This saves us lots of .toQString() and .toQStringList() typing when
qDebug()'ing qmake code.
Change-Id: I037e5e1816f2dcb6a20dec4c275f3d886f155ad5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QMake searches a .qmake.conf file to determine the source root of the
project, and a .qmake.cache to determine the build root.
If a .qmake.conf exists but no .qmake.cache in the build directory is
found, a build root would be set that is only valid if the build
directory is at the same depth as the source directory.
The invalid build root resulted in the creation of .qmake.cache files
at "interesting" locations (e.g. high up in the directory tree), a
potential cause for even more interesting build failures in the
future.
Fix this by splitting up the loop that determined build and source
root. Both are now determined independently of each other.
Fixes: QTBUG-76140
Change-Id: Ib5c922b87879fcf2f076298a69abcdbc4e8587b3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
IoUtils::isRelativePath() didn't attempt to consider UNC paths, due to
a belief that qmake fails on them so badly that it wasn't worth the
extra code. However, it turns out Qt Creator's copy of this code does
need to take this into account, so start the change off in qmake's
version so as to keep in sync.
Task-number: QTCREATORBUG-21881
Change-Id: I3084b87c1d3ca6508255e94e04ac8db3ceaebb7e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The read from a QHash needs to be protected too if other threads are
writing.
sync-up with qtc, no actual effect on qmake itself.
Fixes: QTCREATORBUG-21416
Change-Id: I75e5634e11b10056d6dbb6fdceef482ca2222ca1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from qtcreator/5f79b5d2e5e33321cdcd00362f0d6d9442a73ec2)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Also clean up QTextCodec usage in qmake build and some includes
of qtextcodec.h.
Change-Id: I0475b82690024054add4e85a8724c8ea3adcf62a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
turns out that flushing the ids together with the ProFile cache was an
abysmal idea, as the latter expires after a few seconds after loading
the project, while references to the ProFiles (and thus the underlying
file ids) are kept for as long as the project stays loaded. the early
flush would cause re-use of the file ids, which would wreak all kinds of
havoc when re-loading projects.
but just ref-counting the vfs class is insufficient as well, as then the
ProFile cache (which expires after a timeout) could outlive all VFS
instances and thus refer to ids which were discarded and later re-used.
so we ref-count, and additionally let the cache instance hold a
reference to the vfs class.
this is sync-up with qt creator; no actual effect on qmake itself.
amends 190aa94be.
Change-Id: Idd4478ffc1c2405b3b83df32fba45b1f687f6a18
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/d03fb350672d311dccc06f0bcb4da744a3c99745)
(cherry picked from qtcreator/1ddfb443b686ef04cc0e28363308ce70d01f0d73)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It's 160ish lines and adequately isolated. Still, it *might* be
contributing to compilers being slow (unlikely though that seems) so
seemed worth tidying up anyway.
Task-number: QTQAINFRA-2117
Change-Id: I9e55e677552c273fdf3480ccefc229fd6fd2b66a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
make sure the access is properly scoped and does not recurse.
Change-Id: Iaa345cd2771811281b9ed6f634c70235a78c3c33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... and make it explicit where we can't do that for semantical or
backwards compat reasons.
most urgently, this fixes an assertion failure when $QMAKEFEATURES
contains empty paths (e.g., due to a trailing semicolon).
notable observation: QByteArray::split() has no argument for the split
behavior (it always keeps empty parts).
Task-number: QTBUG-47325
Change-Id: I72d4b2e154a2ed1802cfa98fb4a5211a68e43231
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
Change-Id: I7555de5c72a9250b31e20fc60e39680d19882fcb
(cherry picked from qtcreator/2cb7c81e620d224d386860a637dc889acb15435e)
(cherry picked from qtcreator/89868ee2b9093ecf40602ae302b991d6a60014b0)
(cherry picked from qtcreator/03e699ce2985eedcd33d247aa47d04b14bc4bc04)
(cherry picked from qtcreator/61419e7bf0f3bff6dcf63876b05b72c56e60c2a8)
(cherry picked from qtcreator/19eaf87ef95a510351557119a955223a4aeea7b3)
(cherry picked from qtcreator/3080bda0661989e88dfa62101b4c3f5d5e6754a1)
(cherry picked from qtcreator/99714239b616e628ff4e0afe3db7eb7511ccf569)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
Change-Id: I926bc97fe6fa510ac5a8fe77b64014333a69bd04
(cherry picked from qtcreator/8a69c254757eab7852443b5e4bd5eafb68908d3d)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
Change-Id: I34b42bd19e0de973deb2291e91f306d1ca7c630e
(cherry picked from qtcreator/15148d8e4454ff3277131ea52a4204c5fa0b7ab0)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it now does not see anything except regular files and directories any
more. that's not expected to be a problem, given the function's scope.
Change-Id: I53063ad8cacb3afe5cc1baf6d6d5feba3465e74f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/cf82f210804151452fce3cddb3cb2793dab976eb)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
when the QFile object is already constructed, querying whether the file
exists is actually cheap, so do it right away instead of later on
demand. that makes the calling code a bit cleaner.
fwiw, that we need to explicitly query the file's existence at all is a
result of QFile's completely useless error "codes" (which merely say
which function failed, as if the caller would not know).
Change-Id: Ifec39d05b1713d8128046f679287e510f10e45dc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/5ba32e3484ead2e35cc7732dcd59a97e7459dbfd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
just a sync-up from lupdate; no effect on qmake itself.
alternative source: qt-creator/7e86b98836342035684cc1c1aa49292224faed07.
Change-Id: I5e10b44637d527799f55c578a99076eb4750f131
(cherry picked from qttools/8e7e60dbdea04c943bc6d50290db12d3fefd39f2)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Thanks to QTBUG-61373, this qmake function was called with
/usr/local/5.10.1 as baseDir, which isn't absolute, leading to an
assertion failure. We could raise the error within qmake but it
proved easier to simply resolve any non-absolute baseDir using PWD,
before trying to use it as an absolute path.
Did the same for $$absolute_path(). Documented both. Adjusted the
assert that caught this to report any non-absolute path that upsets
it. Added simple tests, fixed an existing test.
Task-number: QTBUG-66156
Change-Id: Icfef2e2f5b236e071177c9beffa38d71bf404292
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For Q_OS_WIN, a path is only truly absolute if it includes a drive
letter; merely starting with a slash is not enough. (We can't support
UNC paths, so don't even try: qmake runs various commands in the
source directory using CMD.exe, which doesn't support UNC as PWD.)
This requires, when resolving a path relative to a root, transcribing
the root's drive to such not-quite-absolute paths.
Changed QMakeGlobals, $$absolute_path() and $$relative_path() to now
use IoUtils::resolvePath() rather than delegating to QDir's absolute
path method, since that doesn't correctly recognize the need for a
drive letter (and qmake did run into problems with some paths, from
splitPathList and a failing test, as a result).
Moved existing ioUtils tests for handling of relative / absolute paths
out into separate functions and expanded significantly. Fixed some
existing tests to use an absolute path where one is needed; added two
tests involving driveless (but rooted) paths; and fixed the test init
to set a value for QT_HOST_DATA/src property (the lack of which lead
to an assertion failure with this fix).
Task-number: QTBUG-50839
Change-Id: I2bfc13c1bfbe1ae09997274622ea55cb3de31b43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
the replacement value may well constitute the whole output string - this
is in fact common, given this rather typical usage pattern:
BAR = $$replace(FOO, -flag, -otherflag)
this must be considered when constructing the return value.
compare 3c8134958c.
as of now, this is irrelevant, as QString::replace(QRegExp, QString) will
always memcpy the replacement into a detached copy of the target, but one
never knows.
Change-Id: Ia1f271f45023746040fc28ce6d88a6609e05e5c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
technically, we should not rely on the i/o classes not storing the
strings beyond the instantiated object's life time.
Change-Id: I0990769b3cf86860184869036c096c531160e9be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
property values are de-facto guaranteed to be backed by full QStrings,
so there is nothing to be gained from using the raw data optimization,
while doing so risks raw data leaks.
Change-Id: I3d43da9aaadd4d5811c4b1a9d7ac734049da423c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's not clear why detaching would be necessary; there is no danger of a
raw data leak here.
concatenating a QStringRef with a non-empty QLatin1String (the only
expected use of this overload) will yield a detached QString anyway, so
this makes little difference in practice.
amends f137957e08.
Change-Id: I521c0e89a8b0c1ae62b1450e81b0ae91a931bcfa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
no m_tmp is involved any more in this code path; it uses QStringRef.
amends 11d957d043.
Change-Id: Ib272d61edfb150a549c5e6a9a60d53502702e802
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the m_tmp array is a member, so the index toggle for accessing it also
needs to be one - otherwise, odd iteration counts will defeat the
mechanism.
Change-Id: If7a800ed5a4b4168625daf1ebbd5d2d164569d8e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... in $$basename(), $$dirname(), and contains(). the latter case is
marginal, as it only applies to mutuals which are regexes, which i don't
remember ever seeing used.
QRegExp saves a copy of the matched string, so it's necessary to
alternate between two temporaries to avoid detaching. we already
did that in most places.
Change-Id: I97b8294585c17c76d1756f83971f42cb88353af0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in most cases, the main advantage is not using toQString(m_tmp), which
reduces the possibility of raw data leaks. in cases where we used
toQString() without temporary, this is a slight optimization.
Change-Id: Ib343acffd383aa2c4fefab75fb52762fb534dfc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The strings remember in which file they were created/assigned.
However, this used a non-counting reference to a ProFile, which could
become dangling. If a subsequent ProFile re-used the exact same address,
a string's source would be mis-identified, which would be fatal in
conjunction with discard_from().
Since we actually need only a unique id for comparison, let's use an
integer for that.
Task-number: QTBUG-62434
Started-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I395153afaf7c835d0119690ee7f4b915e6f90d4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Similar to the two parent commits, this patchs preserves the time stamps
of files we install as a result of recursive directory copying.
Change-Id: Id5931a467196d5cd67acfa0deffc2488af8a3669
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
