Add default parameter for arguments in start, startDetached, and
execute for better source compatibility with Qt 5.15. This has the risk
of then hiding incorrect calls to the previous overload taking a single
"command" strings if code is ported from pre-5.15 or ignores deprecation
warnings. This is acceptable, given that the alternative is that all
calls to these functions would require a default constructed QStringList
as the second parameter.
Change-Id: I1ba4df97ac4894d007da5083c8359015d784ddbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously, only the first observer would get notified. Also, make sure
that the notifiers are always retained when switching between bindings
and values.
Change-Id: I9c25c0f2e288dac3a335b68e618f7ddeb44be25a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When QFutureWatcher (or QFutureInterface) is paused, it doesn't
mean that it will take effect immediately: the pending tasks may
still be in progress and keep reporting results. At the moment
QFutureWatcher will queue those events and report only with the
next resume. This behavior is wrong, QFutureWatcher should not
decide when to report events, the sender should decide when is the
right time. There's no benefit in reporting already happened events
with delay. Because of this, even the pause event itself was being
reported after resume.
Fixed the behavior by removing the logic of queueing events when
the state is set to "paused". It seems unlikely that the users of
QFutureWatcher rely on reporting events with delay.
[ChangeLog][Important Behavior Changes][QtCore] QFutureWatcher will not
immediately stop delivering progress and result ready signals when the
future is paused. At the moment of pausing there may be still computations
that are in progress and cannot be stopped. Signals for such computations
will be still delivered after pause, instead of being postponed and
reported only after next resume.
Fixes: QTBUG-12152
Change-Id: I9f0b545ac096578c52cc72d60575c018c01e3368
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
[ChangeLog][QtCore][QSortFilterProxyModel] Add a 'autoAcceptChildRows'
property to always show children rows of accepted rows.
Change-Id: I2402469ece438179d0f19888b9775cc27cf5c749
Reviewed-by: David Faure <david.faure@kdab.com>
resize() to a smaller size does not reallocate in Qt 5 if the container
is not shared. Match this here.
As a drive-by also fix resize calls on raw data strings to ensure
they are null terminated after the resize.
Change-Id: Ic4d8830e86ed3f247020d7ece3217cebd344ae96
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added QFuture::onCanceled() method, for attaching handlers to be called
when the QFuture gets canceled.
Change-Id: I1f01647d6173ba0c1db6641e14140108b33ac7c4
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Introduced QtFuture::connect(sender, signal) function returning a
QFuture object, which is resolved when the signal is emitted.
Task-number: QTBUG-81589
Change-Id: Idbe301eb247b468b9b34f3470c3359d6a7af2f3a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Even in Qt 5, remove() can be passed an alias to *this. In Qt 6, with
the advent of substring sharing, this will become even more
pronounced. Use the same fix as was already used in QString::insert().
Pick-to: 5.15
Change-Id: I1a0d3d99fd7dff6e727661646d2cbfdc94df2682
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As best as I can guess, this used the QString::operator=(char), which
I locally removed. Before that lands in Qt, remove this ... wtf?
Pick-to: 5.15
Change-Id: Ie083fe69500d6b5b633416f89f5dd1d7068c20b2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Centralize, rather than keeping adding constructors from any
array-like container.
A more robust implementation, likely following the converting
constructor for std::span ([span.cons]), is out of scope for C++17
and will require C++20's ranges and concepts.
[ChangeLog][QtCore][QStringView] QStringView can now be constructed
from any contiguous container, as long as they hold string-like data.
For instance, it's now possible to create a QStringView object
from a std::vector<char16_t>, a QVarLengthArray<ushort> and so on.
Change-Id: I7043eb194f617e98bd1f8af1237777a93a6c5e75
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It has been the case for both QStringLiteral and QByteArrayLiteral
since Qt 5.0, and Q_ARRAY_LITERAL since Qt 6.0.
Since it's definitely surprising, add a note in the docs, which
is "somehow" consistent with the interpretation of capacity as
the biggest possible size before we reallocate. Since it's 0,
any manipulation of the size will cause a reallocation.
(Alternatively: the capacity() is for how many elements memory was
requested from the free store. No memory was allocated, so 0...)
Task-number: QTBUG-84069
Change-Id: I5c7d21a22d1bd8b8d9b71143e33d537ca0224acd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add an operator QVariant() to QRegExp to keep things at source compatible
as possible.
Add a hack to QVariant::load/save() to recognize the old typeid
for QRegExp and stream them correctly as long as the streaming operators
for QRegExp are registered.
Also move the datastream test for QRegExp to tst_qregexp, and adjust it to
the qvariant changes.
Change-Id: I120b38a7541b43ec07a21b17f7f35c55f071eb75
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replacement methods do now exist in QRegExp, or
for QRegularExpression when porting to it.
Remove all autotests associated with the old methods.
Change-Id: I3ff1e0da4b53adb64d5a48a30aecd8b960f5e633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The prepares for the removal of those methods from QString and
QStringList. The new methods in QRegExp are left as a porting help.
Change-Id: Ieffa33a79caf53b83029e9b070c4eb5cadca1418
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move pre/and post condition handling out of the main loop
to make that one as fast as possible.
Remove special handling of a corner case when the input length
is zero, where the utf8 decoder did something else than all
other decoders.
Change-Id: I94992767ea15405b38f7953adadaa6ff98b20b6f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no real dependency to QTextCodec in those files anymore.
Change-Id: Ifaf19ab554fd108fa26095db4e2bd4a3e9ea427f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Document QStringConverter, QStringDecoder and QStringEncoder.
In addition, do some touches to the API, renaming one enum value,
add a flags argument to one constructor and make some members private.
Change-Id: I8f99dc3d98fb8860cf6fa46301e34b7eb400511b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QStringConverter instead. Also change the default
encoding of QTextStream to utf8.
Change-Id: I30682e75fe0462d1a937539f773640c83a2d82e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a first step add setEncoding/encoding() methods that use the
QStringConverter::Encoding enum, and port all uses of setCodec()/
codec() over to the new API.
Internally QTextStream still uses QTextCodec, this will be ported
over to QStringConverter in a follow-up change.
Change-Id: Icd764cf47b449b57f4ebd010c2dad89e6717d6c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a replacement for Qt::codecForHtml().
Change-Id: I31f03518fd9c70507cbd210a8bcf405b6a0106b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add method that tries to determine the encoding of the data
from an initial byte order mark.
Change-Id: I348c51a3d4db9b434af53359b739a7e17acfc760
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add static methods that allow converting between a name for an
encoding and the Encoding enum.
Change-Id: I12bc503cf757ea31d3ca8d5e1f1216efddcb16d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a constructor, that allows constructing a string converter by
name. This is required in some cases and also makes it possible to
(in the future) extend the API to 3rd party encodings.
Also add a name() accessor.
Change-Id: I606d6ce9405ee967f76197b803615e27c5b001cf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Always encodee INI files as utf-8 in Qt6. This is mostly backwards
compatible, as old ini files would encode all non ascii characters.
[ChangeLog][Important behavioral changes] QSettings will now always
encode INI files as utf-8 (and the iniCodec/setIniCode methods are
removed). This is a change from Qt 5 and earlier, where QSettings would
by default escape all non ascii characters. The behavior is equivalent to
what you got in Qt5 by setting a utf-8 iniCodec on the settings object.
Settings files written in Qt 5 will still be readable in Qt 6 (unless
an iniCodec different from utf-8 was used), but to read Qt6 based ini
files in Qt 5 applications, setting the iniCodec to utf-8 is required.
Change-Id: Ic7dffcca17779bd5e3dae50d42ce633170289f6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Feed the data one by one to the encoder or decoder to
verify that the handling of incremental decoding is
correct.
Change-Id: I565e4f1872e00859026334f7662b6778772e159d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
IgnoreHeader was a rather badly defined enum, in addition the
utf8 and utf16 codecs where handling BOMs somewhat different
for stateless decoding.
Fix this by introducing explicit flags for writing a bom when
encoding and not skipping the initial bom when decoding.
Source compatibility for QTextCodec is done with a couple of
static constexpr variables.
Change-Id: I0b2d94f84c937cec1e0494c16ef448c00382691d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove support for setting a codec different from UTF-8
for writing XML files.
All XML readers today can handle UTF-8, and there is no
reason anymore to write a file in a different encoding.
Change-Id: If89fb2d2474a2b55644d9bed7473c11ad91033eb
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
The new QStringEncoder and QStringDecoder classes
(with a common QStringConverter base class) are
there to replace QTextCodec in Qt 6.
It currently uses a trivial wrapper around the utf
encoding functionality.
Added some autotests, mostly copied from the text codec
tests.
Change-Id: Ib6eeee55fba918b9424be244cbda9dfd5096f7eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former messes in bad ways with the overload set (it, fatally,
attracts char16_t, e.g.). The latter was probably added in response to
ambiguities between (char) and (QChar). While it's harmless now,
remove it, since it no longer pulls its weight.
The no-ascii warning is now coming from QChar(char), so the protection
isn't lost.
[ChangeLog][QtCore][QString] The += operators taking char and
QChar::SpecialCharacter have been removed as they cause adding a
char16_t to QString to call the char overload, losing information. The
append() function was not affected.
Change-Id: I57116314bcc71c0d9476159513c0c10048239db3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also port its callees. These functions scream to the QStringView-ified...
Change-Id: I13c95d65941eb8d02223306d80efd1437b4bd9b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUtf16(ushort*) and fromUcs4(uint*) overloads are going
to be deprecated. Use the newer fromUtf16(char16_t*) and
fromUcs4(char32_t*) overloads.
As a drive-by, use std::end()/std::size() where applicable.
Change-Id: I5a93e38cae4a2e33d49c90d06c5f14f7cb7ce90c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUcs2() named ctor is designed to replace all the non-char
integral-type constructors of QChar which make it very hard to control
the implicit QChar conversions, which have caused a few bugs in Qt
itself. As a classical named contructor, it simply returns QChar.
The fromUcs4() named "ctor", however, needs to expand surrogate pairs,
and thus can't just return QChar. Instead, it returns a small struct
that contains one or two char16_t's, can be iterated over and be
implicitly converted to QStringView. To avoid bikeshedding the name
(FromUcs4Result, of course :), it's defined inline and thus can't be
named outside the function. This function replaces most uses of
QChar::requiresSurrogates() in QtBase.
[ChangeLog][QtCore][QChar] Added fromUcs2(), fromUcs4().
Change-Id: I803708c14001040f75cb599e33c24a3fb8d2579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
wchar_t hasn't been QStringView's storage_type for a very long time
(at least since 5.10). And in Qt 6, we require char16_t support not
only in the compiler, but also in the stdlib, so drop the guards and
the alternative code paths.
Change-Id: I99f28b575f61c16a2497840708beaa4b54a80f57
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They don't work with std::span, since std::span has neither
const_iterator nor cbegin()/cend().
To fix, perfectly forward the return type with decltype(auto) instead
of mentioning T::const_iterator, and rely on the const-qualfication of
the help::c{r,}{begin,end}() functions' arguments to select the
correct T::{r,}{begin,end}() overload.
Change-Id: I4992d4bd521d2dc0f9ea51ae70cde8286ae543a5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's documented to be undefined if the number of seconds is outside
the allowed range, but it doesn't hurt for that undefined behavior to
happen to be that the result is invalid. Added a simple test.
Change-Id: I20c3f680c7948b3904f213452272133be77e4d62
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes][QDateTime] Removed all
locale-dependence from QDate, QTime and QDateTime, including the
Qt::DateFormat members that select the formats of the default and
system locales and the toString(Qt::DateFormat, QCalendar) overload,
which only used its calendar for these formats. All toString()
methods now use, and all fromString() methods only recognize, the C
locale's names for days and months. Use QLocale's methods if you need
to take locale into account.
Fixes: QTBUG-80441
Change-Id: I3a8968438741afb00f44262f79659c51e9b06c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
