Those can be trivially removed as they have direct replacements, or
are completely unused.
The migration path for QCursor::bitmap and QCursor::mask is
QBitmap *pb = c.bitmap(); // up to 5.15, warns in 5.15
QBitmap vb = c.bitmap(Qt::ReturnByValue); // from 5.15, works in 6
QBitmap b = c.bitmap(); // from 6.0 on
Change-Id: I3b3acd1c7f09c4c8414e98b3ce11986f1ecd5eda
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Also add a piece of documentation that the input needs to be
in lower-case (the implementation uses qt_hash to index into
a table of TLDs, and qt_hash is case-sensitive).
Change-Id: I911c0e2bb0826fc1b0fc01ed60bdfd6e4c0298f2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For kinetic wheel events, Qt tries to make sure that all events in the
stream go to the widget that accepted the first wheel event.
It did so by directing all events from the stream to the widget from
which the spontaneous event was returned as accepted.
However, that widget might have passed the event on to some other
widgets; e.g QScrollArea forwards wheel events from the viewport to the
relevant scroll bar. The event might then have come back accepted only
because parent propagation kicked in (the scrollbar might not accept
the event, so the parents get a chance, and some parent's scrollbar
ultimately accepts the event).
In this scenario, the wheel widget would be the viewport under the
mouse, when it should have been the scrollbar of the parent. The
next events from the stream were then delivered to a widget that didn't
scroll; and parent propagation is not (and should not be) implemented
for the case where Qt has a wheel widget.
Instead, make the first widget that accepts any initial wheel event
the wheel widget, even if the event was not spontaneous. With this
change, all events from the stream are delivered to the widget that
actually handled the event. That has the effect that ie. a viewport
of a scroll area only gets the first event; all following events are
delivered directly to the scrollbar.
The test case added simulates the different scenarios - nesting of
scroll areas, classic wheel events and a stream of kinetic wheel
events.
[ChangeLog][QtWidgets][QApplication] Wheel events from a device that
creates an event stream are correctly delivered to the widget that
accepts the first wheel event in the stream.
Change-Id: I5ebfc7789b5c32ebc8d881686f450fa05ec92cfe
Fixes: QTBUG-79102
Pick-to: 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The method should move out of Qt together with QTextCodec in Qt 6.
Qt 6 will in any case always assume utf8 for 8bit encoded HTML.
Change-Id: I68adbc1f0df7e36a82ef6b434ee3771f23e3b790
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QMainWindow tries to avoid memory allocations by caching tab bars that
are no longer used. That cache is populated when the layout is
activated.
The layout might never be activated when the main window is never shown,
in which case adding and removing dock widgets at runtime will
continuously allocate more memory for tab bars that are created.
A workaround is to call QMainWindow::layout()->activate() explicitly in
application code, once all dock widgets have been removed. This change
avoids that applications have to do that.
Change-Id: I70eb585d2120f0b7b73f59c3ee65d7242c12ec59
Fixes: QTBUG-83135
Pick-to: 5.15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When hiding a popup by clicking outside of its area, a window is closed.
Depending on the platform specific implementation details, this can
result in multiple calls to QWidgetPrivate::setVisible(false). The first
one from the handling of the close event in QWidgetWindow::event; the
second from the destruction of the window in QWindow::event.
Since the first call already sets the Qt::WA_WState_Hidden flag before
calling QWidgetPrivate::hide_helper, we can test if the flag is set
and skip the second call if it is.
The included test does not reproduce the issue, as that issue only
reproduces if the close event is generated by the mouse event handling
in the Cocoa platform plugin (which doesn't call QWidget::close, but
rather sends a native close event to the platform window). However, it
verifies that the fix doesn't introduce any regressions.
Change-Id: Id0eda9326a8adf0cc1f6a3840f9ac0b635ab39a1
Fixes: QTBUG-79134
Pick-to: 5.15
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the declaration, leave them in as comments so that the gaps in the
numbering of the values doesn't create confusion.
Change-Id: I92ff299416896c471e7c7d80b988cd4642b6b756
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Addresses FIXME comment in qwidget.cpp, where the operator is being
used.
Add documentation, make constexpr and add noexcept as for the other
operators.
As a drive-by, remove invalid const from return type in the
documentation of the other operators. They all return a non-const
QMargins object.
Change-Id: I5a9ca82978d38acd02e03ec00ca202fe1b8cf6c1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The code for doing that existed in the QListWidget::dropEvent override,
and was only using standard itemview APIs to adjust the selection model.
There is no reason why dropping items internally in a QListView
should not do the exact same thing.
As part of moving the code from QListWidget to QListView, replace QList
with QVector, and other minor optimizations.
[ChangeLog][QtWidgets][QListView] Moving selected items within a list
view by drag'n'drop will maintain the selection of those items.
Change-Id: Ie24bec38234839dcb2f0b0ee0302cc59ca101631
Fixes: QTBUG-83084
Pick-to: 5.15
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Now that the standard gives us proper types for UTF-16 and UTF-32
characters, use them. Will eventually make the code much easier to
read than today, where uint could be an index as well as a char32_t.
It also ensures that the result of e.g. QChar::highSurrogate() can
still be implicitly converted to a QChar now that the
QChar(non-characater-integral-types) ctors are being made explicit.
[ChangeLog][QtCore][QChar] All low-level functions
(e.g. highSurrogate()) now take and return char16_t instead of ushort
and char32_t instead of uint.
Change-Id: I9cd8ebf6fb998fe1075dae96c7c4484a057f0b91
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
[ChangeLog][QtCore][QString] Now supports appending, prepending
and inserting QStringViews.
Change-Id: I7538c050c67590f27d91443eda0b94a4b80b62f2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add some more details to make it a bit easier for advanced users
to grasp what this is about.
Task-number: QTBUG-80257
Pick-to: 5.15
Change-Id: I9969b5b62384a25d5e90b57ef25c83a8a2a6c9c7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Rather than have a fontChanged() signal which can be connected to for
tracking when the application font has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated fontChanged() signal in
favor of QEvent::ApplicationFontChanged.
Change-Id: Iae8e832238fc85e385a52305bc04f16e597454b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The SAX API in in Qt XML got deprecated, and examples using it
removed in commit 82d02b7b95.
Pick-to: 5.15
Change-Id: I39b71378c0f797e82431c8a0e12255626ed145ed
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This patch allows all the sqldrivers to be built as a standalone project.
It is not possible to build each plugin separately due to the configuration
features definition being located in the sqldriver's folder CMakeLists.txt.
In other words, the project needs to be generated from the
src/plugins/sqldrivers/CMakeLists.txt file.
Fixes: QTBUG-82962
Change-Id: If41c7e3827589391830a894a9c998d2e56239562
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Without this behavior enabled by default it is currently not possible to
build QtVirtualKeyboard as a static build. We run into the error where
cmake is trying to promote the targets to be global due the XCB library
already being found by one of the modules in QtBase.
In case we wish to disable this fix, any module can simply specify
QT_FIND_PACKAGE_DISABLE_DEBUG_BEHAVIOR=ON during configuration time.
Change-Id: Id7f2ad12ddea941dda754361660c7606439cd5a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Added asserts to insure the invariant declared in the documentation.
Canceled future object is not valid, hence we don't need to handle
this case separately.
Fixes: QTBUG-83389
Change-Id: Ib0653ef40cd3135574a91740e4ce2c6dc4da8a71
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This follows up on commits 3e7463411e and
947883141d.
The changing of the pointer of QApplicationPrivate does not transfer
focus properly. It updates the pointer, but it doesn't deliver events
or update the widget hierarchy's focus chain. The result is that
multiple line edits might show a blinking cursor.
Instead, use QWidget::setFocus when the focus proxy has changed while
it had focus, and pass OtherFocusReason rather than NoFocusReason.
Add a basic test for QWidget::focusProxy, which exercises this code
path and verifies that pointers are consistent when focus changes as
a side effect of modifying the focusProxy.
Change-Id: I15a4d868bab2b590cfe4a1daa6a3c8cebc9c9ca2
Fixes: QTBUG-83720
Fixes: QTBUG-79707
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
It previously applied to dates and date-times, but was documented as
applying to times (and date-times then included it by reference).
It's only meaningful for a date-time.
Change-Id: Id9e8e8cb987b03e5ddc77b05c581b9b6944065fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code got a QMap serialized as a QString and parsed it to
re-create the same map.
Just copy the map.
Change-Id: Ic71b9fa9d822eab53fe37dfb4d76223cd69ac057
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Simply rename the function in order to not clash with aligned_alloc()
that is marked as 10.15 only (and thus would need annotation etc.) in
the 10.15 SDK. (note that aligned_alloc is a C11 function which was
presumably not present in earlier SDKs, by renaming our own version
everyone will be happy, hopefully)
Change-Id: Iee400d81df6a0af4fa2129358ed27b049720685b
Pick-to: 5.15
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Also extend autotesting, both for rendering into a given mip level
and for rendering into a given cubemap face.
Change-Id: Ida94b71150477ceb50a3b5616d8b7be13174558b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This feature is Windows-only and must be turned on manually.
For MSVC it sets the MSVC_RUNTIME_LIBRARY target property.
For MinGW it adds the -static linker flag.
Change-Id: I9da3b88d545b34bc34a3a80301b2dd1b5986fa88
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The last release of glibc 1 was 1995 and can be considered outdated.
Also, the current check prevented building with e.g. musl libc.
Every file that includes common/posix/qplatformdefs.h already has
QT_SOCKLEN_T defined to socklen_t, so remove the definition from those
completely.
This is a continuation of 813f468a and a421e409.
Change-Id: Icf2692a8e814286487662e290a8f844872eefe53
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a .vscode line in the .gitignore file to ignore the Visual Studio Code auto generated files.
Add a .vscode line in the .gitignore file to ignore the Visual Studio Code auto generated files.
Change-Id: Ifbcf82a9c23b4ecf35ae9fd84787f7e1e29df47b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Comparing the layer contents to the backingstore surface doesn't make
sense when we're single buffered since we're always using the same
surface.
And once Core Animation has picked up on the surface it's not enough to
just keep drawing to it, we also need to tell Core Animation that the
contents has changed.
Change-Id: I517a0b7a3ba7e9d96033465c9bd5a192985643ac
Fixes: QTBUG-81071
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Qt assumes that ascent+descent is the bounding height of the
text, but for historical reasons, the ascent for some fonts
will not contain the diacritics. On Windows, the preference
is to use data from the OS/2 table which were explicitly
invented to work around this, but on other platforms we
are not respecting this table. This causes a text layout
that looks fine on Windows to have overlapping characters
on e.g. macOS.
To make vertical metrics (ascent, descent, leading) consistent
across all platforms, we don't blindly trust the values we get
from the underlying font system, but apply in the following order:
1. If OS/2 table exists and USE_TYPO_METRICS flag is set, we
use the typo metrics from OS/2 table
2. If OS/2 table exists and USE_TYPO_METRICS flag is not set,
we use winAscent/winDescent from OS/2 and the line gap from
HHEA table.
3. If no OS/2 table exists, we try to get ascent, descent and
line gap from the HHEA table.
4. If the HHEA table does not exist (not an SFNT), we fall back
to the system-provided metrics. (on macOS, we know the
system-provided metrics will match the data in HHEA, so we
skip parsing that table and use the data from CoreText if
there is no OS/2 table).
Task-number: QTBUG-80554
Change-Id: I41e6561a99513698c8e42451b4ec98bd5eb6892f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When changing scaling from 100%, at which High DPI scaling is inactive,
to something larger, High DPI scaling does not become active.
Update the factors when screens are refreshed.
Pick-to: 5.15
Task-number: QTBUG-77302
Task-number: QTBUG-77136
Task-number: QTBUG-82267
Change-Id: Iebbc29ced2f23af9db4d67839458848245e2db1d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a date-time was parsed from a string, the result was equal (as a
date-time) to the correct value, but had (at least in some cases) the
wrong spec, where it should have had a spec reflecting the zone
specifier parsed.
The time-spec imposed for the benefit of QDateTimeEdit is now moved
from QDateTimeParser to QDateTimeEditPrivate, which takes over
responsibility for imposing it. QDateTimeParser assumes Qt::LocalTime
in member functions (where applicable) and uses the time-spec parsed
from the string when constructing the date-time.
QDateTime::fromString() and QLocale::toDateTime() are updated to
use the full QDateTime returned by QDateTimeParser.
Fixes: QTBUG-83075
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I8b79add2c7fc13a200e1252d48dbfa70b36757bf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Due to the bug related to the 'new syntax' signal/slot connections,
it's unfortunately possible to have a connection not deleted properly
by the moment children objects get deleted. Then, as a result,
in e.g. QSslSocket's destructor the socket will change its state,
triggering the (now deleted) UI elements' access.
Note - the original bug was reported, the patch (only possible?) was
not accepted.
Fixes: QTBUG-83659
Change-Id: I2965532485bcd46f93f8449e4d0a30da92b572c5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit 3a6d8df521.
That change is only for 5.14.
Conflicts:
src/plugins/platforms/wasm/qwasmeventtranslator.cpp
src/plugins/platforms/wasm/qwasmintegration.cpp
src/plugins/platforms/wasm/qwasmopenglcontext.cpp
src/plugins/platforms/wasm/qwasmscreen.cpp
Change-Id: Ib9151e199291fe6eb4151027b515393c05303d65
This patch adds a publicly callable qt6_add_plugin() API to create
plugins. This API is meant to cover cases such as the plugandpaint
example.
This patch also renames qt_add_plugin to qt_internal_add_plugin in order
to avoid clashes with the public API. To avoid breaking the existing
projects, a compatibility wrapper function is enabled by default unless
QT_DISABLE_QT_ADD_PLUGIN_COMPATIBILITY is specified.
Fixes: QTBUG-82961
Change-Id: If5b564a8406c90434f1bdad0b8df76d3e6626b5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Ensure they are handled as enumerations in QMetaType.
This is required for handling QFlag-type properties in Qt Designer
Fixes: QTBUG-83689
Change-Id: Ifbfb5c5b5cd34fce462e299505d063e22e725c2e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We remove the QT_NO_TOOLTIP check from qstandarditemmodel.h, because as
the 'tooltip' feature is in QtWidgets, we cannot use it properly in
QtGui. Also this affects just two non-virtual inline methods, i.e. it
has no effect on library size.
Task-number: QTBUG-82785
Change-Id: Ic166f14fb1cf3e9dd789573a6b9db6a87fb50e10
Reviewed-by: Tasuku Suzuki <tasuku.suzuki@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
qsocketnotifier.h:113:69: error: cannot initialize return object of type
'Qt::HANDLE' (aka 'void *') with an lvalue of type 'const
QSocketDescriptor::DescriptorType' (aka 'const int')
qsortfilterproxymodel.cpp:2938: error: out-of-line definition of
'recursiveFilteringEnabledChanged' does not match any declaration in
'QSortFilterProxyModel'
qline.cpp:376: (qdoc) warning: Cannot find 'QLineF::IntersectionType'
specified with '\enum' in any header file
Fixes: QTBUG-83676
Change-Id: I57b51f4ad15fdc50db88100ad5b1cb85ed394b7a
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
