Previously, it went direct to QTestResults::addFailure() without going
via the checking for expected failure. Add QTestResults::fail() to
take care of this checking, as for verify() and compare().
Tidied up the code implementing expected failure and QFAIL(), while I
was about it. Adjusted an existing test to verify that expecting a
QFAIL() works, by using QFAIL() instead of QVERIFY(false).
Remove the QVERIFY(false) whose comment brought this to my attention.
[ChangeLog][QtTestLib][QFAIL] QEXPECT_FAIL() now correctly anticipates
a subsequent QFAIL(). Previously QFAIL() counted as a fail regardless.
Change-Id: Icc28cf70e5ff3006363791ea03aa01f2f591eb71
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Cast size_t return from std::vector explicitly to int to silence compiler
warnings.
Change-Id: I0c425b3cec7feec0712e1173ab7e60b28695d6d7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When inserting rows to a branch with no columns
the tester should not complain about indexes being invalid
Pick-to: 6.1 6.0 5.15
Change-Id: I466f4e5140b10f6dcf65a71f109c2d3be7336507
Reviewed-by: David Faure <david.faure@kdab.com>
When rows are removed from a model with no columns,
the test should not report a problem if indexes are invalid
Fixes: QTBUG-92886
Pick-to: 6.1 6.0 5.15
Change-Id: I7a042dfdb2575f87208a00cbed13db3869807f84
Reviewed-by: David Faure <david.faure@kdab.com>
We are still using Catch2 2.11.3 which is not adapted to Apple
silicon yet. This patch backports the required change
from Catch v3.0.0-preview.3.
Change-Id: Ifa14a1fdd6cd1f661c94a0a78648cb01bd9699c1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Wayland does not support WindowActivation capability, which
will trigger a warning in qWaitForWindowActive(). Since the
selftests depend on matching the exact output of the tests,
it gets confused by this, even though the tests are passing.
So we suppress the warning when the capability is not
supported.
Change-Id: I1e1f530a7b237183ee4ef123618e868b746ba863
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add an enumeration for system-out and alog element
for it. Redirect the messages types that are not warnings/errors
to this element. For compatibility, write it out only
if it is not empty. Rename enumerations and members accordingly.
[ChangeLog][QtTestLib] In JUnit XML, output that is
not a warning/error is now logged under <system-out>
instead of <system-err>.
Fixes: QTBUG-86540
Change-Id: I55598eafa7dafa486ac5a8221029c332ff47413b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Generate the expected files in the source tree,
removing the need to copy them over
- Add proper option parsing, add options for formats
and to skip the callgrind test, which locks up
- Determine the script location by __file__
- Determine the Qt version by reading the .cmake.conf file
- Introduce f-strings
- Print the usage when invoked in the wrong directory
Task-number: QTBUG-86540
Change-Id: Idabb50a14db60127374b7a1271951dbbbc85d131
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This is standard for all test cases. It matters, because cmake targets
are generated, and e.g.
$ ninja tst_qabstractitemmodeltester
should do what the user expects.
Change-Id: Iac8160c53d5005382e61c03b7daceaba0a4c2596
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This test was failing but was returning a pass because of a bug
in androidtestrunner.
Task-number: QTBUG-88507
Task-number: QTBUG-88508
Pick-to: 6.0
Change-Id: I4fda7c2ddf8cd1e6858617e7bb447078c5768a75
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The RegisterMethodArgumentMetaType had been changed to take a QMetaType
instead of a type id in 0161f00e50.
Unfortunately, the usage of it in QSignalSpy was missed. This patch
adjusts the metacall to correctly use a QMetaType.
Moreover, use parameterMetaType instead of parameterType to benefit from
metatypes which are already resolved at compile time.
Task-number: QTBUG-88260
Fixes: QTBUG-88356
Change-Id: Id8fa46581a005d62818971ea24d8aa2e39dcd6d0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Otherwise XOpenDisplay in a newly spawned process may fail with
a 'No protocol specified' message (as it recently happened in
CentOS 8.1 vm).
Fixes: QTBUG-87621
Pick-to: 5.15
Change-Id: Ib6c08c7f154fb2a126d32a4aa52b535e5daa1589
Reviewed-by: Liang Qi <liang.qi@qt.io>
The old test harness used to spit out stderr only, but
to be on the safe side we spit out both.
Change-Id: Ib8e57fd1b0e4d8542ac552a6fe58c07016df7f5f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
addBFail() asserts on the file being non-null. The convention seems to
be "Unknown File" for cases where we cannot determine the file.
Change-Id: I3a4d0130352d77d75f264fad6f3bd47c6700ef4c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As defined by https://llg.cubic.org/docs/junit/
Change-Id: Ic7683f3d49c529674f8467d591528d4a65d3add8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The attributes are, like the elements, maintained in reverse
order in the underlying QTestCoreList, so we need to iterate
them backwards when printing out the resulting XML to reflect
the order they were added.
This results in e.g.:
<testcase name="passingBenchmark" result="pass">
Instead of:
<testcase result="pass" name="passingBenchmark">
Change-Id: Ic2eeab8de05ffedd0c41977358d5b40ff77878b1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It doesn't understand the arguments we usually pass to testlib.
Change-Id: Iea83d1d8c31a510b2bc442cbfc810eac631322e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't want the signal dumper to pick up signals that our own
test machinery produces, such as the ones emitted from the watchdog
thread startup and shutdown. This would otherwise produce:
tst_Signaldumper::initTestCase() Signal: QThread(7fc969e0d870) started ()
At startup, and at shutdown even more confusingly:
tst_Signaldumper::UnknownTestFunc() Signal: QThread(7fc969e0d870) finished ()
Change-Id: I9e81fa168eaa92551d38d5576973bbf95ac23364
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The logic was changed in eb52d78e90 to only produce a single
result for all the benchmark iterations, but only the plain text
output was rebaselined. This was not caught by the test since we
only run this test with the plain test logger. Regenerating the
results with the python script however runs it with all loggers,
so let's fix the baseline.
Change-Id: I9ebe8a59ac3ab36694a739f98dbfffbae9a08552
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't want to print the QString as represented by the debug
operator, but instead want to expand line feeds and other character
codes as normal.
Change-Id: I7261d8f94e7b4382733f06eb22f9a740a5c0488f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Hardcode the tests which were previously scanned from the source.
See qtbase/24e83de8d1924b8003c84f1df05b7befea2c5120.
Change-Id: I8fb05568977f86726b20948a9c2d1cfce5cba161
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This change only happens to files touched
by the commit to add missing ; to Q_UNUSED.
Task-number: QTBUG-82978
Change-Id: I10e6993a2bb3952cf9a262708b8573550e0dbe63
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
