There are more than 1000 new entries since the table has been
generated the last time.
Some auto tests needed to be adjusted, because some entries in
the TLD table were removed while others were added.
Change-Id: I4ceec392836d2031dfef49a0c5a857c31b36bb4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Adds conversion from QJsonArray and QJsonObject, and report missing
conversion failures for other QJsonValues.
Change-Id: Ic0c3a952657912401db877b068f7fcc3c08c94c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QPlatformTheme::keyBindings() performs a binary search
into an ordered list of StandardKey -> Key Sequence
mappings where each StandardKey can have multiple
key sequences.
Previously the order of the Key Sequences in the
returned list would be indeterministic and, except
for the designated pri-1 key sequence, would not
necessarily correspond to the list order. (The
ordering was dependent on where the binary search
"hits", which again depends on the size of the list.)
This caused trouble when adding mappings, since it
would change the order in the returned key sequence
list for existing mappings and confusingly cause
(apparently) unrelated test failures.
Fix this by replacing the manually coded binary search
with std::equal_range.
One test case needed to be fixed up because it had the
result in the wrong order (verified by looking at
QPlatformTheme::keyBindings).
Change-Id: I555ca2736b1a8e6454dc79645a8246f80119cfc2
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Change-Id: I643049a865b0a8936e132e12f7845d5527f4f808
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: André Klitzing <aklitzing@gmail.com>
Use an existing, non-symlinked directory for the unit test.
Change-Id: Ice9976a4fd10c42c3cb014614ccd699bcea1065f
Reviewed-by: Augustin Cavalier <waddlesplash@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: If43dcc2b77fea5ae3ec40cc847467fc21fbd2c83
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QAbstractSocket::close() always calls QIODevice::close(), which resets
QIODevice's internal read buffer. So it makes no sense to make same calls
from disconnectFromHost(). This made the closeCalled private member
superfluous.
Change-Id: I4ec64e9711490e44e737763e4ed7fb41bffe2556
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Optional parameter DESTINATION to set target rcc file
Example:
qt5_add_binary_resources(GenerateFixture "fixture.qrc")
Task-number: QTBUG-41728
Change-Id: I9dc2fe8e7d5e9ad3873b89f75ab84a2a1b9d1d29
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Adds an SSE4.1 optimized version of qUnpremultiply and uses it in the
most drawing conversions methods. This gives a speed-up of little over
2x.
Change-Id: Ieb858a94ada1eb86d7af715ac1a100f1587f360d
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Unify the behavior of the different operator<< by always using
QDebugStateSaver (appending an optional space at exit), and making
sure that the space(), nospace() setting isn't 'leaked'.
Change-Id: I38e4f82fa6f7419d8b5edfc4dc37495af497e8ac
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This adds tests to check the behavior of a QSslSocket-based server when
presented with various client certificates.
Change-Id: I431157e46cfb00880ae8b7a33015cce50e56b6bb
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
This message is just informal, and not really relevant to the test case.
qtbase can now be built with -Werror=date-time
Change-Id: Ic14289f2f801d5a6e811869e60afb9691c7ca98b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So if you stream enum type into qDebug, it will show the name
of the enum value instead of the int
Change-Id: Iec5e826623353560319890d3e7c4ab97d0645f4a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
In Qt4, if the result of the translation
QApplication::translate("QT_LAYOUT_DIRECTION")
returned "RTL", Qt usually called
QApplication::setLayoutDirection(Qt::RightToLeft)
in order for a translation file to specify if the UI should be
left-to-right or right-to-left.
However, due to modularization, we could no longer call
QApplication::translate(), so the code was wrongly changed to call
QCoreApplication::translate(....) instead.
This was wrong, and in addition the translation files was never updated
with the new context.
This patch fixes it to only translate it with the QGuiApplication context.
This is the only sensible context, since QApplication would lack QtQuick
support, and QCoreApplication would not know how to change layout
direction.
[ChangeLog][QtGui][i18n] Fixed bug where layout direction did not switch
according to the instruction in the translation file.
Task-number: QTBUG-43447
Change-Id: Id0409a42d41b3b9ff1cd53d090c4d9c9802f5659
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... but choose HTTP/1.1 and continue connecting anyhow. According to
the NPN spec, actually we should choose SPDY:
"In the event that the client doesn't support any of server's protocols,
or the server doesn't advertise any, it SHOULD select the first protocol
that it supports."
However, some tested servers did not advertise anything and did not
support SPDY, so blindly trying the newest protocol would fail. We are
conservative in that case and choose HTTP.
Task-number: QTBUG-40714
Change-Id: Ia8aaf01fea74e13d9e4416306f85f1890b25559e
Reviewed-by: Richard J. Moore <rich@kde.org>
Disable top-level widget code path for embedded widget in the show
helper.
Task-number: QTBUG-43780
Change-Id: I574e07130e5e68a019a426cee3fde982f3883720
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Check by comparing __argc/__argv whether a modified argv was
passed to QCoreApplication. If that is the case, build
QCoreApplication::arguments() from that argv instead of using
the command line.
[ChangeLog][Important Behavior Changes][QCoreApplication]
On Windows, QCoreApplication::arguments() now returns a list built
from argv on Windows as well if a modified argv was passed to the
class' constructor.
Task-number: QTBUG-30330
Task-number: QTSOLBUG-184
Change-Id: I2498bb554130e7bfaeada3aebe786dfdd0eb534d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We shouldn't create QPixmaps when comparing QBrushes that do not
contain a QPixmap.
This patch extends the comparison logic to comparing QImage cachekeys
if the brushes are QImage based.
Note the comparison still produces false negatives on equal content on
different pixmaps and images, but this is preserving existing behavior.
Task-number: QTBUG-43766
Change-Id: I001b4032172c1e568aad311f7df2eaae6aee8dc6
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The autovectorized versions of premultiplying conversions are almost
twice as fast with SSE4.1 as with SSE2. Therefore this patch lets
compilers that can make those versions convenient without duplicating
code do that and lets us use them when available.
Change-Id: I699035963abe55a38b9ef8ba7b4a8c961c8dfcdd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Change-Id: I6b551de331aa0386ea53d8e96f50b669777d2d69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
... as newer versions of nmake (and jom, for compatibility) have botched
circumflex processing (they simply don't do it when shortcutting the shell
evaluation).
as a side effect, the output is also more readable if the string contains
quotes.
Change-Id: I0506b59ceecb70da258c482f9973156b2803066d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
don't complain about various missing things resulting from replacing
default_pre.prf and having a private .qmake.cache.
Change-Id: Ie3471b514ebb1a80b72a480144551b56b5c7a254
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Move these types to QAsn1Element so that they can use the toString()
method which guards against malicious ASN.1.
Change-Id: I7d6155147a6fc2d41da6f3ae87551b6cb75aa9ce
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
We don't currently use this class for critical things like hostname
verification however we still want to ensure that it is not possible
to trick it using ASN.1 strings with embedded NUL characters. This will
avoid problems in the future.
Change-Id: Ibf3bc142a94fc9cad5f06db50f375399a087f9dc
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
This requires being able to create a QItemSelectionModel
without specifiying its model, and also setting the model
later. Also, several classes, like QPersistentModelIndex,
need to be declared as meta-type.
Finally, and in order to introduce the 'model' property,
we need to have a type compatible getter. Hence the new,
non-const model() function.
Where needed, meta-type declarations have been removed from
auto-tests.
[ChangeLog][QtCore][Item Models] QItemSelectionModel
can now be created without a model and have one set later.
Change-Id: If49bed061a5d1012331f335ca7f6e3959ecd3f1c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
The methods for inplace conversion from RGBA to ARGB was misplaced by
one step causing conversion to RGB16 to get an invalid method.
Change-Id: I3b2b4cffe993705c48613eec7d9b7c6213f57fc2
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When multiple sections were grouped together, sectionItem.size was the total size of grouped sections, not the size of one section.
Length is supposed to be equal to the section items length, but the state saved might be corrupted.
Task-number: QTBUG-40462
Change-Id: I401a1583dd30880ccf5b4c105a237d6563f212e8
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Ctrl/Ctrl+Shift should not cause any characters to be input
(as opposed to AltGr(Alt+Ctrl) as used on German keyboards).
Extend the tests in QLineEdit and QPlainTextEdit to
check the modifiers, remove test from QTextEdit
since it is handled by QWidgetTextControl.
Task-number: QTBUG-35734
Change-Id: Ie0004fac68cf840c68247f27547e84b021355cd2
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
This commit fixes incorrect logic of icons' lookup if there are
fallbacks or more than one theme's directory.
According to Icon Theme Specification, Directory Layout section, theme
can be spread across several base directories by having subdirectories
of the same name. This makes possible to extend system themes by
application-specific icons without making of collisions with other
applications.
According to Icon Naming Specification, Icon Naming Guidelines section,
icon name may contain dashes to separate levels of specificity in icon
names. This makes possible to set in application very specific icon
which may be not in every theme. So it can fallback to less specific one.
Change-Id: Iafc813902a3646be56e8f1d3a2fdbf8fd32ac542
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add some parts of the qtdiag tool as a qtbase test to output the
graphics configuration to the CI log and to verify that Open GL can be
initialized for platforms on which the qopengl test is marked as
insignificant (for example, ANGLE).
Change-Id: Id445e57928e0307ad38cd433c52a62501f1097c6
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
If a QBrush has been created without QPixmap the texture() method will
create one. This patch avoids that in several places by checking the
type of the texture brush before accessing it, or not accessing it at
all.
Task-number: QTBUG-43766
Change-Id: If6009fe1d5bd51b239ae2c838e5c3b904b56b11a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
CppCat detected duplicate sub-expressions in the code that checked for
BottomLeftSection and BottomRightSection. It was fairly obvious to
see what the values should be.
Change-Id: Id45ca5bbd26c92b800c60867fef5170578216eee
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Add support for SSL on iOS/OS X by adding a SecureTransport based
backend.
[ChangeLog][QtNetwork][QSslSocket] A new SSL backend for iOS and OS X,
implemented with Apple's Secure Transport (Security Framework).
Change-Id: I7466db471be2a8a2170f9af9d6ad4c7b6425738b
Reviewed-by: Richard J. Moore <rich@kde.org>
With auto-vectorization enabled in QtGui, the 32bit version of
qPremultiply is faster than the 64bit version since it can be vectorized
wider (4x on 128bit as opposed to 2x). Since all our important 64bit
targets have SIMD, that makes the 64bit version pointless.
Change-Id: I4e9070a3a3c8e2b54f17a95ba0aee0405cbb8ec9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
