I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Other parts of tst_qudpsocket.cpp already did this check.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca545a03c9596a
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been known to be broken for a while. Now it works: you can bind
and you'll retain the port (and the file descriptor) for the connect
call. Incidentally, in fixing the binding for more than one IP for the
hostname (with event loop), this commit fixes the setSocketDescriptor
XFAIL.
[ChangeLog][QtNetwork] Fixed a bug that caused both QTcpSocket and
QUdpSocket to close the socket and lose any bound ports before
connecting. Now bind()/setSocketDescriptor() followed by connect() will
retain the original file descriptor.
Task-number: QTBUG-26538
Change-Id: I691caed7e8fd16a9cf687b5995afbf3006bf453a
Reviewed-by: Richard J. Moore <rich@kde.org>
QAbstractSocket::close() always calls QIODevice::close(), which resets
QIODevice's internal read buffer. So it makes no sense to make same calls
from disconnectFromHost(). This made the closeCalled private member
superfluous.
Change-Id: I4ec64e9711490e44e737763e4ed7fb41bffe2556
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The documentation says that QUdpSocket emits readyRead() only for one
datagram and that if you don't read it, the class will not emit again.
That should be implemented by disabling of the socket notifier once we
have the datagram already read, but was broken.
In turn, that breakage caused a live-lock of the event loop: since we
didn't disable the notifier nor read the pending datagram, the event
loop would fire every time for the same datagram.
The re-enabling of the notifier was already working.
Task-number: QTBUG-43857
Change-Id: Ic5d393bfd36e48a193fcffff13bb32ad390b5fe8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Linux gracefully allows us to do that and treat the v6 socket as if it
were v4. Other OS (notably OS X) aren't so forgiving.
Change-Id: I13dd3274be2a4b13e8b1eef93cbc2dd17b648f96
Reviewed-by: Richard J. Moore <rich@kde.org>
We want to use "localhost" if the server's address is "any", as some OS
can't send datagrams to "any" (e.g., OS X and FreeBSD).
Change-Id: I1004bc2282e7f930cdb7ed394aa9f4b5a1cfcf82
Reviewed-by: Richard J. Moore <rich@kde.org>
On my Mac Mini, port 5000 is in use, which means the broadcasting test
fails.
Change-Id: Ifb0883263e277f388342430349ea7315d42f324a
Reviewed-by: Richard J. Moore <rich@kde.org>
It was unconditional. Someone forgot to check for IPv6 support before
skipping IPv6 tests.
Change-Id: I7b11528ad02560f0db9defde3c64f76f48a6c1f8
Reviewed-by: Richard J. Moore <rich@kde.org>
QUdpSocket doesn't support binding to QHostAddress::Any and then joining
an IPv4 multicat group since QHostAddress::Any is really an IPv6 socket
with v6only = false. The test did check this case, but failed to ignore
the warning.
Change-Id: I62d782408319a6e566e0ff1a6081b706ac1f669c
Reviewed-by: Richard J. Moore <rich@kde.org>
With IPv6, you cannot bind to a multicast address. You need to bind to a
local address only. The previous tests either checked this or didn't
check the result of bind().
Change-Id: Ief70887d8988fc1bc4394cf6ff34b5d560e5748e
Reviewed-by: Richard J. Moore <rich@kde.org>
Sending 100*8 packets of each type of message is WAY overkill. That's a
stress test without limiting. My Linux system starts reporting EAGAIN on
the socket, so reduce the amount of data sent.
Change-Id: I153f44cf3b91d37526dac580b400114cc80b1769
Reviewed-by: Richard J. Moore <rich@kde.org>
IPv6 has no such thing, so don't try to bind to an IPv6 address to send
broadcasts (even though that works) and it's a poor idea to bind to IPv6
to receive broadcasts. Moreover, skip any IPv6 network addresses
(broadcast() is invalid).
Change-Id: I2829b042c000158565adfd92db682f37d67dacae
Reviewed-by: Richard J. Moore <rich@kde.org>
If you don't have /etc/lsb-release, you'd get
sh: line 0: [: =: unary operator expected
Change-Id: Idb5c79f799879e4d32cd640ef74fb388227f831e
Reviewed-by: Richard J. Moore <rich@kde.org>
It doesn't make sense because there is no command to ask the proxy
server to join a multicast group. At best, we could write a datagram via
proxy without joining, but we definitely can't receive.
Change-Id: Icc6b54572a053fb7821dfca1f4111f2046ff8686
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove an useless check which spontaneously allow direct reads from the
socket engine.
Change-Id: Ia3d2a572d6f1563d613fe2f00d0d6849df259827
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
... because it fails on the new network test server. The Socks5 tests
in QUdpSocket have already been disabled by commit
aa3eaf9d2e .
Task-number: QTBUG-35490
Change-Id: Ib062adb422ff6e5538f14d15a266d79c3bb53956
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
... because they are too unstable. We can check whether they are more
stable once the new network tests server is in place.
Task-number: QTBUG-38385
Change-Id: I5ced7cc1f89290812aa88f174a41965fd2ef7252
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Replacing old troll.no domain with qt-project.org domain. Using troll.no
doesn't work anymore.
Change-Id: Ic6fa71b044d1adbdc66c875b47bfdc256a2afc8e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise you get:
undefined reference to `vtable for QAbstractSocketEngine'
when -developer-build is not used.
Change-Id: I444140736a6bf736894dc12a20f6a4d48af2678e
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In a slot connected to readyRead, if the app detects that the
buffer size is too small and increases it, it expects that
readyRead() will be emitted again.
setReadBufferSize() doesn't re-enable the socket notifier when
calling from within readyRead, and readyRead itself was missing
the code to do it.
Change-Id: Ia00a3066ad3ba09d5cfae0716adc5691ae96c3fa
Done-with: Thiago
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... because they fail on the new test server. This commit can be
reverted once the Socks5 socket engine is fixed.
Task-number: QTBUG-35490
Change-Id: I85635d4b44d26168d40a56b7a121693297564f0f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The new test server image will not have a SMTP service installed, and
the network self test does not check for that either.
Change-Id: I1063777832148e184de4ddf21d9154364f644e1e
Reviewed-by: Richard J. Moore <rich@kde.org>
Functions normally found from <sys/socket.h> are available on VxWorks
from <sockLib.h> header.
Change-Id: I2263ec40ba9f37bc95755b633fb43d66ceb2777c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The one in tst_QLocalSocket::writeToClientAndDisconnect just needed
proper ordering: that's what waitForDisconnect is for. At the same time,
we need to make sure we get the same message from all three
implementations of QLocalSocket::waitForDisconnect (and without the
useless space at the end).
Change-Id: I21364263cf908df022df814a6a39fcb5783e84e6
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
