After calling close(), the socket can enter 'Closing' state, in which
we try to write buffered data before disconnecting. As the device is
already closed, we must disable any pipe reader activity and clear the
read buffer.
Change-Id: I8994df32bf324325d54dd36cbe1a1ee3f08022d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
To allow reading from a slot connected to the aboutToClose() signal,
we should call QIODevice::close() just before closing the inner device.
This patch amends 21f3ff65b8.
Pick-to: 6.2
Change-Id: Ic8cd00497e1bdf923b980c26e9ca874b77e82f89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The docs (10 lines above) say it will find the backend case
insensitively. Thus the comparison should also be case-insensitive.
Pick-to: 6.2
Change-Id: I65901ed81b7d8bdfcf76f5b6c7b40efe63245503
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To match the Unix behavior, we should emit errorOccurred() signal and
close the channel if the write operation fails.
Change-Id: Iac3acb18dbbfe6e7e8afb2555d9adaff1fe98d0f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In a blocking application, receiving the results of write operations
must be synchronized with the waitFor...() functions. But, clearing
the buffer in another thread can cause the code
localsocket.write(...);
QVERIFY(localsocket.bytesToWrite() > 0);
to fail unexpectedly, if the socket has been disconnected between
the calls.
So, defer resetting the buffer until checkForWrite() is called.
Change-Id: I8c21036aab6a4c56d02c0d9a18d4bbce52d724f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The test used to hang on waitForRead(), sometimes, which underneath
involve a poll()+read() syscall pair.
When this happened, the IMAP data came together with the proxy data on a
previous poll()+read() call and the proxy code had already consumed it.
We now wait for data only if data is not already available.
Fixes: QTBUG-96345
Pick-to: 6.2
Change-Id: I084f5d1268a5091ea614fcec91c8d356dcb90d9f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The unversioned libcrypto.dylib that's shipped with macOS 10.15 will
result in a crash if loaded, with a message saying that the unversioned
library should not be loaded, as it doesn't provide a stable ABI.
Task-number: QTBUG-95249
Pick-to: 6.2 5.15
Change-Id: I49325e5d675155e90840cc93623549f725bc77b4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The h2 server is running in a separate thread, so while the previous
test was finished and the server was deleted, it could still emit
and have a queued emission in-flight which would be picked up by
the next running test.
Pick-to: 6.2 6.1 5.15
Change-Id: I26b1bc711df7473032d6078f35f8aca37c40137e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There were several issues with the socket state checking when the pipe
reader is not running:
- the number of object handles in the WaitForMultipleObjectsEx()
call might have been zero;
- a call to the waitForDisconnected(-1) might have hung;
- we did not perform a loop iteration for the waitFor...(0) calls,
so disconnect detection was unreliable.
These issues are related to the same code, so they don't seem to be
addressable separately.
Change-Id: I3bca872bb4191e6a7d38a693d81f7981af7fe145
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
There's not much context to the URLs being printed, so remove the
message. And suppress the message coming from the MiniHttpServer
Change-Id: Ie2025ac717657ed0f2f0163bd0af22e12a49b30f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The insertions are sorted by when they expire. So, we test the various
orders to insert entries.
Fixes: QTBUG-95959
Change-Id: I1e8d7f4c77dce5eae3d4bfa5101f296c3eea1961
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Helped quite a lot with OpenSSL 3 not accepting some old algorithms.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-95123
Change-Id: If4894fa86eba7b002465fa661d436ae6ea751989
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To retain backwards compatibility with some QNetworkReply usage,
namely connecting solely to finished-signal and allocating a buffer to
read into, but without storing the entire decompressed file in memory
until read, we may decompress the file twice.
With this patch users can now avoid this double decompression if the
amount of buffered data stays below 10 MiB. This means any file smaller
than 10 MiB will never need to be decompressed twice to know the size of
it. On top of that, if the data is handled as it arrives (e.g. in
readyRead) and the buffer is kept below 10 MiB it won't need to
decompress twice either.
This is active as long as "countDecompressed" is true, though it
currently always is in QNetworkAccessManger, with a future goal to make
it possible to control with public API. Since it requires the user to
potentially adapt their usage of QNetworkReply.
In this patch we also stop tracking the amount of unhandled uncompressed
bytes (uncompressedBytes) in favor of tracking the total amount of bytes
which has been read() by the user of QDecompressHelper (totalBytesRead),
since we can more intuitively work out the total amount of unread bytes
using this value.
Change-Id: Ie3d8d6e39a18343fcf9b610f45c7fe7e4cd4e474
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- avoid calls to private and virtual functions, if the device is not
open;
- avoid repetitive checks in loops;
- add missing checks in readLine() overloads;
- remove check against unsuccessful resize().
Change-Id: I973d5931163b25db1c09c7c3b66f29ea90bb1b29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This signal is emitted by the QIODevice itself, so we don't have to
forward it from the internal socket.
Pick-to: 6.1 6.2
Change-Id: I85745f36d7a27d92f339a9184de3b6e5d46f6f34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This introduces a new attribute that allows behavior to keep
the TCP connection(s) to a HTTP1/HTTP2 host longer or shorter
than the default of 120 seconds.
Note that the server might still close the connection earlier.
Fixes: QTBUG-20726
Fixes: QTBUG-91440
Change-Id: I7da64230a78c642c12c0ddbe6b678cf17c3aafde
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This mechanism was neither properly designed nor correctly tested
initially on Windows.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now implements delayed closing, which is consistent with
the behavior on Unix.
Change-Id: Ic3bc427e68eea7f18201f6129df19fbc87d68101
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It's the user's privilege to do so when they want to finish reading the
QIODevice. Moreover, this is the only difference between close() and
disconnectFromServer().
[ChangeLog][QtNetwork][Important Behavior Changes] The Windows
implementation of QLocalSocket::disconnectFromServer() no longer calls
close(), which is consistent with the behavior on Unix.
Change-Id: Ie9ce20c60259a2b08f5254b719355bd7be9b17cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In the case where we have pending data to write, calling flush() here
may cause the device to close immediately, if the pipe writer already
got a result of the last operation from the thread pool. In this
scenario, the device does not enter the 'Closing' state, which leads
the following code to unexpectedly fail on Windows
socket.write(...);
socket.disconnectFromServer();
QVERIFY(socket.waitForDisconnected());
Removing the call to flush() makes the behavior consistent with the
implementation on Unix.
Change-Id: Ic31fbc999be979c1e5befa8f132d9fb367f472ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
According to the documentation, calling abort() should immediately
reset the socket to its initial state. This includes:
- closing the file descriptor;
- closing the QLocalSocket as an I/O device;
- canceling a pending outgoing connection, if it exist;
- reseting 'serverName' string.
So, adding a call to close() resets the state entirely.
Pick-to: 6.1 6.2
Change-Id: I9c604b5187c6300b437d7aa4c2d06db03edacf21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
These signals allow monitoring where in the HTTP1/HTTP2
flow a request is currently in.
Fixes: QTBUG-71698
Fixes: QTBUG-18766
Change-Id: Icc2fe435afc9f680fa7a76c32731e25fcdfeb4b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The server's socket may not have been created yet, so use the server's signal
instead.
Switch to QCOMPARE to get better output.
Delete the extra checking for schannel, we don't support Windows 8 anymore.
Pick-to: 6.2
Change-Id: Icd310c32939cb577c9f3438789f667aa0a3a4d85
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the file already existed we simply removed the old one without
adjusting the size. So use the removeFile() function which takes care of
that.
Additionally, if the current size was non-null we previously increased
the size (presumably meant to be temporarily but wasn't) and called
expire() which would either:
1. not do anything and return currentCacheSize, if it was not greater
than the max size. This would mean that the size of the file would be
counted twice.
or,
2. discard currentCacheSize, measure the size of the items, and then
remove some items if the total size surpassed the max cache size
Neither of those branches need us to (temporarily) increase
currentCacheSize. It also doesn't attain the (presumed) goal of trying
to keep below the max cache size after having added the new item.
Fixes: QTBUG-95009
Pick-to: 6.2 6.1 5.15
Change-Id: I2b5b13ff473a7aa8169cf2aecfea783c97f2d09a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Qt has a hardcoded backlog value of 50,
this allows for applications to tune this
value. Modern kernels have the SYN cookie
feature that reduces pressure from an
flood attack, the backlog setting however
is then a queue for most likely real
completed (SYN/ACK) connections hence, it's
easy to get clients connections dropped
with this very small limit.
[ChangeLog][QtNetwork][QTcpServer] Added
QTcpServer::setListenBacklog() to be able
to have control over the listen backlog feature.
Change-Id: I1c78af6d99e012591e214b7e09fa85c485880d48
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Both readChannelFinished() and disconnected() signals should be emitted
after closing the pipe. Otherwise, these signals do not correspond to
the state of the socket and may even be resent, if a slot connected to
one of these signals processes events.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now emits both readChannelFinished() and disconnected() signals
after closing the pipe and emitting stateChanged(UnconnectedState),
which is consistent with the behavior on Unix.
Pick-to: 6.2
Change-Id: I1cc551b7897fdba3cec1fd6705f5396790818c7d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The ${QT_SOURCE_TREE}/src/network include paths of several tests are
apparently not needed anymore. Remove those.
tst_qfilesystementry and tst_qfreelist are the only tests that actually
need to reference files in qtbase's source tree. Simply use the paths
relative to the project file.
Task-number: QTBUG-88090
Change-Id: Ic6f341e001338c1b07dce6e58316245bc9560c5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The base implementation discards the data by reading into a dummy
buffer, which is slower than necessary.
Change-Id: Iabf0c4a25746af6cac5b61d7bda66d89501c808c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QIODevice::readLine() can also return partial lines, which was not
properly documented. Add an autotest for QLocalSocket to illustrate
and test this behavior.
Pick-to: 6.2
Change-Id: Ia2c1c438cc68d2672d34881e11fdf7837232f3b4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
With MSVC it tries to link with the function in the scope qt::tst_QDtls::*
where it is not found
Pick-to: 6.2
Change-Id: If83a9f69c7b3834248569f6bdf203f5442693080
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To (set)decompressedSafetyCheckThreshold, as suggested on the API review.
Task-number: QTBUG-94407
Change-Id: Iffc52691022939ae46703de8a0416355487b716f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fixes compiler warnings:
warning: implicit capture of ‘this’ via ‘[=]’ is deprecated in C++20 [-Wdeprecated]
Change-Id: Ia7cf50f491e92f39162c69afb2a8320afedba056
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
For flush() it's not clear what they wanted to test.
isEncrypted() is tested indirectly in many of the other tests.
Change-Id: Id6dfecbb25b7bba8f1a99518fd9c9e06280aaa9f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It needs to be checked at runtime to know if the current backend
supports it
Pick-to: 6.2
Change-Id: I0998309149b109e2075a008b2b8d8115fa3688cc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With MSVC the current way we mark it (potentially) unused ends up with a
warning:
warning C4551: function call missing argument list
We require c++17 core language support so let's use [[maybe_unused]]
instead.
Pick-to: 6.2
Change-Id: I125986b729cb7cd540901702a47365f0491e7887
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As per the best practice laid forth in RFC-8996.
TLS 1.2 was recommended from 2008 until TLS 1.3 was released in 2018.
[ChangeLog][QtNetwork][QSslSocket] TLS 1.0, 1.1 and DTLS 1.0 are now
deprecated, as recommended by RFC-8996.
Fixes: QTBUG-92880
Change-Id: I90cebcfb07cfce623af7ac9f2b66ce9d02586b54
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since we're no longer connected, much less encrypted.
Was done in schannel backend, but not in ST or OpenSSL
Pick-to: 6.2
Change-Id: Ia49387be0088f899a0c89091f7e468dba1c0eee6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With the recent change, 'system' headers gone: not in the test code anymore,
so, for example OPENSSL_VERSION_NUMBER is undefined, making the test
to select a wrong code-path - 'h2c', instead of encrypted h2.
Pick-to: 6.2
Pick-to: 6.1
Change-Id: I3b201e21fac56875c9045c7463e2ae69af4c6470
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Previously, it went direct to QTestResults::addFailure() without going
via the checking for expected failure. Add QTestResults::fail() to
take care of this checking, as for verify() and compare().
Tidied up the code implementing expected failure and QFAIL(), while I
was about it. Adjusted an existing test to verify that expecting a
QFAIL() works, by using QFAIL() instead of QVERIFY(false).
Remove the QVERIFY(false) whose comment brought this to my attention.
[ChangeLog][QtTestLib][QFAIL] QEXPECT_FAIL() now correctly anticipates
a subsequent QFAIL(). Previously QFAIL() counted as a fail regardless.
Change-Id: Icc28cf70e5ff3006363791ea03aa01f2f591eb71
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Rather than when the data is received. Source compatibility is
achieved through double-decompressing the data. This lets us know
how many bytes are available just as before but without having the
uncompressed data left in memory.
Fixes: QTBUG-83269
Change-Id: I352bd09581614c582e4628243e2a0e895ba4946b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
