This patch makes sure to store unchanged filenames as taken from qmake
into the scopes it creates.
The scopes are then kept longer: Merging/including scopes is handled by
adding the scope to a private _included_children member of the parent scope.
The methods to access data from scopes are then changed to take the
_included_children into account and a new "get_files" method is added,
that does all the necessary mapping to handle scope-dependent things like
$$PWD, etc.
This makes sure src/network is converted correctly incl. all the .pri-files it
includes as well as src/platformsupport/themes.pro. Both have been troublesome
before.
Change-Id: I28e92b7bcee1b91b248c17201c2729a54a3ce4a1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Include the current directory in the scope __repr__ output to make
it easier to understand where things wrt. include or file names go
wrong.
Change-Id: I09a6c17c6d8d547f1f64801bcde3c2e10c925ee1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The actual variable that contains the architecture is
TEST_architecture_arch. TEST_architecture only contains the value
if the test was performed or not.
Fix the conversion script and all the generated files.
Change-Id: Icb3480832cab894948f4fef03b8bc8187cab6152
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Previously a condition like APPLE AND (NOT APPLE_OSX) got simplified
to APPLE, which is wrong.
This happened by accident due to some sub-family simplifications
involving BSD, which APPLE was part of.
Technically APPLE is BSD derived, but for the purposes of the
conversion script consider APPLE not to be a BSD (hopefully there
should be no cases of using the bsd scope for apple machines in
qmake files.
Also regenerate the fontdatabase project, where the issue was found.
Change-Id: I18dcf4f29ffbff48c183ba95ca2a2e5cd5325d86
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This is used to set the default QPA platform and without it
all Gui applications trigger an assert in QString:-/
This is way simpler than going through configure.json.
Change-Id: I2c053e95c0f7e99e97a0b2918d8e4ac13d3494fd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The ParseResults may be a nested list of list. Now the code doesn't
raise exceptions, but it fails in do_include as includes that doesn't
provide resolved path will fail. Anyway step in the right direction.
Change-Id: Ice44e4c10d221293cc6c1facca30abd5495791be
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
One directory may contain many pro files. The generator was happily
generating the same CMakeLists.txt for all of them (overwriting).
This patch implements a different logic. It tries to find the main
pro file and skips others assuming that somehow implicitly they will
be incorporated (for example through SUBDIRS).
Change-Id: Ie07d75e900a96dd48bf981a896c9dfb920f39a23
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We do not need to validate everything, while converting project
files. Some checks can be left to building step.
It fixes some false positive NOTFOUND errors.
Change-Id: I81ff2421fdea13add0bfc03086152a47bce39908
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
It is regression caused by a0a94576fa
("Fix RemoveOperation").
Add unit test for all operation types to make sure this code actually
works:-)
Change-Id: I97c94cb3411f05de89422e3fa2222f2217a09e49
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The operation was using an empty set as a base, so it was not really
functional.
Change-Id: I98fd80c1ede31994857aa1f0c8947ca7b9f76649
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
We can use all cores. Sadly it doesn't balance cores well as
corelib.pro takes most of the time anyway, but the speedup is
visible from ~15 to 5 min.
Change-Id: Id8209c58491b38d19c6e9f1163d366c3e33a182c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The feature used to be implicitly enabled because qt source ships with
ANGLE sources, and thus ANGLE could always be built. Yet because the
CMake port of ANGLE is not done yet, and because the feature is
implicitly enabled, the build failed when trying to find GLES headers.
To provide a nicer out-of-the-box configuring of the Windows build,
disable the opengles2 feature on Windows, to default to a desktop GL
build. It can be re-enabled once (if) ANGLE porting is done.
After this change, you shouldn't need to pass any additional custom
FEATURE_foo options to cmake to build qtbase on Windows.
Change-Id: I94c96d8ef70cf671d2ce0198311f70b55fa642b1
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake there are at least 2 things to know regarding
sub-architectures and instruction sets.
Which instruction sets does the compiler know to compile for,
represented by the various config.tests and features in
qtbase/configure.json.
And which instructions sets are enabled by the compiler by default,
represented by the configure.json "architecture" test and accessed
via QT_CPU_FEATURES.$$arch qmake argument.
Before this patch there was some mishandling of the above concepts
in CMake code.
The former can now be checked in CMake with via TEST_subarch_foo and
QT_FEATURE_foo (where foo is sse2, etc).
The latter can now be checked by
TEST_arch_${TEST_architecture_arch}_subarch_foo
(where foo is sse2, etc and the main arch is dynamyicall evaluated).
The configurejson2cmake script was adjusted to take care of the above
changes, and the cmake files were regenerated as well.
Change-Id: Ifbf558242e320cafae50da388eee56fa5de2a50c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Report some more qmake variables as used when they are used to decide
which kind of target to write.
Change-Id: Id2602bb8cc07130456c04c53148acb73f21b0f21
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add installation location information into CMakeLists.txt files if
available in CMake.
Change-Id: I498deac71b1cc33c7d30790e32da236afdcb23af
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Handle DBUS_ADAPTORS and DBUS_INTERFACES and turn them into
equivalent CMake statements.
Change-Id: Ia8a69e7ab97d9f18df93097a6e2c7c1686cb16a3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There were a few cases of feature outputs that were handled
incorrectly before this change, specifically:
- publicFeatures and privateFeatures with custom names
- privateFeatures that also ended up writing defines into
public headers
- publicFeatures that ended up in private headers
- internal features (that should have no QT_FEATURE_foo
defines) that were still written to either public or
private headers
The change takes care of all those cases by keeping a map
of which features need to be written along with any visibility
specifications, as well as custom name changes.
Change-Id: I37baeaeacdfe4935128a392c72ca71b5c3ca1c8d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Remove qrc files from CMake. Use add_qt_resource function instead.
Change-Id: I64cdbd9498f97d23cd8e03f34ab5ae4a52dba5af
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Add BOOTSTRAP for tools that need it automatically.
Change-Id: I33b2ec16dfcb09709f844ed232ce9974a9d7c7ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove system-harfbuzz feature and use harfbuzz feature as system
Change-Id: I441345a667450f1c2d19380b0709911011c7ceb7
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Simplify code a bit and add a test for line continuation fixup.
Change-Id: If865bc94d7d419c65d3280b5f9613ebc0d3db74a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Handle for loops with a single line of instructions and add a test
for that.
Change-Id: I041ae30f64abcbd3db7df29933647f047b92ede3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This broke somewhere along the way. Add a test for this.
Change-Id: I106ddff6eb86a51ef132285d1bc623f3b5cf71fb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Ignore for loops in the pro2cmake.py parser and add a unit test for that.
Change-Id: I2a0c075c45cf56f4f24ada2d53e8e8e94ce19f26
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Warn on broken line continuation in .pro-files, but fix up the issue
and proceed.
Change-Id: Ibe68011b312bcea25620ce790a0b44b2983fbd88
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Improve the code that simplifies conditions to take "OS families"
into account. E.g. if a system must be ANDROID, then it is redundant
to express that it is NOT APPLE_OSX.
Change-Id: Ib7e62726c309bf84b9e5e0d6a6e3465511db0ead
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Parse conditions more exactly as before, enabling proper handling
of else scopes.
Change-Id: Icb5dcc73010be4833b2d1cbc1396191992df1ee4
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
And add the eglfs_x11 plugin
We need to actually try to compile the test as the comment it it says
that having x11 and egl is not enough since sometimes they are actually
incompatible
Change-Id: If6bdc08c21b91fa9c41663f2fa653fd59e5ddd2e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
so use map_qt_library instead of map_qt_base_library
Change-Id: I4dd0097fff3ffd9ec4aad36d11d79ea23a08cb90
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This change fixes a few things in one go:
* cmake's FindOpenGL cannot be used reliably to detect EGL. So use a
custom module for that.
* Added a custom module for GLESv2 detection, as cmake's FindOpenGL
does not support that.
* Map CONFIG += opengl to a WrapOpenGL target, which links against
either GLESv2 or libGL - just like mkspecs/features/*/opengl.prf
* cmake's FindOpenGL remains in use solely to detect the availability
of desktop gl.
Change-Id: I9315e5ad1fd88e1b7dc7e920053e98fb51fea7fc
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Added to QtFeature.cmake a way to be able to run feature_module begin
and end without having an actual module by passing NO_MODULE
Change-Id: Ib708bd3878e2591da193d18563c8932cc4b75e7f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since there's only two i hardcoded it for the moment instead of trying
to parse the line
Change-Id: I0da578af64ef9621cbbc78bf6ce15bf8a3f63f1c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since most of the times it means we need to link with some other stuff
Change-Id: I06262d4403225bca7a5e68d47145fefcf6702e5a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We already have a cmake find module for libinput so we know it is there
Change-Id: I153544c5c13cb57b1ce258243ede17f4be9507fd
Reviewed-by: Liang Qi <liang.qi@qt.io>
There is no need to try and avoid extra () and NOTs: Those will be
removed by sympy later anyway.
Change-Id: I39d3e4d1d829579e532bfbbf6c69e0f1e06e9a22
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Treat ANDROID_EMBEDDED as ANDROID when simplifying conditions.
Change-Id: I2cf0ea1e1a3e882e3a7b7276867dcee452866ade
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Do not go into an infinite loop when replacing a variable with itself.
Change-Id: I2765b1c0c567753f26ca75e0533c1d193362b456
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
This adds an overly simplistic mapping -- just like it does for the
rest of the qmake test functions.
Change-Id: I0c9e3b70c1c3d0c68a245706a141aa7b7cb4d8bf
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Expand qmake values when dealing with source file names, include
directories and more. This handles cases where variables are used
to refer to sources (e.g. $$VERSIONTAGGING_SOURCES in corelib) as
well as things like $$QT_SOURCE_TREE and friends.
Note that $$PWD and $$OUT_PWD are still need hand-holding since they
refer to the scopes directory relative to the top level directory --
which pro2cmake.py does not know.
Change-Id: I011ef55416ff820053d5f844b3008836849f5075
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
.pro-files support things like contains(Foo, bar), etc.
Map that in such a way that only one identifier will be visible to
CMake to unconfuse the logic handling on that side. These conditions
will need manual fixup later!
Change-Id: Id4946e694a9adccf9f54bcce26a6c227cd921007
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Remove leading './' from paths before writing them into CMakeLists.txt.
Change-Id: I5680a3470cf491a8805b559197f94f8e6a6ce9b7
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Fix handling of things like:
foo:bar:buz: {
do something
} else: wat {
do something else
}
The else relates to foo AND bar AND buz, not just to buz in this case.
Change-Id: I40d1fa295b4d6dd95ae5e1ce2d58372edc807b86
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Map the dlopen feature to 'ON'. The effect is that cmake will figure
out whether or not linking to 'dl' is necessary or not.
The user-visible feature is 'library' anyway: That enables dynamic
library loading -- and will link in 'dl' as needed.
Change-Id: I0d68275a7234efba7f926150f120bb37b4a1163f
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add all the XCB and X11 libraries needed for the XCB plugin.
Change-Id: I772b99c68521cd46cbba736912c8d8594d9d2ad8
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Dump scope trees for all scopes that contain a variable
'PRO2CMAKE_SCOPE_DEBUG' (set to any value).
Change-Id: If17bb1697a32ccaa427a858c2330ab2b019d0fa8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This makes scopes much simpler to destinguish from each other.
Change-Id: I1af42f181b5899aba749bcf9267a345385149f90
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Show the total_condition (if set) when dumping a scope.
Change-Id: I9dfe98c2251f1d28881771042f17d723cedc8907
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Generate debug output whenever a qmake scope with a variable
'PRO2CMAKE_MERGE_DEBUG' is involved in a scope merge.
Change-Id: I0ad94b881db9930de689c199adbac084efe6c03b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Zstd is used in the dev branch, so prepare for it.
Change-Id: I130d98e3888a1eb4c7444728fc5088c5dae9d911
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Use FindGLIB2 from cmake-extra-modules over hand-rolled own version.
Change-Id: I1f8e055bc12dd728c033fd88480690643d90159a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Convert QMAKE_USE, QMAKE_CXX_FLAGS and QMAKE_LFLAGS into CMake.
Change-Id: I53a5b91664b6ab71892d4381c00f8d744d7d7abd
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Make use of @property to make code a bit nicer.
Change-Id: Iff0bfed57874cf13b7e5f85acde2660a397933d7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Qt 6 will use external libraries for everything, so
default all QT_FEATURE_system_foo to "ON".
Change-Id: I884a4293c64487271be08de5fab82e6858d0a2ed
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Remove scopes with condition 'OFF'
* Merge scopes with identical conditions
This e.g. merges children with a condition that simplifies to
'ON' with their parent scope.
Change-Id: Ieb3d60e1234f189ac45869853555ca8c0cfb5c76
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use pysym to simplify conditions in extend_target.
Do some manual changes to the condition based on domain knowledge.
Change-Id: I7fbb9ebc93b620a483c6a3a796d84c9bc0e36ef7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add some more mappings from qmake to CMake equivalents conditions.
Change-Id: I57b7bea9d6628e1c2b8d6ae88f799219942b571e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure complex things in qmake (e.g. function calls, etc.) are
mapped better to cmake. When there is no way to properly map the
qmake construct, then make sure to map everything into one
identifier.
This is to keep the structure of the condition simple.
Change-Id: I6d88e0cb85fce1041bbfdc96604dab7bd4e65856
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Return the current scope's condition, not the total condition from
recursive_evaluate_scope. That is the part the "else" referrs to.
The parent_condition stays identical for all branches, so that should
not get negated.
Change-Id: I0da91483d4d748d01a29ac16890d709d8d659843
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This should somewhat simplify the generated CMakeLists.txt files,
especially in complex cases like corelib or network.
Change-Id: I208c8f99a64cbb6c97d51dd3ae428bb234982202
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fix pyls warnings in pro2cmake.py as well as its tests.
Change-Id: Ib8ee1daa9b97735d13c0fde43616daa46de9e171
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Report more error conditions in debug dump and make the output
easier to read in the non-error case by wrapping all strings in
"".
Change-Id: I3c99deda3dfa27dcc0c9ce2800bfb891747e6934
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Having a good representation is nice, but unfortunately very hard: pro2cmake.py
sees just a small part of the entire qmake build system at a time, so the information
it has is incomplete to start with. It is not worthwhile to pass the supposedly full
information around -- which will then need to get de-duplicated again -- considering
that the information is not complete in the first place.
So go back to the simplistic approach we used earsier. That is good enough and does not
suffer from the problem of having multi-part arguments getting messed up when the
scopes get de-duplicated.
Change-Id: I553329650d6b8046f7ad8b1282e3d0c961293a28
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This makes it easier to see what is still missing.
Change-Id: I186abd609f20be680ac0943ac89068f764142a79
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Do not add scopes that are going to get merged into their parent scope
as a child of the parent scope. This leads to the information of the
child scope being duplicated.
Change-Id: If4d6a83b9c9eac477959e7774e9cf65fd4df98e6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Indent the individual parts of a scope relative to the scope itself.
This makes things a bit more readable.
Change-Id: Iffbffd69bc960118f9657a1b7fb488da3c7b48dd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This avoids some includes being done several times: We used to generate
scopes for the include files, add them to our current scope and then
traverse the children of the current scope.
Switch the order to avoid traversing the newly added scopes twice.
Change-Id: Icb9c53c9f54772d3305e0fb121824c23d5469e09
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Ignore include files that go into 3rdparty code. Qt 6 should work
with external libraries, so there is no need to drag in 3rdparty
include directories, etc.
Change-Id: I990f3a8a4983e1458843b4122420b9daec763ccb
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Do not needlessly add () and NOT all over the conditions.
Change-Id: If907357306eb3f8ab5b2878bcad5902171a90476
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Make the output of the project structure debug dump more readable.
Change-Id: Ib80b41f7fdb8e14ff878284c46f3760d84f4f004
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: Ieb33141601c29ec2f3c30c6725179f1fb234e53a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Set new keys in the parent scope instead of just appending to existing
scopes.
Change-Id: I901c3f418429d8aed56acb39b1dbe566c5468920
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: Ice9db97db5bf1fb347bff07bcaf91daac87fa983
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do not include the same file over and over again...
Change-Id: Ia0748b9ebe58388549ba23ec7e24ce3d9b738987
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is less self-contained than what we have, but significantly speeds
up cmake configure/generate runs.
This patch also warns when a feature is already defined.
Change-Id: I8cab63e208ba98756b47d362a39b462f5ec55e20
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
CMake comes with a Find module for this, so use it in src/corelib/configure.cmake
Change-Id: I8f4abcb32fb10513d67c3c959310eefaf7b56d3d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add FindSlog2 and use it in src/corelib/configure.cmake.
Change-Id: I7e6a696a49df568a41ed1224228ab608db2dbb0e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Improve conditions/enable/disable conditions for iconv related features.
These are detected a bit different from what qmake does, so adapt to that.
Change-Id: I7b3e4baf05dc324507f370d7f651a62f29e42a98
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Find the PPS library and use the result PPS_FOUND in configure.cmake where
needed.
Change-Id: I08d3ace421278dc0ae5c3128d4234e6bca906c05
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a way to map individual parts of a feature to new values and use
that also to skip features.
Change-Id: Ibddfcbbf9dfac29d460922e991934997b3e8387b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a comment that a library was removed when running into "QT -= gui"
and similar lines.
Change-Id: I17b7922827f228c6b45e1e6867fdc5e316af3781
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Map "qtHaveModule(foo)" in qmake to "TARGET Qt::Foo" in cmake.
Change-Id: I63c251f0f2dfd2e95adc996a83b528e9b4e9636e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
