Fixes compiler warnings:
warning: implicit capture of ‘this’ via ‘[=]’ is deprecated in C++20 [-Wdeprecated]
Change-Id: Ia7cf50f491e92f39162c69afb2a8320afedba056
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Previously, it went direct to QTestResults::addFailure() without going
via the checking for expected failure. Add QTestResults::fail() to
take care of this checking, as for verify() and compare().
Tidied up the code implementing expected failure and QFAIL(), while I
was about it. Adjusted an existing test to verify that expecting a
QFAIL() works, by using QFAIL() instead of QVERIFY(false).
Remove the QVERIFY(false) whose comment brought this to my attention.
[ChangeLog][QtTestLib][QFAIL] QEXPECT_FAIL() now correctly anticipates
a subsequent QFAIL(). Previously QFAIL() counted as a fail regardless.
Change-Id: Icc28cf70e5ff3006363791ea03aa01f2f591eb71
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QNetworkInterface reports as up and running an interface,
seemingly having a valid IP address which actually has
not IPv4/IPv6 configured at all (this is what getifaddrs
gives us).
Change-Id: I5808d5dfdbc54004a1e02b791917e9b2ba62905f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add default parameter for arguments in start, startDetached, and
execute for better source compatibility with Qt 5.15. This has the risk
of then hiding incorrect calls to the previous overload taking a single
"command" strings if code is ported from pre-5.15 or ignores deprecation
warnings. This is acceptable, given that the alternative is that all
calls to these functions would require a default constructed QStringList
as the second parameter.
Change-Id: I1ba4df97ac4894d007da5083c8359015d784ddbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
We are, arguably, not testing QProcess and its ability to start or finish,
we test QUdpSocket. If, for some reason (as we discovered on some
specific machines recently) the process does not start or does not produce
any output (canReadLine), we QSKIP instead of failing. Also, all those
QCOMPARE will bypass the part there we stop processes - so must be
RAII-protected.
Fixes: QTBUG-82717
Change-Id: Idfb0d4a483d753f336b3827875eeaf51c79270e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Same as other versions of MSVC
Fixes: QTBUG-80328
Change-Id: I05c5ffe6d36e0cdfb781080a736c90b6a6d4b2ba
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Note the following bigger things that had to be done:
Handle GSS library / feature with a new custom find module.
Implement rudimentary support for relocatability (does not currently
handle extprefix).
Change-Id: Ic6cd27dda7ebca9829f51cb42ea76fff6d1767ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This is needed to make sure the output directory is in the correct
place somewhere under tests, rather than in $prefix/bin.
Change-Id: I98afa9c0a7517a8a10866b4c626bd4c4d2fd214f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Before testserver becomes a stable feature, let's keep testserver.prf in
"mkspecs/features/unsupported". The test server's shared files will be
stored in "mkspecs/features/data/testserver".
Because the path of testserver has been changed, all the tests relying
on the docker servers should be updated as well.
Change-Id: Id2494d2b58ee2a9522d99ae61c6236021506b876
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently docker is only used for the "echo" test, and then only the
echo server. The SOCKS5 tests have been disabled from when our current
test server was new.
Change-Id: I21b0c5f10e722a42a0880b2500d1bcbc609a03bf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Unlike higher scopes (like scope 4, admin-local, which the last commit
used), scopes 1 and 2 require a scope in order to bind, even if some
operating systems are lenient. So test that we are able to bind to them
and do bind properly.
Change-Id: Ifb5969bf206e4cd7b14efffd14fba153eab965b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
