Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
We must use Windows line endings in .vcxproj files to separate command
lines of custom build steps.
This amends commit f65cfadd.
Fixes: QTBUG-81553
Change-Id: I8d257f3846af7006df7f8d462b8f44efdce6a1fd
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
We always pass the same value. The builtins are also using exactly this
"cd command" unconditionally.
This deduplicates the code at the call sites of
callExtraCompilerDependCommand a bit.
Change-Id: I5c412c815d50afdac55e1b45021f37f2545ce8f0
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use the central callExtraCompilerDependCommand in the last place where
the code to call an extra compiler's depend_command was duplicated.
Note that this is in the "Bad hack" section. We're making this hack less
bad, but the comment still applies.
Change-Id: Iaa857af20ca46b2d73053d3e264c63124c87a41b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Source files that are right next to the project file result in an
empty "object subdirectory" if object_parallel_to_source is set.
We must not attempt to create empty directories.
Fixes: QTBUG-81271
Change-Id: I431f9fbe46f50fbbaa5d6a59966bfb059418036c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
De-duplicate the code that calls the extra compiler's depend_command by
using the central function callExtraCompilerDependCommand. This one
actually tries to resolve dependencies unlike the removed code that
blindly resolved relative paths to the build directory.
This fixes dependencies reported by uic which need to be resolved
against what is in DEPENDPATH.
Fixes: QTBUG-80579
Change-Id: If482e50ff3eff716fefffee82004acc076b3a547
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
Since commit 9ab043b6 we're checking for invalid file paths passed to
Qt's file system engine. When initializing the deployment tool for VS
projects we accidentally passed a file path containing '\0'. Fix that by
using an infix QString, not QChar.
Change-Id: Ieae066d20ac290354febd420abce68f28649b365
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Requires a third definition for the source-compatible but deprecated
version.
Change-Id: I260ae79f4547f99eed701b10e0b25222f81cd5ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Setting the CONFIGURATION_BUILD_DIR variable to tell Xcode where to
place the final application bundle confuses Xcode when archiving
a project, and the archive ends up without the dSYM files.
Unfortunately we can't leave it up to Xcode to place the build
artifacts wherever it wants, as Qt Creator's iOS support expects
to find the artifacts in a well-defined place. Until we've taught
Qt Creator to find the artifacts for deployment where Xcode placed
them we need to keep this logic.
We now avoid setting the CONFIGURATION_BUILD_DIR variable unless we
really need to due to in-source builds. As long as we're dealing with
a shadow-build it's okey to set SYMROOT.
Change-Id: I9661c1c57725dc8ba5a21f8467b8b61834f2e64d
Fixes: QTBUG-74841
Task-number: QTBUG-52474
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since commit 059172c6 precompiled headers did not work anymore on
macOS, because the ${QMAKE_PCH_ARCH} string was suddenly appearing in
locations where it was not replaced with the actual architecture, e.g.
the directory where the PCH files are written.
Fix this by replacing the whole file path and not just portions of it.
Fixes: QTBUG-79694
Change-Id: I925d4ee8980a0de3205a0e387a516a5c6f8cfa4b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When building an application for Android on Windows it is possible that
the command line will be too long when doing the link step. So the code
for generating a response file is moved to MakefileGenerator so it can
be used by the other generators easily. The same variables used by
MinGW can be used elsewhere then.
Fixes: QTBUG-71940
Change-Id: I6c331d12e9541a90a4a95e0154d0ea1c056489bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Precompiled headers were put in a directory which had exactly the same
name as the binary to be generated. This resulted in a failure with any
mkspec that used clang_pch_style. The g++-mkspec avoid this problem by
extending the directory name. This change adopts this technique for
clang mkspecs.
[ChangeLog][qmake] Fixed precompiled headers for the Clang compiler.
Fixes: QTBUG-72404
Change-Id: I471462e2bcb1e33f19d277c21acde0c04b1ffcd6
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The group parameter is only used when cross-compiling, mark it as unused
otherwise. This is noticeable in the cmake branch because there we build
qmake with cmake and apply the same warning flags, as opposed to the
bootstrapped qmake build when using ... qmake.
The cache file parameter in qmake is unused and the
mustEnsureWritability is only used on Windows.
Change-Id: I08655d5150f5a967c2340ee7678bad3a4d69914f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We must check whether outputs or inputVars are non-empty before
accessing them.
This amends commit 68866b1a.
Task-number: QTBUG-79178
Change-Id: Iecf6dc705bac9bef5133ae2e5ceeace5f859f175
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When qmake is run with -prl we don't need to write the glue makefile,
and doing so will end up with MakefileGenerator::writeProjectMakefile
trying to write to an invalid Option::output, resulting in warnings:
QIODevice::write device not open
Change-Id: I196b185570e7329c621c2ccb8530b43f4be51ee6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][qmake] The syntax 'LIBS += -frameworkFoo', or
'LIBS += "-framework Foo"' is no longer supported. Use the
canonical 'LIBS += -framework Foo' instead.
Change-Id: I50fd02dbfa155a0b95859734486a92bd448e87c2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
People tend to "turn off debug and release builds" by just not building
one of the variants. For example, Qt's own rcc is built in release only,
however it is configured for debug_and_release with the same TARGET for
both.
Let qmake complain about conflicting TARGETs only we're about to build
all of those conflicting targets, i.e. if build_all is set.
Change-Id: I0448bf5cb421e2d801d3cc30e0d80353fba0d999
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Do not resolve -l entries to absolute file paths for libraries in the
default search paths.
This restores behavior from 5.12.0 (commit 2327944d) for Windows
system libraries.
Fixes: QTBUG-78827
Change-Id: Ic2d4626df87308dd635afc1ab5c4b8191d3d2831
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The root of the framework bundle shouldn't contain random files,
and doing so will prevent the bundle from being signable.
We still look up prl files in the root, to keep backwards
compatibility.
Change-Id: Ifd0bc3c6e7924e89eec54d3ef9368dfc95ed402c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Commit 80dea664 broke .ui files with global includes that are not part
of the project, because we blindly added every file path that falls
out of 'uic -d' as dependency.
Introduce the extra compiler CONFIG flag dep_existing_only to bring
back the old behavior that ignores non-existent dependencies and set
it for uic.
Change-Id: I6eaa82817c932a98ebac6d08115a9815d4b9dd21
Fixes: QTBUG-78144
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
For nmake and VS projects we added the NDEBUG define for the release
configuration unconditionally within the qmake generators. To undefine
it, users had to use a nasty work-around.
Now, define NDEBUG within the MSVC mkspecs. In order to do that we
introduce the DEFINES_RELEASE and DEFINES_DEBUG variables that are
merged into DEFINES in default_pre.prf.
Users can unset NDEBUG by writing
DEFINES -= NDEBUG
in their .pro file.
Note that DEFINES_RELEASE and DEFINES_DEBUG are merged in
default_pre.prf in order to give extra compilers (like moc) the chance
to see the fully resolved DEFINES variable. This is different from the
QMAKE_CFLAGS_(DEBUG|RELEASE) variables that get merged in default_post.prf.
Fixes: QTBUG-78071
Change-Id: I381770a1d2f974fbae9b09a2254e3f2fc7842b68
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Having hard-coded absolute paths in the xcode project breaks switching
between iOS and simulator builds.
Fixes: QTBUG-77804
Change-Id: Ib655bfc774b92c413a7b94ba4d005b6e1c4d2905
(cherry picked from commit 97465b1540)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
