This test is broken in a couple of ways. A few one line fixes
combined into a single patch.
1. Linux is the only OS that does
abstract unix domain sockets by prepending a null as the first
character. Don't test this on non-Linux platforms and expect
it to pass.
2. Change QVERIFY2 to QCOMPARE so we can see why this
fails in CI but no on the local system. Use QCOMPARE
where possible.
Change-Id: Ic3d2cf9696730dc4d6589539fdfe8a48ccf28de5
Reviewed-by: Alex <alex.blasche@nokia.com>
Due to recent changes in the test it should now compile
and run properly. This re-enables the test.
Change-Id: I6c647d99fa1f1b1c53e006fef2865d6be08ec16c
Reviewed-by: Alex <alex.blasche@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
- Made test depend on subprogram
- added install of subprogram
Change-Id: Ib263e9e75ed3c900b52fb1c9b6d319e71d19bdbb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QNetworkAccessManager was ignoring the supplied credentials, although
webkit seems to support these urls at a higher level.
Following the behaviour of browsers:
We use supplied credentials if authentication is required.
We add supplied credentials to the authentication cache.
We emit authenticationRequired signal if the credentials were wrong.
We do not use previously cached credentials for that url
Synchronous http requests fail, if the credentials were wrong.
Task-number: QTBUG-18107
Change-Id: If46e8eab1511ba8a0f4bbe0d4efaabc4df0b8ab4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- made subdir test depend on echo
- remove SRCDIR and changed to use TESTDATA and QFINDTESTDATA
- added waitForFinish() to handle slow networks
- removed core module header from echo subprogram and replaced
with needed header only
- Added ipv6 skip to connectToIPV6Address() if not available
- Added check QT_BUILD_INTERNAL and skip tests if backend
not available
- Skip permission tests if run as root
- Removed win32 debug and release directory locations so that
application is in known location relative to test data
Change-Id: I58c3c2fca3cd2fee72fdb81d016bb4fd7fe08ac2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I30bf175c2c9044e1f8556260a032467ca0dfc09f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I1957ef287ba2f337b5e0b2c6245d872eacb6316f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QLocalServer could only listen to sockets it created.
Thi is not always possible as sockets may be passed
by socketpair() or have to be created locally by
other means. This adds a similar feature to QLocalSocket
where a native descriptor maybe used.
Change-Id: I43b0af179b3b868dd164d4e1fd312ff4546cf9ff
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Tapani Mikola <tapani.mikola@nokia.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
An old coding error meant that the C runtime abort() function was
being called instead of QFtp::abort() when cancelling an FTP download
using QNetworkReply::close()
Task-number: QTBUG-22820
Change-Id: Ib97fda9769b2b55a08c042c66c4444cb6216d2b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Marked two tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qnetworkreply
- tst_qsslsocket
Task-number: QTBUG-24203
Change-Id: I9647833bf15fe5a340d7ef59e1dcb007a92677dc
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QNetworkReply finished signal does not have a bool parameter.
Change-Id: I87bd0410545f7a2fc2ab63cca90548f0585bf7a0
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
This file was removed in commit ba9302b8a9.
Commit 8fad23f326 removed openssl.pri from
src/network/ssl/ssl.pri, but not from the qsslsocket autotest.
Change-Id: Ic1a576ee7f0ee3d68471121ba636b94ce7bae455
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Always use <qt_windows.h> as the last file to be included.
- Remove it from some headers, use Qt::HANDLE instead of HANDLE.
- Clean up #ifdef, use Q_OS_WIN for Windows/Windows CE.
- Add NOMINMAX to qt_windows.h to avoid problems with the
min/max macros.
- Remove <windows.h> from qplatformdefs.h (VS2005)
Change-Id: Ic44e2cb3eafce38e1ad645c3bf85745439398e50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Open the comparison file as text mode, so that it does not differ from
the dumped certificate in CRLF vs LF line endings.
Change-Id: I54d6ea6e37044059e89e762435657ebf5fa6cb39
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been broken for months, but invisible because the code causing
the link error is unreachable (due to QSKIP). So the link error only
occurs in debug builds with -O0.
Change-Id: I6093a7803bedf37bfc8c2d9ff0b28b2309b57959
Reviewed-by: Richard J. Moore <rich@kde.org>
The QDnsLookup class provides asynchronous APIs for performing
DNS lookups. For now, the following lookups are supported:
- A and AAAA
- CNAME as defined per RFC 1035
- MX as defined per RFC 1035
- NS as defined per RFC 1035
- PTR as defined per RFC 1035
- SRV as defined per RFC 2782
- TXT as defined per RFC 1035
Task-number: QTBUG-10481
Change-Id: I46c1741ec23615863eeca3a1231d5e3f8942495e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
pause and resume is currently only supported upon emitting the
QSslSocket::sslErrors() signal. The API was added in QAbstractSocket to
also support QAbstractSocket::proxyAuthenticationRequired() in the
future.
This is the first patch to support that feature on the socket level,
another patch will follow to support sslErrors() and
authenticationRequired() in QNetworkAccessManager / QNetworkReply.
Task-number: QTBUG-19032
Change-Id: Ide2918268590ab9a01454ab26cb7fdca3dc840ab
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
This test sometimes gives different results on consecutive runs, and is
therefore insignificant for the purpose of regression detection.
Task-number: QTBUG-23837
Change-Id: I8747972c5cb7952089c54cbd22e1660db551e2f5
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
QAuthenticator used it for the convinience of QHttpSocketEngine only.
QHttpSocketEngine has now been ported to use QHttpNetworkReply to parse
HTTP responses.
Change-Id: Idf6e70aa76613aad6e3d789d81ca1b4fd73575c2
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
It was added only to maintain source compatibility with Qt Mobility.
Change-Id: Iea8d40e401bd1f8d5115268e09b256eacca69ea0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Modified exceptions as most tests are now passing correctly. Three exceptions
still remain, two serverSideMode tests (ssl3-any, tls1.0-any) and a
verifyMode test.
Task-number: QTBUG-23575
Change-Id: I847e8c2e3484050b8d07ede9aec955c30f7ef5a1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test hardcodes IP address / hostname pairs to be used for forward
and reverse lookups.
The reverse DNS entry for 62.70.27.69 has recently disappeared. Replace
it with an IP / name pair which is (hopefully) much less likely to
disappear.
Change-Id: I03f589e1c0f4bde0b1a14e94b3c1047eeb81246e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QNetworkCookie doesn't need to know about QNetworkCookieJar and for
QNetworkCookieJar header a forward declared QNetworkCookie is enough.
Change-Id: I21145ce0f67a0a6bd68a46a5e757f82105cdf520
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
All references to QFtp in documentation have been removed, QFtp's
documentaiton was marked internal. The QFtp example was removed.
Task-number: QTBUG-23199
Change-Id: Ifff83cac069fb350e8ebeae63e605850e65c0c30
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Numerous failures in the qsslsocket autotest suite relating to
connections without using proxies. Some have been skipped due to
the number of failures, other more specific tests have been set
to expect a failure.
Task-number: QTBUG-23575
Change-Id: I35fccc65bcab303646617a57a33f5aa7f7a4323f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It was checked in a few places, but it didn't actually remove QTextStream,
so it was pretty useless.
Change-Id: I8eaf28893cd6c7acbe1c0b69d58de90742aee755
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Introduce QTRY_VERIFY_WITH_TIMEOUT and QTRY_COMPARE_WITH_TIMEOUT
to be able to specify a timeout value.
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: Iaeaa4938eb14f2c431537055f626510cba183ce3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The custom QTRY_VERIFY macro is needed since the one provided by testlib does
not support custom timeout.
Change-Id: I12bbc5efcb16c4f53514ad738d6115d217a55b05
Reviewed-by: Alex <alex.blasche@nokia.com>
It's only used by Maemo and Harmattan, thus not needed in Qt5.
Change-Id: I8638f4fc63637be88d1aa584cde7e3a4116f2de6
Reviewed-by: Alex <alex.blasche@nokia.com>
QHttpNetworkReply crashed in Qt4.7 and 4.8 if a HTTP server responded with
gzip-encoded empty content without defining Content-Length in the response
header. This commit adds the test for the problem as a regression test to
Qt5.
Change-Id: Iddfb970a31d92a66fd1dd524811cf54bb06e5157
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Windows x64 uses 64 bits integer for sockets, to ensure compatibility we
should use ptr sized integers for our socket descriptors.
Task-number: QTBUG-19004
Change-Id: I4b56023874a4f1bad107c66c054fecfedde33d88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: If36b1b8f69c3509128786fec67899ae18ffaa2bc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This testcase fails on the Ubuntu 11.10 x64 platform, add flag to .pro
file so test is ignored on this platform.
Task-number: QTBUG-23380
Change-Id: I51831df8c8e9bfcf63d3689e37552ca1a62691cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The data file named "trolltech" has nothing specific to Trolltech in its
contents. Rename it to "testhtml". The lack of a file extension is
intentional.
Task-number: QTBUG-19653
Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a regression caused by the NTLMv2 authentication patch.
I have manually tested NTLMv2 authentication against MS IIS and reverting
these two lines does not break it.
Task-number: QT-5209
Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Test the authentication cache works properly with "cancelled dialogs"
or if the user enters username/password incorrectly.
Expected behaviour is based on web browsers:
If cancelled, current request fails, and prompt again the next time.
If wrong password is given, prompt again and retry the current request.
If bad credentials are in the cache, prompt again
Task-number: QTBUG-22875
Change-Id: Ic02ccac8dbeb3f2580ca4ffe47d0773982c4ab25
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The "happy eyeballs" connection code means that IPv4 and IPv6 connections
are both attempted for a http request.
For a normal http server, this is no problem, but the MiniHttpServer in
the test code is very simplistic and cannot cope with more than one
client connected at the same time.
On windows this causes all these tests to fail with timeouts.
Changed the MiniHttpServer to listen on IPv4 only instead of Any address.
Change-Id: I81e249997d894d266001da474a351b1f5642599e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMessageBox was being used to test nested event loops. This has been
changed to use QEventLoop directly.
Also, there was an unnecessary use of QPushButton to trigger a test
case, which has been removed.
As a result, 3 test cases can be run on VXWORKS, and one more test case
on Windows that were previously skipped.
Change-Id: Ic65ed441cd37d242f89df3ef3b8638a1458d9cf3
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
tst_QTcpSocket::disconnectWhileLookingUp required the host lookup +
connect + disconnect procedure to complete in <50ms, which is not always
true.
When disconnecting (rather than aborting with close()), wait for the
disconnection to complete with a timeout of 5 seconds.
Task-number: QTBUG-21043
Change-Id: I3b59abf9a8eb2c6d99416e1a8ec6b528885b656e
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
setSocketDescriptor fails because socket is in the wrong state.
This is timing dependent, if qt-test-server is still in the DNS cache
then the test failed.
- clear the DNS cache to avoid the host lookup state being skipped.
Change-Id: If159d514b1aa9b62a4834f6352d5e7b0a00a5724
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The docs say this is required, but we don't check it and instead
segfault right now.
Change-Id: I825b00a312a481c5383af127333c0c4698188348
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
bind() test failed if there is an autoconfigured IPv4 address.
e.g. bluetooth adaptor that is not attached to a network.
Or WLAN adaptor in peer-peer mode.
- solved by skipping the autoconfigured IPv4 addresses in the same way
as IPv6 addresses are already skipped
bind() test fails for proxy
- skipped, QTBUG-22964 created
Change-Id: I9a799ae8db421783f474e97cf876d6e265516397
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When listening on QHostAddress::Any, serverAddress() should return
QHostAddress::Any too, assuming that setting the socket options
was successful.
Task-number: QTBUG-22899
Change-Id: I50a9ff1b4ad0c1c1905e2952c595d7068df2627d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHostAddress(QHostAddress::Any) was not equal to QHostAddress::Any
because only one of the operator== overloads was handling this.
Task-number: QTBUG-22898
Change-Id: Ifd36947a50e8c36362b4e850fd8d5105ee0925ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Centralise the specification of the default ssloptions to make the code
clearer and more testable.
Change-Id: I4f4bae72736dd063ee4cd64c6375e82d0600a105
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Cast enum to int so that we get the actual and expected values in the
failure message, rather than merely "Compared values are not the same".
Change-Id: Idc20e050c2e8a07d70f839c0a45044b070c0900e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
SSLv2 may be disabled in openssl at compile time.
If so, do not attempt to test it.
Change-Id: I189c8fde5b5dc8e739d54cc1adde1d3e3e217391
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The handling of QSslOptions is complicated not only by the subject, but
also by the fact that some of the openssl directives are negatives. This
commit tries to separate the inherent complexity from the complexity of
the api by allowing us to test them independently.
Change-Id: Ieb9386c69dd9b0b49dc42e26b2878a301f26ded1
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This is a source-incompatible change.
TlsV1 is ambiguous; what is actually meant is TLS version 1.0. There are
also TLS versions 1.1 and 1.2; we might want to add options for these
once OpenSSL supports them (apparently they will be with OpenSSL version
1.0.1).
Change-Id: I940d020b181b5fa528788ef0c3c47e8ef873796a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt 4.x the serial number is reported by a mixture of the hex value
and the number, The hex is what is used by other tools, and we should do
the same.
Change-Id: Ia0361d43fb5b920d053c95e932e0c8a012436e5e
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Currently isValid wrongly gives the impression it checks a certificate
for validity - it doesn't. It merely checks if the certificate dates
are valid and if the certificate is blacklisted. Since it's already
easy for users to check the dates, let's just give them access to the
ability to check for blacklisting.
Change-Id: I25be3bde6a01063034702a9574b28469bf4882cd
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Two problems:
- The signal cacheCredidentials was not connected in the synchronous
case while it must be connected. (Regression when the threaded http
was merged)
- We cannot cache the credidentials when we proceed the url because
at that point, we do not know the realm (this basically reverts
9bc5a32b875b812c3a706034c8c27614f86bd138)
Task-number: QTBUG-18411
Change-Id: I8ea11fa23db4314c3f17ed06d2d7f9ee934ccdba
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Added tests for each of the supported extensions, and also for the
handling of unknown ones.
Change-Id: I29e0a5c1a411f41c2a554293662a33b56f205c00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit moves qsslsocket_onDemandCertificates_member and
qsslsocket_onDemandCertificates_static from tests/auto/ to
tests/auto/network/ssl/.
Change-Id: I1593e113016ce7bb7dffbee82f1196275784d0ac
Reviewed-by: Holger Ihrig <holger.ihrig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This should be API-compatible with Qt 4, but is not ABI-compatible, due to
removing the enum from QUdpSocket.
Task-number: QTBUG-121
Change-Id: I967968c6cb6f96d3ab1d6300eadd5bde6154b300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: Ie44b6ea8dd496857ea264f730148d3dc4f5c8324
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Fix typos I was able to find in `tests/auto' directory.
Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This commit re-enables tests that are assumed to be ok by now, since they:
- Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829).
- Did not have any known issues associated with them.
Note that not all of these tests were disabled as a result of QTBUG-21402.
Task-number: QTBUG-21402
Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Due to clearAccessCache being made part of the public API in Qt5,
this autotest can be run on normal Qt builds again
Task-number: QTBUG-17312
Change-Id: I3b70237a28ed141ffb49762cc40c8a528f9be6a8
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Several test functions use IPv6 reverse lookups, which evidently don't
work on HPUX 11i, but only one of these tests was skipped on that
platform and the others presumably fail.
This commit also removes the commented-out test data and makes it easier
to put some useful test data back. QTBUG-22287 records the fact that no
real IPv6 hostnames are currently used in the reverseLookup test.
Change-Id: Iff1ed1b725492bcc28ca4cb5f8e2dc106887c0b4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The standard IPv4 loopback address is 127.0.0.1, however anything in
the 127.0.0.0/8 range is also a loopback address.
isLoopback returns true for any address that is in the IPv4 loopback
address range, or is the single IPv6 loopback address ::1
Task-number: QTBUG-22246
Change-Id: Ic39100e2e97a52db700e01b109998a1cfd4335e3
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The DEPENDS_ON macro didn't do anything and has misled many users to
think that they can write test functions that depend on other test
functions.
Task-number: QTBUG-21851
Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The reference file has suffered whitespace changes during the cherry
pick from 4.8. Refetched from the test server.
Change-Id: I03a0b7a66cf6743de3391905422b2f4cdcd86dcf
Reviewed-on: http://codereview.qt-project.org/6454
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The platformsocketengine autotest uses the native socket engine directly
rather than through QAbstractSocket. The bind tests were failing because
the autotest was creating a socket with IPv4 (AF_INET) and then binding
with QHostAddress::Any (AF_INET6).
A linux kernel update caused this to start failing on the test machines.
Change-Id: Iea62f3d56dbfb35fcb952dcf00313578eb2bd764
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is in order to have a regression test for QT-5304.
However the test is also checking basic functionality of head
requests too.
Task-Number: QT-5304
Change-Id: I0d98bd1f1125ffd49d9f3c859a51b2aaee95379a
Reviewed-By: Martin Petersson
Reviewed-on: http://codereview.qt-project.org/6033
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
QTestLib already makes a superior version of this functionality
available to all tests, without the need to recompile. Each qtestlib
test program can be passed, via the command line, a list of test
functions and test data tags to be executed instead of executing all
test functions.
Change-Id: I1b54fc70a0c58a17209817afabfb953b5748dac4
Reviewed-on: http://codereview.qt-project.org/6015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a
Reviewed-on: http://codereview.qt-project.org/5941
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This change disables failing tests to increase the
likelihood that 'make check' terminates with a zero
exit status. This is done to prevent the CI system
from blocking further commits once qtbase#refactor
is merged into qtbase#master.
Failing tests are marked as insignificant (by putting
'CONFIG += insignificant_test' in the .pro file).
Note: This is a temporary measure that needs to be cleaned up
once the refactor->master integration is complete.
Ideally all disabled tests need to be enabled and passing.
All changes will be marked by the string QTBUG-21402 in a comment
for easy location.
Task-number: QTBUG-21402
Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d
Reviewed-on: http://codereview.qt-project.org/4678
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
