another row to its table.
Change-Id: I5cb2d805d78fc3415d82b169caa6154b0f284708
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Previously, the augmentation wasn't being applied to the system
locale, due to a mistaken test claiming the locale's name didn't
resemble the string from which it was constructed. The test dates from
before various fixes to likely sub-tag processing that should make it
redundant now. This makes QLocalePrivate::rawName() also redundant
(and its conversion of QLatin1String to QByteArray relied on '\0'
termination which wasn't actually present in the various codes).
Expanded the test of systemLocale() to also test uiLanguages() turns a
single entry into the list we expect; and add two new test-cases.
(The test uses a mock system locale class, making this independent of
the platform backend.)
Fixes: QTBUG-92234
Pick-to: 6.1 5.15
Change-Id: I0cdf6eae152a42dc377f4ea3e62c282ff4be1764
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Once we're in ~QObject, only methods of QObject are still valid.
Notably, no setter of any derived class is still valid. Thus, to be safe
we must no longer react to binding changes of those properties. To
ensure that this happens for QObjectCompatProperty properties, we
explicitly clear the binding storage.
Fixes a particles3d example crash.
Change-Id: I10d2bfa5e96621ce039d751cffaf3ac41893623e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The change in 004e3e0dc2 introduces
Windows junction awareness, though users were still unable to resolve
the junction target. This change adds the ability to solve this.
Fixes: QTBUG-93869
Change-Id: I9f4d4ed87b92e757f7b6d8739e2a61b58c096f63
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Split the code out of QDir::fromNativeSeparator into a separate
reusable function to remove the above-mentioned prefixes. Fixes
and unifies behavior if the prefix was given with slashes instead
of backslashes. Add a couple more test cases.
Fixes: QTBUG-93868
Pick-to: 5.15 6.0 6.1
Change-Id: Ibd94ae283e2fb113f9c2db97475fbc7d89522bbf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Calling create_mapping in setSourceModel as introduced by 8455bfee76
can lead to an early call to filterAcceptsRow, and some existing applications may crash.
It is also an incomplete solution since it was only done for the
toplevel index but not for child indexes.
Instead, go back to creating mappings on demand.
This means coming up with a different fix for QTBUG-87781 (dataChanged
not emitted for indexes that haven't been mapped yet, i.e. not queried
or shown anywhere).
When this happens, we can't know if the index was previously filtered
out or not (for lack of a dataAboutToBeChanged signal...). Creating
the mapping with the new data only gives us the new state of affairs,
there's no reference state to compare to. Therefore, when the mapping
is missing (during dataChanged handling), create it, but skip all the
logic about row insertion/removal, just forward the dataChanged signal
if the row isn't filtered out.
Creating the mapping might require creating first mappings for parents,
recursively, which wasn't done anywhere in QSFPM yet, hence the new
create_mapping_recursive() method.
In addition to all this, the handling of removed items was incorrect,
remove_source_items did nothing if the parent was gone, and then
source_items_removed was trying to adjust indexes in an incorrect list.
If the parent is gone, clear the proxy_to_source list, so there's
nothing to adjust afterwards. This bug actually doesn't happen anymore
in this version of the patch, but the change still seems right and might
prevent repeating a long debugging session in the future.
Thanks to ChunLin Wang for the unittest in this commit.
Done-with: ChunLin Wang
Pick-to: 6.1 6.0 5.15
Change-Id: Id543d0cc98f1a03b5852bda01d2f49b980e06be7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Both functions now return a result object. Eliminates the need
to pass the errorMessage out-parameter. Adapt auto-tests.
Change-Id: I110b68fedc67b01f76796c44fa55383b2cc03460
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test connects finished to the groups clear method, which in turn
deletes the animation instance. Thus, no member must be accessed after
calling stop, unless we use a (costly) QPointer to guard against
deletion.
Notify earlier that totalCurrentTime changed to avoid the issue.
As a drive-by, modernize the connect in the test.
Fixes: QTBUG-94143
Change-Id: I923101107b7f79115be69a58c8e8d5177a98d48f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The JNI interface expects a const JNINativeMethod[] and our wrapper
takes a non-const. Also, this was causing refactoring of exisisting code
with a const JNINativeMethod[] to fail because the call expects a
non-const.
Change-Id: If790c401650cb33fe31f93bafe41aab7714488e9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QPropertyChangeHandler is a templated class and it's argument is
a functor. That makes it inherently cumbersome to use the class
in any context where the change handler needs to be stored.
Introduce a QPropertyNotifier class that stores the functor
in a std::function<void()>, and add a QProperty::addNotifier()
method that can be used instead of onValueChanged().
Also make QPropertyNotifier default constructible.
This significantly simplifies the code that needs to be written
and makes it possible to store notifications as class members
without major hassle.
Fixes: QTBUG-92980
Change-Id: Id5b7baec093b9ac0467946cded943d92ad21030b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This replaces QtAndroidPrivate::runOnAndroidThread{Sync} calls.
This also now allows passing std::function<> that can return values,
and not only an std::function<void()>.
This adds some tests for this calls as well.
Fixes: QTBUG-90501
Change-Id: I138d2aae64be17347f7ff712d8a86edb49ea8350
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When adding an offset from UTC, arithmetic may overflow. Likewise
when combining a date and time (that have been offset for UTC). Also
check the return from epochMSecsToLocalTime(), as it can fail; and pay
attention to the status stored by setDateTime(), to notice when it
hits an overflow. Fixed some tests that only passed because we
neglected these checks. Extended a test to check we detect overflow in
a couple of cases close to the extremes.
Change-Id: I127a670302f94a07bb9b087b1b9c608b7c08785c
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime has long followed a convention of ignoring what it knows
about time-zone transitions before the epoch. This produces unhelpful
artefacts (such as an ahistorical spring-forward skipping the first
hour of 1970 in Europe/London, which was in permanent DST at the time)
and complicates the code. It documented that DST transitions were
ignored, but in fact ignored all transitions prior to 1970 and simply
assumed that the current time-zone properties (half a century later)
applied to all times before 1970.
This appears to be based on the fact that the MS APIs using time_t all
limit their range to after 1970. Given that we have to resort to
"other means" to deal with times after the end of time_t, when it's
only 32-bit (and after year 3000, on MS systems), we have the means in
place to handle times outside the range supported by the system APIs,
so have no need to mimic this restriction. (Those means are not as
robust as we might want, but they are less bad than assuming that the
present zone properites were always in effect prior to 1970.) On
macOS, the time_t functions only reach back to the start of 1900; it
reaches to the end of its time_t range and Linux covers the whole
range. Given this variety, the range is now auto-detected the first
time it is needed (based on some quick and dirty heuristics).
Various CET-specific tests now need adjustments in tests of times
before the introduction of time-zones (when they are in fact on LMT,
not CET). The systemZone() test of QTimeZone can now restore its
pre-zone test cases. Various comments on tests needed updates.
[ChangeLog][QtCore][QDateTime] Available time-zone information is now
used to its full extent, where previously QDateTime used LocalTime's
current standard time for all dates before 1970. Where we have
time-zone information, it is considered reliable, so we use it. This
changes the "best efforts" used for times outside the range supported
by the system APIs, in most cases giving less misleading results.
Fixes: QTBUG-80421
Change-Id: I7b1df7622dd9be244b0238ed9c08845fb5b32215
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There were two problems here: first, qHash(std::pair) must be declared
before qHashMulti that might call back to qHash(std::pair) (i.e., a pair
with one element that is also a pair). But moving the declaration above
causes the second problem: the noexcept expression can't refer to qHash
functions that aren't declared yet. So we forward-declare a constexpr
function for that result, but implement it far below.
Fixes: QTBUG-92910
Change-Id: Ia8e48103a54446509e3bfffd16767ed2e29b026c
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 37e0953613 added a to-do, but we
can actually change the type, since we've documented since Qt 5.10 that
setting a non-zero value (aside from -1) with qSetGlobalQHashSeed was
not allowed. Storing a value to be reset later is simply not supported.
Change-Id: Id2983978ad544ff79911fffd1671f7b5de284bab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The check is over-arching. is_move_constructible is sufficient;
we don't have to support "ridiculous" types that are copiable but
have deleted move operations (such types are fundamentally broken).
This is in line with the Move* (legacy) named requirements.
Change-Id: Idc7116b39013501b9be39628a4e7afd35fe15530
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
There was previously no way to compare QByteArrayView to with another
QByteArrayView case-insensitively without allocating memory.
[ChangeLog][QtCore][QByteArrayView] Added compare(), enabling case
sensitive and insensitive comparison with other QByteArrayViews.
Change-Id: I7582cc414563ddbde26da35a568421edcc649f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After commit 3966b571 the function was kinda broken already, though
this got unnoticed since it was not covered by an the auto-test.
This commit adds another test case with Windows native separators
and removes the use of QDir::fromNativeSeparators. Instead use the
original code from QDir::fromNativeSeparators to replace the backslashes.
Pick-to: 5.15 6.0 6.1
Change-Id: I190560d0e75cb8c177d63b142aa4be5b01498da2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QItemSelectionModel has the property selectedIndexes with
the notification signal selectionChanged. When a row is deleted
or inserted above the current selection, the row number of the
current selection changes and thus the return value of
selectedIndexes changes. This should trigger its notification
signal.
This signal was not emitted. This patch fixes this and
adds a unit test to verify this.
[ChangeLog][Important Behavior Changes][QtCore]
QItemSelectionModel now emits the selectionChanged signal
if only the indexes of the selected items change.
Fixes: QTBUG-93305
Change-Id: Ia5fb5ca32d658c9c0e1d7093c57cc08a966b9402
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
"Cherry-pick" of C++2b's std::to_underlying.
[ChangeLog][QtCore][QtGlobal] The qToUnderlying function has been
added, to convert an value of enumeration type to its underlying
value.
Change-Id: Ia46bd8e4496e55174171ac2f0799eacbcca02cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not just a compile-time one (that the macros compile and don't
raise warnings).
Change-Id: I5642bf242a6c26a33730708f3c1710237fc107a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no reason to be storing `int` in the array data header and
then using it as a QFlags. Just store the QFlags.
Change-Id: I78f489550d74d15a560dacf338110d80a7ddfdd2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFlags was lacking a named function for testing whether a QFlags object
contains _any_ of the bits set by a given enumerator/other QFlags.
Drive-by, add testFlags taking a QFlags, not just an object of the
enumeration; and simplify the implementation of testFlags to more
closely follow what its documentation says it does.
[ChangeLog][QtCore][QFlags] The testFlags, testAnyFlag and
testAnyFlags functions have been added.
Change-Id: Ie8688c8b0dd393d34d32bc7786cdcee3eba24d1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While at it, move tst_android under corelib/platform/android.
Change-Id: Icf91cd75cb5e04d03fe6a81d52fba52a485ca41f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Since we changed binding evaluation to be always eager, we notify and
evaluate all bindings as soon as any dependency changes. This includes
bindings which have been initially installed on a property, but which
were later removed.
With lazy evaluation, we would only notify those bindings and mark them
as dirty, which is unproblematic. With eager evalution, we attempt to
evaluate the binding, though. While that part is still fine, afterwards
we would attempt to write the new value into the property. However,
there is no property at that point, as the binding is not installed.
Instead of adding a check whether the propertydataptr is null, we skip
the reevaluation completely by removing the bindings observers - and
thus the cause for the binding function's reevaluation. As soon as the
binding is set, we reevaluate the function anyway, at which point we
also capture the observers again.
Task-number: QTBUG-89505
Change-Id: Ie1885ccd8be519fb96f6fde658275810b54f445a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
