That basically involves reformatting the loop to use iterators.
Change-Id: Ie8e80e7f32b386eae50ab4520c62219e18d2a1bd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Nothing fancy, just a safety-net for a following refactoring.
Change-Id: I5be87c86cd61e24bf96881d2485dd7560ea6184a
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
This reverts commit 12d71f4ea2.
This change is breaking a build + incomplete as my test revealed.
Will have to re-try later.
Change-Id: I7ea089093a832aa5822caaaac56e62f5fda4df17
Reviewed-by: Liang Qi <liang.qi@qt.io>
... by using the recently-added QUtf8::convertToUnicode()
and a QVarLengthArray instead of QString::fromUtf8().
Like elsewhere in QString, use a QVarLengthArray<ushort>
instead of the more natural <QChar> to avoid instantiating
another QVLA.
Assume that length2 is usually set to a non-negative value.
Not because that's necessarily the frequent case, but
because a negative length2 leads to an expensive strlen,
that usually dwarfs the additional branch cost.
Check for data2 == nullptr early to avoid having to check
it later twice.
Change-Id: I04bda44ed857451efdf04c3283b5726480dd8c0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code depends on qApp to be visible in the scope
Change-Id: Ibeb54c90f5a65f441e9eb90b848952b955c71f0d
Reviewed-by: Jesus Fernandez <jesus.fernandez@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class doesn't exist and should not be forward declared nor declared
as private of QDBusVirtualObject
Change-Id: Icf3ca2b2be5ae0a8111785af485a0b6601002a25
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A new define for better vectorized compositioning had a mistake that
caused some sources to be converted to grayscale when composited.
Added two 10 bit per channel formats to the lancelot test to catch
regressions in the future.
Change-Id: I1c468e6b93d68185e517fc0d44c6c927f9f7135f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
The section got introduced in commit 93d35c07d0, but was apparently
ignored by browsers due to a non-blank space (0xc2 0xa0).
In commit b3959b515f the space was replaced, causing browsers
to hide the content.
Task-number: QTBUG-55115
Change-Id: I491f8721da5f2a964e450d4a0bee785a937ac7e4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Without ALPN/NPN (== without OpenSSL) we can negotiate HTTP/2
using the protocol upgrade procedure as described by RFC7540.
Since there is no TLS handshake, after our http channel was connected
we first send an 'augmented' HTTP/1.1 request - its header
contains additional 'HTTP2-Settings' and 'Upgrade' (to 'h2c') fields.
If we receive reponse 101 (switch protocol) we re-create a protocol
handler and switch to HTTP/2.
Task-number: QTBUG-50955
Change-Id: I36e9985e06ba76edaf7fdb22bb43770f8d593c61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also make use of qdoc's \note command.
Change-Id: I276300cfcfde06e82b04793dbf25df8ec73e9838
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
... so don't use emit on them.
Just confuses readers.
Change-Id: I24365fc533b5b35f8942d6014dbc68387aa23e22
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Simplify the code, remove unused members
- Fix the translations of plurals to use %n
- Add tooltip displaying full paths in list
- Add context menu allowing to copy the name and open
- Display the correct slashes on Windows
- Connect the returnPressed() signals of the line edits
- Make the search recursive
- Do not search binary files by checking the mime type
Change-Id: I3663799c88931db1f58c03ea35211e7ab03737ec
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Port to Qt 5 connection syntax.
- Remove unneeded member variables.
- Adapt to screen size.
- Add a tab widget with a hex dump view to the preview dialog.
- Handle conversion errors in preview dialog,
add status label displaying errors and warnings about failures
and invalid characters encountered.
- Fix translated messages.
Change-Id: I916100c903e73d0d2326523753ed7398b1c34df0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
The warning printed when wrapping foreign windows is
missing a parameter. Amends change
f2ef587906.
Task-number: QTBUG-41186
Change-Id: Iefbd174c1acc42e87fd1a764d96452b1745aa4c0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This simplifies the retrieval of the correct Context object.
Task-number: QTBUG-55102
Change-Id: I303bc5393a7900ceb4bde36e711938f3f49075c1
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Font style names are quite irregular and the simplistic matching
implemented in QFontDatabase::styleString(const QFont &) is unable to
properly resolve the style name when font is recreated from a string.
This causes the fonts before and after serialization to be considered
different, even though they are not. The from/toString methods were
made to write and respect the exact font style.
[ChangeLog][QtGui][Important Behavior Changes] QFont::toString() and
QFont::key() were modified to save the font's style name if one is
set, invalidating any stored font identifiers. QFont::fromString()
was also adjusted to accommodate the change.
Task-number: QTBUG-54936
Change-Id: Ibc7c54119acdd8f0950d6049cc89f859bf981504
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
- Introduce a common header file for client and server;
- Update license headers;
- Fix minor issues.
Change-Id: I3fc42fd5ba32141c702fc6679a27bf0b6a16fd26
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As it were, QStringLists were not handled explicitly when comparing
QVariants. If both QStringLists contained only a single entry, they
were treated as QStrings - if both QStringLists were empty, there were
equal (correctly so) - but if one of the QStringLists had more than
one entry, the compare function fell through to returning always 1.
As discussed here: https://stackoverflow.com/a/38492467/3444217
Added rich comparison tests for all non-numerical, non-recursive
QVariants that support them (except QModelIndex and
QPersistentModelIndex)
Task-number: QTBUG-54893
Change-Id: Icc5480d9ba056ee5efe83da566c5829caa1509d7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
An old line redefined the altStyleName variable causing sub-families to
be registered with their language-name as their style-name.
Change-Id: I8c21ad556f53ffd62f8ef9b326fb9431eea1d857
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Emoji characters as input by the virtual keyboard are received
as a sequence of surrogates. Store state internally when a high
surrogate is received and send off the sequence when the matching
low surrogate is received via input method.
Task-number: QTBUG-50617
Change-Id: I91e763ec3e0747d6852f7c5c2057a67b0c24e0f5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
One of the good features of the new connection style is that
implicit conversion is performed for the connection arguments.
However, this is also a bad feature when it comes to the old
C remnants in the C++ language: for instance, doubles implicitly
convert to ints, possibly losing precision (and GCC/Clang do not
even warn about those under -Wall, only MSVC does) or even
triggering undefined behavior.
For this reason, when using braced initialization, C++11
disables narrowing conversions or floating/integral conversions.
Use this feature when checking the arguments of a PMF-style
signal/slot connection. Technically this makes the program
ill-formed, however GCC still accepts it (but at least
warns under -Wall).
Hence, add a way to disable these implicit conversions.
This is a opt-in and guarded by a macro, as it's a source
incompatible change.
[ChangeLog][QtCore][QObject] The
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT macro has been added.
When using the new connection syntax (PMF-based) this macro
makes it illegal to narrow the arguments carried by the signal,
and/or to perform floating point to integral implicit
conversions on them. When the macro is defined,
depending on your compiler a QObject::connect() statement
triggering such conversions will now fail to compile.
Change-Id: Ie17eb3e66ce0cd780138e60d8bb7da815a4ada83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Use Qt 5 connection syntax.
- Introduce helper function to calculate the square size, remove
the existing 24 pixel limitation since that makes it impossible
to render 20pt fonts.
- Add filter chooser for font filters.
- Add menu and info dialog showing DPI and default fonts.
- Streamline code
Change-Id: I0cd4d0475b5a7ed3c475de7a413abebbe688dfe2
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Changes the lookup of the canonical "english" font name, so that also
corresponding style-name and preferred names can be found.
This patch does not use that extra information, and should not change
any behavior.
Change-Id: I40805f81e6b35dcc98f9459c5cf96f13a8d789f2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If A is B, but not all B is A, we should not register A as an alias for
B. It is better to register it as a separate font-family so when
explicitly requested only faces from the sub-family are considered.
Task-number: QTBUG-53459
Change-Id: Ie9f5db3ba3fa69a0edb5b1965cce25e4885a00fc
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Various transition functions checked on m_tranTimes.size() > 0 inside
a block which was conditioned on this already; simplify the code by
knowing this is true already. Tidied up an initializer at the same
time.
Change-Id: I3e933a69e1b71b94bfd4451e4d761844da669d33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that QCocoaMenuLoader is a singleton, we can access
it the natural way. In all cases, it already needed to
be done in an Objective-C file, so it doesn't change
anything from this point of view.
Furthermore, we decide to remove private accessor APIs
in QCocoaApplication and QCocoaApplicationDelegate which
are now redundant.
Change-Id: I4190ed2e2536b778482c513727e279c9318acb7e
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
As reported by UBSan:
tst_qtreeview.cpp:2187:36: runtime error: downcast of address 0x7ffc15749f20 which does not point to an object of type 'PublicView'
0x7ffc15749f20: note: object is of type 'QTreeView'
Fix by making the test a friend of QTreeView (and, for
Clang, of QAbstractItemView) instead.
Change-Id: I5b748696ab441a91058f4d45a18bd5ed75a6e560
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As reported by UBSan:
tst_qabstractitemview.cpp:336:23: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
tst_qabstractitemview.cpp:337:5: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
tst_qabstractitemview.cpp:338:23: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
[etc ...]
Fix by making the test a friend of QAbstractItemView instead.
Change-Id: I1a08977042296eb34e9dbdb5c0595662dbd2e5ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As found by UBSan:
qdatawidgetmapper.cpp:212:59: runtime error: member call on address 0x2b6cc8095be0 which does not point to an object of type 'QFocusHelper'
0x2b6cc8095be0: note: object is of type 'QLineEdit'
Just make QDataWidgetMapperPrivate a friend of QWidget.
Change-Id: I33d8d430c3a03b7173358d0f96dc7f850d11697c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Instead of storing a pointer to a string, store the string
in the RGBData struct. It's not as efficient as in other
such cases, because one string is particularly long, but
it's still more than acceptable.
Text size increases slightly, but data size decreases a lot
(can't say by how much, exactly, as I'm on a UBSan build).
Change-Id: I1df2985fd1ebfccd84b48315d8d319dd9e25c8e7
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Running QWidget or other raster window-based apps with
QT_QPA_EGLFS_ROTATION=180 will now flip the screen as expected.
In addition, 90 and -90 are supported too. These will affect the
reported screen geometry as well.
The OpenGL mouse cursor is repositioned and rotated accordingly. For
true OpenGL content the rotation is ignored. Hardware mouse cursors
(DRM) ignore it as well for the time being.
[ChangeLog][Platform Specific Changes] QWidget-based applications
running on the eglfs platform plugin can now request 180 or 90 degrees
rotated output by setting the QT_QPA_EGLFS_ROTATION environment
variable.
Task-number: QTBUG-39959
Change-Id: I3570b515d0233c6c6a0e813899b935ee222eab62
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
We can't forward a VerticalSortHint or HorizontalSortHint hint, because we might
be filtering extra items.
The documentation of QAbstractItemModel::LayoutChangeHint states:
Note that VerticalSortHint and HorizontalSortHint carry the meaning that
items are being moved within the same parent, not moved to a different
parent in the model, and not filtered out or in.
And some of the views rely on this assumption (QQmlDelegateModel for example)
What happens in the test is the following:
- 'model' emit the dataChanged signal when its data is changed.
- 'proxi1' QSortFilterProxyModelPrivate::_q_sourceDataChanged does not forward
the dataChanged signal imediatly, it will instead first re-sort the model and
call layoutAboutToBeChanged / layouChanged with the VerticalSortHint
- 'proxy2' would forward the layoutAboutToBeChanged with the hint, but in
QSortFilterProxyModelPrivate::_q_sourceLayoutChanged, it will redo the mapping
which will cause the changed data to be filtered.
So proxy2 can't forward the VerticalSortHint as it removed rows in the process.
Change-Id: I20b6983e9d18bf7509fe6144c74f37d24e4a18c2
Reviewed-by: Tobias Koenig <tobias.koenig@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The Freetype cache was almost completely disabled by
134c6db858 because after that
change, the lockedAlphaMapForGlyph() function would no longer
cut off early for empty glyphs like spaces, but rather go
through all alpha map functions before it realized that there
was nothing to render. This would in turn invalidate the cache
for every empty glyph, causing all glyphs to be rerendered for
every isolated word.
This change adds back a cut off. This is only needed in the
lockedAlphaMapForGlyph() function, since the superclass implementation
of the other alpha map functions already contains a cut off for
width/height == 0.
[ChangeLog][Qt Gui][Text] Fixed a performance regression in Freetype
engine that was introduced in Qt 5.5.
Change-Id: I381285939909e99cc5fb5f3497fecf9fa871f29a
Task-number: QTBUG-49452
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Android 7, some fonts are packed in .ttc files. We fix this
simply by including them when populating the font database.
Freetype supports this and in fact,
QBasicFontDatabase::populateFontDatabase() also adds *.ttc.
[ChangeLog][Android] Fixed CJK font resolution on
Android 7.
Task-number: QTBUG-53511
Change-Id: Iebe51b0e6ba2d6987693306cd9a12013ce886b58
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Previously, detach() would detach on every style change. But there
are only three QBrushData classes, thus many styles use the same.
So instead of checking for style identity, check for style equivalence,
where equivalence is defined in terms of use_same_brushdata().
Change-Id: I7548c6022a45e542ca0d3ea00d837cd4ff93df34
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
QTextDocument is used from several different Qt modules so it needs to be
possible to access its privates from outside of Qt Gui.
Change-Id: I8087f8312e0db46bd457a6119d974caa27660d57
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In Qt Quick there are many places which copy mouse events repeatedly,
with the only goal of adjusting the local position. Instead it's much
more sensible to re-use the same event.
Change-Id: I2c6f2b73ee3a7a6df489f813cf2f60b48a6e48df
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Show QMimeType::genericIconName() to description pane.
Change-Id: I698d07084b6396469686057ea53e2f497fdbe287
Reviewed-by: David Faure <david.faure@kdab.com>
As reported by UBSan:
tst_qtreeview.cpp:663:5: runtime error: load of value 4294967295, which is not a valid value for type 'DragDropMode'
Instead of abusing -1 to indicate to not set the dragDropMode,
use a separate boolean field in tha data.
Change-Id: I13e7539c858f3b2462d57d660062ef3cb7aec61b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Before actually deleting QTreeWidgetItems from QTree{Model,Widget{,Item}} dtors,
their 'view' members need to be set to nullptr, lest they attempt to delist
themselves from the list of top-level items.
For the QTreeModel::headerItem, this was forgottten.
Found by UBSan:
qtreewidget.cpp:1488:70: runtime error: member call on address 0x7ffd843dd470 which does not point to an object of type 'QAbstractItemView'
0x7ffd843dd470: note: object is of type 'QWidget'
#0 0x2b83d5b48323 in QTreeWidgetItem::~QTreeWidgetItem() src/widgets/itemviews/qtreewidget.cpp:1488
#1 0x2b83d5b48860 in QTreeWidgetItem::~QTreeWidgetItem() src/widgets/itemviews/qtreewidget.cpp:1535
#2 0x2b83d5b41659 in QTreeModel::~QTreeModel() src/widgets/itemviews/qtreewidget.cpp:143
#3 0x2b83d5b41bc0 in QTreeModel::~QTreeModel() src/widgets/itemviews/qtreewidget.cpp:146
#4 0x2b83df220747 in QObjectPrivate::deleteChildren() src/corelib/kernel/qobject.cpp:2010
#5 0x2b83d4603dd0 in QWidget::~QWidget() src/widgets/kernel/qwidget.cpp:1675
#6 0x2b83d4d76066 in QFrame::~QFrame() src/widgets/widgets/qframe.cpp:256
#7 0x2b83d5270442 in QAbstractScrollArea::~QAbstractScrollArea() src/widgets/widgets/qabstractscrollarea.cpp:575
#8 0x2b83d5733eb9 in QAbstractItemView::~QAbstractItemView() src/widgets/itemviews/qabstractitemview.cpp:617
#9 0x2b83d598b216 in QTreeView::~QTreeView() src/widgets/itemviews/qtreeview.cpp:206
#10 0x2b83d5b218b6 in QTreeWidget::~QTreeWidget() src/widgets/itemviews/qtreewidget.cpp:2549
#11 0x4eef42 in tst_QTreeWidgetItemIterator::updateIfModifiedFromWidget() tests/auto/widgets/itemviews/qtreewidgetitemiterator/tst_qtreewidgetitemiterator.cpp:1089
Change-Id: I57c277adee8c99eb07b274d6d8ea1f6fbf3575be
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
