A number of QDateTime functions directly use or modify the data stored
in the private, but future changes to store msecs and status make this
maintenance more complicated. Where possible simplify this code to use
the standard msecs functions, standard constructors, or public api
instead. This greatly simplifies the functions and the following msecs
storage code changes.
This is an intermim step towards storing the time in msecs. Some
functions will be slower as a result of this change, optimization
will take place after all the msecs changes are completed.
Note this also removes a test that used valid QDates outside the range
of msecs, this change in behavior will be documented in the final
mscs change.
Change-Id: I6ef710f24babc7024091010064082e9be0b5bbfe
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test the Daylight Time transitions. QDateTime does not correctly deal
with many of these scenarios so those tests are marked as QEXPECTFAIL.
These bugs will be progressively addressed in coming commits.
Change-Id: I01eba9d6143a792f081542cb198e221efcf28e98
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The "base64url" encoding is defined in RFC 4648, which is the newest
version of Base64. There are also a few situations where the ending
'=' is not desired.
Change-Id: I9bb9fa55817b57d125189e4e795d6fde97caea6d
Reviewed-by: Richard J. Moore <rich@kde.org>
Add new public api to get and set the number of msecs since the start
of the day. Modify QDateTime to use the new msecs api.
[ChangeLog][QtCore][QTime] Added new methods fromMSecsSinceStartOfDay()
to create a new QTime from an msecs value, and msecsSinceStartOfDay()
to return the QTime as the number of msecs since the start of the day.
Change-Id: I285b725b883f1f5524fda87ca81bd64ed99fe6f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
This avoids dynamic construction of the private class. According to
the benchmark we go from 4,550 to 3,900 instruction reads per iteration.
(without change 32629676 the baseline is 5,600)
Change-Id: I5df925e30dbd49bdde87173e481820574ce5abe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure we don't modify the lhs. Instead copy it and advance the
copy.
Change-Id: I3440e8e175bfc299f8f83b816faca54fa3f79e43
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A module plugin in qml belongs to a URI/namespace. This
uri is resolved run-time by QtDeclarative by knowing the
path of the qmldir that references the plugin.
For static plugins this becomes a problem, since we lost
the information regarding which plugin belongs to which
qmldir, since a static plugin has no file path.
To avoid pushing the responsibility of clarifying this
onto the application developer, it is better to embed this
information into the meta data of the plugins themselves.
Since this information can be resolved by the
build system, a new option to moc has been added:
-M<key=value>
that will let you add meta tags to the meta data from
the command line to each class that has an IID specified.
For the URI case, we can then e.g do:
-Muri=QtQuick.Controls -Muri=QtQuick.Controls.Private
Change-Id: I81a156660148fc94db6f3cac0473e9e1c8458c58
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These structures do not need to be packed. With some compilers, Q_PACKED
was defined to be empty, which means that the code was working fine
without packing. Or there were some lingering problems on those
platforms (MSVC) and we're now exposing them in all platforms.
Actually, it shouldn't be a problem anywhere. QCharAttributes, quint24
and QFontEngineQPA::Glyph have only char/uchar members, so they're
packed already (they have alignof == 1). The only platform where that
wasn't true was ARM OABI, which we don't support anymore.
QFontEngineQPA::Header seems to always come from a QByteArray, so it
doesn't neeed to be packed either. However, just to be sure, I'm
inserting a check for alignment.
And QFontEngineQPA::Block isn't used anywhere.
Change-Id: Iacfa25edf336ef2a03aeb6e40ae90937a21661ae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Any known smart pointer in a QVariant can be handled in this way. The
metatype system can be informed of new smart pointer types using an
existing macro which is now documented.
This is very similar to the existing infrastructure
for containers.
Change-Id: Iac4f9fabbc5a0626c04e1185d51d720b8b54603d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
New functions left, right, mid were missing in the api.
Change-Id: I3590a84431555d009d5012b204c111385bdceed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
which would interpret 'path' as a hostname.
The check is in the public setPath so that the internal one can still
support parsing URLs such as ftp://ftp.example.com//path.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
normalizes the path given in setPath, removing ./ and ../ and duplicate
slashes.
Change-Id: I05ccd8a1d813de45e460384239c059418a8e6a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-DKEY="VALUE" was correctly turned into -DKEY=VALUE,
but -DKEY=\"VALUE\" was turned into -DKEY=\VALUE"
due to the erroneous check ('quote' is still 0 when
encountering the first '\' character).
This fixes QCoreApplication::arguments() as used by
moc.exe after porting to QCommandLineParser.
Further investigation shows that double-quotes and single-quotes
are handled differently. The tests now ensure that this parser
respects what Windows sends in argv, and in particular that
QTBUG-15379 doesn't regress, as well as fixing QTBUG-30628.
Task-number: QTBUG-15379, QTBUG-30628
Change-Id: I95062c9a6022632b321b2f6fae3089f07be7b5c6
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As of 5.0, this always return true.
Change-Id: If225c7219e283da97e870f0d66a87b21c3cacfc0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Replace that need with a macro so that registration of the
container helper conversions is done at the time of registration
of the container (usually when it is put into a QVariant).
Change-Id: I823fb3fdbce306ebc9f146675ac43724cec678d5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMap explicitly sorts its entries by key value. For an ordered container
it's (often?) useful to access the first or last entry, for instance to
quickly compute the next key of the mapping. The first entry is easily
accessible by the STL begin() method, but for accessing the last entry
pretty ugly iterator arithmetics must be applied: *(end() - 1). With
their first() and last() accessors the container classes QList and
QVector provide a much nicer method of accessing extrema, so for
consistency this syntactical sugar also should be applied to QMap.
Change-Id: Ibd544acbad8c3ac16f12a1e74362207ea1694375
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Do the same as in mousePressEvent.
Otherwise it is not possible to handle the event
in one of the graphics views parents.
Task-number: QTBUG-8061
Change-Id: I67c7635361a9ed595c513c28ea016e6253fa2101
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Change the debug format from Qt::TextDate to a more detailed ISO style
format including better time spec output.
[ChangeLog][QtCore][QDateTime] The debug datastream is now an ISO-like
format instead of Qt::TextDate
Change-Id: Iddbb8199c3bfbf7bca845482617e7a85da43259d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this patch,
qRegisterMetaType<QSharedPointer<double> >("QSharedPointer<double>")
without a metatype declaration fails to compile, whereas it works
with Qt 5.1 (ie, before commit e9a69c3ba9)
Change-Id: I9408f711c9df810ff29b879b7696dab81c1160f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Clean-up the implementation of toString() and fromString() methods in
QDate, QTime and QDateTime code to be more consistent in ISODate and
TextDate behavior, especially when handling TimeSpec.
Reformat some code so all methods are consistent in appearance and
function to make maintenance easier.
This changes some corner-case behavior in TextDate and ISODate, but
this either fixes bugs or makes the behavior match the documentation.
Change-Id: I457aa1d7cd4f448cd9f8a2e80ec635f3cb98e58c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Switch the implementation of toString() methods in QDate, QTime and
QDateTime to use the QLocale formatter, and remove the now redundant
QDateTime formatter.
Change-Id: Ie4f17c8a6e31acde3ce066f19835bb2b83351ce8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Modify the QLocale date formatter to be consistent with the QDateTime
date formatter and able to replace the QDateTime formatter in a
subsequent change.
Fix the treatment of negative years.
The internal QLocale::timeZone() has been replaced by the
QDateTime::timeZoneAbbreviation() to ensure the correct tz for the
date/time is used rather than always the current system default.
Change-Id: I2ef26700856e2e69b979069226aa504ecbb50071
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
this enables forwarding standard input from the parent process.
Change-Id: I7ee72b9842acc96320d4da693b95dd15d9a7b4d4
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The destructor of the ConverterFunctor calls unregisterConverter. If
the instance is static (as it is in qmetatype.h), then this method
can be called after the QGlobalStatic has already been destroyed.
Change-Id: I33b70734cbe09dfa888e887280c349e43ad1b855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
forwardedChannelsOutput() actually tests forwarding. also having the
older test only eats CPU cycles.
rename the new test to the old name for clarity.
Change-Id: I16a326c8692bb594d7df7897bc53d31b23c66d90
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
close stdin and let the process finish right away instead of first
waiting for a reaction (which is not supposed to come) and then
finishing.
Change-Id: Ifcf200eead5ed95217843e105f9d2dbb5398d646
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
§24.4.1 [iterator.traits] of N3337 makes it *mandatory* to define the
various types
std::iterator_traits<Iterator>::{value,pointer,...}
for any given iterator.
§24.4.1.2 makes it enough to define them within our iterator class.
Change-Id: I1305c8392d224889b09395e30ecc77b194020a15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 5b9006bbdb.
Also revert "Doc: Enable documentation for QScopedPointer's rvalue ref functions"
This reverts commit 5f8416ec65.
Adding a move contructor to QScopedPointer makes no sense, because moving
means 'escaping the scope', which breaks the fundamental point of
QScopedPointer.
Change-Id: I4ac1b108bf199af6e436fa1629aa2d3b93c27724
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To ease interruption of long running tasks, a new method
QThread::setInterruptionRequested() can be called.
The task can check QThread::isInterruptionRequested()
and act upon it by stopping itself.
These methods are designed to replace the use of a global variable
and other hacky ways to stop a task running in another thread.
Change-Id: I17622dd60d2262078210e7e4294ad6c53a6dc179
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Layout items with a Preferred size policy would be treated as fixed
size if they were in the same layout as an Expanding item (or one with
a stretch factor).
This occurred e.g. if a layout was configured similar to this:
1. One item with ExpandFlag/stretch but with a maximumSize set,
e.g. (100x100).
2. Another item with 'just' GrowFlag, and a maximum size bigger than
its size hint.
If the above layout was resized to e.g. (200x50) it would cause the
expanding item to correctly get the size (100x50), but the 'growing'
item would not stretch beyond its size hint.
Instead, it would distribute space around both items, behaving as if
the 'growing' item was fixed'.
The expected behavior is to continue to grow the 'growing' item after
the expanding item has reached its size limit.
Task-number: QTBUG-33104
Change-Id: Ie410653d905f7ca4d702528dafb269f30a0e4f61
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Currently there is no API to extract the meta data
from static plugins. This is needed in e.g QtDeclarative
for loading static module plugins.
This patch moves the 'staticPlugins' function from
QLibraryPrivate into QPluginLoader, and makes it public.
As such, we now also export QStaticPlugin.
Since an application developer cannot do much with raw
metadata, we add a new function
QStaticPlugin::metaData() that returns the QJsonObject
for the plugin. The old metaData function is
renamed 'rawMetaData'.
Change-Id: Idb0bf9ad8ebb13340565512e1998b26e762a357e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a new method to return the time zone abbreviation for the current
time spec. For LocalTime this is the abbreviation returned by mktime.
This new method will later be used in changes to the date formatter
and QTimeZone.
Note this change does not implement WinCE support.
[ChangeLog][QtCore][QDateTime] Add method timeZoneAbbreviation() to
return effective time zone abbreviation.
Change-Id: I265a5e96c72eb7236974f80f053f1fb341e3c816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The implicitConstruction() test case will fail to compile if QCursor is
unavailable.
Change-Id: If26743995505a48da648a2fa2a498debec91c933
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When we auto resize it is handy to be able to limit the maximum
size (just like the minimum size).
[ChangeLog][QtWidgets][QHeaderView]A maximumSize for sections
has been introduced. The maximum section size is by default
the largest possible section size which in Qt 5.2 has been
limited to 1048575 pixels.
Task-number: QTBUG-4346
Change-Id: Ida9cbcc11bd5c4498e319df2e6379c69a7033c04
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QCheckBox cycles through the 3 states, but item delegates didn't
do that.
Change-Id: Iad1e464341033ca357925fe8064f53bb584459f4
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
