We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The most common mouse wheel movement corresponds to angleDelta().y().
We have previously allowed the user to use either wheel to scroll either
a horizontal or a vertical scrollbar when the mouse is hovering over it;
but 7d29807296 changed it so that the
vertical mouse wheel could no longer scroll a horizontal scrollbar.
The behavior is now restored as it was in
59cc316620.
Task-number: QTBUG-81007
Change-Id: Ieacdce539d5311499a86af645bbe0d5098e16be6
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When not doing fat builds, QMAKE_MAC_SDK_PATH defaults
to iphoneos sysroot, which breaks compilation.
This fixes compilation when user sets also CONFIG-=device
Change-Id: I1d18269946cd2a5608e26d943159c824f31db09a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Doing only debug build is not supported at the moment.
Add error to configure.
Task-number: QTBUG-71990
Change-Id: If35d00c3f09d733efe63d5ea66d07e4a3ec922cc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It has been a QPoint for a long time now, to support both the usual
vertical mouse wheel and also the wheel tilt for horizontal scrolling,
or the actual horizontal wheel if the mouse has one, or the simulation
of a horizontal wheel via touchpad gestures; but the docs continued to
read as if it was just one value.
Task-number: QTBUG-71575
Change-Id: I3efa686ace4f09c7f237f72bf0500fbfbd3213cb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Based on Glen Johnson's patch, but rearranged to avoid repetition.
Fixes: QTBUG-81248
Change-Id: I9c23ab233ebd5514bc05fd155999597ada7295ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The call to qRegisterMetaType() has been removed since the type
is registered as a meta type in Qt 5. Assert on the meta type id instead.
Adapt the documentation accordingly.
Fixes: QTBUG-81254
Change-Id: I0cb459d0dda7a82fc37871605ff634004af0f9f9
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Because MSVC warns. Added by me on commit.
c496fee2a5
Fixes: QTBUG-81310
Change-Id: I596aec77785a4e4e84d5fffd15e93a8e367e035e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
An empty QTextDocument already contains a block; so when the formatting
is fully determined, if the document is still empty, then instead of
inserting a new block, we can set formatting on the cursor, which
affects the pre-existing block, before inserting text. This avoids
leaving a blank line (the default block) above the inserted content.
Fixes: QTBUG-81060
Change-Id: I14e45e300a602493aa59680417d74d4c2b25862d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
You cannot be sure that property with specified key in
a global object is really a canvas.
Should use `document.getElementById`.
Change-Id: Ife55adaad5517aed64122b0c9bff32489cf19a2f
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Minimal fix for the missing wakeup issue, in leu of
a new event loop implementation.
So far, emscripten_async_run_in_main_runtime_thread_
looks to be our option for scheduling calls on the
main thread. This function is available on emsdk 1.38.22
and higher.
Requires making from QEventDispatcherUNIX::wakeUp()
non-final. The future event dispatcher implementation
will not inherit QEventDispatcherUNIX, so this is a
temporary change.
Fixes: QTBUG-75793
Task-number: QTBUG-76007
Change-Id: Ie6f6ee6f7674206fc0673a4fe866ac614432ab65
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Use QStringIterator rather than indexed loops. This fixes handling of
non-BMP code points (which may be lower or uppercase, see the test).
Change also the semantics of the functions, adopting Unicode §3.13
definitions: a string is lowercase/uppercase if it's equal to its
own toLower/toUpper folding.
As a side effect, empty strings are now correctly reported to be
lowercase AND uppercase.
[ChangeLog][Important Behavior Changes] The semantics of
QString::isLower() and QString::isUpper() have been changed to match the
Unicode specification. Now lowercase (resp. uppercase) strings are
allowed to contain any character; a string is considered lowercase
(resp. uppercase) if it's equal to its own toLower() (resp. toUpper())
folding. Previously, a non-letter character would make the string not
lowercase nor uppercase, and the mere presence of an uppercase (resp.
lowercase) letter would make isLower() (resp. isUpper()) return false,
even if the letter wouldn't change under case folding. As a
consequence, now empty strings are lowercase and uppercase.
[ChangeLog][QtCore][QString] Fixed a number of bugs of
QString::isLower() and QString::isUpper(). Empty strings are now
correctly reported to be lowercase (resp. uppercase), and strings
containing code points outside the BMP are now correctly handled.
Note that the behavior of these functions has also been changed.
Change-Id: Iba1398279a072399a9f21295fe75f6e414f3f813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sort alphabetically and add recent relevant options with version
information.
Change-Id: I10c8cc82ce357775ed68cb811a0c906cd38633a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Clang does seem to understand __declspec(nothrow) as
used by the COM macros like STDMETHOD. Suppress the warning,
fixing errors like:
qwindowsfontenginedirectwrite.cpp(105,24): error: 'AddBeziers' is missing exception specification '__attribute__((nothrow))' [-Werror,-Wmicrosoft-exception-spec]
Task-number: QTBUG-63512
Change-Id: If582cb0c12c62a7d12c4ae702747aac1f735db3c
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The windows filesystemwatcher did not watch for attribute changes for
directories (e.g. hidden flag) so it was not in sync with other
backends. Fix it by adding FILE_NOTIFY_CHANGE_ATTRIBUTES to the watch
flags when watching a directory.
[ChangeLog][QtCore][QFileSystemWatcher] Fixed a bug that caused QFSW not
to watch for attribute changes on Windows. Now it will correctly report
when files and directories become hidden or unhidden, for example.
Fixes: QTBUG-80545
Change-Id: I31767a0da899963e3940b4f5b36d1d581e6aa57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Based on the documentation for positionFromPosition, if the resulting
position is less than 0 or longer than the text, then we should return
nil. This fixes problems with placement of the cursor and selection
rectangle when auto-completion is used.
Fixes: QTBUG-79445
Change-Id: I44a18881527a8a22012fe5fcbbc3216e60c48bc9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It had create()'s default number options when passed to create, so
wasn't useful then; and otherwise shadowed the value held by the
cached private for the default locale. Noticed in the course of adding
an analogous global for the system locale.
Drive-by - eliminated a redundant language != C check.
Change-Id: I5601dc09188804c11dede5be460bfdd12b8152ce
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add missing \sa lines, clarify what the exponential character is and
mention that C is an exception to the "no number options set".
Change-Id: I13ca483a07738908640408e0ca512de31586cec9
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QLocale methods that report the fragments used in making up
numbers all return QChar. A note dating from before Qt5 times warned
that we need to change these to return QString (since we might need a
surrogate pair to represent the relevant characters). Give advance
warning in the documentation that this shall happen at Qt 6.
[ChangeLog][QtCore][QLocale] decimalPoint(), groupSeparator(),
percent(), zeroDigit(), negativeSign(), positiveSign() and
exponential() still return QChar but shall be changed to return
QString in Qt 6. Callers are encouraged to switch to QString early,
exploiting the QString(QChar) constructor.
Task-number: QTBUG-81053
Change-Id: Ia802c7665676ecf13669c6a6f173f2e70eac578e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
To be feature parity with evdev touch which already supports this
Change-Id: Ie7f9c868ea888725b24c3855106e1c0c0ba943a9
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The actual logging code, qt_message_print(), uses toLocal8Bit(), so
testing by comaring with toUtf8() isn't robust.
Change-Id: I7d6614e4af8c679674dbbf4ff47a88b2b75fc2dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix tst_QNoDebug::streaming() to use toLocal8Bit(), to match
QTestLog::ignoreMessage(), which uses fromLocal8Bit().
Change-Id: I65f7b995a582aeab7b7ba61781a229fecd1ed3c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Returning a QByteArray required doing a toUtf8() to a QString on one
of its paths, which was promptly undone by its caller using
fromUTf8(), since a QString was needed anyway.
Drive-by - remove spurious default for parameter in method definition.
Change-Id: I45f553d74cd0ba9dab25c439ba8291c00b7ceb5b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The device counts were used before they were initialized, causing
problems e.g. with mouse cursor.
Fixes: QTBUG-81207
Change-Id: Ic9dadcaebeb4c4a64bb506e4236d5a9260e0fdbc
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Obsolete SDK_INT Version Check
------------------------------
This check flags version checks that are not necessary,
because the minSdkVersion (or surrounding known API level)
is already at least as high as the version checked for.
The mindSdkVersion in templates/AndroidManifest.xml is 21 for Qt 5.14
and androiddeployqt also ensures that the minSdkVersion is not below 21.
Change-Id: I452de5b152f572efc69e6b292a8b15dbbfba639b
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
(cherry picked from commit b8e404f6d0631e04d30a864dc68b0574bfca90f1)
... in docs, comments, and warnings. Also adopt
some occurrences around there and in the snippets.
Change-Id: Icc0aa0868cadd8ec2270dda794bf83cd7ab84160
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The argument is only used when the application palette is set,
(as opposed to setting the palette for a specific widget class),
and that code path is only triggered from QApplication::setPalette,
which passes 'true' for this argument.
Change-Id: I67a1cc3741f6f62653b0f95ff88d28228f9977d4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This argument name makes an error with "line 302:Type t = Undefined;"
Change-Id: I5488ff02ab7c9f9391c17361da5e2aac2727a6a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The expression "a + offset + N" will eventually calculate an address
past the end of a, since we are comparing to end. That's undefined
behavior. Instead, calculate end - a and compare that to offset + N.
This commit subtracts "a" from both sides of the inequalities and swaps
the two sides to make them obey Qt coding style. Testing with GCC 9
(which is the only one I care about) shows the compiler generates the
same code.
Fixes: QTBUG-81218
Change-Id: Id84da383373844f3a4b0fffd15e7c1ab904daccd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It's causing build failures on GCC 4.9 due to our code hitting
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57694
(at least since de82d239f8).
Task-number: QTBUG-80997
Change-Id: I80a9d1fcbf26d8c0bf514ddc7bdb86eb7173360f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This leads to crashes for instance when displaying a text cursor
in a graphics scene.
Change-Id: I1b5c884ddb8325a7f5bdbc6027f0fae13f139a1c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Properly scale size hints to the new scaling factor.
Fixes: QTBUG-80476
Change-Id: I1081c9b01560f7e434f0f1de0199ef3d3cae787c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QApplication tries to close all windows on quit using closeAllWindows,
but closeAllWindows skips some windows, in particular any widget with
WA_DontShowOnScreen set.
QApplication then tries to verify that all windows have been closed,
and that logic should skip the same kind of windows as closeAllWindows
does.
We include WA_DontShowOnScreen so that widgets that are proxied via
QGraphicProxyWidget will not prevent the application from quitting.
There's still some divergence between closeAllWindows and the logic
in QApplication::event's quit handling, but aligning that requires
more work than this particular fix, and should probably also be
based on using the return value of tryCloseAllWindows() directly.
Change-Id: I2555eeee0cb04b8e736109fed57f37150efd1964
Fixes: QTBUG-81107
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Change the default rounding policy to "Round" so that 2 is used
for 150% (144DPI) on Windows, as it was in 5.13.
Fixes: QTBUG-80934
Change-Id: I0cba986ce6afc9e2737c656000ad854c07844360
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Previously, there was only a Python compile test which triggers
only when PySide2 is found. Rename it to pythonCompile().
Extend the TestEntry structure by adding the base line file
and flags, which represent all special cases found in the code.
Check for the presence of a Python base line file in addition
to the C++ one.
Prototypically add one form. Further forms can be added
on the go.
Task-number: PYSIDE-797
Change-Id: Ic2983fa3cab2399a6809e244f93c663e0212f675
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Add missing call to QHighDpi::fromNativePixels(), retrieving
the screen from the menu.
Task-number: QTBUG-79248
Change-Id: I9f358c8010615c3f96ed9dc3b6666013ae9a0ed9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
As long as we do a multi abi build in one go there is no easy way for us to know
where the ssl libs are located for each ABI. The easiest way is to use libs
prefixed with the ABI.
For configure set we are using "_arm64-v8a" prefix as the configure script will
always use arm64-v8a to run the tests.
Don't show the OPENSSL_LIBS example as it won't work on Android.
Here https://github.com/KDAB/android_openssl/commit/ebb0b68be4 you can find
a script which builds these libs.
Fixes: QTBUG-80862
Change-Id: I019c2a208ae48a7356b8f3933d0f4aad5ac156a3
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
De-duplicate the code that calls the extra compiler's depend_command by
using the central function callExtraCompilerDependCommand. This one
actually tries to resolve dependencies unlike the removed code that
blindly resolved relative paths to the build directory.
This fixes dependencies reported by uic which need to be resolved
against what is in DEPENDPATH.
Fixes: QTBUG-80579
Change-Id: If482e50ff3eff716fefffee82004acc076b3a547
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Change e453222414 tried to map global
position directly from the desktop to the window that should receive
the event. That's fine for single-window applications; but media
players like OBS and VLC often use embedded windows to play video.
So the mapping needs to traverse the window parent hierarchy somehow.
In this patch it's done by calling QWindow::mapFromGlobal(), but that
only works with integer coordinates (QPoint). To preserve the fix
for QTBUG-48151 (and other jitter bugs), we need sub-pixel accuracy;
so we have to add back the fractional part after mapping the int part.
Fixes: QTBUG-77826
Change-Id: Ib52ce14138e477182e0ef53b0ff30ce1eff40372
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
