Nothing fancy, just a safety-net for a following refactoring.
Change-Id: I5be87c86cd61e24bf96881d2485dd7560ea6184a
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
A new define for better vectorized compositioning had a mistake that
caused some sources to be converted to grayscale when composited.
Added two 10 bit per channel formats to the lancelot test to catch
regressions in the future.
Change-Id: I1c468e6b93d68185e517fc0d44c6c927f9f7135f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Font style names are quite irregular and the simplistic matching
implemented in QFontDatabase::styleString(const QFont &) is unable to
properly resolve the style name when font is recreated from a string.
This causes the fonts before and after serialization to be considered
different, even though they are not. The from/toString methods were
made to write and respect the exact font style.
[ChangeLog][QtGui][Important Behavior Changes] QFont::toString() and
QFont::key() were modified to save the font's style name if one is
set, invalidating any stored font identifiers. QFont::fromString()
was also adjusted to accommodate the change.
Task-number: QTBUG-54936
Change-Id: Ibc7c54119acdd8f0950d6049cc89f859bf981504
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
One of the good features of the new connection style is that
implicit conversion is performed for the connection arguments.
However, this is also a bad feature when it comes to the old
C remnants in the C++ language: for instance, doubles implicitly
convert to ints, possibly losing precision (and GCC/Clang do not
even warn about those under -Wall, only MSVC does) or even
triggering undefined behavior.
For this reason, when using braced initialization, C++11
disables narrowing conversions or floating/integral conversions.
Use this feature when checking the arguments of a PMF-style
signal/slot connection. Technically this makes the program
ill-formed, however GCC still accepts it (but at least
warns under -Wall).
Hence, add a way to disable these implicit conversions.
This is a opt-in and guarded by a macro, as it's a source
incompatible change.
[ChangeLog][QtCore][QObject] The
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT macro has been added.
When using the new connection syntax (PMF-based) this macro
makes it illegal to narrow the arguments carried by the signal,
and/or to perform floating point to integral implicit
conversions on them. When the macro is defined,
depending on your compiler a QObject::connect() statement
triggering such conversions will now fail to compile.
Change-Id: Ie17eb3e66ce0cd780138e60d8bb7da815a4ada83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
In Qt Quick there are many places which copy mouse events repeatedly,
with the only goal of adjusting the local position. Instead it's much
more sensible to re-use the same event.
Change-Id: I2c6f2b73ee3a7a6df489f813cf2f60b48a6e48df
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Change QOpenGLTextureBlitter to be a public API, as it was originally intended.
There are now significant external uses outside qtbase (C++ compositor examples
in QtWayland), and the API is considered proven enough.
[ChangeLog][QtGui] QOpenGLTextureBlitter, a utility class to draw textured quads,
has been made public.
Change-Id: If7a2c94e1494195e2aa375d214932fa7b4c78321
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
There was a race condition between QObject::disconnect() and
QMetaObject::activate() which can occur if there are multiple
BlockingQueued connections to one signal from different threads and
they connect/disconnect their connections often.
What can happen in this case is:
T1 is in activate() method and T2 is in disconnect() method
T1 T2
locks sender mutex
selects next connection
unlocks sender mutex
locks sender mutex
sets isSlotObject to false
creates QMetaCallEvent derefs connection
posts event
Two things can happen here:
1. Connection can still be valid, but it will have isSlotObject==false
and callFunction will be used instead of slotObj
2. Connection can already be invalid
To fix it mutex unlock should be moved after QMetaCallEvent creation.
Also there is another case, when we don't disconnect but delete the
receiver object. In this case it can already be invalid during
postEvent, so we need to move mutex unlock after postEvent.
Change-Id: I8103798324140ee11de5b4e10906562ba878ff8b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Extract the common part from QItemDelegate and QStyledItemDelegate
which uses QLocale to convert a value for Qt::DisplayRole to a string.
Use this code to get the text for tooltips and "What's this?".
[ChangeLog][QtWidgets][QAbstractItemDelegate] Show localized detailed
tooltips and "What's this?" texts.
Task-number: QTBUG-16469
Change-Id: I8618763d45b8cfddafc2f263d658ba256be60a15
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
In a TLS handshake the ephemeral server key is saved in the ssl
configuration. Clients who want to get the length or algorithm of the
key only get "Opaque" and "-1" as a result because the key is always
stored as "Opaque". This change converts the key to specific type so
more details are available and the client don't need to convert the
handle by hand.
Change-Id: I60f90fc2c1805e528640d391b20c676b6eeeb49e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
It crashed when d was equal to Data::unsharableEmpty().
Task-number: QTBUG-51758
Change-Id: If9f2a7d11892507135f4dc0aeef909f59b7478fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Adds parsing and handling of the indirect sibling selector, this should
mean we can at least parse all CSS3 selectors even if we do not yet
support all of them.
Also adds tests for previously added CSS3 selectors.
Change-Id: I1ce9afb9466044a38bdec167affc21a87837e4a4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fix a mistake introduced recently and revealed by lancelot. Adds an
auto-test for rotations to catch similar errors faster in the future.
Change-Id: I028a160107d98899e723481b6201ef776f20c721
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This is a partial revert of a4e2f2e687.
That fix tried to avoid the risk of a crash in pixel() by ensuring
Mono QImages created with external data also got a default color
table. However, that broke usable behavior in existing code that was
painting in Mono QImages using color0/color1.
This commit reverts to the old behavior, and instead expands on the
checking in pixel() so that lacking color table is handled gracefully
for all indexed formats.
Task-number: QTBUG-54827
Change-Id: I9164198bed9d20c4b12cdba40a31c141bef3128d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Adds the three CSS3 attribute selectors.
During this the internal naming of the existing attribute-selectors have
been changed to be more clear, and the dash-matching has been fixed to
not just be beginsWith.
A non-breaking space have also been removed from the CSS.
Change-Id: Ia4db4a5a19e3ceee8c3c8a4b744149edd1d32bdc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
Now QBasicMutex is Lockable and QMutex is TimedLockable, which means they can
be used in std::lock_guard, std::unique_lock, std::lock, etc.
[ChangeLog][QtCore][QMutex] QMutex now fully models the TimedLockable
concept by providing the try_lock, try_lock_for and try_lock_until
functions, therefore making it usable in Standard Library lock
management classes and functions.
Change-Id: I7c691481a5781a696701e1ab78186b5cefbd6a87
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As a special case, setting the value of chunk size to zero forces
QRingBuffer to produce a separate QByteArray on each call which
appends the data. So, this enables a packet mode where portions of
data are stored independently from each other.
Change-Id: I2d0b331211901a289da7d4533e974f06830b5590
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds rounding before using the optimized low accuracy interpolation,
this reduces the magnitude of error in the scaled result from ~4 bits
to just 2 bits.
Change-Id: Ie4e618bf5b1f4a74367aa419ebbd534cc6a846b3
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This requires fixing the test on Windows: QMutex internally uses
WaitForSingleObjectEx which can wake up early, according to the system
timer resolution:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms687069(v=vs.85).aspx#waitfunctionsandtime-outintervals
QTime must be so slow that it hides the early wakes, but QElapsedTimer is
accurate enough to make the test fail unless we add back some tolerance to
compensate for the early wakeups.
Change-Id: I20b38af9c87a0b0e38a19b9bff1c3c24975c78f5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While connecting, the socket goes through the HostLookupState. In
this state, the socket engine is not yet created, unless the socket
had previously been bound. When it has been bound, we should keep
the socket engine even if the user initiates a delayed close by
using the write()+close() sequence.
Change-Id: Iefebcb33cd72cb49617acbac8e02af9d8209c869
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For platforms not providing mkdtemp(), QTemporaryDir relied on an implementation
of q_mkdtemp() operating on char *, converting back and forth using
QFile::encodeName()/decodeName() when passing the name to QFileSystemEngine.
This caused failures on Windows (which uses "System"/Latin1 encoding)
for names containing characters outside the Latin1 space.
Reimplement q_mkdtemp() to operate on QString, which avoids the conversions
altogether and also enables the use of larger character spaces for the
pattern.
Add tests.
Task-number: QTBUG-54810
Change-Id: Ie4323ad73b5beb8a1b8ab81425f73d03c626d58a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We should not call prev() if we had already reched the end.
Task-number: QTBUG-54815
Change-Id: I56bc86880a0dbfdce57fc4a08e5950f2ff3a5958
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If an error occurs during the transaction, we should prevent the
containers from being successfully read. So, check the status of the
stream before reading the container, because the deserialization
procedure temporarily resets it on entry.
Task-number: QTBUG-54022
Change-Id: Ie955c2fa3e449374f0f8403f00e487efa2bfdaf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
C preprocessors augment their standard list of include paths from the
environment: Unix preprocessors use $C_INCLUDE_PATH (for C) and
$CPLUS_INCLUDE_PATH (for C++), plus CPATH for both, whereas MSVC uses
the an environment variable simply called "INCLUDE". Handling this for
MSVC is particularly important because the VCVARSALL.BAT script sets the
necessary #include paths in the environment for important things.
Without that being parsed, moc won't find some #defines, like
WINAPI_DESKTOP_FAMILY.
[ChangeLog][moc] qmake and moc now cooperate to use the Visual Studio
environment variables (set by the VCVARSALL.BAT script) to find system
include files. A possible consequence is that moc parses application
headers slightly differently, depending on #if conditions that depended
on macros that previous versions had not seen #define'd. Implementers of
other buildsystems are advised to pass the --compiler-flavor=msvc option
to moc.
Change-Id: I7e06274214d1939b0124e5b4bf169cceaef9ca46
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In order for moc to properly parse #ifdefs and family, we've had
QMAKE_COMPILER_DEFINES as a list of pre-defined macros from the
compiler. That list is woefully incomplete.
Instead, let's simply ask the compiler for the list. With GCC and
family, we use the -dM flag while preprocessing. With ICC on Windows,
the flag gains an extra "Q" but is otherwise the same. For MSVC, it
requires using some undocumented switches and parsing environment
variables (I've tested MSVC 2012, 2013 and 2015).
The new moc option is called --include to be similar to GCC's -include
option. It does more than just parse a list of pre-defined macros and
can be used to insert any sort of code that moc needs to parse prior to
the main file.
Change-Id: I7de033f80b0e4431b7f1ffff13fca02dbb60a0a6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
The XML parser uses fastScanLiteralContent() to read a block of
text. The routine was not checking the range of valid characters as
defined in the XML standard:
https://www.w3.org/TR/2008/REC-xml-20081126/#NT-Char
A check has been added to stop reading the bad character.
Note that the characters are legal in XML 1.1, but QXmlStreamReader
is a well-formed XML 1.0 parser
[ChangeLog][QtCore][QXmlStreamReader]
Fixed a bug in the XML parser that prevented to load XML that
contained invalid characters for XML 1.0.
Change-Id: I10aaf84fbf95ccdaf9f6d683ea7c31925efff36d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
Do not increment 'data' past the buffer in case of invalid token.
Remove the left over qDebug so we can make a test.
Task-number: QTBUG-54609
Change-Id: I8f0dd3381fbdea3f07d3c05c9a44a16d92538117
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QTRY_VERIFY seems to be a better solution.
Change-Id: I92f9d11c393d9a464716b9224da1fd9c2be956a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Add autotest for QHttp2ProtocolHandler. This patch contains a very simplistic
"in-process HTTP2 server" for testing the protocol's basic logic/flow control/error
handling and emulating possible scenarios.
Task-number: QTBUG-50956
Change-Id: Ie02d3329c5182277a3c7c84f1bae8d02308e945d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The hash function is carefully designed to give the same result
as the straight-forward implementation of qHash(unordered_map),
which we'll probably add at some point, namely: std::accumulate
over a container of std::pair.
This is one reason to use std:: and not QPair in the implemen-
tation of qHash(QHash). The other is that qHash(QPair) uses a
bad hash combiner, which may xor out the 'seed' from the result.
We can't fix that until Qt 6, but the qHash(std::pair) overload
uses the well-known boost::hash_combine algorithm (implemented
in Qt as QtPrivate::QHashCombine), so we can use that.
I also trust std::pair to work without problems with reference
template arguments, while QPair only very recently gained a very
basic auto-test for reference parameters.
[ChangeLog][QtCore] Added qHash() overloads for QHash, QMultiHash.
Change-Id: I90879d8a99cf1aadb6e84ecc0c3704f52f3691da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"foo" ## "bar" doesn't make a lot of sense, but MSVC allows them
(although gcc errors out on them). Simply ignore the ## in this case
instead of aborting with an error.
Fixes parsing of the Windows winsock2.h header.
Task-number: QTBUG-54560
Change-Id: I84cd5fbb56a006cf379430708c955cf0da475cff
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
when the file name is empty, the path will be returned verbatim. this
must be considered when constructing the return value.
Task-number: QTBUG-54550
Change-Id: Ie108ed52275e66a154ef63bd6f7193f55b3e0454
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that can make sense if a function which determines the availability of
a dependency fails to do so for unexpected reasons.
Change-Id: If6cd113df25aee66830c120a2fab067c822a4543
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
if() would simply "downgrade" a fatal error to a false condition, which
is certainly not expected.
Change-Id: Ie9c54f2bddf588856498bf795007b341b7c9363a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When setting a QFileSystemModel as model, the completion role
is set to QFileSystemModel::FileNameRole. This needs to be reset
to the default Qt::EditRole when setting another model.
Task-number: QTBUG-54642
Change-Id: Ie78d5d417e008ad05a2f995bdbc218b3ad1bc49c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It absence is just an oversight. The patch also adds test for the valid
inputs of the method.
[ChangeLog][QtCore][QJsonDocument] fromVariant can now take a QVariantHash argument.
Task-number: QTBUG-39751
Change-Id: I7e051413f930023db3cbb81452e77c56a7ceffe8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
