and run the configure checks with the values
Change-Id: Ie8e0072c686c6a7dce1d02e25a9c1abce4679d34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use the standard g++ specs, just override the compiler name
Change-Id: I4adacd7204d3880155bdfc3405e20f322ad593ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The "check" target always depended on debug-check on projects that
explicitly loaded the testcase.prf, even if Qt was configured with
-release parameter. This obviously caused build failure. Changed the
testcase.prf to check which configuration is preferred using
CONFIG(debug, debug|release) like is done with similar cases in other
.prf files.
Task-number: QTBUG-24332
Change-Id: Ib5140b106e99efe51932bdd5a48914786de23230
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It was causing issues when cross-compiling with a sysroot, as the paths
were not prefixed with the sysroot. The right include paths should be
taken care of by pkgconfig anyways.
Change-Id: I2cf7bf6377c88e6bf3b015100444d082530337ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the new QMAKE_SUBSTITUTES.config = vebatim feature.
Change-Id: I4c08bd4694c11d48434eb225fc6902e69a4cdec2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Qt requires this since 482d96a0c5
Change-Id: Iba783e283b17654abf46f11b81cc1641c3ce7d83
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Simply include the generic arm-gnueabi configuration. This should work
from within and outside sbox, but at the same time keeping this mkspec
allows us to enable Harmattan specific features such as the xinput2/touch
support in the xcb back-end.
Change-Id: I5cc0cdc3e222deb6374580392c3e3aadfc3a4bd9
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtUITools is a static library, so we need to mark that in its
CMakeConfig.cmake file.
Change-Id: I4e3684f7c62f4af28956a6e8f58edce7724f50dd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This commit adds basic gesture support to WEC7 Qt builds, which
enables developer to create custom gesture recognizers based on mouse
events.
Note that QTouchEvents are not yet generated in WEC7 Qt builds, so
recognizers based on those cannot be created.
Task-number: QTBUG-22517
Change-Id: Ic6218500b28b78ca8edec3edebd00d84c308a182
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Handle the case of an empty DESTDIR.
(cherry picked from commit 122fa6b53c33364a4687919191e55899acb43797)
Change-Id: I0c2eec5736d0944b8ee97abdfa3f1121e7d8db4b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Unlike for libraries, $(TARGET) already contains $(DESTDIR).
Changing to $(DESTDIR) does break the command in that case.
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 7eb770aed35fee50ff98c12e390dcb02c72b5132)
Change-Id: Idd0f30d52db432062917a1c956c3af73e6c8a6a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Always use <qt_windows.h> as the last file to be included.
- Remove it from some headers, use Qt::HANDLE instead of HANDLE.
- Clean up #ifdef, use Q_OS_WIN for Windows/Windows CE.
- Add NOMINMAX to qt_windows.h to avoid problems with the
min/max macros.
- Remove <windows.h> from qplatformdefs.h (VS2005)
Change-Id: Ic44e2cb3eafce38e1ad645c3bf85745439398e50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: I330702f197c8b558f0a00b90f5e147dbef731abd
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
mkspecs for QNX qcc, armv7le and x86 targets
Change-Id: Ie4b0ec46a8837ad63f5aea8429cfdd516531e09a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Support cross-compiling for x86 and x86_64 nacl.
Change-Id: I652702f9671b35963450c42dac5e27bedc698df0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qtopia was killed some time ago and these files do not have a direct
use. Qt was embedded into the Qtopia sourcetree and it would be in the
hands of the Qt Extended fork to move to Qt5 and update the buildsystem.
It is unlikely that a Qt5 qmake will be used to build the Qt extended fork
as a copy of Qt is embedded in the source tree.
Change-Id: I2ef309c381aaf1d265ef385e85fd5c72d6205765
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When Qt is configured for static build, importing static plugins is
supposed to work as described in docs:
http://doc.qt.nokia.com/latest/qtplugin.html#Q_IMPORT_PLUGIN
This commit updates the qmake mapping for predefined Qt plugins, so
that Qt plugins are automatically found when QTPLUGIN keyword is used.
Task-number: QTBUG-18609
Merge-request: 1391
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 0d0c1082f74888044713d96deca2d510951d018a)
Change-Id: I0d0c1082f74888044713d96deca2d510951d018a
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The plan is to make it the default mkspec for Qt 5 on Mac OS X.
Change-Id: I49cf619a06fd7155dfbddc377558327b4be09cef
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
When set in configure it would be written to .qmake.cache and would only
apply when building Qt. We then had an override (that was also out of
sync, version-wise) in the g++ mkspec, which would also apply to apps
building agains Qt. This override did howerver not apply when using
the Clang mkspec.
We now move setting macosx-version-min to the common macx mkspec, shared
by both g++ and Clang, which will apply both when building Qt and when
building something against Qt. The latter since an application built
against Qt will not deploy on versions of Mac OS earlier than 10.6
anyways, so we might as well always set the minimum-version.
The modifications to the mkspecs will result in macosx-version-min
being passed twice when compiling qmake, as configure writes its own
makefiles and the mkspec parsing in configure has a bug where it will
lazily evaluate qmake-variables instead of evaluating them inline. This
is not a problem, and can be fixed in a later patch if seen fit.
Change-Id: Ib29503ad00a9dc00e0a50b0dbd9459e89a20dfbd
Reviewed-by: Zeno Albisser <zeno.albisser@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This reverts commit 613183ff8c
("Automatically add QtQuick module if only QtDeclarative is specified").
The QtQuick module has been around for a while now, and the need to
port to it has been duly announced.
After this commit, projects that use the QtQuick 2 API (QQuickItem
and friends) will explicitly have to add QT += quick.
Change-Id: Ie5e6d438431a0c736e214c28c0d1ba1189b4ee06
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change 1fb5600c5e already added
declarative-debug as a way to include declarative, but nowadays
there's also qquick, and qquick-private ...
Just always set the define. The user has choosen to write
CONFIG+=declarative_debug in the first place and an additional
define if declarative isn't used does no harm.
Change-Id: Ica6142e70b12950fc1d9e0bf7b94f747c843a17f
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
4.6 becomes the minimum required version in Qt 5.
This commit follows f6c61d13a3.
Change-Id: I151cd5ae63f076c4aa766bc5c9b9fb4d8fcd4f79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- All subprograms installed as part of test instead of separate installs
- Added installTestHelperApp() to testcase.prf
Change-Id: I02fbbb299f095054c9216ad0e5f91f574fb0fe3d
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: I4a7b96d33417a15d79f3932ced91bee58915c83f
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Most autotest .pro files should look like this:
CONFIG += testcase
TARGET = tst_something
QT = core testlib
SOURCES = tst_something.cpp
Change-Id: I051b230c5c4fd56dc6eae2b9b7bdff6c033248fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Change-Id: I3864017df6fc0daeb31b389c8883401d344730bf
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Allows the extras file to contain references to the target.
Change-Id: I47332c4efcb7ba0132509a41fa3040531cd1c81f
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On Windows, qmake searches for and uses the highest numbered available
version of each requested library, or a version with no number if no
libraries were found. This meant that qmaking a library's consumer
before qmaking the library itself could result in the consumer
incorrectly attempting to link against $${LIB}.lib rather than the
correct $${LIB}5.lib (for example).
QMAKE_$${LIB}_VERSION_OVERRIDE is the way to work around this.
Previously, a hardcoded list of libraries had version overrides set up
on Windows, but the qmake order issue affects all libraries, not just
these. Therefore, handle it for all modules.
Change-Id: I83b4646e3819f525193d1fc065b0d0e65b3be99f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These are no longer used. Qt 3.x used them to enable thread support
(which was optional at the time), but starting with 4.0, thread support
is always enabled, and these defines were removed from the code.
Change-Id: I4d1c75171c263383fc055d2a7fe52ca0501acd7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: I8f6795f1d40983af0478270f33ab1c06abe67133
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QtQuick and related APIs (QQuickItem, SceneGraph, et al), which
used to live in the QtDeclarative module, have moved to a new
module, QtQuick.
Existing projects that use QtQuick-specific APIs should add "quick"
to their project's QT variable, and update their include statements.
E.g.,
QT += declarative
should be changed to
QT += declarative quick
and
#include <QtDeclarative/qquickitem.h>
should be changed to
#include <QtQuick/qquickitem.h>
and similarly for the other QtQuick classes.
In order to give existing projects a chance to migrate smoothly, we
should issue a warning and automatically add the QtQuick module if
only the QtDeclarative module was specified. (If a project doesn't
use any QtQuick APIs, the warning can be ignored -- but there is no
way to disable it.)
This change, along with the compatibility headers in QtDeclarative,
make it possible to build existing projects without any modifications
on the project's side.
This change will be removed at a later time; when that happens,
existing projects that did not port to the QtQuick module will no
longer build.
Change-Id: I56abcadc1e5c74490527fc03646310d801bfc084
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
As it was in Qt4 and discussed on the cmake list.
Change-Id: Ide77c2525a261a5d658d7cb661010a67d3386341
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>