Match the checks in the constructor test that are similar.
Change-Id: Ifb62af09e31aac339f001f44bc30789330c85be6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Directly writing to the underlying property storage has the potential of
breaking all kinds of internal invariants. As we return QBindable in
the public interface, we should not grant callers access to the
internals of the object.
Pick-to: 6.2 6.1
Change-Id: I737ff293b9d921b7de861da5ae23356c17690b78
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
System V semaphores are not supported in sandboxed applications,
so when Qt is configured with App Store compliance, or the user
requests POSIX IPC explicitly, we use that instead.
https://developer.apple.com/library/archive/documentation/Security/Conceptual/AppSandboxDesignGuide/AppSandboxInDepth/AppSandboxInDepth.html#//apple_ref/doc/uid/TP40011183-CH3-SW24
As the shared memory name limit on Apple platforms is very low,
we have to skip the existing logic for naming, and instead use
a truncated hash of the key. This should still be fine for
avoiding any collisions in practice.
An explicit check for the ENAMETOOLONG error has been added to
catch any cases where they key goes beyond the allowed length.
Sandboxed applications also have an extra requirement that the
key must include an application group identifier. This requirement
has been pushed up to the user and documented, as we don't have
enough information in Qt to know which identifier to use.
Both tst_QSystemSemaphore and tst_QSharedMemory work as before
with both sandboxed and non-sandboxed applications, after removing
some assumptions in tst_QSharedMemory about System V behavior.
Fixes: QTBUG-91130
Change-Id: Iaf1edb36a5d84d69e42ec31471a48d112faa8c6a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do a quick check whether the type name contains an anonymous type. If
so, do not try to use optimized version. The simple check should still
be faster than calling normalizeType unconditionally.
Also only apply the faster version for clang and gcc, instead of all
non-MSVC compilers. Applying it to other compilers would require further
testing to handle anonymous structs.
Moreover, remove space before '(', which is necessary for function
pointers.
Fixes: QTBUG-94213
Change-Id: I795d1964f7a68daa6f9a5f262816d51ee7728788
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Once we're in ~QObject, only methods of QObject are still valid.
Notably, no setter of any derived class is still valid. Thus, to be safe
we must no longer react to binding changes of those properties. To
ensure that this happens for QObjectCompatProperty properties, we
explicitly clear the binding storage.
Fixes a particles3d example crash.
Change-Id: I10d2bfa5e96621ce039d751cffaf3ac41893623e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The JNI interface expects a const JNINativeMethod[] and our wrapper
takes a non-const. Also, this was causing refactoring of exisisting code
with a const JNINativeMethod[] to fail because the call expects a
non-const.
Change-Id: If790c401650cb33fe31f93bafe41aab7714488e9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QPropertyChangeHandler is a templated class and it's argument is
a functor. That makes it inherently cumbersome to use the class
in any context where the change handler needs to be stored.
Introduce a QPropertyNotifier class that stores the functor
in a std::function<void()>, and add a QProperty::addNotifier()
method that can be used instead of onValueChanged().
Also make QPropertyNotifier default constructible.
This significantly simplifies the code that needs to be written
and makes it possible to store notifications as class members
without major hassle.
Fixes: QTBUG-92980
Change-Id: Id5b7baec093b9ac0467946cded943d92ad21030b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Since we changed binding evaluation to be always eager, we notify and
evaluate all bindings as soon as any dependency changes. This includes
bindings which have been initially installed on a property, but which
were later removed.
With lazy evaluation, we would only notify those bindings and mark them
as dirty, which is unproblematic. With eager evalution, we attempt to
evaluate the binding, though. While that part is still fine, afterwards
we would attempt to write the new value into the property. However,
there is no property at that point, as the binding is not installed.
Instead of adding a check whether the propertydataptr is null, we skip
the reevaluation completely by removing the bindings observers - and
thus the cause for the binding function's reevaluation. As soon as the
binding is set, we reevaluate the function anyway, at which point we
also capture the observers again.
Task-number: QTBUG-89505
Change-Id: Ie1885ccd8be519fb96f6fde658275810b54f445a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This removes traces of QPropertyAlias which is internal API which is
a) not really working even before this change (no compatibility with
QBindableInterface due to QPropertyAlias not being derived from
QUntypedPropertyData)
b) not used anywhere
For BIC reasons, we need to keep some methods still around until Qt 7,
though.
Change-Id: I5bb4735a4c88cba275dc2cc6e29a46ca09622059
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
[ChangeLog][QtCore][QMetaMethod] It is now possible to query the
constness of a method with QMetaMethod::isConst.
Change-Id: I8a94480b8074ef5b30555aeccd64937c4c6d97d4
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The calls were trying to pass a JNIEnv* from a QJniEnvironment using
conversion operator which was removed, and weren't detected since they
are templates and were missing tests. This fix that and add test cases
for setField() and setStaticField() calls.
Pick-to: 6.1
Change-Id: I6e1e6b7f557bbc664248ad364c48d63f58b70756
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Instead of silently failing, we now print an explanatory warning to aid
with debugging.
Task-number: QTBUG-89512
Change-Id: I36dd2ce452af12d0523c19286919095e366bd390
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch extends the QJniObject::callStatic[Object]Method functions
with the overload which accepts a jmethodID parameter. This can be
convenient when the method id is already cached and you do not want
to query the method by its name and signature.
Task-number: QTBUG-92952
Change-Id: Ib0852a5a27da2a244ac63112784751ef9e32cfa5
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This patch adds some convenience methods to QJniEnvironment API:
* an overload of registerNativeMethods() that accepts jclass instead
of const char *className.
* a findMethod() function is added to query a methodID of a static
or nonstatic method by its name and signature.
Task-number: QTBUG-92952
Change-Id: Ib1bc892decea97e625c4822888b6183af6edd6dc
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
With C++20 standard, src/corelib/kernel/qproperty.h of Qt Base cannot be
compiled at line 100:
QPropertyBindingSourceLocation(
const std::experimental::source_location &cppLocation
)
The reason is that source_location has been merged into namespace std
since C++20, and the header file has also been change from
<experimental/source_location> to <source_location>.
The problem can be avoided by define a constant.
Fixes: QTBUG-93270
Change-Id: I46b4daac6ea20f9623b43746880500d41396afb2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Define the template calls in the header to allow for better type
handling and checking with constexpr and avoid overuse of macros.
Depending on the type provided in the QJniObject's call, the
signatures and the correct JNI function variant is used.
If a type is not supported a static_assert throws a compiler error.
Pick-to: 6.1 6.1.0
Change-Id: I8a4d3ce85e1ff76ef385633f2a68511fffd12e55
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
If the signal takes a value, we pass the current value of the property
to it.
As we now use eager evaluation, accessing the current value is now
possible.
Change-Id: I5e6947a6575bfa8ca5143f56620c645d4750a686
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This mirrors the functionality of QObjectCompatProperty::notify, and can
be useful to delay notifications until a class invariant has been
restored.
Change-Id: I1c16a0b1537a1b53d144c8abe48e546553edf877
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Extended QObjectPrivate::ExtraData to store a pointer
to its parent, and reimplemented qGetBindingStorage()
function for QObjectPrivate::ExtraData.
This allows to use Q_OBJECT_COMPAT_PROPERTY macro
for a property, stored in QObjectPrivate::ExtraData
and solves all the problems with calling a custom
setter.
Task-number: QTBUG-85520
Change-Id: I40e01c29430846359ef9160fa1ae97c702be9a18
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
A sticky QPropertyBinding is a binding that does not get removed when a
write occurs. This is used in the QML engine to implement support for
the QQmlPropertyData::DontRemoveBinding flag.
Task-number: QTBUG-91689
Change-Id: Ib575b49abe634215318ccc7ba46212cc21eb4dad
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Add Qt::begin/endPropertyUpdateGroup() methods.
These methods will group a set of property updates together and delay
bindings evaluations or change notifications until the end of the update
group.
In cases where many properties get updated, this can avoid duplicated
recalculations and change notifications.
Change-Id: Ia78ae1d46abc6b7e5da5023442e081cb5c5ae67b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When a property value changes, first update all dependent bindings to
their new value. Only once that is done send out all the notifications
and changed signals.
This way, if a property depends on multiple other properties, which all
get changed, there will only be one notification; and (potentially
invalid) intermediate values will not be observed.
Fixes: QTBUG-89844
Change-Id: I086077934aee6dc940705f08a87bf8448708881f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Too much of the existing code in Qt requires eager evaluation without
large scale modifications. Combined with the fact that supporting both
eager and lazy evaluation has a high maintenance burden, keeping lazy
evaluation, at least in its current state, is not worth it.
This does not diminish other benefits of the new property system, which
include
- a C++ API to setup and modify bindings and
- faster execution compared to QML's existing bindings and the ability
to use them without having a QML engine.
We do no longer benefit from doing less work thanks to laziness. A later
commit will introduce grouping support to recapture some of this
benefit.
[ChangeLog][Import Behavior Change][QProperty] QProperty uses always
eager evaluation now when a dependency in a binding changes.
Change-Id: I34694fd5c7bcb1d31a0052d2e3da8b68d016671b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Since conversion operators do implicit conversion that might bring
some potential issues while using the API, let's stick to having
an operator* instead.
Pick-to: 6.1 6.1.0
Change-Id: Ie7ad5537958944b8d1c11d69fbd30284b4b0344d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
A few methods in QBindable which do not modify anything were not marked
as const so far. This adds the missing const, and a test to verify that
they work.
As all methods are fully inline, this does not cause any binary
compatibility issues.
Fixes: QTBUG-89508
Change-Id: If06d33bc405232887b8c371c268840ba34dbadf6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This commit amends 4ceaf22bed.
Signal parameter was not actually used, even is the signal was
specified.
This patch fixes it and also introduces unit-tests for this issue.
Change-Id: I029d413644eb6a72af3bdce27cc5f5bcadfe946a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There is no need to write emit and notify at the same time, as not
emitting after notify does not make sense.
This naturally only applies to properties with a changed signal.
Change-Id: I99ff7863a509262ad9d4f7c9c5afbc66fd37001c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
For QObjectCompatProperty, which allows to do basically anything in its
setter, it is actually easier to manually specify when the change should
become visible. This is in line with manually writing emit calls in the
old property system, and allows the preservation of class invariants.
Change-Id: I585bd3f25d722ca3fd721ead85fe73dbee26c5f6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Compilers are catching up, so some #if 0 codepaths can now be
conditionally enabled.
Change-Id: Ia9e87a096bc2ae4789ab390a9170d9c1eb9690d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Q_CC_GNU is defined on compilers that masquerade as GCC (Clang, ICC),
so using it to work around GCC-specific bugs is wrong. Introduce a
local define for _only_ GCC and use it in place of Q_CC_GNU.
Drive by: version-fence a test we now know it's been fixed upstream,
and correct the link to the corresponding bug report.
Pick-to: 5.15 6.0 6.1
Change-Id: I9059d6e6bf86157aca71590ac22afb1a1c114313
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This function returns the metatype corresponding to the metaobject, or
an invalid metatype for namespaces.
This works as follows: First we increment the metaobject revision for
new metaobjects. Metaobjects with older revisions are handled by doing a
lookup by name. That fallback is also used for dynamic metaobjects (from
QtDBUS and those created by QMetaObjectBuilder).
For new metaobjects, we store the metatype in its metatype array, behind
the property metatypes. This avoids any changes to the property and
method metatype extraction logic: For properties, the metatype access
does not change, as the new metatype is after their metatypes. For
method metatypes, we already have an indirection layer (using offsets),
so by adjusting those offsets by one, the same logic keeps working.
To distinguish between namespaces and dynamic metaobjects, namespaces
store the metatypeinterface pointer for void in the metatype array,
whereas dynamic metaobjects store a nullptr.
One nice additional benefit is that this simplifies the generator logic
in moc, as the metatype array is now never empty.
Task-number: QTBUG-92077
Change-Id: Id3f920f28553f12032a71a1a87dad29e5374dbe7
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Fix operator checks for containers whose value_type equals themselves.
It does not make sense to recurse on value_type in that case. Thanks to
std::disjunction having short-circuiting semantics, we can avoid that
issue by checking first whether T is T::value_type.
As a drive-by, check for value_type typedef before checking for
begin/end in is_container. This works around an issue in gcc <= 8.1,
which fails to correctly SFINAE the case where begin and end are private
methods.
Pick-to: 6.0 6.1
Fixes: QTBUG-89456
Change-Id: I27305a7cfe050f13a279c07f00bc229c01daa25b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The code in qtdeclarative did not do anything at all anymore.
Change-Id: Idd97145cb74aeb4f43dfce2f282a765e90945073
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There may be a race where e.g. thread 'B' is woken up by a queued invoke.
At the same time thread 'A' asks 'B' to quit, which will set various
atomics (some important ones are 'interrupt' in the dispatcher and
'exit' in the event loop), but it does _not_ try to send another wake
since there is already an unhandled wake triggered by 'B' itself.
Sadly 'B' reads the 'exit' atomic before 'A' updates it.
Then, slightly before, 'B' sets 'interrupt' back to 0, 'A' write 1 to
it, meaning 'A's interrupt is ignored. Then, since there is no
interrupt, 'B' goes back to waiting for events, leaving the thread alive
and running instead of quitting.
Maybe this has unforeseen consequences (one consequence is that it will
return and re-enter the event dispatcher once more, possible
unnecessarily)
Fixes: QTBUG-91539
Pick-to: 6.1 6.0 5.15
Change-Id: Ie6f861f42ffddf4817d5c8af2d764abe9d9103c2
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the discussion in https://codereview.qt-project.org/c/qt/qtbase/+/336742
changing our types from RELOCATABLE to PRIMITVE is fine.
Change-Id: Ica867203aa813d19fdfd3753fc4ff36ef4332fc3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before this change, the QMetaType for T const* where T is derived from
QObject would not store the static QMetaObject of T. This commit changes
this. As a consequence, the metatype system can now convert between
const and non-const pointers to QObject. Note that this allows casting
const away; but so does C++ with const_cast.
In addition, a new flag, QMetaType::IsImmutable is introduced, and used
to tag the metatypes of pointer to const types. This allows code to
discern between pointers to mutable and const QObjects, which is
relevant for the QML engine.
Task-number: QTBUG-82354
Change-Id: I3e4e4f39f565bd99a65e161528ce5304df73d6d6
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A recent change ( a7ca8b1a28 )
led to failure of binding removal in setInterval().
This was fixed by introducing setterScope.
This patch add unit tests for this regression.
Change-Id: Ic8da1f2d82ad6c8ccd81c9b1eff72d42cf75f28a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The initial implementation and the commit
c00ab6f8ea was wrong:
* env->findClass() in fact returns a global reference, and in any
case we shouldn't be calling that, instead QJniObject would be
enough.
* The size param provided to env->RegisterNatives was wrong.
* A test for registerNativeMethods() is added to ensure such break
is not repeated again.
Task-number: QTBUG-89633
Pick-to: 6.1
Change-Id: I4d3a6a9270755f465c40add25521fb750dd4de0a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
gcc 9 consumed enourmous amounts of memory building the test, regularly
dying on a VM with 4GB RAM. Splitting it up helps.
As a drive-by, use inline static variables, and rename the header used by
other tests to tst_qmetatype_common.h.
Change-Id: Ib716d8e3506aac6c87845e57b04cb1a4f6c68387
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Introduction of QObjectCompatProperty requires every write to
the property to be examined whether it is OK or should be replaced
by a setValueBypassingBindings/markDirty combination. The existence
of operator= make this difficult as it is easy to miss places where
it is written. By not having operator=, we can help developers
make sure they had a conscious decision about each write to the
property.
Change-Id: Ia61ea4722eb0bab26ce7684b85dd03d710cd1751
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is in line with QML where
import QtQuick 2.15
Rectangle {
width: 100
height: 100
color: "red"
Rectangle {
id: inner
x: 10
y: x
width: 50
height: 50
onYChanged: { console.log("hey"); inner.x = 10}
TapHandler {
onTapped: inner.x = 20
}
}
}
results in a binding loop warning when the tap handler triggers. While
the change handler would only run once, we cannot statically determine
if we need to loop once, twice, or if there actually is a diverging
loop. Thus we unconditionally warn about the binding loop and stop
executing the binding.
As a drive-by, verify in the related test that a change handler which
overwrites its properties binding itself removes the binding.
Change-Id: I5372019c2389ab724c49cd7489ecbd3ebced1c69
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
As part of Qt 6 restructring for the extras modules, this change exposes
the Jni APIs which are very important for Android platform. This patch
adds the APIs QJniObject, QJniEnvironment, QJniExceptionCleaner based
from private QtCore and QtAndroidExtras.
The Jni interface is cross-platform which justifies the name, but
currently, this API is used mainly for Android, and the naming comes
generic without Android keyword to avoid any future limitation on
supporting other platforms.
[ChangeLog][QtCore] Add new QJniObject, QJniEnvironment and
QJniExceptionCleaner APIs.
Task-number: QTBUG-89482
Fixes: QTBUG-89633
Change-Id: I4382dd53a225375759b9d042f6035a4a9810572b
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
We missed takeBinding as a supported operation on Q(Untyped)Bindable.
To avoid adding version checks to code dealing with QBindableInterface,
we simply synthesize takeBinding as a combination of binding to retrieve
the binding and setBinding with a default-constructed
QUntypedPropertyBinding.
Change-Id: I43803a0dfe210353d0235f0373d2257f75ffe534
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have plenty of places where we add some squares and take a square
root; this may be done more accurately and faster by hypot().
Introduce QHypotHelper to handle hypot with more than 3 parameters,
and with 3 when the C++17 version is missing (which it never should
be). Include an overload taking arbitrarily many valus and ensure that
we can use qHypot() with qfloat16. Illustrate with some example uses,
add some tests.
[ChangeLog][QtCore][QMath] Header <QMath> now provides qHypot(), an
implementation of std::hypot() taking arbitrarily many numeric values,
including support for qfloat16, while avoiding the overflow and
underflow problems that arise when naively taking the square root of a
sum of squares.
Change-Id: Ia4e3913fe83fc27d17d8e7f1a52f03ad445c1fed
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
