Vcpkg detection is enabled by default, but we did not have a flag to
disable it, and it was not showing up in config.summary either. By
adding a -vcpkg flag, we get to use `-no-vcpkg` when necessary, as well
as adding an entry to config summary indicating whether vcpkg is in use
or not. Besides `-no-vcpkg`, one can pass `-DQT_USE_VCPKG=OFF` to cmake
command in order to disable the automatic vcpkg detection/integration.
[ChangeLog][configure] vcpkg detection, and integration can be disabled
by passing the -no-vcpkg flag to the configure command, or by passing
`-DQT_USE_VCPKG=OFF` to the cmake command.
Pick-to: 6.6
Change-Id: Ide8da70a7b473ec23995104d162356e75e6d1240
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If -unity-build-batch-size is not given, we default to CMake's default
which is 8. In QtSetup.cmake, we explicitly set the default to avoid
having it set to OFF in case it is missing, just to make sure that we
don't get any unintended behavior.
Task-number: QTBUG-109394
Change-Id: I19849e9baa507b64fb23847c740e20a7adc61b8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring a qtbase developer build, WARNINGS_ARE_ERRORS is
set to ON and -Werror flags are added to the PlatformInternal
targets. But the value of WARNINGS_ARE_ERRORS is not exported.
This means that CMake code can't make decisions based on that variable
when building other repos, and we now have such code with the new
syncqt.cpp in qt_internal_target_sync_headers.
Export the value of WARNINGS_ARE_ERRORS in
QtBuildInternalsExtra.cmake.in.
Fixes: QTBUG-108151
Change-Id: I5de2633fcb1f20fead7d436c201852424e726842
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
An approach of test batching (joining multiple tests into a single
binary) has been taken, due to long linking times/binary size on certain
platforms, including WASM. This change adds a new feature
'batch_test_support' in Qt testlib. Based on the value of the feature,
test batching may become enabled with the -batch-tests switch.
Batching works for every target added via qt_internal_add_test. When
first such target is being processed, a new combined target for all of
the future test sources is created under the name of 'test_batch'.
CMake attempts to merge the parameters of each of the tests, and some
basic checks are run for parameter differences that are impossible to
reconcile.
On the C++ level, convenience macros instantiating the tests are
redefined when batch_tests is on. The new, changed behavior triggered
by the changes in the macros registers the tests in a central test
registry, where they are available for execution based solely on their
test name. The test name is interoperable with the names CMake is aware
of, so CTest is able to run the tests one by one in the combined binary.
Task-number: QTBUG-105273
Change-Id: I2b6071d58be16979bd967eab2d405249f5a4e658
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Add an option to limit the number of tests for building and testing
Android multi-ABI configurations in CI. Currently only Core tests
supposed to run.
Change-Id: Ibb8a41d60d108259ef2675ec54bde2482f87c8b2
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Consider qtbase built with CMAKE_STAGING_PREFIX=/foo on Windows.
If /foo was moved to /bar, non-qtbase repositories did get a staging
prefix with drive letter assigned. This is undesirable when DESTDIR is
used on installation.
Change the implementation of qt_internal_new_prefix to remove the drive
letter from the "new prefix" if the "old prefix" did not have a drive
letter.
Change-Id: I6fb17e690b264920b0dd4204e3b3c30794c7e76e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If qtbase was configured with CMAKE_STAGING_PREFIX set to a path without
drive letter on Windows, we must ensure that this exact staging prefix
is propagated to non-qtbase repos.
We already had code that does this for CMAKE_INSTALL_PREFIX. But since
9a74d94ff5 we build our cross-built
packages with CMAKE_STAGING_PREFIX instead of CMAKE_INSTALL_PREFIX.
Move said code into a function and use it for CMAKE_STAGING_PREFIX too.
This fixes Android non-qtbase release libraries not being stripped in
our Windows Android packages.
This amends commit 037fd545c4.
Fixes: QTBUG-104827
Pick-to: 6.2 6.3 6.4
Change-Id: I909f7f39bd0ef7b559619b69f756c042d6c528b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
One might want to build qtbase in Release, but qtsvg or some test in
Debug mode. Before if qtbase was configured as Release, there was no
way to override that.
Now we try to detect whether a custom build type was specified to
qt-cmake / qt-configure-module / qt-cmake-standalone-test /
qt-internal-configure-tests
Note mixing won't work on Windows due to different C/C++ runtimes.
Also, now we don't force set a single build type when a multi config
generator is used as well as one opts out via the
QT_NO_FORCE_SET_CMAKE_BUILD_TYPE variable.
Pick-to: 6.2 6.3
Change-Id: I6dc4325087ff7f905ad677d87b0267e2f3e4693f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When qtbase is configured with CMAKE_STAGING_PREFIX set, then Qt modules
built against this qtbase should also get CMAKE_STAGING_PREFIX by
default. Like CMAKE_INSTALL_PREFIX in regular builds, this prefix will
be determined by the location of QtBuildInternalsExtra.cmake to support
building Qt modules against an installer-provided Qt.
CMAKE_INSTALL_PREFIX on the other hand must be exactly the value that
was provided when building qtbase.
If CMAKE_STAGING_PREFIX is specified by the user, honor it.
To opt out of automatically setting CMAKE_STAGING_PREFIX, set
QT_BUILD_INTERNALS_NO_FORCE_SET_STAGING_PREFIX to ON.
Remove the old code that was supposed to set CMAKE_STAGING_PREFIX.
Pick-to: 6.2 6.3
Fixes: QTBUG-99666
Change-Id: I20edef54c102ca9784fcdef0decf0bd83266ae11
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A top-level non-developer build is supposed to default to a prefix like
"/usr/local/Qt-6.3.0". That wasn't the case.
In QtSetup.cmake we check CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT,
set CMAKE_INSTALL_PREFIX and did the same thing later in
QtBuildInternalsExtra.cmake, with a different value. Make sure we run
the latter code only in per-repo builds.
Pick-to: 6.2
Fixes: QTBUG-98087
Change-Id: I4a1291dfd126aa11c21d69809f2cf7b075c98d2e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We default to configuring examples as separate ExternalProjects when
using a developer / non-prefix Qt build.
This ensures we test that the examples configure successfully without
the pollution of the main Qt build (e.g. already found packages).
One down-side of this is that a developer's IDE doesn't see these
example targets, unless each project is loaded into the IDE
separately. This is cumbersome to do when refactoring or renaming
code across multiple example projects.
Allow configuring the example projects as part of the main Qt build
by setting QT_BUILD_EXAMPLES_AS_EXTERNAL to FALSE when configuring Qt.
Save the value of the variable in QtBuildInternalsExtra.cmake.in
so it's propagated to leaf repositories as well.
Amends dab8f64b6d
Amends d97fd7af2b
Task-number: QTBUG-90820
Task-number: QTBUG-94608
Task-number: QTBUG-96232
Task-number: QTCREATORBUG-26168
Pick-to: 6.2
Change-Id: Ie1f724f74365b3a788b04c3fffe9eb2d0611dd50
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
So that those values are used when configuring other repos in a
per-repo build arrangement.
Pick-to: 6.2
Change-Id: I5ff86260116c52afc87d7fcd5cbd047fcb9dde22
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This change introduces new behavior to error out when configuring user
projects if the CMake version used is too old for Qt to work with.
The main motivator is the requirement of new CMake features to ensure
object libraries are placed in the proper place on the link line in
static builds.
The minimum CMake version is computed based on whether Qt was
configured as shared or static libraries.
At the moment the required versions for building and using Qt are the
same.
The minimum versions are defined in qtbase/.cmake.conf in the
following variables
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_BUILDING_QT_SHARED
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_BUILDING_QT_STATIC
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_USING_QT_SHARED
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_USING_QT_STATIC
Qt Packagers can disable the version check when configuring Qt
by setting
QT_FORCE_MIN_CMAKE_VERSION_FOR_BUILDING_QT and
QT_FORCE_MIN_CMAKE_VERSION_FOR_USING_QT.
In this case it is the packagers responsibility to ensure such a Qt
works correctly with the specified CMake version.
User projects can also set QT_FORCE_MIN_CMAKE_VERSION_FOR_USING_QT
to disable the version check. Then it's the project's developer
responsibility to ensure such a Qt works correctly.
No official support is provided for these cases.
Implementation notes.
The versions required to build Qt are stored in
QtBuildInternalsExtra.cmake
whereas the versions required to use Qt are stored in a new
QtConfigExtras.cmake.
Also the policy range variables stored in
QtBuildInternalsExtra.cmake are now regular variables instead of cache
variables, to properly allow overrides per-repository.
Some renaming of functions and variables was done for a bit more
clarity and easier grep-ability.
Pick-to: 6.2
Task-number: QTBUG-95018
Change-Id: I4279f2e10b6d3977319237ba21e2f4ed676aa48b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The option is called QT_CREATE_VERSIONED_HARD_LINK. By default, it
is set to ON. Users can set this option to OFF to disable versioned
hard link.
Pick-to: 6.1
Fixes: QTBUG-93636
Change-Id: I0ffa1ee1c6bae1950df332fcce3152a861b33db0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
file(REAL_PATH) was introduced in CMake 3.19.
Use get_file_name_component(... REALPATH) instead that is available in
older CMake versions.
This amends commit b226e99c71.
Pick-to: 6.1
Change-Id: Ibb28ef757228e1a1176ff70c3ec57b7ca751a636
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
On the CI system, we build qtbase with CMAKE_INSTALL_PREFIX set to a
path without a drive letter to support DESTDIR when installing.
Other Qt modules are built without CMAKE_INSTALL_PREFIX set. The
Qt6BuildInternals package provides a default value.
Since commit e6527e2f73 this default
prefix is calculated from the current installation location. This
default prefix however has a drive letter, breaking DESTDIR support.
Broken DESTDIR support in this case means for Android that file(INSTALL)
can properly install but stripping will silently fail.
We now compare the "real path" of the original prefix from qtbase and
the calculated prefix. When they're equal, we use the original
CMAKE_INSTALL_PREFIX.
Fixes: QTBUG-92890
Change-Id: I96fb0655e02c5c695722b7e01a32e209cbdea4cc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit 15b26935fca4ab14298abdcc70b3cb15b6cca195)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When building a module against an installer-provided Qt,
CMAKE_INSTALL_PREFIX would default to /home/qt/work/install, which is
the install prefix of our packaging machines.
Do not hard-code the install prefix in QtBuildInternalsExtra.cmake but
use the one that is calculated from the location of
QtBuildInternalsExtra.cmake.
Pick-to: 6.1
Fixes: QTBUG-90449
Fixes: QTBUG-91475
Change-Id: I39f214efb18796a89f00a171ef190c547bba5c0a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For consistency, apply the following renamings:
QT_NO_MAKE_EXAMPLES -> QT_BUILD_EXAMPLES_BY_DEFAULT
QT_NO_MAKE_TESTS -> QT_BUILD_TESTS_BY_DEFAULT
QT_NO_MAKE_TOOLS -> QT_BUILD_TOOLS_BY_DEFAULT
BUILD_EXAMPLES -> QT_BUILD_EXAMPLES
BUILD_TESTING -> QT_BUILD_TESTS
This should help to better convey the difference between "BUILD" and
"NO_MAKE".
To configure tests, but not to build them by default, pass the
following to CMake:
-DQT_BUILD_TESTS=ON -DQT_BUILD_TESTS_BY_DEFAULT=OFF
Analoguous for examples:
-DQT_BUILD_EXAMPLES=ON -DQT_BUILD_EXAMPLES_BY_DEFAULT=OFF
Tools can be excluded from the default build with:
-DBUILD_TOOLS_BY_DEFAULT=OFF
The variable BUILD_TESTING is still available and initialized with the
value of QT_BUILD_TESTS.
Pick-to: 6.0 6.0.0
Change-Id: Ie5f29dfbdca8bfa8d687981dfe8c19c0397ca080
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The prefix value must be surrounded by double quotes in case it
contains whitespace.
Change-Id: I393c57368d7a255f5042e363405071ef042afc18
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Due to the install prefix being changed for standalone tests,
the correct $qt_prefix/bin folder was not added to the PATH
environment variable when running tests.
Make sure to always include the the original qt install prefix,
even if a different install prefix is specified when configuring
standalone tests.
Amends 39090ea15c
Change-Id: I22aab732bb2bb679074a811d28d8209e1d535df3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This allows doing debug_and_release builds with Ninja on all
platforms.
The "Ninja Multi-Config generator" is available starting with CMake
3.17.
Desired configurations can be set via CMAKE_CONFIGURATION_TYPES.
Possible values: "Release, Debug, RelWithDebInfo, MinRelSize".
For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug".
The first configuration is the 'default' configuration which is
built when calling ninja with no arguments.
To build all targets of a certain configuration use "ninja all:Release"
or "ninja all:Debug".
To build all targets in all configurations use "ninja all:all".
Note that the first configuration influences which configuration of
tools will be used when building the libraries for all configurations.
In simple terms, when configured with
-DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc
is used by AUTOMOC.
When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release"
the debug version of moc is used by AUTOMOC.
Framework builds and Ninja Multi-Config don't currently work together
due to multiple bugs in CMake, which ends up generating an invalid ninja
file with duplicate rules. There are also issues with placement of the
debug artifacts.
This will be handled in a follow up patch after CMake is fixed.
Task-number: QTBUG-76899
Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
A developer can pass either -DQT_NO_MAKE_TESTS=ON or
-DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built
as part the default make target (when you write just make or ninja).
With ninja, tests and examples can be built separately one by one,
by typing
$ ninja tst_foo
or
$ ninja example_bar
Same can be done with the Makefile generator.
$ make tst_foo
All tests / examples can be built in one go by typing
$ ninja tests/all
or
$ ninja examples/all
With the Makefile generator unfortunately it's not as nice and is most
likely an implementation detail, but it can still be done by running
something like
$ make -f CMakeFiles/Makefile2 tests/all
or
$ make -f CMakeFiles/Makefile2 examples/all
Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As with qmake, you configure with or without -nomake tests -nomake
examples, and the choice is propagated to other repositories.
Do the same for CMake. It's still possible to opt out to build one
or the other by passing -DBUILD_TESTING=OFF -DBUILD_EXAMPLES=OFF
on the command line, which takes precedence over the value saved to
QtBuildInternalsExtra.
Change-Id: If0fbfa938d88309e7969c9bacc8d0bf86548bf5e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Export the architecture configuration variables from QtBase. There are
other modules that require access to this information in order to
enable certain features (e.g: qml_jit in QtDeclarative).
Change-Id: If2c7f29ccb1c0b0a0db3d78ad133a2a6be12b5ad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_SOURCE_TREE is a variable that is set in qtbase/.qmake.conf.
In qtbase, it's used throughout various
projects to find cpp sources when building standalone tests (among
other things).
Everything works fine with qmake, because even if qmake is invoked
on the tests subfolder, qmake searches up the source directory tree
until it finds a .qmake.conf file, and uses that.
When building qttools with qmake, the qdoc project expects
to have a QT_SOURCE_TREE value, but it's not actually set in the
qttools/.qmake.conf file, so the generated include paths that use
that value are incorrect. Curiously the build still succeeds.
Now in CMake land we replaced QT_SOURCE_TREE with
CMAKE_SOURCE_DIR, but that does not work properly when doing a
standalone tests build, because the project in that case is the
tests one, and not the qtbase one, so configuration fails in a
developer build when trying to configure some private tests.
So far I've found that only qtbase actively uses this value.
A temporary fix is to save the qtbase source directory into a
QT_SOURCE_TREE variable inside the generated
BuildInternalsExtra.cmake file.
The pro2cmake script is changed to handle presence of QT_SOURCE_TREE
in a qrc file path. This is handled by finding the location of a
.qmake.conf file starting from the project file absolute path.
This is needed to stop the script from crashing when handling
the mimedatabase test projects for example.
The change also regenerates the relevant failing test projects, and
thus standalone tests (when doing developer builds aka private_tests
enabled) now configure and build successfully.
Change-Id: I15adc6f4ab6e3056c43ed850196204e2229c4d98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QT_WILL_INSTALL was previously always set to ON when doing a
qtdeclarative build, because
CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT evaluated to false due to
always having to set CMAKE_INSTALL_PREFIX to point to the qtbase build
directory.
Instead of recomputing the value of QT_WILL_INSTALL, compute it once
while configuring qtbase, and add it to the generated
QtBuildInternalsExtra.cmake file, so it propagates to all other repos
that will be built.
Change-Id: If8bf63e7501b5758fe7aa0f799cb0746704f4811
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>