The rest of the code is checking programGuard for nullptr, do it here
as well to prevent a segmentation fault.
Change-Id: I38a03f74d493b8f731157be1739707b39904f7ba
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Logical DPI is independent from geometry and physical DPI.
Change-Id: Ice487f61e1bda9e6791e2adf6998ebf61cdbaef2
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
On Windows (only), this test depends on some Q_AUTOTEST_EXPORT symbols.
Change-Id: I3b2ef8dcd56b8860f02fc28f45823b889e794909
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Automated tests often need to load some data from external files.
Currently, a wide variety of approaches for this have been used in Qt
autotests, including:
- embed the source directory into the test binary at compile time, and
find the testdata relative to that; this fails when the source tree
is no longer available (e.g. when the tests are deployed to a device).
- use a path relative to the current working directory, and trust that
the caller always sets the current working directory such that the
testdata can be found; this fails when the caller uses a different
working directory than expected.
- use a path relative to QCoreApplication::applicationDirPath();
this fails when source tree != build tree (since testdata is not
automatically copied into the build tree).
- compile the files into the binary using the Qt resource system; this
should work, but does not allow for testing of code which genuinely
needs external files.
It seems that there is not a simple method for determining the testdata
path which can be reliably used in all circumstances, so various tests
have reinvented the testdata location method in different ways.
Therefore, this is a good candidate for an addition to the testlib API.
The current implementation of QFINDTESTDATA is able to find testdata
in all three of (build tree, install tree, source tree), in that order.
Change-Id: Ib2fed860723ccf437240da3b00db22dfe1a6b56c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Each QFontPrivate points to a QFontEngineData instance, which is
essentially a mapping from different scripts to QFontEngines. Let's
say we have QFont("Waree") and trying to use that for one text in
Thai and another text in English, there should be only one
QFontEngineData: [ QUnicodeTables::Common -> QFontEngineMulti(1),
QUnicodeTables::Thai -> QFontEngineMulti(2) ]. If we cache
QFontEngineData using QFontCache::Key (which includes QFontDef,
script and screen) as the key, then we will create two
QFontEngineData: [ QUnicodeTables::Common -> QFontEngineMulti(1) ]
and [ QUnicodeTables::Thai -> QFontEngineMulti(2) ], so it will be
pointless to have QFontEngineData at all.
This bug was introduced in a 2005 refactoring (512f0e8c in history
repo).
Change-Id: I14677507e97682472cde9a0e1b594e903ec9e718
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The QString autotest shares test data between the remove() and replace()
tests because those functions are very similar. Unfortunately, when an
integer overflow bug was found in remove() the regression test was not
shared with replace(), which prevented the same integer overflow bug
from being discovered in replace().
This commit improves the test by sharing the overflow test data between
both functions, thus demonstrating the remaining bug.
Task-number: QTBUG-22967
Change-Id: I2778249800f74799d890eefa9227ca8ddd8fbaa3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rename the qUncompress test to make clear that the test only deals with
uncompressing corrupted data and add a message making it clear that this
test will produce some warning messages.
Don't skip creating the test data, as that prevents the test output
reporting exactly what is skipped.
The expected output is the same for every row (an empty QByteArray), so
don't bother storing that in the data table.
Change-Id: I59f1cc91a941bcaadacb2a613dd5eca2564961c1
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWinEventNotifier is an essential class if you're using native Windows
Overlapped IO and need to convert it to Qt signals. However the header
is marked private.
Task-number: QTBUG-68
Change-Id: I22e9a84da97f969ddb82e9ba15e604a01abd80d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
These were marked as TODO items for Qt 5. Do them now. (The TODO item
was added when plural support was added back in the early Qt 4 days.)
Change-Id: I3be50bc657582db730401103d691234695784340
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QHostAddress(QHostAddress::Any) was not equal to QHostAddress::Any
because only one of the operator== overloads was handling this.
Task-number: QTBUG-22898
Change-Id: Ifd36947a50e8c36362b4e850fd8d5105ee0925ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The physicalDotsPerInch() is the average of the horizontal and vertical
physical dots per inch, and likewise logicalDotsPerInch() is the average
of the horizontal and vertical logical dots per inch.
Change-Id: I18aa610dc9a63efe062f78c823ba29f90b2712f4
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
For compilations without variadic template support
Change-Id: I78af4f6022ad7a0923e5c5788a34eb7d834f50f3
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It is already documented in the QObject API documentation, but
Also update the overview
Change-Id: I92f44a50222738530928e3f4e6e463b3210d3a29
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Add Core Text fontdatabase for Mac and use it as default. It also
reenabled Core Text font engine for native font rendering on Mac,
though it's not used in declarative UI (by default declarative
will still use scenegraph, which will only use this font engine
for retrieving font metrics and outlines).
With the new fontdatabase it's now possible to load all the fonts
installed in the system as well as adding application fonts.
Change-Id: I0d2aa1420019adf6d0f70dd147a9d71b2684d3f1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
If an ongoing query is not finalized before close function is
called, sqlite driver still tries to close the connection to
sqlite. In this case, sqlite reports an error to sqlite driver
which is not reported to the client. The failure in close causes
connection to sqlite unclosed and memory is not freed. This
fix tries to finalize all queries before close function is called.
The close function should succeed.
Task-number: QTBUG-16967
Change-Id: I2f10a2a9017446a9d44b693b00464a89625e3602
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
If cocoa headers are being included first, this messes up
the defines MAC_OS_X_VERSION_MAX_ALLOWED and MAC_OS_X_VERSION_MIN_REQUIRED
when compiling with clang.
Change-Id: I07177d07a0ac7c5f7e72b04f42d6343e689e0d33
Reviewed-by: Ali Akhtarzada <ali.akhtarzada@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Change interface_cast to return void* to avoid using virtual
inheritance.
Get rid of the magic Q_ACCESSIBLE_OBJECT macro.
Change-Id: I94b824aef53f2ba657d39d406b387c8681d47ee4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Remove references to the old bug tracker. The data from the old bug
tracker is no longer accessible, so these markers are meaningless.
Change-Id: Ib9d029d52b70fd0a512b9532d65f03763eabfe57
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added emition of a slot connected using the new syntax, as well as a
functor
- Replaced the old connect_disconnect_benchmark by a new one. The old
one was of little interest as it tried to connect to every signal,
producing a lot of similar results.
The new test tests different ways of connecting and disconnecting
Change-Id: I3c04c24027252308f8942bcd9562110104cdb4e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
For queued connections, the args[0] is set to null as it make no sens to
forward the return value to the signal.
So we need to check in the operator, that the pointer is not null.
(container.data is args[0])
Change-Id: I80bde66f1ec19de0f4962c80e5b2797d2819075c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QMetaType should unlock all mutexes guarding custom types data before
calling an user code.
Task-number: QTBUG-22930
Change-Id: I501d011d6cbd467d8f22402d668e84aa848061b8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This commit also improves the related documentation a bit.
The test is copied from the test with the old syntax, but all the
connection statement are changed to use the new syntax
Change-Id: Ia5630ca4335b9f8ca6d724ae3c8750d6f0804d8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Move from each implementation of QObject::connect to
QObjectPrivate::addConnection the code that adds the
QObjectPrivate::Connection* to the sender's list.
Change-Id: I665af016d5e6673eb0e9c06965e5deed50454b28
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Before, the constructor was called for complex objects, but
POD were left unitinialized. Now, they are zero-initialized.
Also add test for return values
Change-Id: Iff9bf6687589d7b7395a71fb6f650ab8aa2b6bd1
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This add an overload to disconnect which is symetrical to the new
syntax of connect.
It is possible to diconnect connection like this:
QObject::connect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
QObject::disconnect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
This overload only work with pointer to member function, and not static
functions or functors.
The test is copied from tst_QObject::disconnect(), just
changed the syntax of the connection and disconnection
Change-Id: Ia8f819100cb12098e32877522b97b732b1e676a8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This includes a BSD licenced file Qt5CoreMacros.cmake which is
adapted from Qt4Macros.cmake in the CMake source tree.
Change-Id: I54326b808795535490a0489659b351a8da72cdbb
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When renaming classes, or when moving classes from one module to
another, it's useful to have a simple way of supporting the old
API/location for some time. To this end, syncqt shall now recognize
a "deprecatedheaders" section in sync.profile. It looks like this:
%deprecatedheaders = (
"QtDeclarative" => {
"qquickcanvas.h" => "QtQuick2/qquickcanvas.h",
"qquickitem.h" => "QtQuick2/qquickitem.h",
"QQuickCanvas" => "QtQuick2/QQuickCanvas",
"QQuickItem" => "QtQuick2/QQuickItem",
}
);
In the above example, syncqt would generate a header called
qquickcanvas.h for the QtDeclarative module; when included, this
header will issue a warning and include <QtQuick2/qquickcanvas.h>.
And so on, for the other entries.
Deprecated headers are installed along with the module's normal
headers.
Change-Id: Ie2518b42275c2b2ff44216f07d376ccf5be6dc45
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Prevent Xlib errors of the form
"Xlib: sequence lost (0x2716a > 0x1717c) in reply type 0x11!" from
being printed. We know the cause of these is because we're manually
calling the XESetWireToEvent handlers since those are not handled by
XCB, and this confuses Xlib since it's then seeing events with old
sequence numbers. We simply set the sequence number to the latest
sequence number and the errors go away.
Change-Id: I2a9e7a7cfd0ba8692e43ce61f796a8189305e0d3
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
QPlatformPrinterSupport seems to not exist anymore.
Change-Id: I142ce99877620e0b678fd6693bc72257ca230e4f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It can be useful to get a signal when the QScreen changes, for example
when having bindings to QScreen properties in QML.
Change-Id: I919dd12c656485b28b393aec5eedac4c01593afc
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Centralise the specification of the default ssloptions to make the code
clearer and more testable.
Change-Id: I4f4bae72736dd063ee4cd64c6375e82d0600a105
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QVariant::Type is redundant, it copies QMetaType::Type enum. In long
term it might be removed completely, but it wouldn't be a source
compatible change.
Change-Id: Ibe79ca0ab43918b4cf767cd7a5040f865abbf03f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Partial revert of 94fc875079. All dependent
modules need to be specified in the QT variable, except core and gui, which
are there by default.
Change-Id: Ie8ffed56de03a37da191772fa321ed162e44a50d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
MSVC cannot decide on an overload for pow().
Change-Id: Ied3fbc0de403774d9f85738852cf671ce42cd1c1
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Warnings about conversion from size_t to int
- Unused variable.
Change-Id: I4a79fa6dc4b95551a64d282ae4307b0edff41201
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CAN_USE_VFP_INSTRUCTIONS implies arm7.
This is the only arm configuration we currently support.
These defines also ensure that a suitable snapshot is generated
when cross-compiling (i.e., when using the arm simulator).
Change-Id: I3a8a4224b9127a549b3987bcf5651ed1ffb8079a
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The overloads taking a range were previously used for cloned signals
(ones that had default arguments). Commit
919b723088b8617b202b92d80b8d0983e4fd9500 changed how cloned signals are
handled, making the from,to overloads obsolete.
The 3 argument activate() overload that does not take a QMetaObject
argument was marked obsolete by the same commit, but considering that it
is used by our autotests, I've decided to keep it and not mark it as
obsolete anymore.
Change-Id: I631ce84dce156dec68cf26e10787cb35e3f50e18
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Don't name test functions using task identifiers from obsolete bug
trackers.
Change-Id: Iba6ae8ad3b39e365c5510ed5c86749a167572829
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>