When QMAKE_TARGET_BUNDLE_PREFIX is set in the .pro file then
this value should be used instead of the default value for
PRODUCT_BUNDLE_IDENTIFIER. Therefore, PRODUCT_BUNDLE_IDENTIFIER
should be set inside default_post.prf so that it can take the
value of QMAKE_TARGET_BUNDLE_PREFIX after it may have been set.
Task-number: QTBUG-66462
Change-Id: Iec1e2a43632efe6021b9d6bfdb78bd941326c456
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
instead of pre-resolving them and passing the final LIBS to qmake, pass
raw QMAKE_*_LIBS* assignments and a QMAKE_USE stanza. the immediate
benefit of that is that it centralizes the debug/release lib handling,
which makes build variant overrides available to all libraries, not just
a few selected ones.
note that this removes the CONFIG+=build_all from the test projects.
turns out that this was ineffective to start with, as config tests are
built with an explicit CONFIG-=debug_and_release. we might re-instate it
in a non-broken way later on.
Change-Id: I2117c5b36937e8230bd571dcee83231515cbe30b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this de-noises the code somewhat, and makes it possible to eval() the
code generated by $$qtConfLibraryArgs(), which we want to do later.
Change-Id: Ib6101c6745101801e34f8fab1ad6651e624130c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add support for QSurface::VulkanSurface and QVulkanWindow.
Usage:
1) Build MoltenVK according to instructions
2) Configure Qt: ./configure -I /path/to/MoltenVK/Package/Release/MoltenVK/include
3) export QT_VULKAN_LIB=/path/to/MoltenVK/Package/Release/MoltenVK/macOS/libMoltenVK.
Implement support for QSurface::VulkanSurface by enabling
layer mode for QNSView and then creating a CAMetalLayer,
which the MoltenVK translation layer can run on.
MoltenVK provides an implementation of the Vulcan API,
which means that the platform integration is similar
to other platforms: implement a QCocoaVulkanInstance
where we pass the QNSView instance to the vkCreateMacOSSurfaceMVK
Vulkan surface constructor function.
Using Vulkan directly without QVulkanWindow is possible, but not
tested.
We currently load libMoltenVK at run-time and use the
existing QT_VULKAN_LIB environment variable to set its
path. For deployment purposes it would be better to
link against MoltenVK.frameworkm, but this
Task-number: QTBUG-66966
Change-Id: I04ec6289c40b199dca9fed32902b5d2ad4e9c030
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
relative paths must be resolved against $$OUT_PWD, not $$_PRO_FILE_PWD_.
Task-number: QTBUG-58991
Change-Id: I9ce8e9c78e0fad026a7cc355852d23f9d6e96ee6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Add qmake feature and configure option, which optimze the size of static
exectuable. Use for static build.
Enabled via configure --gc-binaries, or CONFIG += gc-binaries in 3rd party
projects.
Change-Id: I3c25b02caaef6a4afc6019afc9c67122dd11696d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need to make sure we don't emit CMake declarations for private
headers if those headers are absent. However, most of the time we have
private headers and should add them.
Task-number: QTBUG-37417
Change-Id: I639eb93d008de27928dedac540894af70c1883b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Writing out the $TARGET_plugin_resources.cpp file in !build_pass breaks
when TARGET is adjusted by $qtPlatformTargetSuffix values. We end up
writing out $TARGET_plugin_resources.cpp but the debug Makefile looks
for $TARGET_debug_plugin_resources.cpp.
Try using the pro file name as name source instead, as suggested by
Ossi.
Task-number: QTBUG-67931
Change-Id: I221cf9b2ec1db699568d0c73513aa66ecf0ada97
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
don't put them into GENERATED_HEADER_FILES, as they obviously cannot be
found in a pre-synced source dir. instead, let the injection code itself
add them to INJECTED_HEADER_FILES.
Task-number: QTBUG-67813
Change-Id: Id2a7c565b14fcba8aba9d1dd8b1dd39c586d0d91
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
these are actually redundant with INJECTIONS.
Change-Id: I0a71930401e00d30c9898b4d958de5e89c496d18
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
RCC generates code that registers resources automatically on program
startup via global constructors. When linking statically and nothing
references the symbols in the .o file compiled from the RCC generated
code, then the linker will discard the embedded resources and they will
not get initialized. That is why for static linking it is necessary to
explicitly initialize resources using the Q_INIT_RESOURCE macro.
We can avoid the need for the explicit initialization in the context of
plugins that are statically linked into the application. resources.prf
can generate a .cpp file with a helper function that contains all the
Q_INIT_RESOURCE calls for all resources in the plugin. That helper
function in turn is injected into the plugin entry point, which in turn
is guaranteed to be included in the final binary.
Change-Id: If1abf9c85ef92935020af073b989c58c1ae6ca63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the 'info' variable was re-used too early. make a new one 'infoargs'
instead.
Task-number: QTBUG-67286
Change-Id: I77881ecbfce338d653358c5e5edac84e1c0c7de3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In order to be able to build and test a testcase on an iOS device it
needs to be a bundle. So the app_bundle config should only be removed if
the testcase_no_bundle is set. This is already done by testcase.prf.
Task-number: QTBUG-45211
Change-Id: I4f16ea832ccff2a5db5fed0050fa0344b4ac9ad6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The android mkspecs had their own way of doing the same as optimize_size
Change-Id: Id05822df6bdeb8b3aafada2901bd61530c490fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
instead of relying on more or less accidental qmake behaviors regarding
the base dir for relative paths (esp. if a file does not exist yet),
make everything explicit. to that effect, clearly define the base tree
(source or build) for every syncqt-generated variable, and write only
in-tree relative paths to the variables. on the receiving end, resolve
the paths as soon as headers.pri was read.
Task-number: QTBUG-67111
Change-Id: I32ae5760fb62ebc650fdb69e46aac786a8141564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
that way we can create a config.log which is consistent with the end
state even if (some) tests are not executed this time around.
Change-Id: Ia953ede62d6640aab912559f435ceb1f9ec6d9dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove references to XKB and explain what to do if
pkg-config is missing or unwanted.
Change-Id: I099bf01ff49e1b8f6e822a50f0fe4904965a7a9f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some mkspecs do not support c++ strict mode.
We should allow them to build Qt with GNU extenstions.
Change-Id: I0d76cf95355b38953e3475773ec5474c856e1370
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Allow QML modules to request installing QML files on the file system
regardless of whether the QML files are embedded to resources.
Qt Quick Controls need both; external QML files, that are prioritized
over compiled resources, can be left out from the final deployment
package.
The desired setup can be configured as follows:
CONFIG += install_qml_files builtin_resources qtquickcompiler
With this, there is no need to write custom install/copy/qrc rules
for QML files.
Change-Id: I2ff2974b64efaea341b6ebb4c9fc2612497d7a33
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For "import MyModule", the QML engine looks for a qmldir file in
$eachImportPath/MyModule.
One of the built-in import paths is ":/qt-project.org/imports". This is
meant for static "plugins", where the resources and the plugin are already
inside the binary image.
For dynamic plugins, the qmldir file is what enables the QML engine to
find the plugin in the first place, so it makes no sense to embed it
inside the plugin's resources.
Change-Id: I29f006efb58d91f7e5212c347087535b06e8c637
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For correct debug/ and release/ suffix substitution and thus avoid
concurrent access to generated files, we have to declare the output
directory variable used by qtquickcompiler.prf in qtdeclarative here and
enable it for substitution.
Change-Id: Id8483daffdf1b9990396c55f7bc0d08a2f65cafd
Task-number: QTBUG-66675
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The change causes a crash when compiling the xkbcommon 3rdparty
library and compile failures (qtimageformats on Android).
This reverts commit a47cb14680.
Task-number: QTBUG-67326
Task-number: QTBUG-67327
Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated files should be added to RESOURCES with an absolute path.
Task-number: QTBUG-67011
Change-Id: Ief82b576824df9abd0901970f076e30dfe57b7d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When Qt is configured for both debug and release, and frameworks are
enabled, we produce two dynamic libraries inside each framework, eg:
QtCore.framework/QtCore
QtCore.framework/QtCore_debug
When building an executable against these frameworks, we pass -framework
QtCore, and the resulting executable will have its LC_LOAD_DYLIB load
commands pointing to e.g.:
@rpath/QtCore.framework/Versions/5/QtCore
When running the executable, the dynamic loader will load the dynamic
library dependencies based on these load commands.
By setting the DYLD_IMAGE_SUFFIX environment variable at runtime to
'_debug', the dynamic loader will prefer the debug versions of each
library inside the frameworks.
Unfortunately the use of an environment variable to choose debug or
release versions leaves room for mismatches between the executable
and the libraries that are loaded. An executable built in debug
mode will at runtime pick up the release versions of the Qt libraries
unless the DYLD_IMAGE_SUFFIX has also been set to match the build
configuration of the executable.
This results in confusing situations such as building your application
in debug mode, and then stepping into Qt code but not getting any
symbols. Qt Creator has an option to run the application with
DYLD_IMAGE_SUFFIX set, but this is not enabled by default due
to the startup cost of loading the Qt debug libraries.
More critically, it results in tests failing when the tests are using
QTest::ignoreMessage to ignore warnings produced by Qt, and these
calls are ifdefed (correctly) inside QT_NO_DEBUG, as the test
(built in debug mode) will then expect warnings from Qt, but those
warnings are not emittet, as the test is run against the release
version of the Qt libraries.
To mitigate this mismatch, we now link the Qt frameworks using
an explicit suffix, just like we would for no-framework builds
on macOS, for debug and release builds on Windows, and for
normal builds on other Unixes, leaving the dependency chain
for the application predictable:
@rpath/QtCore.framework/Versions/5/QtCore_debug
This also conceptually matches how Xcode builds applications and
frameworks, where it never relies on DYLD_IMAGE_SUFFIX, and instead
uses two separate build directories, one for each configuration.
The change means that Qt Creator will always load the Qt debug
libraries if the application is built in debug mode. For Qt
development this is a good thing, as you expect to be able to
step into Qt code. For our users, the added startup cost can
be mitigated by shipping our binary packages as release-only,
but with separate debug info enabled.
Change-Id: Ib9f1f2dab90ed00b9fb011200e3a69c71955e399
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some tests are not written to handle running on a retina screen,
resulting in additional test failures when trying to fix a CI test
failure on a local retina-enabled machine.
Change-Id: I0fed33c38792b686ac83abba2bfbc45623382200
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On Apple OSes, both compilers and linkers are given an absolute path.
For consistency, the same should be done with the C linkers.
The change is also a convenience to the MacPorts project,
which actively discourages ambiguous compiler names.
(https://trac.macports.org/wiki/UsingTheRightCompiler).
Change-Id: Ic1885aed825340696e9fde766788eebf51de3ff6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I7d5f211e2441415134c5905b159b41dc3b2b231b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is needed to be compatible with latest Qualcomm BSP releases.
This patch also makes it possible to select HW layer via
QT_OPENWFD_CLIENT_ID and QT_OPENWFD_PIPELINE_ID environment variables.
Change-Id: Ie795b21afc61a1de7c1d0b52cdb30a754e3f8266
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit 00f693d3e5046999270c92731e34a3e7fcd01c6b)
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
