- Blacklist ioHttpRedirectPostPut for Windows
- Amend 84396a3f93:
Keys need to be on subsequent lines
Task-number: QTBUG-62583
Change-Id: I6360ec7bd87de65a3294a0d22148f13579fcd292
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Similar to the problem found in QTcpSocket auto-test recently.
While the failure on CI looks differently (apparently, server process
starts but does not print anything), fixing the dependency does not
hurt and at least fixes the 'make check' scenario.
Change-Id: I8f29f3e492d22410533407a527f5fc8f664e7f5c
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
While removing insignificant flag in commit
38a0909d4e and blacklisting
autotests that still failed, qtbase builds didn't
verify VS2017. That broke qt5 builds which do build VS2017.
Task-number: QTBUG-64264
Change-Id: I5fdfa5dac6192f449a05146a9a422e428a710c84
Reviewed-by: Liang Qi <liang.qi@qt.io>
Looks like I never even tested this. There were two problems:
1) when we asked for the recvmsg and sendmsg functions, we used the
wrong variable (socketDescriptor was still -1)
2) we extracted the destination addresses, but never set them in the
QIpPacketHeader object
The added tests confirm that this works on Windows, Linux, Darwin,
FreeBSD. There also seems to be a problem, obtaining the destination
address on an IPv4 socket with a dual-stack sender (I can reproduce that
on FreeBSD, macOS and Windows, plus an old version of Linux).
Task-number: QTBUG-63605
Change-Id: I638cf58bfa7b4e5fb386fffd14ea732bddbc0c42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This test fails often and seems to be flaky.
Task-number: QTBUG-62583
Change-Id: Id3af283c89e392634a7af6e11bd05775a4295798
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This test starts two processes - server and client - and requires
an external executable ('stressTest'). In .pro file we have SUBDIRS
containing both 'test' (test itself) and 'stressTest' (client/server app),
but there is no explicit dependency and as result we run the test before
we build 'stressTest' thus failing to start those processes. This patch makes
'test' dependent on 'stressTest'.
Task-number: QTBUG-36629
Change-Id: I286b08bcff86b9afc4bbee87a75e887527eaf5f2
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Neither the exit crash of QTBUG-21102 nor the Windows failure of
QTBUG-24226 appear to be reproduceable.
Add verbose error reporting to getErrors() and blacklist
getErrors:ftp-host which has been found to fail with timeouts
on Linux and ioHttpRedirectMultipartPost.
Task-number: QTBUG-21102
Task-number: QTBUG-24226
Task-number: QTBUG-62860
Change-Id: I6b29f6184e83de8ffebf6ff0d80606512dca6419
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It fails for me on Windows 10. Therefore, this is wrong.
FAIL! : tst_QHostInfo::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
S:\qt\qt5-msvc2017-x64\qtbase\tests\auto\network\kernel\qhostinfo\tst_qhostinfo.cpp(194) : failure location
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed5691472a4760
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Recently we have updated our receive window size to a larger value.
Unfortunately, this also results in auto-test pumping through
more data, which probably takes more time on CI.
At the moment we do not have any public API on QNAM's level to
customize HTTP/2 parameters (aka 5.10/FF and so on). So we use the fact
that QNAM is QObject and we can set a property on it. This property
is our Http2::ProtocolParameters object that allows us to configure:
- HPACK parameters (in 5.10 - noop)
- session receive window size
- different SETTINGS as described by RFC 7540, 6.5.2.
2. Undocumented environment variable to set ENABLE_PUSH is not needed
anymore.
3. In 5.11 Http2::ProtocolParameter will become a public API
and we'll introduce a new setter in QNAM.
Change-Id: If08fd5e09e7c0b61cf9700b426b60b5837b6b2e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
c4cf90b1f7 made POST requests be
redirected properly, but this wasn't enough and should have included
every method/verb.
Change-Id: I37b12dc9fdffcbf2aadbd2360d4fc2584c024939
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The path wouldn't match if the cookie's path was root ('/') and the
URLs path was empty.
Change-Id: I6dcd10f1fdf4f48f14e50f1b169cbdfda7005849
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][QHostAddress] Added isGlobal(), isLinkLocal(),
isSiteLocal(), isUniqueLocalUnicast(), and isBroadcast() classification
functions to complement isLoopback() and isMulticast().
Change-Id: I3868166e5efc45538544fffd14d8fca6e9042c04
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
All POST requests that were redirected would previously turn into GET
requests. This does not follow the standard for HTTP codes 307 and 308.
Task-number: QTBUG-63142
Change-Id: Ibd25a9566066e589670a9bc34e5dc5111f8139d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In some cases when a session isn't needed (i.e. for localhost), the
session is not opened at all. If a program (e.g. our tests) redirects
from localhost to a different system (e.g. the qt network test
servers, or the internet) it will wait for a session forever. So, we
need to check if a session is needed for the redirect-target and then
open one. It is usually opened in
QNetworkReplyHttpImplPrivate::_q_startOperation
Change-Id: Id3b78182a3fb3f63f0235ecb1fb665df8bd0c4ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We already cleared 'cookedHeaders', which is a QHash for 'known headers'
(enumerators as keys instead of strings), now do the same for 'rawHeaders'-
not to end up with some weird mix of headers from all possible redirect
responses and the final response.
Task-number: QTBUG-61300
Change-Id: Ifd6655c4167840bb00d29446d36ce65ba2d5491a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few tests would QSKIP depending on the inclusion of SSL, producing
multiple lines of noise in the output.
And one test used https in one of its configurations without checking to
see if it could, causing an UnknownProtocolError.
Change-Id: I5f54bf1005f962cc027c099b816fbe245dc43d3f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We were using the default ones, provided by RFC7540. It appears they are way
too restrictive and conservative: when downloading something relatively big,
a stream keeps spending the whole session/its own 'recv' windows and thus
we have to constantly send WINDOW_UPDATE frames. This significantly slows
down our HTTP/2 implementation, making it orders of magnitude slower than
HTTP/1.1. To fix this:
- We send SETTINGS_INITIAL_WINDOW_SIZE in the first SETTINGS frame
to inform our peer that per-stream WINDOW is bigger than 64Kb
- We increase the session's receive window size.
Task-number: QTBUG-63722
Change-Id: I31312fcfd5f0fc0aee6aaa5d3562cc7d1b931adc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... so that it comments the actual code, not what this code was before.
Change-Id: Ib191b9d7bd3ae3cda39a15f0f711cb1dd3c5c2b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
308 Permanent Redirect was introduced after redirection support was
initially added to Qt.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added support for HTTP status 308.
Task-number: QTBUG-63075
Change-Id: I1c6cda331d776237113ef8854de9abfe7e41ed3e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original test was using QSslSocket::waitForEncrypted function, which
is apparently a bad idea on Windows: connecting to 'www.qt.io' we have
to verify certs and there is no guarantee a given Windows VM has the required
CA certificate ready in its cert store. In such cases we start a background
thread (aka CA fetcher's thread) and it calls a (potentially blocking for
a significant amount of time) function (CryptoAPI). When finished, this
thread reports the results via queued connection, which does not work
if we are sitting in a tiny-loop inside waitForEncrypted. Re-factor
the test to use signals/slots and a normally running event loop.
Also, the last test makes a wrong assumption about Windows - fixed.
Task-number: QTBUG-63481
Change-Id: I4abe9cda2a6c52d841ac858cccb6bf068e550cb8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The comment was back-to-front on the meaning it needed to address; and
the #if-ery used a deprecated define, now changed to match what
sanity-bot asked for.
Change-Id: I0a971ab2e405e5908066da86964d67c8b852f114
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We don't need to bother the network test server with a TCP SYN packet.
All we need is for the local operating system to figure out the IP
address it would use to send a packet to the test server. We can do that
with QUdpSocket.
Also, the network test server hasn't been called "fluke.troll.no" for
almost a decade.
Change-Id: I209fcd5dbc2b4e5381cffffd14df65ccc7133247
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Looks like whoever created the blacklist never tried to figure out why
it happened.
Change-Id: I84e45059a888497fb55ffffd14d2fb29e32a4521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Teach our MiniHttpServer to better handle POST and PUT requests:
read the POST/PUT data too (not headers only), before replying
and flushing. The original comment says MiniHttpServer does
not support POST/PUT requests, it's not true anymore - we can
handle them (perhaps the simplest/shortest ones).
Task-number: QTBUG-62844
Change-Id: I80260f8ede1bb1b0b9d6042ecd59558bb7e9a998
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They aren't used in the API, so let's stop wasting library size.
Change-Id: I6e9274c1e7444ad48c81fffd14db247ecf825a57
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Without TLS (and thus ALPN/NPN negotiation) HTTP/2 requires
a protocol upgrade procedure, as described in RFC 7540, 3.2.
We start as HTTP/1.1 (and thus we create QHttpProtocolHandler first),
augmenting the headers we send with 'Upgrade: h2c'. In case
we receive HTTP/1.1 response with status code 101 ('Switching
Protocols'), we continue as HTTP/2 session, creating QHttp2ProtocolHandler
and pretending the first request we sent was HTTP/2 request
on a real HTTP/2 stream. If the first response is something different
from 101, we continue as HTTP/1.1. This change also required
auto-test update: our toy-server now has to respond to
the initial HTTP/1.1 request on a platform without ALPN/NPN.
As a bonus a subtle flakyness in 'goaway' auto-test went
away (well, it was fixed).
[ChangeLog][QtNetwork][HTTP/2] In case of clear text HTTP/2 we
now initiate a required protocol upgrade procedure instead of
'H2Direct' connection.
Task-number: QTBUG-61397
Change-Id: I573fa304fdaf661490159037dc47775d97c8ea5b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That means a file is never created, unless you ask for the name. There's
no chance of left-over temporary files being left behind. QSaveFile also
benefits from this, since the save file is not present on disk until
commit(). Unfortunately, QSaveFile must go through a temporary name
because linkat(2) cannot overwrite -- we need rename(2) for that (for
now).
[ChangeLog][Important Behavior Changes][QTemporaryFile] On Linux,
QTemporaryFile will attempt to create unnamed temporary files. If that
succeeds, open() will return true but exists() will be false. If you
call fileName() or any function that calls it, QTemporaryFile will give
the file a name, so most applications will not see a difference.
Change-Id: I1eba2b016de74620bfc8fffd14cc843e5b0919d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The only reason our code wants PKCS12 files is for a private key, but
a valid file needn't contain one; and reading a file without lead to a
crash in QSslKeyPrivate::fromEVP_PKEY(). So check for missing key and
fail the load, since the file is useless to us. Also ensure the
caller's pkey is initialized, as we aren't promised that
PKCS12_parse() will set it when there is no private key.
Add a test for this case (it crashes without the fix) and update the
instructions for how to generate test data to cover it also.
(Corrected the wording there, too; at the interactive prompt,
"providing no password" really provides an empty password.)
Task-number: QTBUG-62335
Change-Id: I617508b903f6d9dee40d539b7136b0be8bc2c747
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The test verifies that a cookie with a date in the future is not
"expired" and will be sent to the server. This test started failing
on August 7th 2017 when the test case "0003" with it's cookie expiring
August 7th 2017 started ... expiring ;-)
Bumped all suspicious cookie test cases by a hundred years.
Change-Id: I7c09069ec4999e2ea0aae7b2a2819cced0fd6a99
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The store is using QSettings under the hood. A user can enable/disable
storing HSTS policies (via QNAM's setter method) and we take care of
the rest - filling QHstsCache from the store, writing updated/observed
targets, removing expired policies.
Change-Id: I26e4a98761ddfe5005fedd18be56a6303fe7b35a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When ::WSAIoctl() reports 1 byte available for reading, we are trying
to peek an incoming datagram to ensure that the data is actually
delivered. But, according to MSDN docs, we are not allowed to pass NULL
as 'lpNumberOfBytesRecvd' parameter to ::WSARecvFrom() call, if
'lpOverlapped' parameter is also NULL.
The case with an empty datagram is fixed accordingly.
Change-Id: Id13038245332d3fb4bc18038d44a7cfd7ce04775
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The original test is quite unfortunate - it has cipher names hardcoded,
and it fails with OpenSSL 1.1 - no matching cipher found for 'RC4-SHA'
and QSslContext::initSsl fails with 'Invalid or empty cipher list'.
We skip this test entry for 1.1.
Change-Id: I810b80a62d9e27a60db71fd412af0c80630d976c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This hasn't done anything since at least Qt 5.0. It's possible it was
only used in Symbian, which we removed before the 5.0 release. This only
served to make the tst_QNetworkProxyFactory test slow.
[ChangeLog][QtNetwork][QNetworkProxy] The functions related to
QNetworkConfiguration are deprecated. They've performed no action since
Qt 5.0, so code using them can safely stop doing so.
Change-Id: I84e45059a888497fb55ffffd14d31b7c2978a04e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ASN UTCTime uses two characters to encode a year (YY). When converting it
into QDate, it's quite naive to just add 2000. According to RFC 2459,
these YY represent dates in the range [1950, 2049].
This patch also introduces a helper function doing the checked conversion
from a string to int (to be reused in the following-up patches).
Task-number: QTBUG-61934
Change-Id: I3f6f471d24e8357b83b2f5973023b2b842751389
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Several tests are not valid for 1.1 anymore:
1. SSL2 was removed, but there is no OPENSSL_NO_SSL2 and the 'protocolServerSide'
test is trying to use QSsl::SSLv2 and thus is failing.
2. We now use the generic TLS_server/client_method instead of version specific
methods we have in pre-1.1 back-end. So, for example, a client socket with
QSsl::TLS_V1_0 in its SSL configuration will be able to negotiate
TLS 1.2 if our server socket wants it, while with TLSv1_client_method
(OpenSSL < 1.1) our test was expecting SSL handshake to fail.
Change-Id: I18efd5921c79b189e4d9529be09299a361a8a81d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Print time in the error handler to get some diagnostics
about when the network connection is dropped.
Task-number: QTBUG-61673
Change-Id: I376bec81f52d75c9b601f2af9b7e0b63f5883bb0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use 15s instead of 10 (one check took 7.5s on my development machine, even).
Port to QTR_VERIFY_WITH_TIMEOUT instead of rolling our own waitForDone(),
as that reports (within limits) by how much the timeout was exceeded.
Change-Id: Id76a66d5f4fe3a4e814915add329eb4de3d264a7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Under qemu/kvm the systemProxyForQuery call - when initiated from a
secondary thread - never completes. Consequently the thread hangs, test
fails and the crashes due to the inability to cleanly terminate the test
thread.
Task-number: QTQAINFRA-1200
Change-Id: I9bd4ed163d215fadd8532a03bbdccd80fc8d9cb1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The test fails as sendmsg() on the socket trying to deliver a packet to
the IPv6 link-local fe80 address returns with -ENETDOWN. I cannot figure
out why this happens when RHEL 6.6 is run under qemu/kvm but not under
vmware. More details are in the task, but meanwhile the result of this
test is ignored.
This affects only RHEL 6.6, it passes on RHEL 7.2.
Change-Id: I4ade5cd249dd0d1901368ab571dad324e0fd10c2
Task-number: QTQAINFRA-1042
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
As QAbstractSocket::readData does and as the documentation of QIODevice says
"this function returns -1 in those cases (that is, reading on a closed
socket..."
Change-Id: I1e64673f6a6d792a640bd6cb28b2bb5a0f18dc36
Reviewed-by: Aleix Pol
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There were two more places that blacklisted certain interface types that
commit e579c822c5 didn't catch. This
commit adds those two.
Task-number: QTBUG-61263
Change-Id: Ia58d0480a9169f0f121aec03bf2e8900a58939cd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Adds a function to return the native socket descriptor. It allows
threaded or forked applications to reuse a previously created socket.
[ChangeLog][QtNetwork][QLocalServer] Added a function to retrieve
the socket descriptor.
Task-number: QTBUG-55043
Change-Id: I556e97000d2c02ad2bdd636984de6c7564381c6a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Packets sent to to link-local addresses on it are never received. We
don't know why this happens, as the tooling provided by Apple for
development is close to useless. So we just ignore this interface.
Task-number: QTBUG-61041
Change-Id: Ia608df1fff6bdee5238e107d8a50292a1f9e5c03
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Also mark as shared-come-qt6,
[ChangeLog][QtNetwork][QHostInfo] Added swap() and move operator.
Change-Id: I8f422868f0487a37aeba3bc74685dc4912e9b3a4
Coverity-Id: 168204
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the user calls QLocalSocket::setReadBufferSize() with a value less
than the current size of the pipe buffer, startAsyncRead() would call
ReadFileEx() with invalid parameters:
ReadFileEx(handle, nullptr, some_big_value, ...);
Change-Id: I3d153e3ec34f8038dc001c1c896aeceb666a8979
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 96c27f0dfa.
We now use a custom keychain that should fix the original
problem with the test.
Change-Id: I52e4105f34a46ad7080750d9a62480ebe3a56e68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The fix is outdated - the tests it was fixing - pass on 10.11.
Change-Id: I8b42c1d3d2f1279382b15c20587dcc93cf1b6b40
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If QEMU is provided sysroot with QEMU_LD_PREFIX, it opens files from there. If their
owner is the current user, testing their access rights based on assumption that they
are root fails. Skip the tests in that case similarly as is already done when the
tests are run as root.
This fixes following tests:
- tst_QTemporaryDir::nonWritableCurrentDir
- tst_QNetworkReply::getErrors(file-permissions)
- tst_qstandardpaths::testCustomRuntimeDirectory
Task-number: QTBUG-59966
Change-Id: I972ce37b4b5a7747cdd732a8e4a737ef09cbc6a5
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QEMU does not support all syscalls needed for tcp socket testing.
Skipped tests that can't pass on QEMU.
Task-number: QTBUG-59966
Change-Id: Ib6d12d0fc4c913a0222e13db57f0864b7fdf21ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Function if_indextoname fails on qemu because SIOCGIFNAME is not
supported. Expect failure if emulation is detected.
Change-Id: I53b41286d82458661e7fa723af385f323582ce7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mixing different protocols on client-server sockets works differently
on 10.11, making previously successful handshakes failing now.
Failure is specific to 10.11 with SecureTransport.
Change-Id: I35374b40fa3d167802775b526cf6465ae78749cf
Task-number: QTBUG-48860
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QEMU does not support all syscalls needed for udp socket testing.
Skipped tests that can't pass on QEMU.
Change-Id: I40882207a47cfafbc3becb3dff8e7cead9676255
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously we were always setting SpdyWasUsedAttribute for SPDY/HTTP/2/HTTP/1.1
(true/false) which is confusing. Now if HTTP2AllowedAttribute was set to true on
a request, we set HTTP2WasUsedAttribute. Otherwise, as we did before, we're setting
SpdyWasUsedAttribute.
Change-Id: I0c44cfb5469fef0c12719baa951197ee2accee4a
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
RFC6125 section 6.4.2 specify we need to convert the IDN to ascii
before comparison. Note that we don't need to toLower anymore
because toAce takes care of it.
Section 7.2 recommands that we dod not attempt to check for wildcard
character embedded within the A-labels or U-labels of an
internationalized domain name. So we reject names that contiains a
'*' but starts with 'xn--'.
Change-Id: Ib0830520a1f82bbf9fd11818718277a479527ee3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace outdated LGPL21 with LGPL license header.
Use GPL-EXCEPT for all autotests.
Also use canonical contact url.
Change-Id: I6e5cc8a4285569c4f862730a980f492b8a933a72
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After it started to fail (somehow it's only OpenSUSE 42.1) again and again
and after a quick re-evaluation it appears the logic testing SETTINGS|ACK
is incorrect. We (client side) start by sending the preface and then
continue to send our request(s). The other side (server) starts from sending its
SETTINGS frame. These settings must be ACKed, but apparently it can happen,
that server receives a requests and sends a reply before it receives SETTINGS|ACK,
resulting in replyFinished (replyFinishedWithError) signal and event loop stopping.
As a result - QVERIFY(serverGotSettingsACK) fails.
Task-number: QTBUG-58758
Change-Id: I8184cf459b2b88f70c646171e0115c184237fad1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Change-Id: I394766c75dbea4d89bf3d6b9c3f3c89530ac0749
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The equality operator was supplied, but this one was missing.
[ChangeLog][QtNetwork][QHostAddress] Added op!=(SpecialAddress, QHostAddress).
Change-Id: Iad9c55fa0ee7a8e97d5e4ea4be0605b8b74649d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Rewrite tcpSocketNonBlockingTest() and downloadBigFile() to use lambdas for
the slots. This allows for removing the related member variables and slots
of the test class and ensures no leaks of sockets or inconsistent values.
Add an error handler printing the error message to the flaky downloadBigFile()
test.
Change-Id: Ieb64063c41e045a1a50a6d074bef01753ee319ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
HTTP Strict Transport Security (HSTS) is a web security policy that
allows a web server to declare that user agents should only interact
with it using secure HTTPS connections. HSTS is described by RFC6797.
This patch introduces a new API in Network Access Manager to enable
this policy or disable it (default - STS is disabled).
We also implement QHstsCache which caches known HTTS hosts, does
host name lookup and domain name matching; QHstsHeaderParser to
parse HSTS headers with HSTS policies.
A new autotest added to test the caching, host name matching
and headers parsing.
[ChangeLog][QtNetwork] Added HTTP Strict Transport Security to QNAM
Task-number: QTPM-238
Change-Id: Iabb5920344bf204a0d3036284f0d60675c29315c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With this new policy, after emitting 'redirected', QNetworkReplyHttpImpl
waits for client code to decide if QNAM should follow this redirect or
not. The client can either allow this redirect by emitting 'redirectAllowed'
or abort the reply.
Task-number: QTPM-236
Change-Id: Ia04619f6bd1f0caa477833ae859b24033027b2e1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This commit simplifies defaultParameters() to simply construct an empty
QSslDiffieHellmanParameters and assigning the DER-form of the DH parameters
to QSslDiffieHellmanParametersPrivate's derData field.
This creates a valid QSslDiffieHellmanParameters instance, but skips any
potentially expensive verification steps.
The previous implementation of defaultParameters() would use the public
fromEncoded() method to construct an instance of the default parameters.
This triggers a verification of the passed-in data, which can be expensive.
To ensure our defaultParameters() QSslDiffieHellmanParameters instance does
pass verification, this commit adds an autotest to verify that.
Fixes QTBUG-57815.
Change-Id: I6b1d9dbbfde526b232c319195ddbad42326be27c
Task-number: QTBUG-57815
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch makes it possible to enable/disable redirects on QNAM
level (before it was per-request only). This policy would be applied
to all subsequent requests* created by QNAM.
The policies we support at the moment:
a. Manual - that's what we always had - it's up to a user to handle
redirects.
b. NoLessSafeRedirectsPolicy - we allow http->http, http->https and
https->https redirects, but no protocol 'downgrade' (no
https->http redirects).
c. SameOriginPolicy - we check that protocol/host/port are
the same.
Updated tst_qnetworkreply.
*We previously were enabling redirect for each request, by
setting FollowRedirectsAttribute on QNetworkRequest object.
For backward compatibility this attribute has a higher priority
(if set) than QNAM's policy (and it will work as NoLessSafeRedirectsPolicy).
[ChangeLog][QtNetwork] Added redirects policy to QNAM
Task-number: QTPM-239
Task-number: QTPM-237
Change-Id: I493d1728254b71b61b5504937e8e01dca5953527
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qHash(QHostAddress) was added in Qt 5.0 (at least the version with uint seed = 0).
op==(QHostAddress::SpecialAddress, QHostAddress) was there since QHostAddress was
added before public history. Since QHostAddress does not have a \since, the I did
not supply one for op==, either.
Since the equality operator did not have unit-tests, added one.
Change-Id: I954a0df02464338f08a12ca58d4cc0ceb013e67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Fix the case when we erroneously handled stream ID == 0 in a GOAWAY frame as
an invalid stream ID.
- _q_receivedReply: convert do{}while() loop into to while(){} to prevent
it from handling any frames after GOAWAY frame received and all active frame
finished.
- sendRequest - if we received GOAWAY, also clear spdyRequests in the connection
channel, otherwise it keeps re-trying to send requests!
- Http network connection channel never resets a protocolHandler in _q_encrypted/
_q_connected, which is BAD for HTTP/2, since HTTP/2 has unique per-connection
compression context and must be reset - now we recreate the protocol handler in
_q_encrypted or _q_connected (https/http).
- Update autotest.
Task-number: QTBUG-57600
Change-Id: Ib864ce52287bab23334ff43a83ba4b0b7cb52c60
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
May of the tests initiate a scan / update of the network configuration
and expect the API to deliver exactly one update. This turns out to be a
race condition as the update may be emitted multiple times, as
QNetworkConfigurationManagerPrivate::updateConfigurations() is called
via posted events (queued signal emissions) from the bearer thread, and
so after creating the spy we may receive an update from _before_ and end
up emitting the signal multiple times.
Task-number: QTQAINFRA-1040
Change-Id: I931e2907f0cb86d48b4ab1a8795d75206035ea11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... after a member-function declaration: this would be a compilation error
anywhere outside of a class-definition, allowed as 'opt' inside a class-definition
and essentially not needed at all (and is already different from other
member-functions we have in the same code).
Change-Id: Ia689a41bf2a1052cd19eb8fb4766ed9635c20c88
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QHostAddress allowed assignment from a QString, but the respective
constructor is explicit, and rightfully so. So it does not make
sense that the assignment operator is provided, because of the
asymmetry caused between
QHostAddress addr = funcReturningQString(); // ERROR
addr = funcReturningQString(); // OK (until now)
By the same token, since SpecialAddress is implicitly convertible
to QHostAddress, provide the missing assignment operator from that
enum.
Add tests, rewriting the _data() function to use the enum instead
of an int to pass SpecialAddress values, and to test !=, too.
Added setAddress(SpecialAddress), since a) it was missing and
b) to share code between the ctor and the assignment operator.
Change-Id: Ief64c493be13ada8c6968801d9ed083b267fa902
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qtcpsocket.cpp:606:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qtcpsocket.cpp:670:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qfile.cpp(2661): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
tst_qarraydata.cpp(760): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
main.cpp:40:33: warning: ignoring return value of 'char* fgets(char*, int, FILE*)', declared with attribute warn_unused_result [-Wunused-result]
Change-Id: I80ccef29b71af6a2c3d45a79aedaeb37f49bba72
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The aim of this patch is to allow the configuration of the connect
timeout used by QAbstractSocket that is currently hardcoded to 30
seconds.
Using QNetworkConfiguration for this allows to adapt the timeout per
network configuration (e.g. 2G vs wired lan)
[ChangeLog][QtNetwork] The connect timeout from QAbstractSocket
is now configurable through QNetworkConfiguration.
Change-Id: I1dc4051be2c74f925f7a9e0a9ccef332efc2e370
Reviewed-by: Lorn Potter <lorn.potter@canonical.com>
../tst_qfile.cpp: In member function 'void tst_QFile::handle()':
../tst_qfile.cpp:2661:38: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result]
tst_qstatictext.cpp:862:58: warning: unused parameter 'textItem' [-Wunused-parameter]
../tst_qtcpsocket.cpp: In member function 'void tst_QTcpSocket::abortiveClose()':
../tst_qtcpsocket.cpp:2254:90: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Test.cpp: In member function 'void My4Socket::read()':
Test.cpp:66:20: warning: 'reply' may be used uninitialized in this function [-Wmaybe-uninitialized]
../tst_qlocalsocket.cpp: In lambda function:
../tst_qlocalsocket.cpp:701:51: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
../tst_qtcpserver.cpp: In member function 'void tst_QTcpServer::linkLocal()':
../tst_qtcpserver.cpp:935:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
../tst_qtcpserver.cpp:940:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: Ic315069768bcb63a6b333c28ac65b0b992b0d43f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
HTTP/2 allows a server to pre-emptively send (or "push") responses (along
with corresponding "promised" requests) to a client in association with a
previous client-initiated request. This can be useful when the server
knows the client will need to have those responses available in order
to fully process the response to the original request.
Server push is semantically equivalent to a server responding to a request;
however, in this case, that request is also sent by the server, as a
PUSH_PROMISE frame.
The PUSH_PROMISE frame includes a header block that contains a complete set
of request header fields that the server attributes to the request.
After sending the PUSH_PROMISE frame, the server can begin delivering the
pushed response as a response on a server-initiated stream that uses the
promised stream identifier.
This patch:
- fixes the HPACK decompression of PUSH_PROMISE frames;
- allows a user to enable PUSH_PROMISE;
- processes and caches pushed data for promised streams;
- updates auto-test - emulates a simple PUSH_PROMISE
scenario.
Change-Id: Ic4850863a5e3895320baac3871a723fc091b4aca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There are more than 1000 new entries since the table has been
generated the last time. The autotest needs to be tweaked
because the rules for the .mz domains have changed; use the
.ck domain instead.
Change-Id: Ife692afd46ac41a66604e966e5e8cb57c7aa649c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this actually fixes the build when ssl is not enabled, as the openssl
features are in the not included network-private module.
Change-Id: Ibafae9867af493da184a45cf3981628d475d37a6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... and move toString() implementations there which were repeated in
network tests, or #ifdef'ed in qtest.h.
Since the functions moved from network tests are now in a public header,
had to massage them a bit to pass headersclean:
- replace Q_FOREACH with C++11 range-for
- avoid implicit conversion from QByteArray -> const char* (done by
re-using toString(QByteArray) instead of calling strdup() manually)
Also made the functions overloads instead of specializations. This
allows to pass the enum by value instead of by const-&.
Like the existing QHostAddress, the newly-added toString() overloads are
marked as \internal. We can decide later whether to turn them into
public API.
Change-Id: I8c23db7a0a6575273567017d42d7b2a957acece8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
1. QSslSocketBackendPrivate::transmit was ignoring 'readBufferMaxSize';
as a result, we can have a user trying to set read buffer's size
to a small value (and more important - reading slowly in a small
chunks from this socket), but SSL itself socket reading 'too fast',
potentially growing its internal buffer to a huge size. This also
results in auto-tests failing - whenever we're trying to limit read
rate in some test.
2. Update qsslsocket auto-test.
Task-number: QTBUG-43388
Task-number: QTBUG-55170
Change-Id: Iedece26df0ac5b3b7cad62cc8c98aedc28e7ca5b
Reviewed-by: Richard J. Moore <rich@kde.org>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Source (.cpp and .h) files should not be executable.
Change-Id: I021d8733185d73d071fcaf3df7e529862a490b63
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Debug code is suppressed; let someone investigating a problem be able
to turn it on/off by just editing one byte instead of each line of the
block of debug code.
Change-Id: Iba06df4042d9126d3a5d0873e524ef504c19d3de
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The (event) loop member spends most of its time NULL, so make sure
slots that dereference it can't trip up if called asynchronously when
it is.
Change-Id: If634df0ecf9650b52621bdb5a3e9f151abbc18fc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Restructure an if { if/else} else chain so that it reads more logically.
Change-Id: I0d9a68451147d2b7e6a6d01cf7bee1a64b9902a7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
If SSL was unavailable but requested (should never happen)
MiniHttpServer::incomingConnection() would have crashed on
dereferencing unset member client. Rework the run-time conditioning
on SSL to sit entirely inside the #if-ery on SSL support, so that
client is at least set in each code-path.
Change-Id: I9a8ee8e4186e16dd0d00b7f9cc9b988f0b4c62ff
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Moved a line of code that appeared after each call to setupSslServer()
into that function and replaced a copy of its code with a call to it.
Moved a line from the end of both branches of an if/else to after it.
Change-Id: I74ef3e643e41ce0279a6de7f4828baea4423f267
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Many struct, class and function bodies had their open braces on the
declaring line rather than on a line of their own. Split some lines
up and joined others in the course of resolving. Removed a stray
semicolon after a constructor body.
Change-Id: I492233ca8c499f13ebe4b7d63349382e5eaa1e19
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The whole point of this pattern is that the macro can be used with a
semi-colon after it and be a single statement; if it has a semicolon
in it, that makes it two (so, e.g., using it as the body of an if,
without braces, won't let you follow it with an else).
Change-Id: I57aca35898711ca24e10ddab73e075d361ef7eb8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
- port Q_FOREACH to C++11 range-for
- port use of inefficient QLists to QVector
- port from QSharedPointer to auto variables except where the
payload is returned from a function (there ported to
QSharedPointer::create())
Fixes errors pointed out by my tree's static checks.
In sslErrors(), fixed an unwanted double-detach problem by
adding a strategic qAsConst().
Change-Id: I8148e23b73337f6f1a721e009f2974536d8447cc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Introduce new entity: class Http2::Frame with accessors like
payloadSize/type/flags/streamID etc. (they actually read
/interpret raw bytes from a frame's buffer) instead of
duplicating this functionality in reader/writer classes.
Delete defaulted members and remove explicitly defined
move ctors/operators (not needed actually).
Update auto-test ('HTTP/2 server') to use these new classes.
Change-Id: Ie3516efbd095704e212142eef9e792323678ccfa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since headersFrame is a reference to a vector's element, clearing this
vector before accessing headersFrame.flags is not a good idea, must be
done later.
Change-Id: I80eee0761ac1cad580e979be9371ec7588a694ac
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Recently enabled cleartext fails to build with QT_NO_SSL - fix
test and QNAM.
Change-Id: I467edab8e4eb5113715ad2d3b3022e0d8c027de8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- add missing \since 5.8 on free functions
- fix \relates of qHash to point to QSslDHP, not QHash, which is in another module
- API fix: use named instead of unnamed ctors
- share code between ctors
- API fix: add inline move ctor (for now, this requires using a naked d pointer,
which isn't much of a problem, since the class is immutable).
Change-Id: Ic30f9c3c03b8a3798e0676e38991ead85c587214
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
HTTP/2 does not require TLS connection, it can work in a cleartext mode.
Plus at the moment only OpenSSL backend allows HTTP/2 negotiation
via ALPN/NPN (and none of our CI configurations with OpenSSL supports
these extensions, rendering HTTP/2 auto-test useless). This patch
implements cleartext HTTP/2 ('h2c') in 'direct' mode - this is
allowed if a client has a prior knowledge that HTTP/2 is supported by
a server.
Change-Id: I4978775e9732c40bc77f549b83bb4a5d1761887e
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The deleteLater() call wasn't reliably reached when tests fail,
so use a QScopedPointer with QScopedPointerDeleteLater deleter.
Change-Id: Ica73bc73c2a0ac1e9b77e4804f2aedcad9b662a0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead of 'true', it should be '-1'.
Change-Id: I5e8f99153da68d34b37477ef4cedbc447fba347f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
According to QLocalSocket's documentation, connectToServer() must
initiate a connection attempt after opening the device. Otherwise, if
a connection succeeds immediately, connected() signal will be emitted
on closed device. So, this patch ensures that TCP-based implementation
behaves correctly.
Change-Id: I4cc9474815e091a1491a429a6dc17f9cf0154f58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
In a TLS handshake the ephemeral server key is saved in the ssl
configuration. Clients who want to get the length or algorithm of the
key only get "Opaque" and "-1" as a result because the key is always
stored as "Opaque". This change converts the key to specific type so
more details are available and the client don't need to convert the
handle by hand.
Change-Id: I60f90fc2c1805e528640d391b20c676b6eeeb49e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
While connecting, the socket goes through the HostLookupState. In
this state, the socket engine is not yet created, unless the socket
had previously been bound. When it has been bound, we should keep
the socket engine even if the user initiates a delayed close by
using the write()+close() sequence.
Change-Id: Iefebcb33cd72cb49617acbac8e02af9d8209c869
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
QTRY_VERIFY seems to be a better solution.
Change-Id: I92f9d11c393d9a464716b9224da1fd9c2be956a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Add autotest for QHttp2ProtocolHandler. This patch contains a very simplistic
"in-process HTTP2 server" for testing the protocol's basic logic/flow control/error
handling and emulating possible scenarios.
Task-number: QTBUG-50956
Change-Id: Ie02d3329c5182277a3c7c84f1bae8d02308e945d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise socketDescriptor(), localPort(), localAddress(), peerPort(),
peerAddress(), and peerName() remain uncleared until close() is called.
This could take place when the connection is closed by the remote
endpoint or the user calls disconnectFromHost(). After disconnecting,
connection parameters are no longer valid, while I/O device is still
opened and may have pending data for reading. Usually, the user reads
all incoming data and closes the device independently.
Change-Id: Ic898851c39137faf64019949910f0d94ebb79df7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The file is read using CRLF line convention on Windows.
Task-number: QTBUG-24226
Change-Id: Ie08fa603e29c80a42de4bfbfd1f4237f53c22b98
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Test is strangely failing on Ubuntu 16.04 with OpenSSL 1.0.2g-fips.
Change-Id: I1498dee4c1d6db0702da3d3689787aed1e3a633f
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit adds a new class called QNetworkDatagram that encapsulates
the IP packet header and UDP/IP stack metadata along with the actual
payload data. It can be used for both receiving as well as sending data.
It's called QNetworkDatagram so it can be used by QSctpSocket too, when
that lands.
[ChangeLog][QtNetwork] Added QNetworkDatagram class, along with new
function receiveDatagram in QUdpSocket that returns it and an overload
to writeDatagram that can accept it.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca467f425ddc3d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
This is the second attempt to remove 'insignificant' from UDP socket test to:
- make changes ending up in regressions more difficult (hopefully impossible) to merge
- switch to BLACKLIST if needed
- make flaky tests more visible.
For now this 'back to significant' will be accompanied by extended BLACKLIST.
New in BLACKLIST:
* OS X - datagram size-related problems (fixed in 5.7)
* OS X - multicastLeaveAfterClose - will probably stay BLACKLISTED,
seems to be a Darwin's quirk, can be fixed in OS X >= 10.10.
* windows ...
tst_QUdpSocket::echo seems to fail randomly on OS X/linux and
it looks like it fails at the same time on different machines,
should be something server-related (a guess only).
Change-Id: Ib344348ffab03fab1b9309b80449a04d8ce247c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If a user's code, attached to sslErrors signal, calls abort/close
or disconnectFromHost but our SSL socket was configured not to verify a peer,
no need to continue handshake after calling checkSslErrors
(and finally crashing on invalid 'ssl' pointer).
Task-number: QTBUG-53906
Change-Id: I7f185511d278f9d6f16e7d6c5ba424707141459c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
