When showing line and paragraph separators at an offset from the start
of the string, the end of string pointer would be incorrectly set, and
we would read past the end of the string. If any part of this memory
happened to match the line or paragraph separator, then we would
overwrite it and have a crash.
I couldn't find any reliable way to test this, since the crash depends on
the contents of the memory after the string allocated by the algorithm.
But with an overflow of 100 000 characters, I found that it crashed every
time I ran the test.
[ChangeLog][QtGui][Text] Fixed potential crash when using
QTextOption::ShowLineAndParagraphSeparators.
Task-number: QTBUG-69661
Change-Id: I17d1996b883560bacdc7ce114c8aeb2b0108faea
Reviewed-by: JiDe Zhang <zccrs@live.com>
Reviewed-by: Michal Lazo <xlazom00@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A typo meant the color-table was not fixed. For safety fallback colors
are also made opaque.
Change-Id: I3e609882177604910c4343c86f00221a89af9078
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Do not overwrite stdout/stderr by default, but only if requested.
This restores the behavior of QProcess::startDetached of Qt 5.9.
Task-number: QTBUG-67905
Change-Id: Idccf7b0da7bd80f88a0624286ddf2851bc974fb1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When the connection has been encrypted we will,
in QHttpNetworkConnectionChannel::_q_encrypted, emit 'reply->encrypted'
in which user slots can be called.
In the event that the user calls abort it will, however, not abort until
the next time it goes back to the event loop (which might not happen
until after the request has already been sent).
Task-number: QTBUG-65960
Change-Id: I96865f83c47f89deb9f644c86a71948dbb0ec0d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
A default-constructed QJsonObject has no data payload, it is only a pair of null
pointers. So, when it becomes necessary to 'materialize' such an object, a
special global emptyObject constant is used as the substitute payload. There is
a small problem with this global constant though, namely that it's is_object
flag is unset. In other words, the emptyObject is not an object, but an array.
Fix by setting the is_object flag on emptyObject.
The example code in the bug report
QJsonObject parent;
QJsonObject child;
parent["child"] = child; // 1
child = parent["child"].toObject(); // 2
child["test"] = "test"; // 3
runs into this problem on line 1. Inserting the default-constructed child means
inserting a copy of emptyObject. On line 2 a pointer to this copy of emptyObject
is retrieved and cast to an object. But it's not an object, it's an array, so
things go wrong hereafter.
Specifically, on line 3, two inserts are performed, one from operator[] and one
from operator=. Each insert increments a compaction counter. The second insert
triggers compaction (QJsonObject::insert calls Value::requiredStorage calls
Data::compact) and compaction branches based on the is_object flag. Replacing
line 3 with
child.insert("test", "test");
causes the example to appear to work since compaction is not triggered and the
JSON serializer does not look at the is_object flag. Still, any further insert()
calls would trigger compaction and memory corruption.
Task-number: QTBUG-69626
Change-Id: I8bd5174dce95998bac479c4b4ffea70bca1a4d04
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I'm not sure why QSFPM purposefully emits dataChanged for a source
dataChanged that triggers a layoutChanged (i.e. due to sorting, multiple
rows are moving around). (This predates the git import in Qt 4.5.)
Surely whoever is listening will not gain much from the "small" dataChanged
after the "big" layoutChanged... anyhow, this documents the current behavior,
at least.
It also proves that the bug I saw long ago (changing a filtered-out
value used to emit dataChanged(invalid, invalid), IIRC) is no longer present.
Change-Id: I8975c549db88226b2b3393de9f8dca4f4109df15
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The copy-assign operator tests against other.d being NULL but the
copy-constructor didn't. This can only matter if the value being
copied has been moved from, so we could probably replace with an
assertion in practice, but we should at least be consistent.
Amended test to check this case too; and verified new test crashes
without this fix.
Change-Id: I46872a677775944bbdf6a9112e719873e574ae60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All test cases use QPluginLoader which will not work for static builds of
Qt.
Change-Id: I7dcddcd5213681bd3ae4cd85e49ee0bb5748f687
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The code I introduced in 4ee7425794 only
dealt with systems that reasonably used a 64-bit off_t parameter. Turns
out that we don't turn on largefile support on 32-bit Android, which
meant that the fix caused a regression.
[ChangeLog][QtCore][QFile] Fixed a regression that caused QFile::map()
to succeed or produce incorrect results when trying to map a file at an
offset beyond 4 GB on 32-bit Android systems and on some special Linux
configurations.
Task-number: QTBUG-69148
Change-Id: I2c133120577fa12a32d444488bac3e341966f8d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Using QFileSystemEntry::isAbsolute() broke handling of resource paths.
Extended QDir::absoluteFilePath() tests to cover absolute resource path
and some UNC variants also resolved in the same fix.
Amend existing filePath tests to use drives where needed.
Task-number: QTBUG-68337
Change-Id: I4f02cf67828ad93e562857118f8442037f18bab7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Eight bytes into the Binary JSON header there's a 32-bit little-endian
size, which qJsonFromRawLibraryMetaData uses to determine the size of
the stored metadata. That value is passed as a size to QByteArray, which
means certain values could cause crashes due to being too big or via
sign-extension in 64-bit.
[ChangeLog][QtCore][QPluginLoader] Fixed an issue that could cause a
crash when certain damaged or corrupt plugin files were scanned.
Change-Id: I117816bf0f5e469b8d34fffd153dc5425cec39a7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
CSS geometry constraints such as "min-height" or "min-width"
will set size constraints on the widget.
Removing the stylesheet should remove these constraints.
Task-Id: QTBUG-69418
Change-Id: I1008e4390281c90112303d72dd7d59a8acddfcd9
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When using actual memory allocation, limit to 64 MB, not the full file
size. On most systems, the memory map technique will work, so this won't
even be tried. In any case, we don't need the fix for the OOM situation
that was applied in commit e211ab76d7.
As for the memory mapping technique, this commit limits the allocation
to reasonable values given the virtual memory addressing space. Half a
gigabyte is probably acceptable on 32-bit systems, where there should be
a contiguous space for the OS to allocate the file in. This commit also
fixes an overflow when converting from qint64 of the file size to ulong
(32-bit on 32-bit platforms and on Windows).
For 64-bit systems, we currently limit to 1 TB.
Change-Id: I117816bf0f5e469b8d34fffd153dc1705a8eedc4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a screen is positioned to be above another, then the toolbutton
menu could be shown on the wrong screen if it was deemed to not fit
below the button the same screen. This ensures that it shows it on the
right screen when there is sufficient space to do so.
Change-Id: Ia626b28f74c1931904ff5b30cca17e63914d3c79
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Handle hard zero independently in each coordinate, otherwise hard zero
is never equal to anything but itself.
Task-number: QTBUG-69368
Change-Id: I8b1131472bb92efc706a04e0b067e2211a5ccb0c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
Change-Id: I9b07208413b9e101569a22505ad41f07ade4062b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
This matches an earlier fix for tst_QDateTime.
Change-Id: Idaf34a9d60d84202fd41d15455209457cc281f60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Similar to the changes made for tst_QLibrary:
0ac09c40f2
but even less intrusive.
Change-Id: I4bc0ba385e639f07f9b39cf8ba9542c27be8a3ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Writing out one test result per line in the test data files is
excessive and only bloats the log, given that this algorithm
is rarely changed.
Task-number: QTQAINFRA-2037
Change-Id: Ib9e568c7ded73d45e4b64671e97d5581a74f8f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes ambiguous template instantiation for types that derive from both
a QObject and Q_GADGET. For such types we treat them only as QObjects
as they extend the functionality of the gadget.
Task-number: QTBUG-68803
Change-Id: Ic42766034e14e5df43c4e6f7811e2c0be1dc7e74
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
To make the minimum amount of changes:
- Extract the library files into the expected hierarchy.
- Introduce a variable with the path to the directory.
- Make the static function a member function so it can use the variable
Change-Id: Ibf3106c3606d198a8deb8cb2a5cbde57207221c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a display is placed above a primary screen which has the top left set
to be 0x0, then menus that are defaulting to go up can still be
displayed on that screen when the menubar is placed on the bottom of it.
This ensures that this is the case and also adds a manual test to aid
verification of it in the future.
Change-Id: Ib657ccdc1aabfe1586c72585c087ac80a6c632c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
By disabling the "stdinprocess"-related tests/code...
... but differently. After fixing my earlier mistakes I'm getting
segmentation faults when it executes a couple different library calls
after the QProcess object has started.
Task-number: QTBUG-68596
Change-Id: Id42a1f939c000754a187dee90c4a4cdfec816232
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The "app" subfolder was already excluded in the .pro-file but Android
supports QProcess, so lets include it in the build. Unfortunately it
currently has trouble and crashes (the child process or both processes).
So we skip those tests.
Task-number: QTBUG-68596
Change-Id: I2e6d0869c408bf08b22c02145db8ce522c64c617
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To make it run we make sure it finds the syslocaleapp, however since it
causes a crash we skip the test that uses it...
"formatTimeZone" was failing, but it is the exact same issue as in
e08ba34f26, so we solve it the exact same
way.
Change-Id: Ifd5c796735775dad94acf55210cf18c0f4d375ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Same issue as has been seen a few other places: path to executable being
wrong, and then a crash when the paths are fixed.
Change-Id: I77a596c6e52d2a02a69a6b9dfe91f878b3ffe07c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The row names for this test were very unspecific.
After reverse-engineering what they are testing, I gave them proper
descriptive names, which allowed me to notice that there were tests
for "filtered in after sourceModel->setData" but not for
"filtered out after sourceModel->setData".
Change-Id: Ib79108db803ae77fb65d29cf0c0ef96c26655980
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
If you're on a Unix platform which don't have the necessary defines then
the thread will never be launched due to an error. Skip the test
instead.
Change-Id: I83159988b8f330a750c7aa328a8805e4fa478070
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QFileDialog::selectedMimeTypeFilter() returns either an empty
filter in the case when a platform file dialog doesn't implement
mime type filters, or initiallySelectedMimeTypeFilter() in the
case of Qt's file dialog. In both cases the result is incorrect.
Make it return a mime type filter corresponding to a selected
name filter. As a result, tst_QFiledialog::setMimeTypeFilters()
has to be fixed: QFileDialog::selectMimeTypeFilter() can't select
a name filter for an invalid mime type, and "application/json"
is not supported by RHEL 6.6, so replace it by "application/pdf".
Change-Id: I58d3be860a9b5e8a72cba86d74b520178115a812
Reviewed-by: David Faure <david.faure@kdab.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When testing zones "America/Mazatlan" and "Mexico/BajaSur" the test
crashes from an assert. Skip testing the zones for now.
Task-number: QTBUG-69132
Change-Id: I595089647792e9a2c094d63cb837584b8cdc9cb9
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
It causes most of the fails seen on Android.
Task-number: QTBUG-69064
Change-Id: I2f97fea41ee78e7962b8c34ed996bbe4bcb88732
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Skip a few tests that Android's time-zone information doesn't suffice
to get right.
Task-number: QTBUG-68835
Change-Id: Ibf8d213c96b29d74fc478a0ede686ae52b5200fb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Where possible. Sometimes the replacement is QTRY_COMPARE instead.
Also don't use QTestEventLoop directly when it can also be replaced with
QSignalSpy use.
Remove the TimerHelper class, since its uses can be done with QSignalSpy (and a
lambda when remainingTime is checked). Although checking static single-shot
timers still needs a target object, so use a stripped down version in those
tests.
remainingTimeDuringActivation() was not actually testing the repeating case, but
single-shot case twice, so fix that. In the repeating case the remaining time is
exactly 20 ms on my machine, but QEMU emulation seems to be slow enough for time
to advance before the lambda is executed, so relax the conditions.
Task-number: QTBUG-63992
Change-Id: Iae92ff7862a13d36e695eec63b54403ec872f2b4
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
