Our tls certificate/key are a bit on the old side and need to be
updated. But for now let's lower the openssl level. In this case openssl
complains about the server's key used for DHE being too short.
Task-number: QTBUG-86187
Change-Id: I142a7d52f7599f60b8f4f3ff3ac5ce61fed06b4c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The old test harness used to spit out stderr only, but
to be on the safe side we spit out both.
Change-Id: Ib8e57fd1b0e4d8542ac552a6fe58c07016df7f5f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When cross-building Qt with CMake to target qemu configs in the CI,
we specify the -DQT_BUILD_TOOLS_WHEN_CROSSCOMPILING=ON option to also
cross-build tools (like qmake).
In this case, $prefix/bin/qmake points to the cross-compiled qmake,
and the shell script that wraps the host qmake is called
$prefix/bin/host-qmake instead.
In such a scenario, tst_qmake ends up running the cross-compiled
qmake, which thinks that it's being run on device (via user-space
qemu emulation) and doesn't specify the sysroot when computing include
paths, link paths, etc. This causes the test building to fail in
various ways.
To fix the test, check for the existence of the host-qmake wrapper,
and if it exsists use it instead.
Task-number: QTBUG-86053
Change-Id: Iaa4afdf11b17f23abef873dd15b1ed950126ab8c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The qdatetimeparser was not tested explicitly so far, but only
implicitly in tst_qdate / tst_qdatetime / tst_qdatetimeedit etc.
This made it difficult to test some corner cases, especially in the
context of unfinished dates, i.e. dates which are invalid, but could
become valid by adding more characters. This is used to validate
user input in qdatetimeedit.
Task-number: QTBUG-84334
Change-Id: I27202849abb1b7cad96d3e25f7ac81ce85272b2a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move it to the section requiring SSL tests since it
requires QSslConfiguration.
Change-Id: I5c807976ce75fa5967bddb8edd7788dbfbb89375
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* Rearrange the documention to match the enumeration order.
Fixes: QTBUG-87037
Change-Id: Iad001351e0f309e694b8bbd503813017e6586a21
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This mostly reverts change 76e8e8e9c8.
The reason is that storing non relocatable types inline in
QVariants storage would implicitly make QVariant non relocatable.
Fixes: QTBUG-87686
Change-Id: I2a09b1dcdd907d60085dccf17f987086dcba878c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Keep this in sync with the changes we have done in QTypeInfo.
Change-Id: Iaacb0f3cc5c46d3486084a1f6eca480a233d5e1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a almost trivial benchmark for QString::number(int).
Change-Id: Ice67eaf28e8d7b235fd5ec5e0b87b3b9053ae61e
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move the existing “kitchen sink” test out of the way,
and rename it to “kitchensink”
Change-Id: I121260e640bb2810a94f8112fcea212e97055fb3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QList::parameter_type is defined and used to give better
performance e.g. for arithmetic types. Let's use it consistently
in QList API instead of const T &
Change-Id: I2e12bd83f55679b55a14fbb23ab6172a9cf7bbcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
on Ubuntu 20.04
There is some issue with the glib event dispatcher.
Task-number: QTBUG-87728
Pick-to: 5.15
Change-Id: I4d64206898dd2c8356d5fc51a68c2e5759b38aac
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
RFC2822 requires times to be in the format 'HH:mm' or 'HH:mm:ss'.
We did not have unit tests to check that malformed RFC2822
dates are rejected. This patch adds such unit tests for
truncated hours/minutes/seconds.
Change-Id: Id5b9390112e633e617722439ad59439e6aeba841
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt Quick, when we deliver an item-specific QTouchEvent that contains
only the subset of eventpoints that are inside the Item's bounds,
traditionally the Item can accept the event to tell the delivery logic
that the event is handled and doesn't need to be delivered further.
But an Item cannot be expected to have total scene awareness; so now,
the delivery is "done" only when all eventpoints in the original event
are accepted. This behavior has been working well enough already due to
logic in QQuickWindow that iterates the points and accepts them if the
event is accepted; but it seems appropriate to move this enforcement
into QPointerEvent itself. Making setAccepted() virtual gives us a
useful degree of freedom.
Event-handling code should alternatively use QEventPoint:setAccepted()
or QPointerEvent::setExclusiveGrabber() to take resonsibility for only
a subset of the touchpoints.
Another way to put it is that we treat QPointerEvent::setAccepted() as a
convenience method: accepting the QEventPoints is what counts (at least
in Qt Quick).
Change-Id: Icec42dc980f407bb5116f5c0852c051a4521105a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We cannot rely on "QString a; a.insert(0, u'A');" to give
a.capacity() >= 3, this is clearly an implementation detail. Changed
the check to a meaningful one
Task-number: QTBUG-87416
Change-Id: I2e017c1292d360e32b85b903361027485c08ea74
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Index of the last visible tab was not updated, if a new tab was inserted
after the current tab and before the last tab.
When the new tab is inserted before the last visible tab, the index of
the last tab increments by one.
When the new tab is inserted after the last visible tab, then the newly
inserted tab becomes the last visible.
Fixes: QTBUG-86898
Change-Id: I2f4b7f705261ec35a5aa7b883ecdddba25f007b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extract checkPositions helper function to re-use in the new test.
Task-number: QTBUG-86898
Change-Id: I5c8241b5701cd8c8c3e21607c385217d4b75e728
Reviewed-by: Jordi Pujol Foyo <jordi@vikingsoftware.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Expose event would not be sent when window was resized
Fixes: QTBUG-69155
Pick-to: 5.15
Change-Id: I81bf2d54f830a0dabf15398e1f25b55ff7ff4479
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Failure to copy m_inputEvent and m_pointerEvent actually left them
uninitialized, and resulted in random behavior in Qt Quick when
Flickable clones a pointer event for later replay.
Remove the comment about copying events being a "bad idea" in Qt 4,
while we're at it. Copying became more common in Qt 5, and we
probably won't be able to stop doing it now.
Change-Id: I40b6ba5ad696e7aaafbeefbca86eca00cab40616
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike the 32-bit version, we can't go to a bigger integer type to do
the multiplication with. So instead accept looping. Both libstdc++ and
libc++ implement std::uniform_int_distribution this way anyway, but in a
far more complex way.
There is no looping if the "highest" is a power of two. The worst-case
scenario is when "highest" is one past a power of two (like 65). In that
case, we'll loop until the number is in range. Since all bits have equal
probability of being zero or one, there's a 50-50 chance that the most
significant useful bit will be set[*], in which case we'll need to loop
and we again get the same probability. So on average, we only need two
iterations to get an acceptable result.
[*] There's also a possibility that the other bits are such that the
number is still in range. For 65, we'd need the other 5 bits to be zero
(64 is a valid result), but the probability of that is only 1/2^5 =
3.125%. The bigger "highest" is, the closer we get to zero, so
approximate by saying that never happens and instead calculate that the
most significant useful bit is the controlling one.
[ChangeLog][QtCore][QRandomGenerator] Added 64-bit versions of the
bounded() functions. They are useful in conjunction with Qt 6's 64-bit
container sizes, so code that used to call bounded(list.size()) in Qt 5
will continue to compile and work in Qt 6.
Fixes: QTBUG-86318
Change-Id: I3eb349b832c14610895efffd16356927fe78fd02
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This saves duplicating them with its own flags.
Task-number: QTBUG-85700
Change-Id: I9e938322fd787282cfd9f941f83af8c0d76aaa9d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As requested by a ### Qt 6 comment. This then implied a few other
functions weren't constexpr, which broke some tests.
Task-number: QTBUG-85700
Change-Id: I6522a9b2d7a74e117442121400a1d7198d323967
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the factor() test, drop scale() which should be
covered already.
Change-Id: Id2079536a91c7e9f7199960bdf6b33489d0a6670
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Use the new screen config feature of the offscreen
platform plugin to run tests on virtual screen setup.
This has the benefit that we can auto-test the QHighDpiScaling
implementation (as well as its usage in QtGui) on any platform
with a fixed mock screen setup which does not rely on physical
screen configuration.
Test the following configurations:
- three screens: 96 DPI. (reference)
- three screens: 192 DPI
- three screens: mixed (high) DPI
Change-Id: I2fac889d896cf30ab2a79c306cee22177ad8f4ac
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This way we can actually modify the container. Previously the interface
was rather useless.
Change-Id: I278aae46999862ada115c9066a010d7de5cde4ff
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The high-level iterable interfaces should coerce the types of most
QVariants passed to the expected ones. To do this, move the type
coercion code into qvariant.{h|cpp} so that it is available to the
QVariantRef specializations.
The exception are variants passed to the find() functions of associative
iterables. Here, we should not coerce values we cannot convert to the
default-constructed keys. Instead we return end() in such cases.
Fixes: QTBUG-87687
Change-Id: I0bd4e5c4e4e270dd3bf36cb3fb115794828077f2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QString::toUpper() now insists we use its return, so the benchmark
won't compile unless we do so. Also document the helper macro used by
the tests, to explain why it's even there at all.
Change-Id: I830f121d92867bcd09277ecdeb1c764413b34fa6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The test macro's first three parameters were given a QLocale:: prefix
by the macro, but the last three weren't. Save uses of the macro the
need to repeat the prefix in all parameters, thereby making the test
cases easier to read. Also, we can compare enum values, rather than
casting them to int; and, when a test fails, reporting the enum name
is far more informative than reporting the integer that represents it.
Change-Id: Ib0360c51049333b4a00ea84e271c99db6724334f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This revealed that the test was always broken; it had simply never
actually been checked.
Done-with: Andreas Buhr <andreas.buhr@qt.io>
Change-Id: I85ac7ba30738fa3b41bf8440a059ee3fabb4726b
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Added some tests that trigger an assert without this check.
(Drive-by: renamed one QTime test to match its QDate(Time)? counterparts.)
Change-Id: I3d6767605fdcca13a9b4d43a32904f584eb57cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
This simplifies code that would otherwise need to use the setter and
getter in addition to the bindable.
Change-Id: Iec6510b4f578f5b223c63b3a0719257a0cf2463d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is useful in cases like error handling when you need to print the
name of the lock file.
Change-Id: Ife4901ed53ae81d19e68cce7f1c173ef3745d56f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We now require C++17 and thus C++11 features or standard headers
should no longer be conditional.
Change-Id: I6b72306e809f71ec77acf7ffb97e2ed2ccd96e9d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Silence the warning, and test event delivery in addition.
Change-Id: I59c49a2ac70ecd32429116b76643700a7ad5ce3e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These classes should not inherit from each other
anymore in Qt 6. The reason is that this makes
the 95% case of using a non-recursive mutex
much slower than it has to be.
This way, QMutex can now inline the fast path
and be pretty much as fast as QBasicMutex is
in Qt 5. They actually use the same code paths
now. The main difference is that QMutex allows
calling tryLock() with a timeout, which that
is not allowed for QBasicMutex.
[ChangeLog][QtCore][QMutex] QMutex does not support
recursive locking anymore. Use QRecursiveMutex for that
purpose. QRecursiveMutex does not inherit QMutex anymore
in Qt 6.
Change-Id: I10f9bab6269a9181a2e9f534fb72ce65bc76d989
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we're going to split QMutex and QRecursiveMutex into
separate classes, make sure QMutexLocker is prepared for that.
Change-Id: Id5e9a955d1db7c8ee663dd3811ad6448dad0aeae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The return value can be ignored here, so make intention clear.
Change-Id: I116869c47039b159db96f133b5850a2215873c2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test helpers are used both in the qtconcurrentmap tests and in the
qtconcurrentfilter tests. In the future, they should also be used
in generated tests. This patch moves the function out of the
qtconcurrentmap folder as it is not specific to 'map'.
Change-Id: Ie79a7ae3040a7eab7364a3aabf934158c7527b5a
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Tests the move semantics of QImage in Qt6.
Change-Id: Ia4d95f0b88ca7dde0daf85a0f53049b42b5be1a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
