in non-prefix configs, one has to differentiate between the module's own
build dir and qtbase's build dir, because the forwarding headers are
placed in -outdir under include/, while the actual headers end up in the
real build dir under src/.
Change-Id: I1d8ac904556b354bd113995316ba11dd6560a70d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
don't pass arguments, as the sourced sync.profile's make assumptions
about the global variables' presence anyway.
don't return a value, as it's ignored anyway.
fix the documentation (also that of locateSyncProfile()).
Change-Id: I7527546718b12737d7a4551a834d7f0ca26a8a7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For source packages that don't have a .git subdirectory, syncqt is
executed before configure, with outdir set to srcdir, and this
caused path misalignments for injected headers in qt_module.prf
when generating makefile rules.
The fix is to change syncqt to always output injected header
paths relative to the source dir.
Task-number: QTBUG-64539
Change-Id: Ia2296e44494093dbf124729062f430ad6fca7262
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Bundle data source files which don't exist at qmake time need to be
handled specially. This also required splitting the generated list of
public headers, as was already done for private ones.
Task-number: QTBUG-60413
Change-Id: I97acfa88622da6b73839b8f976f73ace3cb10223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the target of the injected forwarding header doesn't exist at qmake
time, as it is generated by an extra compiler, so the touch() calls in
qt_module_headers.prf would fail.
the error scenario described in ce942a226 is not applicable to
gui/vulkan, as no bootstrapped modules are involved. therefore, we can
just suppress the timestamping.
Change-Id: I1c9b6fcdf3717069fdbb654e3cb5d73b199192f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
it makes no sense to version them, as they contain only #defines anyway.
it also removes the need to special-case their location in shadow builds
with pre-synced headers, which we actually failed to do anyway.
Task-number: QTBUG-56286
Change-Id: I4ea717f7be56494cfea0572389bea173d7470b6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it makes no sense to check them, as they contain only #defines anyway.
Change-Id: I8b36139ee19471de0654c5eb3af262d0389a72f7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
To match correctly (only) .h files, a regex needs to end in \.h$
Some of them missed the \, one missed the $.
(The last also had a legitimate .* before its misunescaped .)
One pair matched _p.h and _pch.h, which could be combined.
Change-Id: I7539a28eb7017cd0f1b36c72e05108e03a68a952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The check for Q_... macros used a regex that didn't allow digits; it
thus failed to match Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT6().
Change-Id: I3f9339349aa21e2fea04a7f53d9d8e0903e4c65b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This macro expands into a static_assert and can be used to
trigger a compile error if a certain feature is not available
when trying to compile some code.
This is especially useful to protect against accidental inclusion
of headers that implement functionality related to a feature.
Change-Id: I456c55b989ce5f35f3af0e13c1886a85c23dfe29
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't bother opening headers.pri files, as they won't match anyway.
Change-Id: I4d923266dabf1c9684fba4086f55bc24d76d23c5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the limitation to public headers seemed pretty arbitrary.
Change-Id: I0f2290fe09c8a6a70d056ec250b902be7049790e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We need to do the same chop trick that we do further down the file.
Change-Id: If4f832f375a11473e66adfcfa76a3b4504b3d406
Task-number: QTBUG-51324
Reviewed-by: Iikka Eklund <iikka.eklund@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Restore the condition for deciding what a private header is from
fe383e04 to not check *_pch.h files and third party headers.
This amends commit eddb938c.
Change-Id: Idc55269478e7f2c98fb7debceef8a53c3cb5c657
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Do not iterate separately over all header files. This removes
duplicated header iteration code which already was out of sync.
As a side-effect, we do run the header check only on header files that
are considered part of the module, if moduleheaders is set in
sync.profile.
Change-Id: Iec4c8febe9128139d2f377a1da8ce08c24110a77
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Another step towards the removal of the duplicated loop over header
files.
Change-Id: I542782627d8742a515a42034264e4569a2355823
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Turn lists into hashes and check for existence of an element using key
lookup. This leads to simpler testing code and is potentially faster.
Change-Id: Ibbf4f03ec64d6c295cc5e1664dfa73cd0ce8c272
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
that way other modules can use the headers without hacks.
this required making the base directory for paths in headers.pri
configurable in syncqt.
Change-Id: Id35cfe05bcf4c576d3f2d0d8d09590a5e23d21d3
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
We should even cause syncqt to exit, but that would cause developers
trying to test something to be unable to. So leave it just with an
"ERROR" message. That is hopefully enough.
Change-Id: Ib056b47dde3341ef9a52ffff13ef5f8588b62b99
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's easier to parse than qglobal.h. The objective is actually to have
macros with parts of the version number, so the major or minor numbers
could be used in other preprocessor macros.
Change-Id: I42e7ef1a481840699a8dffff1404eda1dd5c308d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Test each include file directly, instead of doing a large #include. This
verifies that each header is compilable on its own. One big advantage of
doing it via a special compiler in qmake is that we skip pre-compiled
headers, which has hidden build errors in the past.
This solution is implemented by making syncqt produce a second list of
headers. This list is the same as the list of headers in the source
code to be installed, minus the headers that declare themselves to be
unclean, via the pragma:
#pragma qt_sync_skip_header_check
This mechanism is applied only for public libraries (skipping
QtPlatformSupport, an internal_module).
This test is enabled only for -developer-builds of Qt because it
increases the compilation time.
On QtTest: the library only links to QtCore, but it has two headers that
provide inline-only functionality by including QtGui and QtWidgets
headers (namely, qtest_gui.h and qtest_widget.h). If those two modules
aren't getting compiled due to -no-gui or -no-widgets to configure, we
need to remove the respective headers from the list of headers to be
checked. If they are being built, then we need to make QtTest's build
wait for the headers to be generated and that happens when qmake is
first run inside the src/gui and src/widgets directories.
Change-Id: I57d64bd697a92367c8464c073a42e4d142a9a15f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
spaces in the source dir are not supported for now, as that requires
some more profound refactoring of the bootstrap makefiles.
Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Change-Id: I91ff06644e8047c2ca483f9768b46c1372eb6171
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Example with this code:
"template <class Key> struct QHashNode<Key, QHashDummyValue> {"
The previous regexp would take "QHashNode<Key," as some keyword,
and "QHashDummyValue>" as the class name. By forbidding '<' in the
keyword, we avoid such mistake
Change-Id: I5d5077b9e5e764e91899bcaef137d99214ea5d63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
let the syncqt + qt_module_header.prf pair handle generation of
forwarding headers.
in qtbase this is ineffective to some degree, as the need to create
QtCore's forwarding headers early for QtBootstrap requires qtbase.pro
already doing the real work, but at least we get the verification that
nothing breaks.
Other Modules (TM) will need the full functionality.
Change-Id: Ifd3dfa05c4c8a91698a365160edb6dabc84e553f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
since ever we've thrown out the phonon hack, each header is synced to
only one location (CamelCase headers notwithstanding).
Change-Id: Idfef33db9410908aefe309bc7a3edeae5fc5a671
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
no need to have two mechanisms for the same thing.
the values of %classnames can be comma-separated lists now, so one
header can have multiple classes assigned. conversely, if an extracted
class name reverse-maps to a different file name, it is omitted.
Change-Id: Ia0a35d64764b6376f33b77bbfe59e1df70a3cf1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we run syncqt on them only to get normal forwarding headers and the
headers.pri file. the module master include header and the module
version header are useless, and scanning for qt class names just wastes
time.
Change-Id: I58e8d1eb36cea5c31cbd46ce673438316d1963dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
now that we split out the part that depends on the project file, we can
do it cleanly here.
this way we can generate these headers at pre-build time already.
and for git builds, perl is probably faster than qmake at this task.
Change-Id: I343255c6de22329471a3ae2c2aac9ebeb160a501
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this avoids that syncqt needs to forward to a yet unexisting file (which
will have a yet unknown location, when syncqt is run at packaging time
already).
the %inject_headers syncqt config variable remains, so it can be told
not to purge "foreign" files.
Change-Id: I127ff6e0b7d5702fb0acaee9a5b7940b482d3608
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
