Removes a warning in the build.
Pick-to: 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17215c40b40333cb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends edd983071e.
Remove redundant calls to AAssetDir_getNextFileName() in
AndroidAbstractFileEngine::setFileName(). It's enough to check
if AAssetManager_open() returns null and AAssetManager_openDir() is
valid for the provided asset file name.
As part of this fix, add some unit tests to cover/ensure assets
listing/iterating works as expected.
Fixes: QTBUG-107627
Pick-to: 6.4 6.2 5.15
Change-Id: I37ae9cb64fbbc60699bb748895f77fd6a34fae1f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
To allow the user to customize the C++ code that QDoc sees, so as to be
able to work-around some limitations on QDoc itself, QDoc defines two
symbols: Q_QDOC and Q_CLANG_QDOC, both of which are "true" during an
entire execution of QDoc.
At a certain point in time, QDoc allowed the user the choice between a
custom C++ parser and a Clang based one.
The Q_QDOC symbol would always be defined while the Q_CLANG_QDOC symbol
would be defined only when the Clang based parser was chosen.
In more recent times, QDoc always uses a Clang based parser, such that
both Q_CLANG_QDOC and Q_QDOC are always defined, making them equivalent.
To avoid using different symbols, and the possible confusion and
fragmentation that derives from it, all usages of Q_CLANG_QDOC are now
replaced by the equivalent usages of Q_QDOC.
Change-Id: I5810abb9ad1016a4c5bbea99acd03381b8514b3f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
I wrongly assumed we can't query a value with an empty name ""
during the previous refactor commit, however, in Windows registry,
an empty name for a value means the default value of a key, we can
read and write it through the "Default" name.
Remove the wrong assert to fix the crash when we are trying to query
a default value of a key.
Add a new test case to test this kind of scenarios.
Amends commit 40523b68c1
Fixes: QTBUG-107794
Change-Id: Idacbcb86df4435a8c1ca1c19121599390ae8f3d3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The libraryMap only stored the file path, so we couldn't load two
versions of the same library as we'd find the other version already
loaded. Change the map to index by file name and version (using a NUL as
separator, since that can't appear in file names).
[ChangeLog][QtCore][QLibrary] Fixed a bug that caused QLibrary to be
unable to load two different versions of a library of a given name at the
same time. Note that this is often inadviseable and loading the second
library may cause a crash.
Pick-to: 6.4
Change-Id: I12a088d1ae424825abd3fffd171ce3bb0590978d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Regression introduced by commit 8d4eb292b2
in 6.0, when QTaggedPointer was introduced. We set the tag even when the
loading failed and failed to reset it because d = {} retains the tag.
Pick-to: 6.2 6.4
Fixes: QTBUG-103387
Change-Id: Ie4bb662dcb274440ab8bfffd170a07aa9c9ecfca
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QLibrary intentionally does not unload on destruction, so failing tests
may leave libraries already loaded and cause further tests to fail
because of that. So add a cleanup() method to unload everything we may
have loaded.
Note that QLibrary::unload() sets its state to NotLoaded after one
successful call, so we must recreate the object in case it had been
load()ed multiple times.
Pick-to: 6.2 6.4
Change-Id: I12a088d1ae424825abd3fffd171d133c678f910a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The "qhash" test relied on the fact that those four elements would
produce a different order with a zero and a non-zero seed. But since
commit b057e32dc4 removed the setting of a
deterministic non-zero seed, this test had a 1 in 4! chance of failing.
Since 4! = 24, 128 retries should be more than enough to ensure we do
find at least hash seed that provokes a different order.
Fixes: QTBUG-107725
Change-Id: I3c79b7e08fa346988dfefffd171ee61b79ca5489
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Various places were knowingly provoking warnings without telling QTest
to check for and suppress those warnings. Some others did check for
this warning, so let's consistently suppress the noise.
Change-Id: I71b9829680c7a513f4d8fbb3c57442875a6c2dc4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For some reason the QTest::ignoreMessage() was conditioned on the type
being tested being Array; however, the warning is in fact produced for
all types. So anticipate it for all and make the test log less noisy.
Change-Id: I78681624252ff8a71f080204f8b031609ddac468
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were two copies of the 0x1D157 row and we can't remember why.
So change one of them to the Chakma digit 3 (a spiral) and annote all
three test-cses with what meaning Unicode assigns to them.
Change-Id: I95837588bd5944f7f2c39c8438d9076e844e4dd0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The row 27 that was positioned before row 01, as if it were meant to
be numbered row 00, was identical to the row 27 that appeared after
row 26. Since row 26 was the other case dealing with the null
QRectF(), I kept the one after it instead of renumbering row 00 and
deleting row 27.
Change-Id: I3585839184233f1f1629280ac9e5b25110c155c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use key(i) rather than valueToKey(value) as the Sha3_* alias Kekkak_*
or RealSha3_*. This way, we still test all members of the enum,
without duplicating row keys (albeit the aliases duplicate values).
Change-Id: I6acba5ffdf5b68294031d609a76b37ca8fad9d94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both countBits() and datastream() had two copies of an all-zeros test
with 35 zeros. Removed the second, in each case.
Change-Id: I5dec4765236ae870c30828dae0f04b8902a100f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
/Zc:lambda seems buggy. Although in my experiments it works well
for 99% Qt repos, it seems some tests will trigger the bug and it
also blocks some new commits. So disable it for now, it's not stable
enough.
Now that this check is disabled, the workaround for tst_qstringapisymmetry
is also not needed anymore, so remove the workaround as well.
Partially reverts commit 8cb832090a
Change-Id: Icf0ecbbaa6262522470e5f5dea05705985ab18f1
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The zlib convenience API we've been using so far has two problems:
- On Windows-64, where sizeof(long) == 4, the use of ulong for sizes
meant that we could not compress data compressable on other 64-bit
platforms (Unix). While zstream also uses ulong, being a stream API,
it allows feeding data in chunks. The total_in and total_out members
are only required for gzip compression and are otherwise just
informational. They're unsigned, so their overflow does not cause
UB. In summary, using zstream + deflate() allows us to compress more
than 4GiB of data even on Windows-64.
- On all platforms, we always allocated the output buffer in such a
way as to accommodate the pathological case of random, incompressible
data, so the output buffer was larger than the input. Using zstream
+ deflate(), we can start with a smaller buffer, then let zlib pick
up where it left off when it ran out of output buffer space, saving
memory in the common case that compression meaningfully reduces the
size. To avoid the first few rounds of reallocations, we continue to
use zlib's compressBound() for input less than 256KiB.
This completely fixes the compression side of QTBUG-106542 and
QTBUG-104972.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-104972
Fixes: QTBUG-106542
Change-Id: Ia7e6c38403906b35462480fd611b482f05a5c59c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add at least a few, so size() isn't completely untested.
Pick-to: 6.4 6.2 5.15
Change-Id: I500d28f7efb30ab578808d8fefb6ea57949edc2e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A violation of coding style (requiring braces on multi-line bodies
of conditionals) was accompanied by a mis-indented else block.
Fix a long line while I'm about it.
Change-Id: Ibe9cf15eadbe9ef58138d7876e5e2c5a14a92fd4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Pull out the arbitrary factor of three as a named constant and
document its arbitrariness once.
Pull out the mask and bit used in each function's loop to the outer
layer of the loop, since they don't depend on the inner loop variable
(or the random value generated in that loop).
Use QTest::addRow() instead of constructing a string to pass to
newRow().
Change-Id: Ifacbcb390e00828fd47f51b0c73d0ad5f6bc8bdb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The tests for indexOf() and lastIndexOf() had duplicate data row tags,
due to only using the needle and haystack, although some tests
differed only in start position. Include start position where needed.
Change-Id: I197d415265ab1a805f2d36fb88aec92ea8646f7a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Enclosing one string in each substring of another does not need to
repeat the empty substring of the latter. Extracting the empty
substring from different positions doesn't get different results.
In the process, tidy up the code a bit.
Change-Id: Ic66febbdadeaac0c466f4f1174d831a991d31e20
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
There were two copies of the same line in mid_data(), leading to
duplicated data row tags.
Change-Id: Ia21e855ff781b13fe18c932cff48cb0aabd12750
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The zlib convenience API we've been using so far has two problems:
- On Windows-64, where sizeof(long) == 4, the use of ulong for sizes
meant that we could not uncompress data compressed on other 64-bit
platforms (Unix). While zstream also uses ulong, being a stream API,
it allows feeding data in chunks. The total_in and total_out members
are only required for gzip compression and are otherwise just
informational. They're unsigned, so their overflow does not cause
UB. In summary, using zstream + inflate() allows us to decompress
more than 4GiB of data even on Windows-64.
- On all platforms, if the size hint in the header was too short, we'd
double the output buffer size and try again, from scratch. Using
zstream + inflate(), we still need to reallocate, but we can then
let zlib pick up where it left off when it ran out of output buffer
space. In all but the most pathological cases, copying the
already-decoded data instead of re-decoding it again should be
faster, esp. if QArrayData uses realloc() instead of malloc() +
free() to grow the buffer.
We also now directly allocate at least as much output buffer as we
have input, to cut the first few rounds of reallocations when the
expectedSize was created, as qCompress still does, using modulo
arithmetic mod 4GiB instead of saturation arithmethic.
Factor the growing of the output buffer into a wrapper function,
flate(), which can be reused when porting qCompress().
This completely fixes the uncompression side of QTBUG-106542 and
QTBUG-104972.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104972
Task-number: QTBUG-106542
Change-Id: I97f55ea322c24db1ac48b31c16855bc91708e7e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is a combination of Q_UNREACHABLE() with a return statement.
ATM, the return statement is unconditionally included. If we notice
that some compilers warn about return after __builtin_unreachable(),
then we can map Q_UNREACHABLE_RETURN(...) to Q_UNREACHABLE() without
having to touch all the code that uses explicit Q_UNREACHABLE() +
return.
The fact that Boost has BOOST_UNREACHABLE_RETURN() indicates that
there are compilers that complain about a lack of return after
Q_UNREACHABLE (we know that MSVC, ICC, and GHS are among them), as
well as compilers that complained about a return being present
(Coverity). Take this opportunity to properly adapt to Coverity, by
leaving out the return statement on this compiler.
Apply the macro around the code base, using a clang-tidy transformer
rule:
const std::string unr = "unr", val = "val", ret = "ret";
auto makeUnreachableReturn = cat("Q_UNREACHABLE_RETURN(",
ifBound(val, cat(node(val)), cat("")),
")");
auto ignoringSwitchCases = [](auto stmt) {
return anyOf(stmt, switchCase(subStmt(stmt)));
};
makeRule(
stmt(ignoringSwitchCases(stmt(isExpandedFromMacro("Q_UNREACHABLE")).bind(unr)),
nextStmt(returnStmt(optionally(hasReturnValue(expr().bind(val)))).bind(ret))),
{changeTo(node(unr), cat(makeUnreachableReturn,
";")), // TODO: why is the ; lost w/o this?
changeTo(node(ret), cat(""))},
cat("use ", makeUnreachableReturn))
);
where nextStmt() is copied from some upstream clang-tidy check's
private implementation and subStmt() is a private matcher that gives
access to SwitchCase's SubStmt.
A.k.a. qt-use-unreachable-return.
There were some false positives, suppressed them with NOLINTNEXTLINE.
They're not really false positiives, it's just that Clang sees the
world in one way and if conditonal compilation (#if) differs for other
compilers, Clang doesn't know better. This is an artifact of matching
two consecutive statements.
I haven't figured out how to remove the empty line left by the
deletion of the return statement, if it, indeed, was on a separate
line, so post-processed the patch to remove all the lines matching
^\+ *$ from the diff:
git commit -am meep
git reset --hard HEAD^
git diff HEAD..HEAD@{1} | sed '/^\+ *$/d' | recountdiff - | patch -p1
[ChangeLog][QtCore][QtAssert] Added Q_UNREACHABLE_RETURN() macro.
Change-Id: I9782939f16091c964f25b7826e1c0dbd13a71305
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For the full list, please refer to [1].
Needed to change the qstringapisymmetry unit test:
In theory we don't need the array to be static and it did compile
without any problems so far, indeed. However, with this patch applied,
MSVC complains that the lambda function below can't access the array.
I don't understand why, because we use [&] in the lambda and it should
capture all the variables in theory, but in reality it failed to
capture this variable in the end. And making the variable static
solves this issue. Maybe it's a MSVC bug.
Already tested locally. Most Qt repos build without any issues,
only very few repos are not tested, as my local environment
can't build them.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/zc-conformance?view=msvc-170
Change-Id: I658427aa171ee1ae26610d0c68640b2f50789f15
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Unix systems have got crash loggers in the past 15-20 years, notably
macOS and Linux (abrtd, systemd-coredumpd, etc.). By setting the core
dump limit to zero, those tools should be mostly inhibited from running
and thus not interfere with the parent process' timeouts. Even for
systems without core dump loggers, disabling the writing of a core dump
to the filesystem should also help.
Pick-to: 6.4
Change-Id: I12a088d1ae424825abd3fffd171d112d0671effe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This corresponds to Unicode version 15.0.0.
Added the following scripts:
* Kawi
* Nag Mundari
Full support of these scripts requires harfbuzz version 5.2.0,
this version adds support for Unicode 15.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/5.2.0
Fixes: QTBUG-106810
Change-Id: Ib06c526e49b0f01ef9f21123bcf875c6b19f2601
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There were two data8 rows; and no data9, so that was easy to fix.
Change-Id: I8191de142e1a3be57bf1ad97e63d5780f2859fea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two test cases were called "base 2, negative"; one of them use -1 as
value, so s/negative/minus 1/ for it.
Change-Id: Ia5da3952d93976262cc8423d4e75ec19dab9a088
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using simply the pattern didn't work so well when some patters are
used repeatedly, on different haystacks. So include the haystack
in the tag name. Remove one straight up duplicate row.
Change-Id: Ib46364581f23c493e83d75e6d04ab09e4329a3a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
One "empty" test was base ten, the other left the code to work out the
base. Change the latter's name to reflect that difference.
Change-Id: I4918eb0d293420df315d86e532787950b8f05be8
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The addCommonCborData() helper had two identical rows named simple255.
It only needs one.
Change-Id: Ie934c31f373069788c3ef774fde8956b54814e67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two of the uuidA test cases had an open-brace for the string and no
close; one of them ended with a space (which, apparently, is valid).
Since the data-tag was constructed by formatting the string in a
fixed-width field, padding with spaces, these two cases coincided.
Fortunately the only uuidB test-case had closing as well as opening
braces, so we can just switch the test for "trailing space is not an
error" to use it, instead.
Change-Id: I7068d40145c6b6b3b72777b029282850b1d1ea81
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mate Barany <mate.barany@qt.io>
The first "test1 text" test-case related to a file called test1.txt;
but the second related to a file called test2.txt; I suspect a
copy-and-paste with incomplete post-edit. In any case, change the
latter's data tag to reflect the difference.
Change-Id: I8354a3d1bd18715d6717dfd0962aa70faefbee90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was using the same tags twice each, giving no clue to the
difference between the two test-cases for each.
Change-Id: I645b01c0c4008a766e505047cb05cc22640ee129
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
It's not clear why this test repeats each test-case five times, but
give the duplicates distinct names, at least.
Change-Id: I4a098d90c3fe6f61842745c1d5f62047fe13a9b5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were simply two copies of the same row-adding code.
Change-Id: I12240dedf2649c314ad32984f4de9d6b9bf280d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Two rows named "hex" were a collision we should avoid.
The two "showpos" rows could be better distinguished.
Change-Id: I43727041eb00e6883ce8b34b346de5e2a63f1a34
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Now I can read it and work out how to rename the duplicated data tag.
Change-Id: I78f2b3f38f955fa6e6a88cb87cfca6e4f755a177
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
