Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When adjusting the tab order for compound widgets, it can happen that
the order is already correct. The check for this case forgot one case
which lead to a garbled focus chain.
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Task-number: QTBUG-10907
Change-Id: Ic3242746bdcf3a4db6ea8daa1498381500ca116d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's not possible to ask for window activation on Wayland, and some Wayland
compositors—such as Weston—don't give window focus to newly created window
either.
Task-number: QTBUG-62188
Change-Id: Ibebb2a14e03127fec703d79498627fccf65b2f88
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Windows 10 windows contain an invisible area within the NC window frame
on which the mouse cursor is enabled to perform resizing. This change
captures the geometry of the invisible margins and considers it when
moving a window, so that, for instance, a move(0,0) does not generate
gap between the window and the beginning of screen.
[ChangeLog][Windows] The dimensions of invisible margins inside the
frames of Windows 10 windows will now be disregarded in the positioning
of Qt windows to avoid a misplaced look (offset by a few pixels from
the expected position).
Task-number: QTBUG-55762
Change-Id: I1f537756eb1a093f78b919de9d44992528199700
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This way the platform window is destroyed in a timely manner, preventing
redundant close events from the window system.
Task-number: QTBUG-43344
Change-Id: Ifdfca59ceacef54405f1c227c493dc514a1b27ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
[ChangeLog][QtWidgets] QApplication no longer sends a mouse move event
to the entered widget if it sends synthetic enter and leave events.
Task-number: QTBUG-67736
Change-Id: I75daaffd53f1ddc2bc4d7df67382cbc22d3eb6fc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Drop the useless copy 'r' of 'region', reuse 'r' for the rects in 'region',
to clean up the region handling in verifyColor().
Change-Id: I8e159976b4b0152823be864488d2ef25d7cb0078
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A "compound widget" is a widget that has a focus proxy set to an inner
child. This is normal for complex black-box components where focus handling
is delegated to the children. Since the compound can have several
children, a local tab order might exist between them.
The current implementation of setTabOrder had no idea about
compound widgets. As such, when connecting two compounds in the
tab chain, it would just break up their inner tab order and
cause tabbing to ignore children other than the proxy.
The new implementation recognizes compound widgets, and add some
extra code to figure out the correct tab targets. This way, the
local tab order between the children will be preserved.
This implementation was inspired by the patches of Marek Wieckowski posted
in the linked bug report, and later modified by Nikita Krupenko.
[ChangeLog][Widgets] QWidget::setTabOrder() will now preserve the local
tab order inside a widget if it has a focus proxy set to an inner child.
Task-number: QTBUG-10907
Change-Id: I0673d39d70ec8c6bf64af30bf978d67c651b2f3c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
When tabbing/searching for the next focus widget, the current
code would check if the next widget in the focus chain
had a focus proxy, and if so, ignore it. The exact reason
for this behavior is not clearly understood, but some widgets
(e.g QSpinBox) has children (a QLineEdit) that sets the parent
as focus proxy. If we didn't ignore children with focus proxy, tabbing
from a QSpinBox would lead us to find the inner QLineEdit, which
(because of its proxy), would lead us back to the QSpinBox. And
therefore not be able to tab out.
But ignoring the focus proxy has other problems. Normally a focus
proxy is the next sibling to the widget it acts as a proxy for, and
tabbing to the widget will therefore appear correct. But if the
focus proxy is not the next sibling, the logic will fail, since
the tab would anyway give focus to the next sibling. This becomes very
apparent if the focus proxy is a child of the widget, since then
its likely that the focus proxy is not the _first_ child among all
the children. So tabbing to the parent would not give focus to
the proxy.
This patch will change this logic so that you are allowed to tab to a
widget with a focus proxy. But we check that if you do so, you actually
end up moving focus in the right direction. If not, we ignore it like
before. This will ensure that we tab correctly when dealing with focus
proxies, and especially when focus proxies are used to construct
compound widgets.
[ChangeLog][Widgets] When tabbing to a widget with focus proxy, focus
will now be given to the proxy rather than just being ignored.
Task-number: QTBUG-10907
Change-Id: I66d1da5c941fdd984bb2783cc355ca65b553b5dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Change-Id: I7dbe9c7a91301e0002f9e1827f6d0b495d2b9ec5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test assumes that resizing a QWidget to 0x0 will result in the
QWindow ending up with that size, and hence not being exposed, but
this is not the case. On a QWindow level we treat 0x0 as a trigger
for the platform layer to set the default size, and the window
ends up exposed.
Ideally QWindows should allow 0x0 sizes, but this is a bigger change.
In the meantime, we skip the tests so that other changes can be
integrated without the test failing.
Task-number: QTBUG-61953
Change-Id: Ib17187b4afd1b06eaa76653be18e93abea555b59
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It was grabbing a QLabel without accounting for the size of
the window in the case where the DPI is larger than 1:
FAIL! : tst_QWidget::translucentWidget() Compared values are not the same
Actual (actual.size()) : QSize(32x32)
Expected (expected.size()): QSize(16x16)
Change-Id: I4873f3c6364ee2696f5612d91e6c97c60b2cd915
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
