Move the repeated List suffix to the __enumTable() helper, where half
the parameter's uses were having to snip it off anyway.
Change-Id: Ia396e87e59ceeb81fc4b0890a86934dc67da10cb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Compare the code->name mappings we're using to the ones CLDR's
common/main/en.xml provides; report discrepancies. Tolerate tags
missing from en.xml if they're known to the locale-inheritance
machinery.
Change-Id: Ibe96c18bf55984a35de3b3644f3586a9f30720b2
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
When checking the value of CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG>,
then <CONFIG> must be the upper case configuration name.
Also, we must not unset __qt_ltcg_detected, because the feature
condition evaluation happens way after the feature definition, and
__qt_ltcg_detected was not available anymore there.
This commit amends 96bdcdacbc.
Fixes: QTBUG-87874
Change-Id: I2b555bd1d7fbc8973e1d9493045c27d61b0d2c1b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I47504d6c032c9a6ace7440580f0081cc5f254038
Reviewed-by: Maximilian Goldstein <max.goldstein@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The CONFIG_MODULE_NAME option to qt_internal_add_module is used to
specify what the name of a Qt module's pri file should, as well as
some of the key names assigned in that file, as well as what should be
passed to QT += in qmake projects.
When it is not specified, the computed value is the lower case of the
CMake target name. E.g. for qt_internal_add_module(Core), the computed
CONFIG_MODULE_NAME is 'core'.
The qmake variable that determines the above value is the MODULE
variable.
If it is not explicitly assigned, it's computed from the .pro file
name, rather than from the TARGET variable value.
Thus there is an inconsistency in how the value is auto-computed in
CMake compared to qmake.
We had a few special cases in projects that assign a correct
CONFIG_MODULE_NAME when the auto-computed value was wrong.
Teach pro2cmake to detect these inconsistencies and pass a correct
CONFIG_MODULE_NAME value based on the .pro file name. This way
we get rid of the special cases as well.
Aka if there is no explicit MODULE assignment in the .pro file, and the
auto-computed value by CMake is different from the one computed by
qmake, explicitly write out a CONFIG_MODULE_NAME value with what qmake
would have computed.
Task-number: QTBUG-88025
Change-Id: I166b29767e87cd6b0c681fa53238098355a177f9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In preparation for some further regeneration.
Also modify pro2cmake to add forgotten mapping for the
Qt::EglFsKmsGbmSupportPrivate module.
Change-Id: I92425c566c2b275b40eec8c652496290754ac385
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Requires subsequent re-numbering of the enum tables to eliminate gaps,
before locale data can be regenerated. However, it will work with the
present locale data, since it merely loses the means to use some names
for which the available data was just the name and code. This implies
a transient issue of recognising some codes for which there is no
actual enum member; but relevant code will work as before, finding
nothing but the code and its name. This shall be resolved by a coming
BiC change to resort the language, country and script codes, changing
the numbering (almost) completely.
[ChangeLog][QtCore][QLocale] Various obsolete language and country
codes have been removed. Some lacked locale data, others were obsolete
aliases. All have been deprecated in 5.15.
Task-number: QTBUG-84669
Change-Id: I45fc76a5f2f6c3b0ea3c1bb61e917da984183783
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Now that qt_add_executable doesn't set the WIN32_EXECUTABLE and
MACOSX_BUNDLE properties anymore, pro2cmake needs to look at the qmake
example projects and generate appropriate set_target_properties calls.
The relevant CONFIG entries to look at are windows, console,
app_bundle and cmdline.
CONFIG += windows implies 'subsystem windows' on Windows, which maps
to WIN32_EXECUTABLE == TRUE.
CONFIG += console implies 'subsystem console' on Windows, which maps
to WIN32_EXECUTABLE == FALSE. Aka the opposite of CONFIG += windows.
Whichever is the last one set, cancels out the other one.
CONFIG += app_bundle implies a macOS bundle executable, which maps
to MACOSX_BUNDLE == TRUE.
CONFIG += cmdline is the same as CONFIG += console and CONFIG -=
app_bundle, aka WIN32_EXECUTABLE and MACOSX_BUNDLE set to false.
In qmake, if no CONFIG is specified in an example project,
the default is CONFIG += windows app_bundle, aka WIN32_EXECUTABLE
and MACOSX_BUNDLE set to true.
The script uses a heuristic to try and not write the properties for
every single subscope, except for values different from the default.
This is not strictly correct, but it covers most use cases, and keeps
the generated projects a bit cleaner.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: If05606ec3205e0fe7c1803c07e114d9fd9c3e4f7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Routine update by running scripts, ignoring clang-format's extensive
grumbles. Added notes to util/locale_database/'s README, on the need
for that, and enumdata.py, on when to add entries. As usual, several
new locales are also added, for existing languages, territories and
scripts.
[ChangeLog][QtCore][QLocale] Updated to new version of CLDR (the
Unicode Consortium's Common Locale Data Repository) v37.
Fixes: QTBUG-84669
Pick-to: 5.15
Change-Id: Ib76848bf4bd1219180faf46820077e8d8049a4e3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The singleton modifier must be written without square brackets.
Task-number: QTBUG-87684
Change-Id: I924bbf97789edd7f2b4f2b9bbca2cb99841d2906
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also adjust pro2cmake to use the new qt_add_executable name
instead of add_qt_gui_executable.
No compatibility functions provided this time, so we'll need to follow
through all repos and regenerate all examples.
Two reasons for not providing compaitibility functions:
1) We don't intend add_qt_gui_executable to be public API
2) A previous case with qtquickcontrols2 and qttools pointed out that
making top-level builds work with cross-compatibility API is not
simple. So just go ahead and regenerate everything.
Task-number: QTBUG-87661
Change-Id: I2f228827b786ae03bf7e1bf3908ea02a8794ed52
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The code pervasively presumes their values can be held in a ushort, so
make sure the compiler knows we expect that to work (and doesn't
complain about narrowing when we do convert them to ushort).
Change-Id: Idde7be6cceee8a6dae333c5b1d5a0120fec32e4a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The script told me the wrong path to pass as first argument, so
correct that; and the README didn't mention the need to run it.
CLDR v37 makes no change to the actual generated data, though.
Tweaked wording of a comment in the script.
Task-number: QTBUG-84669
Change-Id: I56b510c666f414d9719cef650aeec6192c4fde6e
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In order to funnel this through CMakeLists.txt we add an
OPTIONAL_IMPORTS entry in addition to the existing IMPORTS.
Task-number: QTBUG-87130
Change-Id: I57e882e75d17f5bc68d99ce7837425981fe6938b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is necessary for pro2cmake.py to work on qmlcompiler.pro.
Change-Id: I356a6333d3bcc15daf6f2692a2b7ca82c9f37c85
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This option maps to FEATURE_reduce_exports. The feature is on by
default, except for MSVC. The reduce_exports configure test is not used
in the CMake build.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN target
properties are now explicitly initialized in the
qt_set_common_target_properties function, because we don't have access
to the feature in QtSetup.cmake where the CMAKE_<LANG>_VISIBILITY_PRESET
variables were set before.
Task-number: QTBUG-85373
Change-Id: I378453f0e0665731970016170302871e20ceb4e2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Offer compatibility wrapper functions until we update all of the Qt
repos to use the new names.
Task-number: QTBUG-86815
Change-Id: I5826a4116f52a8509db32601ef7c200f9bd331de
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
xcb-image includes xcb_aux.h, which is part of xcb-util.
Fixes: QTBUG-86287
Pick-to: 5.15
Change-Id: I253308008c5baeb1d061ef19f516ae6ab6dff52c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This configure switch sets the CMake variable
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> per release config to ON.
The feature 'ltcg' is enabled if any of the variables
CMAKE_INTERPROCEDURAL_OPTIMIZATION,
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> are ON.
In order to implement the check, configurejson2cmake had to be extended
to be able to write extra CMake code before and after the feature
definition. This extra code can be added to a feature mapping below the
keys "cmakePrelude" and "cmakeEpilogue".
Task-number: QTBUG-85373
Change-Id: Ia2eb907edcf087f137977a9b090705397f83eb05
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
If '-make examples -no-compile-examples' was specified, sources of Qt's
examples would be installed, but the examples would not be built.
This switch has always been a source for confusion and is only
interesting for distributors, who can just package the examples
directory tree.
Change-Id: I0291d70e4951d98b553a4abf217db49d05316d3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Such expressions were translated to "foo NOT = 0" which is invalid code.
Change-Id: I8b485bfe1d1f553c08df3b5d59b0f39f2dcbd5c0
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Calibrated to match F16C and ARM-FP16 hardware conversions.
Change-Id: I3bdd4d3db3046fee4aeb24e4ce8b9bc9a06e0397
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qmake parser of pro2cmake handles completely commented lines to make
assignments like this work:
SUBDIRS = \
foo \
# bar \
bar
However, assignments like
SUBDIRS = \
foo \
#bar \
bar
were cut off at the commented line.
Fix this by allowing leading whitespace for "fully commented lines".
Change-Id: Ib5de850a02fd9b9ebb7c056c2f64f9d684334b08
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Unicode table code can only be safely called on valid code-points.
So code that calls it must only pass it valid Unicode data. The string
iterator's Unchecked Unchecked methods only provide this guarantee
when the string being iterated is guaranteed to be valid UTF-16; while
client code should only use QString, QStringView and friends on valid
UTF-16 data, we have no way to be sure they have respected that.
So take the few extra cycles to actually check validity in the course
of iterating strings, when the resulting code-points are to be passed
to the Unicode table look-ups. Add tests that case mapping doesn't
access Unicode tables out of range (it'll trigger the new assertion).
Added some comments to qchar.h that helped me understand surrogates.
Change-Id: Iec2c3106bf1a875bdaa1d622f6cf94d7007e281e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The debug feature for the CMake build is solely determined by the value of
CMAKE_BUILD_TYPE or CMAKE_CONFIGURATION_TYPES. There is no point in
restricting the autoDetect expression to developer builds or MSVC and
macOS builds.
User-visible result: -DCMAKE_BUILD_TYPE=Debug now actually turns the
'debug' feature on, also for non-developer builds on Linux.
Change-Id: I65c92575c9483bff16beb78b60606c55aeadcece
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This configure switch controls the feature 'optimize_size'.
This isn't merely a mapping to CMAKE_BUILD_TYPE=MinSizeRel, because
we potentially want to combine -optimize-size with -force-debug-info,
which maps to CMAKE_BUILD_CONFIG=RelWithDebInfo.
Task-number: QTBUG-85373
Change-Id: I1a9343ebc54816f52e90e9d33ea3df4c99b1ec9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make clear why we don't need to assert against out-of-bounda accesses
in the generated code, provided the code point is within its bound,
(Using one table's early entries as indices into later in the same
table at which to look up indices into another table made it a little
hard to work out what was going on, especially as nothing told me
about the early / late distinction. Record what I discovered, to save
the next person to stumble into this some confusion.)
Change-Id: I8e5771a7f3d70c1911aeae1b0cabe5c47bc7e9c7
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The configure argument -qreal <type> maps to the CMake argument
-DQT_COORD_TYPE=<type>.
Fixes: QTBUG-83325
Change-Id: I94970f31ccfb241b1dd4f1d9b6cef25d6684dc05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We extend configurejson2cmake to read the "commandline"
information from configure.json. This data is then translated to CMake function
calls and written it into commandline.cmake files.
We extend QtProcessConfigureArgs.cmake to pick up those commandline.cmake
files to feed our command line handling code, which is a
re-implementation of the command line handling in qt_configure.prf.
The command line handler sets INPUT_xxx variables, similar to
configure/qmake's config.input.xxx variables. The INPUT_xxx values are
translated
- to -DFEATURE_xxx=ON/OFF arguments if the input represents a feature,
- to corresponding CMake variables if such a variable is known,
- or to -DINPUT_xxx=yyy CMake arguments.
Configure arguments that have an entry in
cmake/configure-cmake-mapping.md are actually implemented. Other
arguments are likely to need more work.
Task-number: QTBUG-85373
Change-Id: Ia96baa673fc1fb88e73ba05a1afb473aa074b37d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It's new in Qt 6 after the type registration changes.
Task-number: QTBUG-82922
Change-Id: Id4aa22e50a8d84736688dbf2ab51e12a116177f0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
They were only used by one function each, in unicodetables.cpp, so
don't need to be macros.
Change-Id: I3e7f9f661568862d0a0d265bb8f657a8e0782b13
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Embed package versions into the qt_find_package calls for various
Linux specific packages.
Task-number: QTBUG-82917
Change-Id: I5d1cb623f81932dfae4658b8a3a89eedb71ea3af
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If certain 3rd party libraries have a version that's not suitable for
Qt, the configure summary should say so, rather than use them and fail
at build time.
With the current situation, we have to duplicate the version
information from the configure.json files in helper.py, by assigning
the version number as an extra find_package variable.
Rerunning configurejson2cmake then embeds this version info into the
qt_find_package calls in configure.cmake.
Some of the Find modules are rewritten to take the specified version
into account when looking for the libraries.
This involves moving around the code for creating a target, after
calling find_package_handle_standard_args() so we know if a good
enough version was found.
Task-number: QTBUG-82917
Change-Id: I139748d8090e0630cda413362760034dc3483e11
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Eliminate some needless parentheses, tidy up some spacing and
indentation and split some long lines. Change first += after
declaration to initializer.
Change-Id: I05ff2a6337b7ed14e0a2dc9c03fc784c92b63515
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt6 makes sizes qsizetype; and one of these was already sizeof()-sized.
While qsizetype might not be ssize_t, it's at least no bigger, so we
can safely use its format specifier, with a suitable cast.
Change-Id: I433f654f6b139d74b4d5358b804b44ab1f0ada15
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Removed three warnings, rather than fixing them, as Konstantin Ritt
tells me they've been redundant since Unicode 6 or so.
Change-Id: I4507e852bceb08a0252c77a8b383aceac212aad9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Don't include a QString::number() in a sum of QByteArray and C strings.
Change-Id: I7544e835fcf5625b1fe1ee2055a48600200daafd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This adds the option to build Qt with libb2, which is especially
recommended, if you care about the performance of the BLAKE2 hashing
algorithms. The bundled version is the pure reference C implementation
of BLAKE2, while libb2 has many additional hardware optimizations.
However, the API of both is the same, so no changes to the code were
necessary here.
Change-Id: I3563982f4e07be300291fe103c38b16a404b3ebb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Changes pro2cmake to handle load(qt_app) projects and write out
qt_internal_add_app calls.
Also adds handling of macOS and Windows specific resource files for Qt
apps only.
Task-number: QTBUG-85757
Change-Id: I994d8d19ab2ae366a985cab7894b97d6a278a56f
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The openglextensions module is dicontinued and removed in Qt 6.
Change-Id: I0b98f9b6575026828c188786aeb5c1a62de1f8a3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This only arises when the system locale tells us to use its zero as
our zero digit, since no CLDR locale uses it by default. Adapt an
MS-specific QLocale::system() test to use Suzhou numbering, so as to
test this.
While updating the locale-restoration code to also restore the digits
being set in that test, add restore code for the long time format,
where previously only the short time format was restored. Add a
comment to make it less likely one of those shall be missed in future.
Fixes: QTBUG-85409
Change-Id: I343324bb563ee0e455dfe77d4825bf8c3082ca30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One can now write
with special_cased_file("base/dir", "foo.txt") as fh:
do_something(fh)
This makes the code of processJson a bit clearer, and it allows us to
easily add more files that support the special handling comments.
Change-Id: Ia25d0c0d48df1802c5e2123d05345a88b42a2981
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The SpecialCaseHandler supported only two file names: "CMakeLists.txt"
and "configure.cmake". Generalize the code to allow for arbitrary file
names. We will use this in a subsequent commit.
Change-Id: I0adada91409a11a369fd1cf2d6ab21cc8f28ba0f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Certain resources and compiled jar files have to be copied into the
non-prefix build dir location. They were previously only installed,
which doesn't do anything in a non-prefix build.
Change pro2cmake to generate code that places the compiled java
jars into QT_BUILD_DIR, so that non-prefix builds work.
Place the module dependencies xml files into lib folder in non-prefix
builds.
Don't special case the output and install location of the Android QPA
plugin.
Task-number: QTBUG-85399
Change-Id: I4ac9d3929ea8ecc95ec99a77e621ad2121b68832
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qtdeclarative as of 41864db3b61d9e81a9fe4906918d2cd3d6d32a0c always
retains the resources, so there's no manual facility for retaining
left. Remove the code.
Change-Id: If79b66683897b5f430844e13c0230e41a2cf061d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If a file was part of a resource that has a non-empty base directory,
the script generated set_source_files_properties calls to the file
path without including the base dir, which means the command did
nothing.
The script should set the QT_SKIP_QUICKCOMPILER on the full file path
if a base dir is present, similar to how the alias handled.
Refactor the alias property writing code to write all properties
into the command that uses the full correct path.
Change-Id: Ic75d51ecf60eef3ada9bd6ca26882de3447896e9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The APIs will be reintroduced as part of the new platform interface
API where appropriate.
Clients that still depend on the platform headers can include it
via QT += platformheaders-private.
Change-Id: Ifbd836d833d19f3cf48cd4f933d7fe754c06d2d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This adds the CMake equivalent to the classical -device-option key=value
configure argument:
-DQT_QMAKE_DEVICE_OPTIONS=key1=value1[;keyN=valueN]
The keys and values get dumped verbatim into qdevice.pri.
This patch also ports the machineTuple configure test. Its result is
written into qdevice.pri as value for the GCC_MACHINE_DUMP variable.
Change-Id: I29f2323fd87639fafaed99ec7446c7ee75504705
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Our .prl files embedded an absolute path to the OpenGL.tbd file. This
obviously breaks their usage when used on another machine when no SDK
exists.
To fix that we need to use a "-framework OpenGL" linker flag instead
of linking against the absolute path library.
To convince CMake to do that, we have to create a wrapping
OpenGL target which sets an appropriate INTERFACE_LINK_LIBRARIES
property.
So create a FindWrapOpenGL find module to do that on darwin platforms.
Adjust helper.py and our build system to use it.
This tangentially amends 38cd18384f
because it recreates the FindWrapOpenGL module, but for a different
purpose.
Task-number: QTBUG-85240
Task-number: QTBUG-84781
Change-Id: I3498c19157ae31db5099e6edfb9d71490187f1d3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
You can write the following in a qmldir file these days:
import QtQuick auto
import QtQml 2.4
pro2cmake should understand and convert these to cmake.
Change-Id: Ica1728de0c8d7a0b2b5aa341d20e60b23dfa7fe1
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
* Assume UTF-8 on all Unix like systems
* Export some functions to be able to compile QTextCodec once
moved to Qt5Compat.
Task-number: QTBUG-75665
Change-Id: I52ec47a848bc0ba72e9c7689668b1bcc5d736c29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The change fixes the labels to show up correctly in the configure
summary.
It also allows enabling the sanitizer via the feature flags, e.g.
-DFEATURE_sanitize_address=ON.
Finally the qtbase sanitizer option is saved in QtBuildInternalsExtra
so that repos built after qtbase have the same sanitizer options
enabled.
Change-Id: Ic9d9e3ce3c7ebbc244ced2e6d163d1ac8ee06b12
Fixes: QTBUG-84721
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The qt_internal_apply_gc_binaries function should apply both compile
and link flags, not just link flags.
The flags should be applied publically to all consumers of Bootstrap
regardless if the gc_binaries feature is enabled.
The flags should be applied publically to Core only in case if the
feature is enabled (aka for static builds only).
Change-Id: Id42af0d9b527004d74c04eff2c9e3c2be1e76aac
Fixes: QTBUG-84461
Task-number: QTBUG-83929
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
[ChangeLog][General] The QtOpenglExtensions module has been
discontinued. It provided only convenience functionality for certain
direct OpenGL usage. With the new RHI graphics API abstraction, that
is no longer a primary use case. Applications that still need to
access that API have a number of alternative options, including
QOpenGLExtraFunctions.
Fixes: QTBUG-84085
Change-Id: I272af61c69ebcec207b576d67d08b59623d485ec
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This patch allows tools to be built for the target platform when the
QT_BUILD_TOOLS_WHEN_CROSSCOMPILING parameter is set at configuration
time.
To avoid naming conflicts, the target tools are suffixed with "_native".
The qt_get_tool_target_name() function can be used to get the tool name
for both scenarios (cross and non-cross compilation).
Extend pro2cmake to refer to the right target name for tools.
The relevant write_XXX functions have a new target_ref parameter that
will be "${target_name}" for tools and literally the target name for
everything else.
Fixes: QTBUG-81901
Change-Id: If4efbc1fae07a4a3a044dd09c9c06be6d517825e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The ANGLE removal's manual configure.cmake changes are now replaced
by updating the conversion script's special cases instead.
Change-Id: I06317fe0202b25bd9f9524da14e1bb0ccbb30cc1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When writing the qt6_qml_type_registration call, make sure to write
the set(QT_QML_MODULE_INSTALL_QMLTYPES TRUE) statement only if an
explicit path was provided via
QMLTYPES_INSTALL_DIR / QT_QML_MODULE_INSTALL_DIR.
This will remove the QT_QML_MODULE_INSTALL_QMLTYPES property from
many examples and tests in qtdeclarative, thus not installing the
.qmltypes file into the Qt prefix, thus polluting it.
Task-number: QTBUG-84403
Change-Id: I5c64d42915896d14f2591cbb64d73d912dbf7c7d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
so that they can be used with Q_STATIC_ASSERT().
Also constify more another array.
Change-Id: I1e7208127e06abb33af9bdc46712657af5dc98fe
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The next time qurltlds_p.h is generated, array sizes shall be explicit.
Also added some helpful comments. And updated copyright date.
Change-Id: I2bc9a78bcc2982845fce75a413e2048b0bfd12a0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QMake variables are always string lists, but some variables are used to
represent single string values. People tend to fill those variables with
multiple values and expect them to be joined by spaces.
Exhibit A: qtdeclarative/tools/qml/qml.pro
QMAKE_TARGET_DESCRIPTION = QML Runtime
QMake supports this for many values. Do the same for Scope.get_string().
Change-Id: I6af22bc1bfed07a4d8eac94d7315051a5bcb7a4d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We should search for the values of function names rather than
the mapping key.
Change-Id: Iedef7fcf4d716ff7f6d277d9626d9dc2dd781401
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There are (at least) two implementations of the low-level case-folding
algorithm, one of which (for QChar::toLower()) seems to be wrong (it
doesn't deal with special cases which expand to more than one code
point).
The algoithm hidden in QString and entangled with the QString
detaching code makes reusing the code much harder.
At the same time, the dependency of the algorithm on the unicode
tables makes exposing a non-allocating result type in the public API
hard. std::u16string would be an alternative if we can assure that all
implementations use SSO with at least four characters.
So, for the time being, leave this as internal API for use in an
upcoming QStringView::toLower() as well as case-insensitive hashing.
Change-Id: Iabb2611846f6176776aa20e634f44d8464f3305c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When building examples standalone, 'INSTALL_EXAMPLESDIR' may be
undefined.
The converted .pro files now check whether the variable is
set to prevent installation into unexpected locations.
Fixes: QTBUG-81797
Change-Id: I9f97568923c8103011a41d9af7cfe02dd1e40b56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And create one for QtBase at the same time.
Fixes: QTBUG-83835
Change-Id: Icc6b022165a57bd4e22c23bdb0016522b99a5b80
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake IMPORTED targets should be namespaced so that CMake knows that
the name refers to a target and not a file.
Use the existing WrapXXX naming scheme where applicable.
Fixes: QTBUG-83773
Change-Id: I5b0b722c811200c56c260c69e76940a625228769
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This makes existing calls passing uint or ushort ambiguous, so
fix all the callers. There do not appear to be callers outside
QtBase. In fact, the ...BreakClass() functions appear to be
utterly unused.
Change-Id: I1c2251920beba48d4909650bc1d501375c6a3ecf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Now that the standard gives us proper types for UTF-16 and UTF-32
characters, use them. Will eventually make the code much easier to
read than today, where uint could be an index as well as a char32_t.
It also ensures that the result of e.g. QChar::highSurrogate() can
still be implicitly converted to a QChar now that the
QChar(non-characater-integral-types) ctors are being made explicit.
[ChangeLog][QtCore][QChar] All low-level functions
(e.g. highSurrogate()) now take and return char16_t instead of ushort
and char32_t instead of uint.
Change-Id: I9cd8ebf6fb998fe1075dae96c7c4484a057f0b91
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This feature is Windows-only and must be turned on manually.
For MSVC it sets the MSVC_RUNTIME_LIBRARY target property.
For MinGW it adds the -static linker flag.
Change-Id: I9da3b88d545b34bc34a3a80301b2dd1b5986fa88
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a publicly callable qt6_add_plugin() API to create
plugins. This API is meant to cover cases such as the plugandpaint
example.
This patch also renames qt_add_plugin to qt_internal_add_plugin in order
to avoid clashes with the public API. To avoid breaking the existing
projects, a compatibility wrapper function is enabled by default unless
QT_DISABLE_QT_ADD_PLUGIN_COMPATIBILITY is specified.
Fixes: QTBUG-82961
Change-Id: If5b564a8406c90434f1bdad0b8df76d3e6626b5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This maps to the CMake variable QT_USE_CCACHE.
Change-Id: I3258027301284d907f6ecde6c65d2c0dde8f0a11
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This maps to the CMake variable CMAKE_INTERPROCEDURAL_OPTIMIZATION.
Change-Id: Id0ce48f176b95c27e74ab80276e89503b1660f79
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature was removed in commit 60588e1a.
Change-Id: I061410dfab13a2210474014892d1bc828a5b21cf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of using CMAKE_INSTALL_RPATH to embed an absolute path
to prefix/libdir into all targets, use the more sophisticated aproach
that qmake does.
For certain targets (modules, plugins, tools) use relative rpaths.
Otherwise embed absolute paths (examples, regular binaries).
Installed tests currently have no rpaths.
On certain platforms rpaths are not used (Windows, Android,
iOS / uikit).
Frameworks, app bundles and shallow bundles should also be handled
correctly.
Additional rpaths can be provided via QT_EXTRA_RPATHS variable
(similar to the -R option that configure takes).
Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF
or QT_DISABLE_RPATH=ON.
Note that installed examples are not relocatable at the moment (due
to always having an absolute path rpath), so this is a missing feature
compared to qmake. This is due to missing information on where
examples will be installed, so a relative rpath can not be computed.
By default a Qt installation is relocatable, so there is no need to
pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R .
Relative rpaths will have the appropriate 'relative base' prefixed
to them (e.g $ORIGIN on linux and @loader_path on darwin platforms).
There is currently no support for other platforms that might have a
different 'relative base' than the ones mentioned above.
Any extra rpaths are saved to BuildInternalsExtra which are re-used
when building other repositories.
configurejson2cmake modified to include correct conditions for the
rpath feature.
It's very likely that we will need a new qt_add_internal_app()
function for gui apps that are to be installed to prefix/bin.
For example for Assistant from qttools. Currently such apps
use qt_add_executable().
The distinction is necessary to make sure that relative rpaths are
embedded into apps, but not executables (which tests are part of).
Amends e835a6853b
Task-number: QTBUG-83497
Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QT_OPENGL_ES* macros are leftovers from an earlier,
ad hoc configuration system, which has since been
replaced by QT_CONFIG. To clean things up in Qt 6,
we use the new way instead.
Task-number: QTBUG-83467
Change-Id: I578dc7695bff9d5ee303b22e44f60fee22fe0c28
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Expand $$MODULE_BASE_DIR to ${QT_BUILD_DIR}.
Add library mappings for Hunspell.
Add test mappings for QtVirtualKeyboard regarding 3rdparty Hunspell and
T9Write.
Change-Id: Ief007456d0471cbcf9a03d819291edec5f63680f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is required, so that QHash and QSet can hold more
than 2^32 items on 64 bit platforms.
The actual hashing functions for strings are still 32bit, this will
be changed in a follow-up commit.
Change-Id: I4372125252486075ff3a0b45ecfa818359fe103b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If a find_package() in a try_compile project doesn't find a package,
and we then link against a non-existent target, the configuration
failure of the compile test also fails the configuration of the
project.
To avoid that, separate library targets from non-targets, and make sure
to only link against the targets if they exist.
pro2cmake now outputs modified compile test project code which iterates
over targets and non-target libraries, and links against them when
needed.
Change-Id: Ib0f4b5f07af13929c42d01a661df2cabdf9b926b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Coin when provisioning for Android, we download and configure
the OpenSSL package, but don't actually build it. This means that
find_package(OpenSSL) can find the headers, but not the library,
and thus the package is marked as not found.
Previously the openssl_headers feature used the result of finding
the OpenSSL package, which led to it being disabled in the above
described Android case.
Introduce 2 new find scripts FindWrapOpenSSL and
FindWrapOpenSSLHeaders. FindWrapOpenSSLHeaders wraps FindOpenSSL,
and checks if the headers were found, regardless of the OpenSSL_FOUND
value, which can be used for implementing the openssl_headers feature.
FindWrapOpenSSL uses FindWrapOpenSSLHeaders, and simply wraps the
OpenSSL target if available.
The find scripts also have to set CMAKE_FIND_ROOT_PATH for Android.
Otherwise when someone passes in an OPENSSL_ROOT_DIR, its value will
always be prepended to the Android sysroot, causing the package not
to be found.
Adjust the mapping in helper.py to use the targets created by these
find scripts. This also replaces the openssl/nolink target.
Adjust the projects and tests to use the new target names.
Adjust the compile tests for dtls and oscp to use the
WrapOpenSSLHeaders target, so that the features can be enabled even
if the library is dlopen-ed (like on Android).
Task-number: QTBUG-83371
Change-Id: I738600e5aafef47a57e1db070be40116ca8ab995
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Previously the $$PWD was evaluated within the including .pro file,
which generated incorrect relative paths to source files.
Now we use a horrible hack to evaluate keys ending with SOURCES
and HEADERS. If such is a case, use a map_file transformer which
will use the included scope, thus creating correct relative paths.
Fixes projects in qtdeclarative like src/qmltypregistrar and qmllint.
Checked that it doesn't break projects in qtdeclarative and qtbase.
Change-Id: I21f1e4c638c2cf8d0f67e94e1a583ebc54c175a2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
The previous approach didn't work for prefix builds. While a target
might be excluded from building via EXCLUDE_FROM_ALL property, when
calling make install it would still try to install the target and
thus fail.
It's not possible to modify an install() command in a post-processing
step, so we switch the semantics around.
pro2cmake will now write a
qt_exclude_tool_directories_from_default_target() call before adding
subdirectories. This will set an internal variable with a list
of the given subdirectories, which is checked by qt_add_executable.
If the current source dir matches one of the given subdirectories,
the EXCLUDE_FROM_ALL property is set both for the target and the
qt_install() command.
This should fix the failing Android prefix builds of qttools.
Amends 622894f96e
Change-Id: Ia19323a2ef72a3fb9cb752ad2d4f2742269d11c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Now that we have the 'shared' feature implemented we can easily port
the 'static' feature.
Change-Id: Ia9b54b68d532d73c3d62d12a86c9e8b83e7909c8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Callers and definition were out of sync.
Change-Id: Icda26887cb64c61c7e373766f25559b0d450d112
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
We don't need the test, we can just check the value of BUILD_WITH_PCH
to know whether the feature is enabled.
Regenerate configure.cmake files.
Change-Id: I5691a22af2913bc398f99825e0c41cf2daf5a587
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Most of them are hand-written.
Change-Id: Ia3d83cdc9e279420c9b4700993b428e10cf8fb22
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some library entries in configure.json have a test entry.
An example is assimp in qtquick3d.
qmake tries to find the library via the sources section, and then tries
to compile the test found in config.tests/assimp/assimp.pro while
automagically passing it the include and link flags it found for assimp.
We didn't handle that in CMake, and now we kind of do.
configurejson2cmake will now create a corresponding
qt_config_compile_test call where it will pass a list of packages and
libraries to find and link against.
pro2cmake will in turn generate new code for the standalone
config.test project. This code will iterate over packages that need to
be found (like WrapAssimp) and then link against a list of passed-in
targets.
In this way the config.test/assimp/main.cpp file can successfully
use assimp code (due to propagated include headers).
qt_config_compile_test is augmented to take a new PACKAGES argument,
with an example as follows
PACKAGES PACKAGE Foo 6 COMPONENTS Bar
PACKAGE Baz REQUIRED
The arguments will be parsed and passed to the try_compile project,
to call find_package() on them.
We also need to pass the C/C++ standard values to the try_compile
project, as well as other try_compile specific flags, like the
toolchain, as given by qt_get_platform_try_compile_vars().
Change-Id: I4a3f76c75309c70c78e580b80114b33870b2cf79
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Python helpfully uses a sensible locale when stdout is a tty but uses
the system (not the filesystem) default encoding, which may be ascii
and unable to encode some of the data we need to save. So brute force
kludge it to ensure emit.encoding is UTF-8 when writing the output
we'll read as UTF-8 anyway.
(This matches dev's commit 0ef79d94f6
for the reworked version of the script.)
Task-number: QTBUG-79902
Change-Id: I60ddc896a308c06e01fa87e8e18e112faa17d601
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
It was causing all lines after the first, in each calendar's
locale_data[], to be over-indented. This only changes spacing.
Change-Id: Ibfc4986548eecbfdba2902cc18f44a2af669bc6d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I've taken care of all the others in the course of other changes
already ...
Task-number: QTBUG-81344
Change-Id: I44e40a0d1c9f1e1a540a5f4cd252369fdc9b2698
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Previously, if we found one element with required attributes, we would
search into it and ignore any later elements also with those required
attributes. This meant that, if the first didn't contain the child
elements we were looking for, we'd fail to find what we sought, if it
was in a later matching element (e.g. with some ignored attributes).
We would then go on to look for a match in a later file, where there
might have been a match we should have found in the earlier file.
Check all matches, rather than only the first match in each file. Do
the search in each file "in parallel" to save reparsing the XPath.
This clears the search code of rather hard-to-follow break/else
handling in loops; and currently makes no change to the generated
data.
Change-Id: I86b010e65b9a1fc1b79e5fdd45a5aeff1ed5d5d5
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
In particular, this changed the US currency formats for negative
amounts to be parenthesised versions of the positive amount forms,
rather than having a minus sign after the $ sign. Test updated.
[ChangeLog][QtCore][QLocale] Currency formats are now based on CLDR's
accounting formats, where they were previously mostly based (more or
less by accident) on standard formats. In particular, this now means
negative currency formats are specified, where available, where they
(mostly) were not previously.
Task-number: QTBUG-79902
Change-Id: Ie0c07515ece8bd518a74a6956bf97ca85e9894eb
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
When doing XPATH searches, child nodes that have distinguished
attributes that were not asked for should be skipped. This is part of
the LDML spec and matters when resolving locale inheritance. Scan the
LDML DTD (previously only scanned for the CLDR version) to find which
attributes of which tags are ignorable - all others are distinguished
- and take the result into account when performing XPATH searches.
The XPath we were using for currency formats wasn't excluding
currencyFormatLength elements with type="short" and patterns specific
to thousands (and larger multiples); this is fixed by taking
distinguished attributes into account. However, the XPATH also wasn't
specifying the always distinguished attribute type="standard" that
was, in practice, used for nearly all locales that weren't (wrongly)
using short-forms for thousands; so type="standard" is now made
explicit, so as to minimize the diff.
This leaves only twenty-one locales with a negative currency formats.
A later commit shall switch to using accounting by default (it falls
back via an alias to standard, in any case), thereby restoring the two
mentioned below that were using it by accident, but the present change
gives the minimal diff here.
Thousands-specific formats replaced with sensible ones:
* zh_Hant_{HK,MO} (Traditional Mandarin, Hong Kong and Macau)
* eo_001 (Esperanto)
* fr_CA (Canadian French)
* ha_* (Hausa, when not written in Arabic)
* es_{GT,MX,US} (Spanish - Guatemala, Mexico, USA)
* sw_KE (Swahili, Kenya)
* yi_001 (Yiddish)
* mfe_MU (Morisyen, Mauritius)
* lag_TZ (Langi, Tanzania)
* mgh_MZ (Makhuwa Meetto, Mozambique)
* wae_CH (Walser, Switzerland)
* kkj_CM (Kako, Cameroon)
* lkt_US (Lakota, USA)
* pa_Arab_PK (Punjabi, in Arabic script, as used in Pakistan; uses
arabext number system, whose currency falls back to latn's, for
which pa_Arab over-rides the thousands-format).
Format changed from an over-ridden type="accounting" to standard (so
these lost a negative-specific form) in:
* en_SI (English, Slovenia)
* es_DO (Spanish, Dominican Republic; same)
For some locales we were picking up over-rides of narrow or short list
formats, or formats for or-lists or unit-lists rather than and-lists,
in place of the standard list format, that these locales don't
over-ride, provided by a parent locale. This changed list formats for:
* en_CA, en_IN (dropped "Oxford" comma before "and")
* qu_* (Quechua; dropped "utaq", presumably meaning "and")
* ur_IN (Urdu, India; was using unit-list formats)
[ChangeLog][QtCore][QLocale] Data used for currency formats in several
locales and list patterns in some locales have changed due to now
parsing the CLDR data more faithfully.
Fixes: QTBUG-81344
Change-Id: I6b95c6c37db92df167153767c1b103becfb0ac98
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
CLDR's currency formats do have number system variation, so take it
into account. (The old xpathlite code clearly intended to do this, but
failed at it due to looking for the wrong component of an XPATH to
fix.) This changes the currency formats in use for
* all Dutch locales (because nl.xml lists a currency format for arab
before the one for latn, and they differ),
* Punjabi, Urdu - specifically pa_Guru_IN, ur_Arab_PK (both like
Dutch, arabext before latn; which is correct for pa_Arab_PK and
ur_Arab_IN),
* Sindi (whose over-ride of latn currency format we were using, where
we should be using arab's format, supplied by root's default),
* Tatar (which specifies a generic currency format, which we were
using, before one specific to latn, which we now use),
* Tongan (same as Dutch),
* Konkani (like Dutch, deva before latn) and
* several North African Arabic locales (whose default number system is
latn, rather than arab, but previously used arab's formats).
Task-number: QTBUG-79902
Change-Id: I18d8ec16bfd3a516d1bcd2f63bc7f7f15179a3f4
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Move the code out to a CldrReader class in cldr.py, expand CldrAccess
with facilities that needs, expand ldml.py to include support for more
features, finally making xpathlite.py redundant. This initial commit
aims, though, to be bug-for-bug compatible with xpathlite in its
reading of the CLDR data.
It turns out we've been using draftier data than we were aware of
(which might not be a bad thing). The xpathlite code appeared to check
for draft attributes, but these only appear on leaf nodes and most
data were fetched by finding a parent and then scanning its children
without the draft check; only am/pm data was actually being excluded
based on draft values. (We allowed contributed, for am/pm, in
addition to approved, which is all the xpathlite code allows
otherwise.) There are also some less equivocal bugs; I'll deal with
these in later commits.
Simplified number-system data look-ups; the old get_number_in_system()
was taking care of old LDML versions' placement of the number system
attribute; this is no longer needed. (It was also being used for a
currency value to which it was not appropriate, which is now handled
separately; this is one of the bugs mentioned above.) Ditched a
fall-back to nativeZeroDigit, which no longer exists in CLDR.
Change the command-line to take the root of the CLDR data tree, rather
than its common/main/ sub-directory. Support naming the file to which
to write output, as a second command-line argument, instead of always
writing to stdout (which remains the default) and leaving whoever runs
the script to redirect stdout.
Support (internally for now, while adding TODOs to give main() more
command-line options) separating the stderr output into its more and
less interesting parts; for now, continue producing both, but suppress
the least interesting entirely.
Task-number: QTBUG-81344
Change-Id: Ie611b47403a9452b51feaeeaaa0fbc8f7e84dc71
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
