The openglextensions module is dicontinued and removed in Qt 6.
Change-Id: I0b98f9b6575026828c188786aeb5c1a62de1f8a3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This only arises when the system locale tells us to use its zero as
our zero digit, since no CLDR locale uses it by default. Adapt an
MS-specific QLocale::system() test to use Suzhou numbering, so as to
test this.
While updating the locale-restoration code to also restore the digits
being set in that test, add restore code for the long time format,
where previously only the short time format was restored. Add a
comment to make it less likely one of those shall be missed in future.
Fixes: QTBUG-85409
Change-Id: I343324bb563ee0e455dfe77d4825bf8c3082ca30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One can now write
with special_cased_file("base/dir", "foo.txt") as fh:
do_something(fh)
This makes the code of processJson a bit clearer, and it allows us to
easily add more files that support the special handling comments.
Change-Id: Ia25d0c0d48df1802c5e2123d05345a88b42a2981
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The SpecialCaseHandler supported only two file names: "CMakeLists.txt"
and "configure.cmake". Generalize the code to allow for arbitrary file
names. We will use this in a subsequent commit.
Change-Id: I0adada91409a11a369fd1cf2d6ab21cc8f28ba0f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Certain resources and compiled jar files have to be copied into the
non-prefix build dir location. They were previously only installed,
which doesn't do anything in a non-prefix build.
Change pro2cmake to generate code that places the compiled java
jars into QT_BUILD_DIR, so that non-prefix builds work.
Place the module dependencies xml files into lib folder in non-prefix
builds.
Don't special case the output and install location of the Android QPA
plugin.
Task-number: QTBUG-85399
Change-Id: I4ac9d3929ea8ecc95ec99a77e621ad2121b68832
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qtdeclarative as of 41864db3b61d9e81a9fe4906918d2cd3d6d32a0c always
retains the resources, so there's no manual facility for retaining
left. Remove the code.
Change-Id: If79b66683897b5f430844e13c0230e41a2cf061d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If a file was part of a resource that has a non-empty base directory,
the script generated set_source_files_properties calls to the file
path without including the base dir, which means the command did
nothing.
The script should set the QT_SKIP_QUICKCOMPILER on the full file path
if a base dir is present, similar to how the alias handled.
Refactor the alias property writing code to write all properties
into the command that uses the full correct path.
Change-Id: Ic75d51ecf60eef3ada9bd6ca26882de3447896e9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The APIs will be reintroduced as part of the new platform interface
API where appropriate.
Clients that still depend on the platform headers can include it
via QT += platformheaders-private.
Change-Id: Ifbd836d833d19f3cf48cd4f933d7fe754c06d2d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This adds the CMake equivalent to the classical -device-option key=value
configure argument:
-DQT_QMAKE_DEVICE_OPTIONS=key1=value1[;keyN=valueN]
The keys and values get dumped verbatim into qdevice.pri.
This patch also ports the machineTuple configure test. Its result is
written into qdevice.pri as value for the GCC_MACHINE_DUMP variable.
Change-Id: I29f2323fd87639fafaed99ec7446c7ee75504705
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Our .prl files embedded an absolute path to the OpenGL.tbd file. This
obviously breaks their usage when used on another machine when no SDK
exists.
To fix that we need to use a "-framework OpenGL" linker flag instead
of linking against the absolute path library.
To convince CMake to do that, we have to create a wrapping
OpenGL target which sets an appropriate INTERFACE_LINK_LIBRARIES
property.
So create a FindWrapOpenGL find module to do that on darwin platforms.
Adjust helper.py and our build system to use it.
This tangentially amends 38cd18384f
because it recreates the FindWrapOpenGL module, but for a different
purpose.
Task-number: QTBUG-85240
Task-number: QTBUG-84781
Change-Id: I3498c19157ae31db5099e6edfb9d71490187f1d3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
You can write the following in a qmldir file these days:
import QtQuick auto
import QtQml 2.4
pro2cmake should understand and convert these to cmake.
Change-Id: Ica1728de0c8d7a0b2b5aa341d20e60b23dfa7fe1
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
* Assume UTF-8 on all Unix like systems
* Export some functions to be able to compile QTextCodec once
moved to Qt5Compat.
Task-number: QTBUG-75665
Change-Id: I52ec47a848bc0ba72e9c7689668b1bcc5d736c29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The change fixes the labels to show up correctly in the configure
summary.
It also allows enabling the sanitizer via the feature flags, e.g.
-DFEATURE_sanitize_address=ON.
Finally the qtbase sanitizer option is saved in QtBuildInternalsExtra
so that repos built after qtbase have the same sanitizer options
enabled.
Change-Id: Ic9d9e3ce3c7ebbc244ced2e6d163d1ac8ee06b12
Fixes: QTBUG-84721
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The qt_internal_apply_gc_binaries function should apply both compile
and link flags, not just link flags.
The flags should be applied publically to all consumers of Bootstrap
regardless if the gc_binaries feature is enabled.
The flags should be applied publically to Core only in case if the
feature is enabled (aka for static builds only).
Change-Id: Id42af0d9b527004d74c04eff2c9e3c2be1e76aac
Fixes: QTBUG-84461
Task-number: QTBUG-83929
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
[ChangeLog][General] The QtOpenglExtensions module has been
discontinued. It provided only convenience functionality for certain
direct OpenGL usage. With the new RHI graphics API abstraction, that
is no longer a primary use case. Applications that still need to
access that API have a number of alternative options, including
QOpenGLExtraFunctions.
Fixes: QTBUG-84085
Change-Id: I272af61c69ebcec207b576d67d08b59623d485ec
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This patch allows tools to be built for the target platform when the
QT_BUILD_TOOLS_WHEN_CROSSCOMPILING parameter is set at configuration
time.
To avoid naming conflicts, the target tools are suffixed with "_native".
The qt_get_tool_target_name() function can be used to get the tool name
for both scenarios (cross and non-cross compilation).
Extend pro2cmake to refer to the right target name for tools.
The relevant write_XXX functions have a new target_ref parameter that
will be "${target_name}" for tools and literally the target name for
everything else.
Fixes: QTBUG-81901
Change-Id: If4efbc1fae07a4a3a044dd09c9c06be6d517825e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The ANGLE removal's manual configure.cmake changes are now replaced
by updating the conversion script's special cases instead.
Change-Id: I06317fe0202b25bd9f9524da14e1bb0ccbb30cc1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When writing the qt6_qml_type_registration call, make sure to write
the set(QT_QML_MODULE_INSTALL_QMLTYPES TRUE) statement only if an
explicit path was provided via
QMLTYPES_INSTALL_DIR / QT_QML_MODULE_INSTALL_DIR.
This will remove the QT_QML_MODULE_INSTALL_QMLTYPES property from
many examples and tests in qtdeclarative, thus not installing the
.qmltypes file into the Qt prefix, thus polluting it.
Task-number: QTBUG-84403
Change-Id: I5c64d42915896d14f2591cbb64d73d912dbf7c7d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
so that they can be used with Q_STATIC_ASSERT().
Also constify more another array.
Change-Id: I1e7208127e06abb33af9bdc46712657af5dc98fe
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The next time qurltlds_p.h is generated, array sizes shall be explicit.
Also added some helpful comments. And updated copyright date.
Change-Id: I2bc9a78bcc2982845fce75a413e2048b0bfd12a0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QMake variables are always string lists, but some variables are used to
represent single string values. People tend to fill those variables with
multiple values and expect them to be joined by spaces.
Exhibit A: qtdeclarative/tools/qml/qml.pro
QMAKE_TARGET_DESCRIPTION = QML Runtime
QMake supports this for many values. Do the same for Scope.get_string().
Change-Id: I6af22bc1bfed07a4d8eac94d7315051a5bcb7a4d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We should search for the values of function names rather than
the mapping key.
Change-Id: Iedef7fcf4d716ff7f6d277d9626d9dc2dd781401
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There are (at least) two implementations of the low-level case-folding
algorithm, one of which (for QChar::toLower()) seems to be wrong (it
doesn't deal with special cases which expand to more than one code
point).
The algoithm hidden in QString and entangled with the QString
detaching code makes reusing the code much harder.
At the same time, the dependency of the algorithm on the unicode
tables makes exposing a non-allocating result type in the public API
hard. std::u16string would be an alternative if we can assure that all
implementations use SSO with at least four characters.
So, for the time being, leave this as internal API for use in an
upcoming QStringView::toLower() as well as case-insensitive hashing.
Change-Id: Iabb2611846f6176776aa20e634f44d8464f3305c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When building examples standalone, 'INSTALL_EXAMPLESDIR' may be
undefined.
The converted .pro files now check whether the variable is
set to prevent installation into unexpected locations.
Fixes: QTBUG-81797
Change-Id: I9f97568923c8103011a41d9af7cfe02dd1e40b56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And create one for QtBase at the same time.
Fixes: QTBUG-83835
Change-Id: Icc6b022165a57bd4e22c23bdb0016522b99a5b80
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
