QLocalServer could only listen to sockets it created.
Thi is not always possible as sockets may be passed
by socketpair() or have to be created locally by
other means. This adds a similar feature to QLocalSocket
where a native descriptor maybe used.
Change-Id: I43b0af179b3b868dd164d4e1fd312ff4546cf9ff
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Tapani Mikola <tapani.mikola@nokia.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
The fileLineEndingTest case doesn't test network in any way and it is
conceptually wrong, too, as any tests where line endings are an issue
should be handled with .gitattributes rather than forcing user to
check out the repo with unix line endings.
Task-number: QTBUG-24271
Change-Id: I73986993edc227cb68b8f61d51cc1cf458d20989
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
An old coding error meant that the C runtime abort() function was
being called instead of QFtp::abort() when cancelling an FTP download
using QNetworkReply::close()
Task-number: QTBUG-22820
Change-Id: Ib97fda9769b2b55a08c042c66c4444cb6216d2b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Fix up for f5e1da12f0.
Change-Id: I3a730ce7e47d71551a46cc105ba2d1fe4e33b65b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
Rename rows using naming convention used elsewhere in this test.
Change-Id: I8e669cedcc2058cf84cee976c8a0a478bc1cea0a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the codec name instead of just numbering the rows. This eliminates
some duplicate row names. Two duplicate rows have also been removed --
for the WINSAMI2 row, the last value in the row is different, making one
copy do a subset of the testing done by the other, so the row that did
less testing was removed.
Change-Id: I859f681a627e8d3839ca8a4ba09d541bec43d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Marked two tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qnetworkreply
- tst_qsslsocket
Task-number: QTBUG-24203
Change-Id: I9647833bf15fe5a340d7ef59e1dcb007a92677dc
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This function returns true if the file path can be used directly with
native APIs, modulo encoding and path separator conversions. This is
important for applications that interface with other libraries or simply
need to use native APIs together with Qt.
Traditionally, this information was available in QAbstractFileEngine and
forced users to explicitly create an engine or use internal API such as
QFile::fileEngine to access the underlying engine and this piece of
information.
Given its usefulness, exposing the information in a more visible place
is more appropriate. This reduces the need for people to know or care
about implementation details, like file engines...
The existing isLocalFs test was updated and repurposed to use the new
API, instead of relying on file engines and internal implementation
details of QFileInfo.
Change-Id: I65f497bb25741f6f7ea4d2c3b3562c8c4aab8bea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Socket notifier behavior is very OS-dependent. QtNetwork uses non-
immediately (it will return -1 w/ errno=EINPROGRESS). We have to wait
with select(2) to indicate that the connection is ready, then call
connect(2) again. When this happens, we need another call to select(2)
to get notification on the listening socket so that we can call
accept(2) to complete the connection.
The mixingWithTimers() failure happens due to the test expecting a
single processEvents() call to be able to completely connect a TCP
socket. But as described above, this may not happen. The test should
QTRY_COMPARE() to give the test a chance to let all this happen.
The posixSockets() test can fail due to the same connect() behavior. The
test already has a comment about the write notifier behavior being very
OS dependent. This caused the first enterLoop() to return too early,
before the read notifier fired (which is what the test is checking for,
that the read notifier fired). Move creation of the write notifier to
where we expect it to fire, just before writing to the posix socket.
In the same test, the read notifier inside QTcpSocket may not fire after
the write notifier on the posix socket. Use the waitForReadyRead()
function to give the socket a chance to read the data written to the
posix socket.
Change-Id: I541e6ee9a39a92ce3acf6b9ffee51079febe43e4
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
This architecture is obsolete and discontinued.
Support for PA-RISC can be re-added if needed, but it would be preferred
to use the GCC intrinsic support from qatomic_gcc.h (on Linux/HPPA, for
example).
Change-Id: I952e521a2c8c68840df0d44843b5487d5c20b135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For data-driven tests, testlib previously counted one fail or skip for
each data row that failed or skipped, while it counted only one pass
for a test function where all rows passed and counted no passes for a
test function where some rows passed and some rows failed. A similar
problem also existed for benchmark tests, which could run multiple
iterations of the same test, with each fail and skip being counted but
only a single pass being counted for the entire series of iterations.
This commit makes testlib count one pass, fail or skip for each data
row. Test functions that are not data-driven count one result for the
test function, as before. Benchmark tests count one pass, fail or skip
per iteration.
A side-effect of this change is that the test output in plain text, xml
and light xml formats now shows a result for every data row and
benchmark iteration executed, allowing post-processors to correctly
calculate the total number of tests executed. Previously, individual
rows were not shown in the test output if they passed, making such
calculations impossible.
The only change to the xunitxml output format is to correct a bug where
no test result was recorded for a test function if the last data row
was skipped and all other rows passed -- in which case the overall
result should be a pass. Note that there is also a pre-existing bug
in the xunit logger, where no result is reported if all rows are
skipped; that bug is unaffected by this commit.
Task-number: QTBUG-21848
Task-number: QTBUG-22124
Change-Id: I7e17177e10d6e89e55b9684c159bd506f21d002b
Reviewed-by: Ed Baak <ed.baak@nokia.com>
Set QT_TESTCOCOON_ACTIVE environment variable when the coverage is installed
for a test and unset it when the coverage data is saved. Tests that run when
QT_TESTCOCOON_ACTIVE is set are subtests and will not be considered as
stand-alone tests for the coverage.
When a test is run as a subtest its coverage data will not be saved for
itself but for the main test it is merged with. Also its status will not be
reported since only the status of the main test is expected in the test report,
e.g. the test tests/auto/testlib/selftests.
Change-Id: Icfdf99300aae18040e1a3441a8af21f68df4c0db
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
And fix documentation of toString() which said this was the method to
use for displaying to humans, while this has never been true.
Change-Id: Iff6df92e32b2517e1481d4992d80cae2d58da427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Do that by keeping the QWeakPointer that track QObject independent of
the ones that track QSharedPointer.
QSharedPointer do not touch the sharedRefCount in QObjectPrivate anymore
When converting a QWeakPointer constructed from a QObject to a
QSharedPointer, it will display a warning saying one should not do that.
Task-number: QTBUG-22622
Change-Id: I3595e3e7401702410776c458687ab357ad9366ab
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add QEventLoop::ProcessEventsFlags test data for
tst_QEventDispatcher::sendPostedEvents() to test that posted events are
sent when waiting for events and when not waiting.
Change-Id: I99f9eb121d0b1ded725e19c5233922fc0a6b81e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This will test the event dispatcher in corelib for proper timer and
posted event handling. The test makes sure all of the necessary virtual
functions are implemented and working as expected.
This test doesn't test socket notifiers or Win32 event notifiers, as
these are already covered in existing tests.
Change-Id: I5540ffc4e6d7f97bcd6c3725d7e74c0ab9c97015
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Next step is to remove navigate(), but that has to be done in
qtdeclarative first.
Change-Id: I01ea1386c092446be04cc19d0f70adf53f094adc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SVG support is now handled in QtSvg. Previously this test code would
normally be skipped when testing qtbase. This code is only executed
when testing qt5 with QtSvg enabled. This code will be moved to QtSvg.
Task-number: QTBUG-22360
Change-Id: I7372012469f9c0f9b7d3851a0ae696f8f935ba10
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed unload_after_implicit_load() to use full path
- Turned off app_bundle
Change-Id: Ibdf3ae0dc833d97eba64298715eb88c70408fff6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Only run invalidConstructs() tests if not cross compiled
Change-Id: If99fccdf9bca339507ca60c49aa89dc35c535d3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
This fixes a minor bug in VisualIndex triggered when calling
resizeSection with size 0 (but not hideSection).
It is mostly cosmetics - however hopefully there will soon
be a minor refactoring and there is really no need to make
strange code to keep a semantic bug.
However it is also doubtful to make a semantic change
while refactoring.
Change-Id: Ide153e421fd7a634062cb74867f4a49da4bf9cd6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QVERIFY2 and gracefully fail with an error message, rather than
crashing, if getgrgid() fails.
Change-Id: I82a7290f83208486577988cc831d5d3cba20f98e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The test was failing at:
QCOMPARE(property.userType(), qMetaTypeId<CustomType*>());
The CustomType* metatype was not registered before this part of the
test.
qMetaTypeId<T> will register the metatype for T before returning it if
it is not yet registered, while QMetaProperty::userType() returns 0 if
the metatype is not yet registered. However, the order of evaluation of
these two expressions in the above statement is technically undefined.
Apparently, gcc evaluates the arguments in order from right to left,
allowing the test to pass, while clang evaluates the arguments in order
from left to right, causing the test to fail.
Change-Id: I5059556e860cec29b57c31e4e26f46cf9e6055da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
- testCustomRuntimeDirectory test skips if run as root
Change-Id: Idcc2a1db5d8a96b2ec0248b8b1c392fffc0b2e11
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Added checks to see if running as root and skip as needed
Change-Id: I4f94d5bfe511c6dfda315854b7cd1f64efe6e4f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When run as root was able to move file to /etc directory but was
expecting a failure.
Change-Id: Ic2ac5506253f2a3395ed56e88a856542bf82ad6d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Correct a bug in the test and use unique names for data rows. The bug
was that the test assumed that QCOMPARE for float values 100001 and
100002 would fail, but it actually succeeds. QCOMPARE for floats uses
qFuzzyCompare(), which succeeds if the numbers differ by no more than
1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes,
while QCOMPARE(99998, 99999) fails.
Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of the subtests are only run with plain-text output format. For
those subtests, the other output formats were unused and gradually
becoming out-of-date.
Change-Id: I4c10f7f5bab2d2cc7d2d2ad641fbf5d4df02b798
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Our OSX 10.7 test machines send a SIGILL rather than a SIGSEGV to a
process which attempts to dereference a null pointer.
Change the "crashes" test to dereference an invalid pointer with a
value slightly greater than 0 so that we get the same crash behavior on
all (unix) platforms.
Change-Id: I700a2c7d654a9468af5e5996010a258695ed2ae5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To hide the IsPointerToTypeDerivedFromQObject monstruosity :-)
Documentation for Q_DECLARE_METATYPE and qRegisterMetaType was updated
to mention requirements on registered types and how they can be
circumvented for pointer types with the new macro.
Change-Id: If83b037a8e2f28761eb903525e87008107298801
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is possible to do this for example:
QVariant v = QVariant::fromValue<MyCustomQObject*>();
QObject *object = v.value<QObject*>();
This means that if a QVariant contains a pointer to a QObject
derived type, third parties can extract a QObject* and use its
properties without knowing the concrete type.
This is a source compatible change.
Change-Id: Iee9a9437e99cc2f40d1a4bfea47275482ef7161f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Previously, if any fields in the supplied record could not be matched
with a column in the target table, dataChanged() was supressed for all
columns for OnManualSubmit. This is not good because it prevents other
views from noticing the fields that *do* change.
It's simplest and probably more efficient just to emit
dataChanged() once for the whole row. Fewer signals need to be
processed and in typical cases much or all of the row is likely to
be changed anyway.
Change-Id: Ib56bf9a18e51b9cb85771acefcb2bf26e295a54e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In an apparent attempt to be economical with emitting dataChanged()
and submitting SQL to the databse, setRecord() compares each field
value of the record with the old value, taking action only when
a difference is detected. Several complaints against this code are:
-The comparision does not work on float type.
-It is really up to the application and database to decide this. The
model should make few assumptions. The application has the option to
omit fields from the record that should be ignored.
-The current behavior seems to assume that the "old" values are the
current state of the database, but the database may have changed since
the model was last refreshed.
-The code compares the value from record(), which probably
corresponds to the EditRole, with the DisplayRole value from data().
Change-Id: I11477c185eb411d442144dc682893d0df12d03d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When text has been selected in a QTextEdit and the left or right arrow
key is pressed, the cursor moves one character beyond the start or end
of the selection, when it shouldn't move past the selection. Fixed by
moving the cursor to the right place when a selection is active.
Task-number: QTBUG-22853
Change-Id: I9ea1863436db98627a6fd041ce554cf10be26493
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
(cherry picked from commit 1b031759ddfdab9703dfecac13f1ed318da3dafe)
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
QMetaObject::invokeMethod attempts to deference the extradata for
meta objects versions 6 and greater which is causing a crash in some
of the qtquick1 tests.
Change-Id: If5b2ca83b15de2cd558976c6b681dd5457c404d1
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Correct the implementation of cutText and copyText in QAccessibleTextEdit so
they use cut() and copy() methods of QTextEdit
Cherry picked from Qt 4 - 36202cf8fca822492615d418bd563a40bee4af08
Change-Id: I86a531ed7059b1a928cb8515c2743d4d8b596b36
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Previously, ignored messages were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data row in a data-driven test function didn't cause all of the expected
messages to be generated, the remaining messages would be carried over
to the next data row. This would result in errors about missing
messages being associated with the last data row rather than with the
correct data row.
This commit makes testlib check for missing ignored messages after
running each data row rather than only doing so after the last data
row.
This commit also adds a regression test to demonstrate that ignored
messages can no longer be carried over from one data row to another.
Change-Id: Ibee51aa6e96866fbcbcb4acee1a8340a86a6a4ba
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, expected failures were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data-driven test function called QEXPECT_FAIL and then didn't perform
any further verification steps to trigger the expected failure, the
expected failure would be carried over to the next data row, probably
causing the first verification step in the test function to XPASS (with
a seemingly irrelevant error message) for the next data row.
This commit adds the new function QTestResult::finishedCurrentTestData()
to cleanup after each data row is executed. This function treats calls
to QEXPECT_FAIL without subsequent verification steps as a test failure.
This commit also adds a regression test to demonstrate that expected
failures can no longer be carried over from one data row to another. If
run against the previous version of testlib, the new test would report a
pass instead of an error.
Change-Id: Ida5c7f080815b0dca9531131fed582b0918334cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWidget::isActiveWindow() was being checked in QAccessibleWidget::state
to determine if a widget is focusable. As a result, focusable widgets
were reported to be not focusable when the window was not active.
Change-Id: I73c47181ed132a84f0251cb67d0e20912e29a1a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.
Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.
(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)
Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Qt 5 seems like a welcome opportunity to stop emitting this
spurious beforeDelete signal.
Change-Id: Ib8628343ca9b8fdd85c154a206c7e2bf2c4c9dc1
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The open test case tests opening a device path on windows.
As this requires privilege elevation, the test fails when running
nmake check from a console.
As the CI machines appear to run tests with admin privileges, first
check opening the device using the windows API. If that succeeds, then
opening using QFile should succeed. If that fails, the opening using
QFile should fail.
(Since Windows vista, members of the "administrators" group do not run
at elevated privilege all the time. The user needs to opt in via a
UAC prompt or "run as administrator". This is similar to using the
sudo command on unix)
Ran the test as administrator and normally. Now passes in both cases.
Change-Id: Ibd7682eceb61e35d4912fa0392df536f4331f6ed
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Simplified the raster engine by treating image formats in a more
generic way and removed some unused code.
Change-Id: Ib3979a1a6e3e6f17c5002248545779ec36fff7c9
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QMetaType used to register a typeName and factory functions for
creation/destruction of objects. While it would be possible for a single
type name to be registered matching different actual types and memory
layouts, there was little that could be done about it.
Now that QMetaType is tracking type information with a direct impact on
data layout and ABI (size and type flags) it is important that we check
and detect binary incompatibilities as early as possible.
[Such incompatibilities could arise from type name re-use (technically,
ODR violations) or, more commonly, as version mismatch between different
shared libraries or plugins.]
Only type size and flags are checked as function pointers to inline and
template or otherwise non-exported functions could trivially differ
across translation units and shared libraries.
When registering typedef types, a check is made to ensure the same name
doesn't get registered as different types.
Change-Id: I8211c3de75d4854ce8fafdb620d3a931c206e0c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The function hasn't been working properly. It was not well tested, for
example it is undefined how QVariant should behave if it contains an
instance of an unregistered type.
Concept of unregistering types was inspired by plug-in system, but in
most supported platforms we do not unload plug-ins.
Idea of type unregistering may block optimizations in meta object
system, because it would be not possible to cache a type id.
QMetaType::type() could return different ids for the same name.
Currently QMetaType::unregisterType() is not used in Qt.
Change-Id: I878b6e8d91de99f9bcefeab73af2e2ba0bd0cba0
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
There is no point in keeping separate values which should mean the
same.
QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.
Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.
Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
The QNetworkReply finished signal does not have a bool parameter.
Change-Id: I87bd0410545f7a2fc2ab63cca90548f0585bf7a0
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ic958c4e5c15dd53a48479099b6b07803af6cb789
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ifceaff4c5a7f1b6408ec57196298e3f3038910c9
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As discussed on list and approved by Lars and Thiago.
Make QSystemLocale private to give us time and space to change it to a
better implementation.
Change-Id: Ifd806972f3996c43a876f544f78c6557ad71cd75
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Ensure consistent conversions by not using the system default locale.
Change-Id: I60db9fc4f465c0254f3213419e57d7879aaddd65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QByteArray is declared as movable but it was not tested before.
Change-Id: I4fb636f8705c3fd792a768872206203ee5fd4ddb
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Convert QDate to only use Gregorian calendar and not Julian calendar
before 1582. In future the Julian can be used via proper calendar
classes.
Change-Id: I547a3550332057a0ab1be616706630b6afaceffc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the QDate Julian Day number as an qint64 instead of uint32 to
enable support for dates before 2 January 4713 BCE. This changes the
possible date range to be approx 2.5 Quadrillion BC to 2.5 Quadrillion
AD. A qint32 was not used as it only covers 5 million BCE to 5 million
CE which does include Geological or Astronomical time.
The effective supported date range is currently 4800 BCE to 1.4 million
CE due to restrictions in existing conversion formulas. The effective
range will be extended later with new formulas.
Change-Id: Ib4345369455b31d4edae8c933b7721e76414e914
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmetaobjectbuilder should generate meta-objects of the same version
as moc; in the future, when the moc version is bumped, QMOB has to
be adapted at the same time.
QMOB was generating version 4 meta-objects. This patch makes it
generate version 6 (the current version). This also fixes a bug with
using qt_static_metacall with QMOB (setStaticMetacallFunction()); it
was already using the version 6 qt_static_metacall signature, which
isn't compatible with version 4.
Also add tests that ensure that the QMOB-generated meta-object works
with real objects; in particular we want to test the codepaths in Qt
that check for version >= 4.
Change-Id: I64a151ea5c947a6f8b7a00e85a39866446c735e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The 'real' datatype should be seen as a QVariant::Double type and not as
a QVariant::String type otherwise it does not get presented correctly
when using a non Qt application to access it.
Test is included for QSqlQuery.
Task-number: QTBUG-16373
Change-Id: Ie323ce49eb95e4d6bb4c3814ba9a957a63f4b259
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
(cherry picked from commit b23631015c23a49e3b4d296ea0a6266bfce3d4f1)
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This has only been around as compatibility interface for Qt4
but is now replaced by QPlatformInputContext.
Change-Id: I677dbbea46311bf39f6c5ca9dc3fb5009abe924a
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Use source file location as working directory for externaltests
Change-Id: Ic05259f48eece920b348ccbde9ba80c90dedfdd2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This file was removed in commit ba9302b8a9.
Commit 8fad23f326 removed openssl.pri from
src/network/ssl/ssl.pri, but not from the qsslsocket autotest.
Change-Id: Ic1a576ee7f0ee3d68471121ba636b94ce7bae455
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to keep binary compatibility, Qt 4 introduced V{2,3,4}
classes for QStyleOption subclasses. They're simple, low level
containers for various members with public access (no accessors
required).
In Qt 5.0 we can break BC, so this patch moves the members
from the derived classes into the ``base'' ones.
The ``base'' ones get a version bump matching the highest
version available, and the V{2,3,4} classes become typedefs.
This change can cause problems in code that used QStyleOption
directly, especially QStyleOptionViewItem, because the old V4
fields get default initialization but the QStyle subclasses
detect that the option is a V4 option and expect all fields
to be properly initialized. The fix in such places is to
properly initialize all fields.
Task-number: QTBUG-23522
Change-Id: I2f782da09ca5cc8c4cbafc07448fb0d33153a251
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made QString::operator=(QLatin1String) work in that case.
Change-Id: Ie77eabd2f8f036531d67cd8051a7b6305b386ccf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QTextStream and QDebug << operators work in that case.
Change-Id: I94d051ce2ebfb2d2a403b96d25e040c80a54bf7c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QString(QLatin1String) constructor work in that case.
Change-Id: I4f4f07a956144b7ea4aa9c58a61c755fb99ef1b3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QLatin1String comparison operators work in that case.
Change-Id: I234ba851e67a6f5cfbb46fb6f0b22623ce40be28
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QInputMethod better describes what the class is about, input methods
in general, be they panels or just composing input from key events.
Compatability headers added for old name. Not bulletproof but should be
enough to get transition done.
Change-Id: Iefde6e7ccb1ec4a3b226cef3469089e751c60fc1
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
- Needed to add toLower() for compare as c:\ and C:\ was causing
a failure.
Change-Id: Idd55774d118b7249e88362688166b4f9d9712c7c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to set working directory based on subprogram
stdinprocess's directory location.
- Changed QProcess execution of subprograms to use
relative paths.
Change-Id: Idbccca635f0f61adba9721bcceeceb0a8a961dcf
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rename some of the test functions to improve consistency, and change the
order so that all the xfail tests are together (some new xpass tests
will be added later).
Change-Id: Ice1ac5bf61bc26109bb0d08f72eb74e1a0424101
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test simply generates each possible pair of Pass, Fail and Skip
results. At present the test simply serves to demonstrate the current
shortcomings of testlib's plain text logging, namely:
* If a test function passes for all data rows, that is counted as one
pass, but each skipped or failed row counts as one skip or fail.
* Only skipped and failed rows are reported individually in the test
output. Passed rows are not reported, so it is impossible to see how
many rows were executed.
* A skip followed by a pass will be reported as an overall pass for the
test function, but the same rows in reverse order will not report any
overall result for the test function.
Future commits will attempt to correct these problems.
Task-number: QTBUG-22124
Change-Id: If8c7ea15fc43ba9a1bccd0e881c1efc18e705b25
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qtextbrowser unittest to use TESTDATA and QFINDTESTDATA
Change-Id: I0ac7c990640d492d5ec94f5824c022a2b5075103
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qlabel unittest to use TESTDATA and QFINDTESTDATA
Change-Id: Ide6755cd79caf91b553fb6b1412da6fbab583720
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This provides a stronger mechanism e.g when inheriting QItemDelegate.
It makes some things much easier e.g avoid delete of an editor
and maybe only delete depending on what the editor says itself.
This introduces a new virtual function.
Task-number: QTBUG-2299
Change-Id: I8410f8199775987dbacffd99e4c354fdadcdd21f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a test that verifies correct behaviour of qheaderview.
It includes test of swapSections, moveSection, rowcount-change,
resizeSection, hideSection and position lookup.
Change-Id: Idc1fe8167f2d95dee5c5b1161cb633cbf9495d17
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Always use <qt_windows.h> as the last file to be included.
- Remove it from some headers, use Qt::HANDLE instead of HANDLE.
- Clean up #ifdef, use Q_OS_WIN for Windows/Windows CE.
- Add NOMINMAX to qt_windows.h to avoid problems with the
min/max macros.
- Remove <windows.h> from qplatformdefs.h (VS2005)
Change-Id: Ic44e2cb3eafce38e1ad645c3bf85745439398e50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Record the file, line, and function where a qDebug, qWarning, qCritical
or qFatal call happens, and make this information available in a custom
message handler.
The patch uses the C preprocessor to replace qDebug, qWarning, ... with
a line that also records the current file, line, and function. Custom
message handlers can access this information via a new QMessageLogContext
argument.
Change-Id: I0a9b89c1d137e41775932d3b1a35da4ebf12d18d
Reviewed-by: David Faure <faure@kde.org>
This patch removes the posibility to call resizeSection
with negative sizes.
Sections with negative sizes affect the other sections,
and it does not seem to have a useful, well-defined semantic.
The length can also become negative - and visualIndexAt
work strange.
Change-Id: I632beb160649fa10e2106314557b8c5a106aa3cf
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
A feature of a ref-counted quit (managed by a quit-lock class)
is added to both QEventLoop and QCoreApplication.
This allows, for example, an event loop to quit() when there is
no more work for it to do.
quitOnLastWindowClosed is implemented in terms of the refcount in
QCoreApplication so that jobs can be completed before the
application quits.
Change-Id: I14c8f4e7ee12bbf81a6e5849290d4c8ff37fa110
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
A QImage can be constructed with a provided buffer, that has to be
kept alive for the live-time of the QImage and all its copies.
Frameworks like CoreGraphics or Cairo offer a similar method of
creating image objects and also offer the ability to provide a callback
function that is called when the image is destroyed.
This patch adds this functionality to QImage by extending the
QImage constructors that take a raw image buffer pointer.
Change-Id: Ia6342408c560ef49b498c9e4664b4602febb0fcd
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Commit 4b8ceb41ae added the requirement
that pointed-to types need to be registered when registering pointer
types. Unfortunately, the implementation also affects function pointer
types.
This change whitelists 0, 1, 2 and 3 argument functions as not deriving
from QObject, forgoing the need to workaround details of the type
registration implementation when registering those function pointer
types.
Change-Id: I4d855e9d70a8179a6e31b84623ad5bf063e0d6d8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove methods that have been marked as deprecated
before Qt 4.6. Keep others, but inline them
where possible and mark them as QT_DEPRECATED_SINCE(5, 0).
Change-Id: If881821ae095f054b31cc13464f19e2007c20ed7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This allows QStandardItemModel to be usable in QML without requiring
clients to subclass it.
Task-number: QTBUG-15067
Change-Id: I867fcd8137132affdf21f37a9fa293e855a09a13
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As discussed on the development mailing list, the window list returned
by QGuiApplication::topLevellWindows() included all QWindows, even the
non top-level ones.
This commit introduces the new method allWindows(), which returns the list
of all QWindows, fixes the list returned by topLevelWindows() and also
introduces tests for both methods.
Change-Id: I761f0fcdec79f83949012c628655ed12cd18572c
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QIntValidator and QDoubleValidator used to accept C formatted input if
the input wasn't valid in the default locale. This change removes this,
only the default locale is now used.
Change-Id: I8b2d8f9f3849abe3fcb5c12083aae542a76eaf90
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Change-Id: Ife590b7639f4aadcfbd4d77ca170285b623c14ae
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
- Changed to use TESTDATA and installTestHelperApp()
- Changed to use QFINDTESTDATA instead of currentPath()
Change-Id: Ia24ebc758d5d0fdfcca951500766adefbcf9fe93
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed unittest to use QCoreApplication::applicationDirPath()
instead of QDir::currentPath().
Change-Id: I398f7ea8b4426be85432d0eb3767ef6d59488d0a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added check to testLocateAll() to check count() before calling
first().
Change-Id: I04e93c1f913972b26c517f2bbd08760f9898cc7a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qsplitter unittest to use TESTDATA and QFINDTESTDATA
Change-Id: I5db0fbfb20e6bd0ec169e884f16c1ec819f4e449
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Two cases of image.png not being found when run from install directory
Change-Id: I5f20b7a0ea0b120ce06c556b83bc20dd658a4f83
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- jumpToFrame() updated to use QFINDTESTDATA
Change-Id: I1b5ff92722e389e714eb58b37996f3e933e95489
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Check the validity of date/time before attempting to perform maths.
Change-Id: Ia6a2caf07c6c36f7d7fac713a77bc4eb456c6ed6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A few methods in QString still assumed that QLatin1String
is always 0 terminated. Change this to rely on the size
provided by QLatin1String instead.
Change-Id: I9145a46e52ed8811f3b4e3d72d8a81a12588760a
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Open the comparison file as text mode, so that it does not differ from
the dumped certificate in CRLF vs LF line endings.
Change-Id: I54d6ea6e37044059e89e762435657ebf5fa6cb39
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been broken for months, but invisible because the code causing
the link error is unreachable (due to QSKIP). So the link error only
occurs in debug builds with -O0.
Change-Id: I6093a7803bedf37bfc8c2d9ff0b28b2309b57959
Reviewed-by: Richard J. Moore <rich@kde.org>
If the object is null, simply return an empty variant map.
Added another test case checking conversion from QJsonArray
to a QVariantList.
Change-Id: Ieccd163e76630f7db7f41255acd9d1baf66bb38d
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
QVariant::UserType does not correspond to an actual type named
"UserType". This logic didn't make sense.
Change-Id: I369911e514f7902fc863cb05174011d6fc15c447
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The QDnsLookup class provides asynchronous APIs for performing
DNS lookups. For now, the following lookups are supported:
- A and AAAA
- CNAME as defined per RFC 1035
- MX as defined per RFC 1035
- NS as defined per RFC 1035
- PTR as defined per RFC 1035
- SRV as defined per RFC 2782
- TXT as defined per RFC 1035
Task-number: QTBUG-10481
Change-Id: I46c1741ec23615863eeca3a1231d5e3f8942495e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can be used by views to indicate whether a drop is allowed (eg
adequete permissions in a filesystem model).
Change-Id: Iefedb5399e44c8edc5f5df1403c8d5c0da618612
Reviewed-by: Peter Penz <peter.penz19@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
setSectionHidden called with (logindex, true) will
sometimes prevent a (correct) call to
resizeSection(logicalIndex, 0).
This seems a bit odd - however it does execute
d->doDelayedResizeSections().
Therefore the section is going to be hidden later.
However it is a problem that the length meanwhile is wrong.
(That is a value that is not the sum of the sections)
This is fixed by execute updates before returning the
length.
Task-number: QTBUG-14242
Change-Id: Ia1d2f6db3213792b250a6a37942b56554261cd3a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
File system cached metadata can't be trusted when custom file engines
are in use, because the custom file engine may want to override the
metadata. (e.g. present an archive file as a directory)
Therefore, check if a file engine should be instantiated for each
result in QDirIterator. This is a fast check if no custom file engines
are registered.
When pushing a directory (using QDirIterator::SubDirectories) the
file engine needs to be instantiated also.
Task-number: QTBUG-23688
Task-number: ou1cimx1#965023
Change-Id: I0114c8df6258535553783a2486131c4194926649
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
(cherry picked from 3864ad09d578210b52e5f58fca2ee8a1144f5be2)
In QMetaType "void" is a regular type, lack of c++ sizeof operator
force us to write a template specialization for the type.
Change-Id: I9a56e135223b416b8031836d29ef33ef3fb750e4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
These types don't exist anymore, so it's pointless to check for them.
Also remove the dead types from uic's type-to-header map.
Change-Id: I7f0af5c337859f3da1c103157a802bbe5372df9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Some objects expect connectNotify to be called in order the signal to be
emitted.
Change-Id: Id0460d9c2aef8f9c3618a2b62b2119a790e06f30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
setEncodedUrl() isn't necessary anymore now that setUrl can handle
encoded (and partially encoded) urls.
url() is added for symmetry with setUrl().
Change-Id: I4e671482a5635a86797421ca50882db9cd60d852
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes round-trip bugs. People expect to be able to do
QUrl u(...); QString s = u.toString(); QUrl u2(s); and have u==u2.
This was not true for paths containing a '#', for instance, which would
be parsed back as a fragment. The solution is to make toString output
partially decoded data (more readable than toEncoded, but not decoded
to the point of changing the meaning, if parsing it back later as a
QUrl), and to make the QUrl constructor work with partially decoded data.
Change-Id: I013c01e8947d538435f3c20fc4ec57cd9ccbba6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moving away from deprecated QInputPanel inputItem.
Small behavioral changes:
- On focus proxy widgets, disabling WA_InputMethodEnabled on
proxy will no longer disable input method for proxy target.
- setEnabled(false) on proxy widget will no longer disable
input method for target as a special case.
Change-Id: Ifb5b7144d29bd3aefdde7cf4a0bd396db06e67e2
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
* Deprecated QInputPanel::inputWindow() which is already
just returning QGuiApplication::activeWindow()
* Deprecated QInputPanel::inputItem() and introduced
QGuiApplication::focusObject(). Input methods can check
input method support by Qt::ImEnabled query.
Change-Id: I70a9c1c3f79aadb75c839d0489a9428f7a221df5
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Implement the public slot QWindow::close() and add the correspondent test.
Change-Id: If3f07cce3b26640f06fc52d0e4dca875d9894b3d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QLatin1String now has a constructor that takes explicit length, which makes it
possible to create QLatin1String that do not have null-termination character.
Fixed QString::operator> and < to be safe in that case.
In the same patch fixed qtjson which had operator< implemented in the same way.
QString::compare(QLatin1String) is still broken and will be fixed separately.
Change-Id: I48ec1183a6f44034129cc17312af854795085408
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If T is defined as a metatype, then QList<T> is too automatically.
So for example, no need to use
Q_DECLARE_METATYPE(QList<int>)
anymore.
This is a source compatible change.
Change-Id: I2ee8a7b9e28fe6d4775f6a05cce39aca8563e0c5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
